Search NASA⌕ Search

SEARCH · Search NASA

Results for “Scattering matrix”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Dual-precipitates enhance fatigue resistance in an additively manufactured high-entropy alloy

To accomplish the intense desire of high-strength materials for enhanced energy-efficiency, recent research applies a combined strategy of additive-manufacturing and precipitation-strengthening in high entropy alloys. In a context, Al 0.2 Co 1.5 CrFeNi 1.5 Ti 0.3 nanoprecipitation-strengthened system was developed, demonstrating very convincing strength and toughness. Moreover, additive-manufacturing facilitated additional strength by well-decorated cell-boundaries with blocky L2 1 precipitates and homogeneously distributed L1 2 precipitates. However, fatigue research of this alloy remained unexplored despite being the main precursor for structural applications. In this study low-cycle fatigue behavior of this alloy in both as-built and precipitation-strengthened (aged) conditions has been explored, combined with in-situ neutron diffraction investigation. Findings revealed a substantial cyclic-stress profile and a notable fatigue-life below ±0.50% strain-amplitude, exceeding 10 5 cycles at ±0.30% strain-amplitude. These demonstrate the potential to carry higher payloads with marked engineering-reliability. Residual-stress estimation revealed strain-compatibility between the matrix and L1 2 precipitate, indicating a crack-initiation immune interface. A comparative examination of dislocation character revealed shifting towards pure edge-character in aged alloy indicates precipitates promoted planar-slip during deformation.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Back-to-back dijet production in DIS at arbitrary Bjorken x: TMD gluon distributions to twist-3 accuracy

We derive the gluon transverse-momentum-dependent (TMD) operator structure of back-to-back\\\\r\\\\nquark–antiquark dijet production in deep inelastic scattering at arbitrary Bjorken-x to twist-3 ac\\\\r\\\\ncuracy. Working at leading order in the strong coupling and in the kinematic regime where the\\\\r\\\\ntransverse momentum imbalance of the jets is much smaller than their individual transverse mo\\\\r\\\\nmenta, we perform a systematic gradient expansion of the quark propagator in a background gluon\\\\r\\\\nfield. This expansion organizes multiple interactions with the target in terms of longitudinal Wilson\\\\r\\\\nlines and gauge-invariant field-strength insertions, yielding a TMD description valid beyond the\\\\r\\\\nstrict high-energy eikonal (x → 0) approximation. We obtain explicit cross sections for longitudi\\\\r\\\\nnally and transversely polarized virtual photons, identifying all contributing gluon TMD operators\\\\r\\\\nup to twist-3, including structures involving F+−, Fij, and three-gluon correlators. The full lon\\\\r\\\\ngitudinal phase eixP+z− associated with Bjorken-x is retained throughout. In the small-x limit,\\\\r\\\\nour results reproduce the known sub-eikonal expressions obtained in the Color Glass Condensate\\\\r\\\\nframework, establishing a direct connection between the general-x TMD expansion and high-energy\\\\r\\\\nfactorization. We further reduce the operator basis using equations of motion, minimizing the num\\\\r\\\\nber of independent nonperturbative matrix elements entering the cross section. This work provides\\\\r\\\\na systematic foundation for extending TMD analyses of dijet production beyond leading twist, es\\\\r\\\\ntablishing a unified operator framework valid at arbitrary Bjorken-x that smoothly interpolates\\\\r\\\\nbetween moderate- and small-x descriptions of gluon TMDs.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Design and calibration of an optically segmented single volume scatter camera for neutron imaging

The Optically Segmented Single Volume Scatter Camera (OS-SVSC) aims to image neutron sources for non-proliferation applications using the kinematic reconstruction of elastic double-scatter events. Our prototype system consists of 64 EJ-204 organic plastic scintillator bars, each measuring 5mm × 5mm × 200mm and individually wrapped in Teflon tape. The scintillator array is optically coupled to two silicon photomultiplier ArrayJ-60035 64P-PCB arrays, each comprised of 64 individual 6x6mm J-Series sensors arranged in an 8 × 8 array. We report on the design details, including component selections, mechanical design and assembly, and the electronics system. The described design leveraged existing off-the-shelf solutions to support the rapid development of a phase 1 prototype. Several valuable lessons were learned from component and system testing, including those related to the detector's mechanical structure and electrical crosstalk that we conclude originates in the commercial photodetector arrays and the associated custom breakout cards. We detail our calibration efforts, beginning with calibrations for the electronics, based on the IRS3D application-specific integrated circuits, and their associated timing resolutions, ranging from 3090ps. With electronics calibrations applied, energy and position calibrations were performed for a set of edge bars using 22 Na and 90 Sr, respectively, reporting an average resolution of 12.07±0.03mm for energy depositions between 900keVee and 1000keVee. We further demonstrate a position calibration method for the internal bars of the matrix using cosmic-ray muons as an alternative to emission sources that cannot easily access these bars, with an average measured resolution of 14.86+-0.29mm for depositions between 900keVee and 1000keVee. The coincident time resolution reported between pairs of bars measured up to 400ps from muon acquisitions. Energy and position calibration values measured with muons are consistent with those obtained using particle emission sources.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Correcting for filter-based aerosol light absorption biases at the Atmospheric Radiation Measurement program's Southern Great Plains site using photoacoustic measurements and machine learning

Abstract. Measurement of light absorption of solar radiation by aerosols is vital for assessing direct aerosol radiative forcing, which affects local and global climate. Low-cost and easy-to-operate filter-based instruments, such as the Particle Soot Absorption Photometer (PSAP), that collect aerosols on a filter and measure light attenuation through the filter are widely used to infer aerosol light absorption. However, filter-based absorption measurements are subject to artifacts that are difficult to quantify. These artifacts are associated with the presence of the filter medium and the complex interactions between the filter fibers and accumulated aerosols. Various correction algorithms have been introduced to correct for the filter-based absorption coefficient measurements toward predicting the particle-phase absorption coefficient (Babs). However, the inability of these algorithms to incorporate into their formulations the complex matrix of influencing parameters such as particle asymmetry parameter, particle size, and particle penetration depth results in prediction of particle-phase absorption coefficients with relatively low accuracy. The analytical forms of corrections also suffer from a lack of universal applicability: different corrections are required for rural and urban sites across the world. In this study, we analyzed and compared 3 months of high-time-resolution ambient aerosol absorption data collected synchronously using a three-wavelength photoacoustic absorption spectrometer (PASS) and PSAP. Both instruments were operated on the same sampling inlet at the Department of Energy's Atmospheric Radiation Measurement program's Southern Great Plains (SGP) user facility in Oklahoma. We implemented the two most commonly used analytical correction algorithms, namely, Virkkula (2010) and the average of Virkkula (2010) and Ogren (2010)–Bond et al. (1999) as well as a random forest regression (RFR) machine learning algorithm to predict Babs values from the PSAP's filter-based measurements. The predicted Babs was compared against the reference Babs measured by the PASS. The RFR algorithm performed the best by yielding the lowest root mean square error of prediction. The algorithm was trained using input datasets from the PSAP (transmission and uncorrected absorption coefficient), a co-located nephelometer (scattering coefficients), and the Aerosol Chemical Speciation Monitor (mass concentration of non-refractory aerosol particles). A revised form of the Virkkula (2010) algorithm suitable for the SGP site has been proposed; however, its performance yields approximately 2-fold errors when compared to the RFR algorithm. To generalize the accuracy and applicability of our proposed RFR algorithm, we trained and tested it on a dataset of laboratory measurements of combustion aerosols. Input variables to the algorithm included the aerosol number size distribution from the Scanning Mobility Particle Sizer, absorption coefficients from the filter-based Tricolor Absorption Photometer, and scattering coefficients from a multiwavelength nephelometer. The RFR algorithm predicted Babs values within 5 % of the reference Babs measured by the multiwavelength PASS during the laboratory experiments. Thus, we show that machine learning approaches offer a promising path to correct for biases in long-term filter-based absorption datasets and accurately quantify their variability and trends needed for robust radiative forcing determination.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Thermal conductivity evaluation of ion irradiated Si 3 N 4 and ZrN ceramics using spatial domain thermoreflectance

Nitride ceramics have been investigated for different applications in the nuclear industry, such as space nuclear power, fusion reactor diagnostics and plasma heating, inert matrix fuels, and accident tolerant fuels. Although thermal conductivity remains one of the most important properties to track following irradiation, traditional techniques such as laser flash and xenon flash are limited to bulk sample characterization, which requires lengthy and cost-consuming neutron irradiation. This work used spatial domain thermoreflectance (SDTR) for the micrometer-scale measurement of thermal conductivity in 15 MeV Ni ion-irradiated silicon nitride and zirconium nitride from 1 to 50 dpa and 300 to 700 °C. Here, the SDTR-measured unirradiated thermal conductivity was found to be consistent with the published data on bulk samples. Electrically conductive ZrN exhibits modest reduction after irradiation which is minimal at the highest irradiation temperatures. In electrically insulating Si 3 N 4 , the reduction is more significant and unlike ZrN, the reduction remains significant even at a higher irradiation temperature. The thermal resistance evolution following irradiation was compared with lattice swelling, which was determined using grazing incidence x-ray diffraction, and radiation-induced defects were observed using transmission electron microscopy. A saturation value was observed between 15 and 50 dpa for thermal conductivity degradation in both nitride ceramics and a direct correlation with high-temperature defect recombination was observed, as well as the potential presence of additional carrier scattering mechanisms.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Influence of helium bubbles on the bulk equation of state of gold under static compression

Nuclear materials often evolve into two-phase systems comprising a bulk matrix with dispersed inert-gas bubbles. The presence of these bubbles can have consequences to the thermomechanical response of materials and is a key life-limiting factor in some nuclear fuel forms. Understanding the behavior of these two-phase, bubble-matrix systems is, thus, important to improved predictive models and frameworks for many nuclear materials applications. While temperature excursions of these two-phase systems have been characterized, fewer studies have focused on the evolution of inert-gas bubbles under pressure. Here, in this paper, we use x-ray tools to interrogate a He-implanted gold foil to determine the pressure-dependent evolution of the individual components (Au matrix + bubbles), and we compare that total pressure dependence to theoretical equation-of-state descriptions based on mixing rules.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Celestial geometry

Celestial holography expresses S-matrix elements as correlators in a CFT living on the night sky. Poincaré invariance imposes additional selection rules on the allowed positions of operators. As a consequence, n-point correlators are only supported on certain patches of the celestial sphere, depending on the labeling of each operator as incoming/outgoing. Here we initiate a study of the celestial geometry, examining the kinematic support of celestial amplitudes for different crossing channels. We give simple geometric rules for determining this support. For n ≥ 5, we can view these channels as tiling together to form a covering of the celestial sphere. Our analysis serves as a stepping off point to better understand the analyticity of celestial correlators and illuminate the connection between the 4D kinematic and 2D CFT notions of crossing symmetry.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Soft factorisation and exponentiation from Schwinger-space geometry

Infrared divergences in Quantum Field Theory govern the low-energy dynamics of many physical theories, and their understanding is a crucial ingredient in predicting the outcomes of collider experiments. We present a novel approach to deriving the structure of these divergences by employing the Schwinger parametrization of Feynman integrals. After using tropical geometry to identify divergent limits, we study the all-orders asymptotic properties of Feynman diagrams via matrix manipulations of graph Laplacians, which allows us to analyse their IR behaviour systematically. We explicitly demonstrate the soft-hard factorization of the integrand for a broad class of diagrams, and reveal that when written in terms of worldline distances, topologically distinct diagrams asymptote to the same integrand at leading order in the soft limit. In particular, for the case of Quantum Electrodynamics (with massive fermions), we use this fact to show how ladder-type diagrams combine in Schwinger-parameter space to yield the correct exponentiated soft anomalous dimension. This framework provides a foundation for extending these methods to more complex theories like Quantum Chromodynamics and offers a pathway towards a systematic understanding of infrared divergences in perturbative amplitudes.

Factorization↗
DOE OSTI2023

Data and scripts associated with a manuscript investigating impacts of solid phase extraction on freshwater organic matter optical signatures and mass spectrometry pairing

This data package is associated with the publication “Investigating the impacts of solid phase extraction on dissolved organic matter optical signatures and the pairing with high-resolution mass spectrometry data in a freshwater system” submitted to “Limnology and Oceanography: Methods.” This data is an extension of the River Corridor and Watershed Biogeochemistry SFA’s Spatial Study 2021 (https://doi.org/10.15485/1898914). Other associated data and field metadata can be found at the link provided. The goal of this manuscript is to assess the impact of solid phase extraction (SPE) on the ability to pair ultra-high resolution mass spectrometry data collected from SPE extracts with optical properties collected on ambient stream samples. Forty-seven samples collected from within the Yakima River Basin, Washington were analyzed dissolved organic carbon (DOC, measured as non-purgeable organic carbon, NPOC), absorbance, and fluorescence. Samples were subsequently concentrated with SPE and reanalyzed for each measurement. The extraction efficiency for the DOC and common optical indices were calculated. In addition, SPE samples were subject to ultra-high resolution mass spectrometry and compared with the ambient and SPE generated optical data. Finally, in addition to this cross-platform inter-comparison, we further performed and intra-comparison among the high-resolution mass spectrometry data to determine the impact of sample preparation on the interpretability of results. Here, the SPE samples were prepared at 40 milligrams per liter (mg/L) based on the known DOC extraction efficiency of the samples (ranging from ~30 to ~75%) compared to the common practice of assuming the DOC extraction efficiency of freshwater samples at 60%. This data package folder consists of one main data folder with one subfolder (Data_Input). The main data folder contains (1) readme; (2) data dictionary (dd); (3) file-level metadata (flmd); (4) final data summary output from processing script; and (5) the processing script. The R-markdown processing script (SPE_Manuscript_Rmarkdown_Data_Package.rmd) contains all code needed to reproduce manuscript statistics and figures (with the exception of that stated below). The Data_Input folder has two subfolders: (1) FTICR and (2) Optics. Additionally, the Data_Input folder contains dissolved organic carbon (DOC, measured as non-purgeable organic carbon, NPOC) data (SPS_NPOC_Summary.csv) and relevant supporting Solid Phase Extraction Volume information (SPS_SPE_Volumes.csv). Methods information for the optical and FTICR data is embedded in the header rows of SPS_EEMs_Methods.csv and SPS_FTICR_Methods.csv, respectively. In addition, the data dictionary (SPS_SPE_dd.csv), file level metadata (SPS_SPE_flmd.csv), and methods codes (SPS_SPE_Methods_codes.csv) are provided. The FTICR subfolder contains all raw FTICR data as well as instructions for processing. In addition, post processed FTICR molecular information (Processed_FTICRMS_Mol.csv) and sample data (Processed_FTICRMS_Data.csv) is provided that can be directly read into R with the associated R-markdown file. The Optics subfolder contains all Absorbance and Fluorescence Spectra. Fluorescence spectra have been blank corrected, inner filter corrected, and undergone scatter removal. In addition, this folder contains Matlab code used to make a portion of Figure 1 within the manuscript, derive various spectral parameters used within the manuscript, and used for parallel factor analysis (PARAFAC) modeling. Spectral indices (SPS_SpectralIndices.csv) and PARAFAC outputs (SPS_PARAFAC_Model_Loadings.csv and SPS_PARAFAC_Sample_Scores.csv) are directly read into the associated R-markdown file. We acknowledge the Yakama Nation as owners and caretakers of the lands where we collected some of these data. We thank the Confederated Tribes and Bands of the Yakama Nation Tribal Council and Yakama Nation Fisheries for working with us to facilitate sample collection and optimization of data usage according to their values and worldview.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Dynamical coupled-channel models for hadron dynamics

Dynamical coupled-channel (DCC) approaches parametrize the interactions and dynamics of two and more hadrons and their response to different electroweak probes. The inclusion of unitarity, three-body channels, and other properties from scattering theory allows for a reliable extraction of resonance spectra and their properties from data. Here, we review the formalism and application of the ANL-Osaka, the Juelich-Bonn-Washington, and other DCC approaches in the context of light baryon resonances from meson, (virtual) photon, and neutrino-induced reactions, as well as production reactions, strange baryons, light mesons, heavy meson systems, exotics, and baryon-baryon interactions. Finally, we also provide a connection of the formalism to study finite-volume spectra obtained in Lattice QCD, and review applications involving modern statistical and machine learning tools.

Amplitude analysis↗
DOE OSTI2022

Tuning the Properties of Nanocomposites by Trapping Them in Deep Metastable States

We report the interfacial region formed in a polymer matrix around nanoparticles (NPs) controls many macroscopic properties of polymer nanocomposites (PNCs). However, understanding the factors controlling structure and properties of interfacial region remains a challenge. We demonstrated that the initial trapping of polymer chains at surfaces of NPs in solution strongly affects the macroscopic properties of PNCs. The most surprising result is that the differences in properties of PNCs persist even after an extremely long thermal annealing time. We ascribe the observed changes to the formation of interfacial layer that is trapped in a deep metastable state already in solution. Furthermore, presented analysis suggests that PNC equilibration time is defined by the chain desorption time that can be extremely long and, in some cases, even not accessible on a reasonable experimental time scale. These results highlight the importance of polymer solution concentrations on the formation of interfacial layer and the macroscopic properties of PNCs.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Corners and islands in the S-matrix bootstrap of the open superstring

We bootstrap the Veneziano superstring amplitude in 10 dimensions from the bottom-up. Starting with the most general maximally supersymmetric Yang-Mills EFT, we input information about the lowest-lying massive states, which we assume contribute via tree-level exchanges to the 4-point amplitude. We show the following: (1) if there is only a single state at the lowest mass, it must be a scalar. (2) Assuming a string-inspired gap between the mass of this scalar and any other massive states, the allowed region of Wilson coefficients has a new sharp corner where the Veneziano amplitude is located. (3) Upon fixing the next massive state to be a vector, the EFT bounds have a one-parameter family of corners; these would correspond to models with linear Regge trajectories of varying slopes, one of which is the open superstring. (4) When the ratio between the massive scalar coupling and the tr F 4 coefficient is fixed to its string value, the spin and mass of the second massive state is determined by the bootstrap and the Veneziano amplitude is isolated on a small island in parameter space. Finally, we compare with other recent bootstraps approaches, both the pion model and imposing Regge-inspired maximal spin constraints.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Effect of Ligand Polarity on the Internal Dipoles and Ferroelectric Distortion in BaTiO 3 Nanocubes

Here, surface adsorbates and surrounding matrix species have been demonstrated to affect the properties of nanoscale ferroelectrics and nanoscale ferroelectric composites; potentially counteracting performance losses that can occur in small particle sizes. In this work, the effects of nonpolar oleic acid (OA) and polar tetrafluoroborate (BF 4 - ) ligand capping on the surface of various sizes of BaTiO 3 nanocubes have been investigated with combined neutron diffraction and neutron pair distribution function (PDF), density functional theory (DFT), and ab initio molecular dynamics (AIMD) methods. The low real space PDF region provides an unobstructed view of rhombohedral (split short and long) Ti-O distances in BaTiO 3 nanocubes, mimicking the well-established order-disorder local structure found in bulk BaTiO 3 . Interestingly, the intermediate-range order in nanocubes is found to be orthorhombic, rather than tetragonal. It is concluded that polar ligands adsorbed at BaTiO 3 surfaces stabilize the correlation length scale of local rhombohedral distortions in ferroelectric nanoparticles relative to nonpolar ligands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Landau diagrams in AdS and S-matrices from conformal correlators

Quantum field theories in AdS generate conformal correlation functions on the boundary, and in the limit where AdS is nearly flat one should be able to extract an S-matrix from such correlators. We discuss a particularly simple position-space procedure to do so. It features a direct map from boundary positions to (on-shell) momenta and thereby relates cross ratios to Mandelstam invariants. This recipe succeeds in several examples, includes the momentum-conserving delta functions, and can be shown to imply the two proposals in based on Mellin space and on the OPE data. Interestingly the procedure does not always work: the Landau singularities of a Feynman diagram are shown to be part of larger regions, to be called ‘bad regions’, where the flat-space limit of the Witten diagram diverges. To capture these divergences we introduce the notion of Landau diagrams in AdS. As in flat space, these describe on-shell particles propagating over large distances in a complexified space, with a form of momentum conservation holding at each bulk vertex. As an application we recover the anomalous threshold of the four-point triangle diagram at the boundary of a bad region.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Strong Interaction Dynamics and Fermi $β$ Decay in the Nucleon and the Nucleus

Nuclear super-allowed β decay has been used to obtain tight limits on the value of the CKM matrix element V ud that is important for unitarity tests and, therefore, for tests of the standard model. Current requirements on precision are so intense that effects formerly thought too small to matter are now considered relevant. This article is a brief review of personal efforts to include the effects of strong interactions on Fermi β decay. First, I examine the role of isospin violation in the decay of the neutron. The size of the necessary correction depends upon detailed strong-interaction dynamics. The isospin violating parts of the nucleon wave function, important at the low energy of β decay, can be constrained by data taken at much higher energies, via measurements, for example, of ed → e'π ± + X reactions at Jefferson Laboratory. The next point of focus is on the role of nuclear short-ranged correlations, which affect the value of the correction needed to account for isospin violation in extracting the value of V ud . The net result is that effects previously considered as irrelevant are now considered relevant for both neutron and nuclear β decay.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Measurement of t -channel production of single top quarks and antiquarks in pp collisions at 13 TeV using the full ATLAS Run 2 data sample

The production of single top quarks and top antiquarks via the t-channel exchange of a virtual W boson is measured in proton-proton collisions at a centre-of-mass energy of 13 TeV at the LHC using 140 fb -1 of ATLAS data. The total cross-sections are determined to be σ(tq) = 137$^{+8}_{-8}$ pb and σ($\bar{t}q$) = 84$^{+6}_{-5}$ pb for top-quark and top-antiquark production, respectively. The combined cross-section is found to be σ(tq + $\bar{t}q$) = 221$^{+13}_{-13}$ pb and the cross-section ratio is R t = σ(tq) / σ($\bar{t}q$) = 1.636$^{+0.036}_{-0.034}$. The predictions at next-to-next-to-leading-order in quantum chromodynamics are in good agreement with these measurements. The predicted value of R t using different sets of parton distribution functions is compared with the measured value, demonstrating the potential to further constrain the functions when using this result in global fits. The measured cross-sections are interpreted in an effective field theory approach, setting limits at the 95% confidence level on the strength of a four-quark operator and an operator coupling the third quark generation to the Higgs boson doublet: -0.37 < C$^{3,1}_{Qq}$ /Λ 2 < 0.06 and -0.87 < C$^{3}_{ΦQ}$ / Λ 2 < 1.42. The constraint |V tb | > 0.95 at the 95% confdence level is derived from the measured value of σ(tq + $\bar{t}q$), assuming that the Wtb interaction is a left-handed weak coupling and that |V tb | $\gg$ |V td |, |V ts |. In a more general approach, pairs of CKM matrix elements involving top quarks are simultaneously constrained, leading to confdence contours in the corresponding two-dimensional parameter spaces.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Measurements of the production cross-section for a Z boson in association with b -jets in proton-proton collisions at √s = 13 TeV with the ATLAS detector

This paper presents a measurement of the production cross-section of a Z boson in association with b-jets, in proton-proton collisions at √s = 13 TeV with the ATLAS experiment at the Large Hadron Collider using data corresponding to an integrated luminosity of 35.6 fb -1 . Inclusive and differential cross-sections are measured for events containing a Z boson decaying into electrons or muons and produced in association with at least one or at least two b-jets with transverse momentum p T > 20 GeV and rapidity |y| < 2.5. Predictions from several Monte Carlo generators based on leading-order (LO) or next-to-leading-order (NLO) matrix elements interfaced with a parton-shower simulation and testing different flavour schemes for the choice of initial-state partons are compared with measured cross-sections. We find that the 5-flavour number scheme predictions at NLO accuracy agree better with data than 4-flavour number scheme ones. This is because the 4-flavour number scheme predictions underestimate data in events with at least one b-jet.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Measurement of single top-quark production in the s-channel in proton–proton collisions at $\sqrt{s}$ = 13 TeV with the ATLAS detector

A measurement of single top-quark production in the s-channel is performed in proton–proton collisions at a centre-of-mass energy of 13 TeV with the ATLAS detector at the CERN Large Hadron Collider. The dataset corresponds to an integrated luminosity of 139 fb –1 . The analysis is performed on events with an electron or muon, missing transverse momentum and exactly two $b$-tagged jets in the final state. A discriminant based on matrix element calculations is used to separate single-top-quark s-channel events from the main background contributions, which are top-quark pair production and $W$-boson production in association with jets. The observed (expected) signal significance over the background-only hypothesis is 3.3 (3.9) standard deviations, and the measured cross-section is $σ$ = ${8.2}_{-2.9}^{+3.5}$ pb, consistent with the Standard Model prediction of $σ^{SM}$ = ${10.32}_{–0.36}^{+0.40}$ pb.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗