Search NASA⌕ Search

SEARCH · Search NASA

Results for “SiO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Materials Data on Si48O107 by Materials Project

(SiO2)96(O2)11 is quartz (alpha)-like structured and crystallizes in the orthorhombic Imm2 space group. The structure is three-dimensional and consists of twenty-two water molecules and one SiO2 framework. In the SiO2 framework, there are seven inequivalent Si sites. In the first Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There is one shorter (1.62 Å) and three longer (1.63 Å) Si–O bond length. In the second Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There is one shorter (1.62 Å) and three longer (1.63 Å) Si–O bond length. In the third Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There is one shorter (1.62 Å) and three longer (1.63 Å) Si–O bond length. In the fourth Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There is one shorter (1.62 Å) and three longer (1.63 Å) Si–O bond length. In the fifth Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There are a spread of Si–O bond distances ranging from 1.62–1.64 Å. In the sixth Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. All Si–O bond lengths are 1.63 Å. In the seventh Si site, Si is bonded to four O atoms to form corner-sharing SiO4 tetrahedra. There is two shorter (1.62 Å) and two longer (1.63 Å) Si–O bond length. There are thirty inequivalent O sites. In the first O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the second O site, O is bonded in a bent 150 degrees geometry to two Si atoms. The O–Si bond length is 1.63 Å. In the third O site, O is bonded in a bent 150 degrees geometry to two equivalent Si atoms. In the fourth O site, O is bonded in a bent 150 degrees geometry to two equivalent Si atoms. Both O–Si bond lengths are 1.63 Å. In the fifth O site, O is bonded in a bent 150 degrees geometry to two equivalent Si atoms. Both O–Si bond lengths are 1.63 Å. In the sixth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. The O–Si bond length is 1.63 Å. In the seventh O site, O is bonded in a bent 150 degrees geometry to two equivalent Si atoms. In the eighth O site, O is bonded in a bent 150 degrees geometry to two equivalent Si atoms. In the ninth O site, O is bonded in a bent 150 degrees geometry to two equivalent Si atoms. In the tenth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the eleventh O site, O is bonded in a bent 150 degrees geometry to two equivalent Si atoms. Both O–Si bond lengths are 1.63 Å. In the twelfth O site, O is bonded in a bent 150 degrees geometry to two equivalent Si atoms. In the thirteenth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. The O–Si bond length is 1.63 Å. In the fourteenth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. The O–Si bond length is 1.63 Å. In the fifteenth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. The O–Si bond length is 1.63 Å. In the sixteenth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. The O–Si bond length is 1.63 Å. In the seventeenth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. The O–Si bond length is 1.63 Å. In the eighteenth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the nineteenth O site, O is bonded in a bent 150 degrees geometry to two equivalent Si atoms. In the twentieth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. The O–Si bond length is 1.63 Å. In the twenty-first O site, O is bonded in a bent 150 degrees geometry to two equivalent Si atoms. In the twenty-second O site, O is bonded in a bent 150 degrees geometry to two equivalent Si atoms. Both O–Si bond lengths are 1.62 Å. In the twenty-third O site, O is bonded in a bent 150 degrees geometry to two Si atoms. In the twenty-fourth O site, O is bonded in a bent 150 degrees geometry to two Si atoms. The O–Si bond length is 1.62 Å. In the twenty-fifth O site, O is bonded in a bent 150 degrees geometry to two equivalent Si atoms. In the twenty-sixth O site, O is bonded in a bent 150 degrees geometry to two equivalent Si atoms. Both O–Si bond lengths are 1.62 Å. In the twenty-seventh O site, O is bonded in a bent 150 degrees geometry to two Si atoms. The O–Si bond length is 1.63 Å. In the twenty-eighth O site, O is bonded in a bent 150 degrees geometry to two equivalent Si atoms. There is one shorter (1.62 Å) and one longer (1.63 Å) O–Si bond length. In the twenty-ninth O site, O is bonded in a bent 150 degrees geometry to two equivalent Si atoms. In the thirtieth O site, O is bonded in a bent 150 degrees geometry to two equivalent Si atoms.

36 MATERIALS SCIENCE↗

Materials Data on Si9C4NO18 by Materials Project

(C)2C2N(SiO2)9 is Low Tridymite-derived structured and crystallizes in the monoclinic C2 space group. The structure is three-dimensional and consists of four aziridine molecules, four ethyne molecules, and one SiO2 framework. In the SiO2 framework, there are ten inequivalent Si4+ sites. In the first Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There is two shorter (1.62 Å) and two longer (1.63 Å) Si–O bond length. In the second Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There are a spread of Si–O bond distances ranging from 1.61–1.63 Å. In the third Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There is three shorter (1.62 Å) and one longer (1.63 Å) Si–O bond length. In the fourth Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There is three shorter (1.62 Å) and one longer (1.63 Å) Si–O bond length. In the fifth Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. All Si–O bond lengths are 1.62 Å. In the sixth Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There is three shorter (1.62 Å) and one longer (1.63 Å) Si–O bond length. In the seventh Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There are a spread of Si–O bond distances ranging from 1.61–1.63 Å. In the eighth Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There are a spread of Si–O bond distances ranging from 1.61–1.63 Å. In the ninth Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. There are a spread of Si–O bond distances ranging from 1.61–1.63 Å. In the tenth Si4+ site, Si4+ is bonded to four O2- atoms to form corner-sharing SiO4 tetrahedra. All Si–O bond lengths are 1.62 Å. There are nineteen inequivalent O2- sites. In the first O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the second O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the third O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the fourth O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the fifth O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the sixth O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the seventh O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the eighth O2- site, O2- is bonded in a linear geometry to two Si4+ atoms. In the ninth O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the tenth O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the eleventh O2- site, O2- is bonded in a bent 150 degrees geometry to two equivalent Si4+ atoms. In the twelfth O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the thirteenth O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the fourteenth O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the fifteenth O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the sixteenth O2- site, O2- is bonded in a bent 150 degrees geometry to two Si4+ atoms. In the seventeenth O2- site, O2- is bonded in a linear geometry to two Si4+ atoms. In the eighteenth O2- site, O2- is bonded in a distorted bent 150 degrees geometry to two Si4+ atoms. In the nineteenth O2- site, O2- is bonded in a bent 150 degrees geometry to two equivalent Si4+ atoms.

36 MATERIALS SCIENCE↗

Densification of Reaction Bonded Silicon Nitride with the Addition of Fine Si Powder Effects on the Sinterability and Mechanical Properties

The densification behavior and strength of sintered reaction bonded silicon nitrides (SRBSN) that contain Lu2O3-SiO2 additives were improved by the addition of fine Si powder. Dense specimens (relative density: 99.5%) were obtained by gas-pressure sintering (GPS) at 1850oC through the addition of fine Si. In contrast, the densification of conventional specimens did not complete at 1950oC. The fine Si decreased the onset temperature of shrinkage and increased the shrinkage rate because the additive helped the compaction of green bodies and induced the formation of fine Si3N4 particles after nitridation and sintering at and above 1600oC. The amount of residual SiO2 within the specimens was not strongly affected by adding fine Si powder because most of the SiO2 layer that had formed on the fine Si particles decomposed during nitridation. The maximum strength and fracture toughness of the specimens were 991 MPa and 8.0 MPa m1/2, respectively.

Lee, Sea-Hoon↗

Thermal Evaluation of Metal Oxides on Silica Supports

Atomic level engineering of nanoparticles (NPs) with ability to precisely tune its functional properties can help us realize many promising applications in catalytic science. Such a bottom-up approach would require fundamental level understanding of nucleation and subsequent chemical evolution of nanoparticles during synthesis process. In particular, transition metal based nanoparticles such as Cobalt (Co), Nickel (Ni), Iron (Fe), Paladium (Pd), and Platinum (Pt) can serve as catalysts for many important reactions such as syngas conversion, hydrogenation-dehydrogenation reactions and hydro-deoxygenation reactions. The porous SiO2 is widely used as support medium due to their chemical inertness under reducible and reactive chemical environments often encountered during catalytic process. Nevertheless, even chemically benign SiO2 can have interaction with catalyst particles under high temperatures and adversely affect catalytic activity due to the presence of reactive surface functional groups. Although the influence of the support on catalyst activity and the selectivity is widely studied with respect to the strong metal-support interaction (SMSI) and more recently on the electronic effect of metal-support interaction (EMSI), the choice of support and the catalyst preparation method are still mostly determined by the empirical optimization. For this study, we focus on local structural evolution of cobalt and nickel oxide nanoparticles and its interaction with SiO2 support using multi-modal spectroscopic approach involving X-ray absorption spectroscopy (XAS), nuclear magnetic resonance (NMR) and density functional theory (DFT) based computational methods.

Murugesan, Vijayakumar↗

Coated U3Si2 pellets with enhanced water and steam oxidation resistance

A method of forming a water resistant boundary on a fissile material for use in a water cooled nuclear reactor is described. The method comprises coating the fissile material, such as a pellet of U3Si2 and/or the grain boundaries, to a desired thickness with a suitable coating material, such as atomic layer deposition or a thermal spray process. The coating material may be any non-reactive material with a solubility at least as low as that of UO2. Exemplary coating materials include ZrSiO4, FeCrAl, Cr, Zr, Al—Cr, CrAl, ZrO2, CeO2, TiO2, SiO2, UO2, ZrB2, Na2O—B2O3—SiO2—Al2O3 glass, Al2O3, Cr2O3, carbon, and SiC, and combinations thereof. The water resistant layer may be overlayed with a burnable absorber layer, such as ZrB2 or B2O3—SiO2 glass.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

TOXICITY OF AMORPHOUS SILICA NANOPARTICLES IN MOUSE KERATINOCYTES

The present study was designed to examine the uptake, localization and the cytotoxic effects of well-dispersed amorphous silica nanoparticles in mouse keratinocytes (HEL-30). Mouse keratinocytes were exposed for 24h to various concentrations of amorphous silica nanoparticles in homogeneous suspensions of average size distribution (30, 48, 118 and 535 nm SiO2) then assessed for uptake and biochemical changes. Results of transmission electron microscopy revealed all sizes of silica were taken up into the cells and localized into the cytoplasm. The lactate dehydrogenase (LDH) assay shows LDH leakage was dose- and size-dependent with exposure to 30 and 48 nm nanoparticles. However, no LDH leakage was observed for either 118 or 535 nm nanoparticles. The mitochondrial viability assay (MTT) showed significant toxicity for 30 and 48 nm at high concentrations (100 g/mL) compare to the 118 and 535 nm particles. Further studies were carried out to investigate if cellular reduced GSH and mitochondria membrane potential are involved in the mechanism of SiO2 toxicity. The redox potential of cells (GSH) was reduced significantly at concentrations of 50, 100 and 200 g/mL at 30 nm nanoparticle exposures. However, silica nanoparticles larger than 30 nm showed no changes in GSH levels. Reactive oxygen species (ROS) formation did not show any significant change between controls and the exposed cells. In summary, amorphous silica nanoparticles below 100 nm induced cytotoxicity suggest size-of the particles is critical to produce biological effects.

59 BASIC BIOLOGICAL SCIENCES↗

Fast-regenerable sulfur dioxide absorbents for lean-burn diesel engine emission control

It is known that sulfur oxides contribute significantly and deleteriously to the overall performance of lean-burn diesel engine aftertreatment systems, especially in the case of NOx traps. A Ag-based, fast regenerable SO2 absorbent has been developed and will be described. Over a temperature range of 300oC to 550oC, it absorbs almost all of the SO2 in the simulated exhaust gases during the lean cycles and can be fully regenerated by the short rich cycles at the same temperature. Its composition has been optimized as 1 wt% Pt-5wt%Ag-SiO2, and the preferred silica source for the supporting material has been identified as inert Cabosil fumed silica. The thermal instability of Ag2O under fuel-lean conditions at 230oC and above makes it possible to fast regenerate the sulfur-loaded absorbent during the following fuel-rich cycles. Pt catalyst helps reducing Ag2SO4 during rich cycles at low temperatures. And the chemically inert fumed SiO2 support gives the absorbent long term stability. This absorbent shows great potential to work under the same lean-rich cycling conditions as those imposed on the NOx traps, and thus, can protect the downstream particulate filter and the NOx trap from sulfur poisoning.

33 ADVANCED PROPULSION SYSTEMS↗

Facile electrostatic self-assembly of silicon/reduced graphene oxide porous composite by silica assist as high performance anode for Li-ion battery

Silicon(Si)/graphene composite has been regarded as one of the most promising candidates for next generation anode materials with high power and energy density in lithium ion batteries. Introduction of graphene in Si anodes could improve the electronic conductivity, suppress the severe volume expansion of Si, and facilitate the formation of stable solid electrolyte interphase, etc. However, traditionally mechanical mixing of Si and graphene cannot realize uniform distribution of Si particles on the graphene sheets, which would largely weaken the effectiveness of the graphene in the composite. In this work, nano-Si/reduced graphene oxide porous composite (p Si/rGO) has been fabricated by a facile electrostatic self-assembly approach via using SiO2 as the sacrificial template. Compared with the simply mechanically mixed nano-Si and rGO (Si/rGO), the nano-Si particles could be more uniformly dispersed among the rGO sheets in the p Si/rGO, which significantly increases its electronic conductivity. Moreover, the drastic volume expansion of nano-Si during repeated lithiation/delithiation cycles also has been effectively accommodated by the large number of pores left after removing the SiO2 template in the composite. Thus, the p Si/rGO presented largely enhanced electrochemical performances, showing a high reversible capacity up to 1849?mA?h?g-1 at 0.2?A?g-1 with good capacity retention, and high rate capability (535?mA?h?g-1 at 2?A?g-1).

Silicon, Reduced graphene oxide, Electrostatic sel↗

Stable, Microfabricated Thin Layer Chromatography Plates without Volume Distortion on Patterned, Carbon and Al2O3-Primed Carbon Nanotube Forests

In a recent report (Song, J.; et al., Advanced Functional Materials 2011, 21, 1132-1139) some of us described the fabrication of thin layer chromatography (TLC) plates from patterned carbon nanotube (CNT) forests, which were directly infiltrated/coated with silicon by low pressure chemical vapor deposition (LPCVD) of silicon using SiH4. Following infiltration, the nanotubes were removed from the assemblies and the silicon simultaneously converted to SiO2 in a high temperature oxidation step. However, while straightforward, this process had some shortcomings, not the least of which was some distortion of the lithographically patterned features during the volume expansion that accompanied oxidation. Herein we overcome theis issue and also take substantial steps forward in the microfabrication of TLC plates by showing: (i) A new method for creating an adhesion promotion layer on CNT forests by depositing a few nanometers of carbon followed by atomic layer deposition (ALD) of Al2O3. This method for appears to be new, and X-ray photoelectron spectroscopy confirms the expected presence of oxygen after carbon deposition. ALD of Al2O3 alone and in combination with the carbon on patterned CNT forests was also explored as an adhesion promotion layer for CNT forest infiltration. (ii) Rapid, conformal deposition of an inorganic material that does not require subsequent oxidation: fast pseudo-ALD growth of SiO2 via alumina catalyzed deposition of tris(tert-butoxy)silanol onto the carbon/Al2O3-primed CNT forests. (iii) Faithful reproduction of the features in the masks used to microfabricate the TLC plates (M-TLC) this advance springs from the previous two points. (iv) A bonded (amino) phase on a CNT-templated microfabricated TLC plate. (v) Fast, highly efficient (125,000 - 225,000 N/m) separations of fluorescent dyes on M-TLC plates. (vi) Extensive characterization of our new materials by TEM, SEM, EDAX, DRIFT, and XPS. (vii) A substantially lower process temperature for the removal of the CNT scaffold as a result of the (already oxidized) materials used in this study.

36 MATERIALS SCIENCE↗

Hydrodechlorination of 1,2-Dichloroethane Catalyzedby Dendrimer-Derived Pt-Cu/SiO2 Catalysts

Dendrimer-metal-nanocomposites (DMNs) were used as precursors to prepare SiO2 supported monometallic Pt, Cu and bimetallic Pt-Cu catalysts with Pt/Cu atomic ratios of 1:1 (Pt50Cu50) and 1:3 (Pt25Cu75). After impregnation of these DMNs onto the support, the catalysts were thermally treated and activated following an optimized protocol. Scanning transmission electron microscopy (STEM) shows that the metal nanoparticles in dendrimer-derived SiO2-supported catalysts are smaller and have a more narrow size distribution than those in conventional catalysts prepared using corresponding metal salts via the wet impregnation method. Slow deactivation was observed for hydrodechlorination of 1,2-dichloroethane over monometallic Cu catalysts, which showed an activity about one to two orders of magnitude lower than that of the Pt-containing catalysts. Hydrodechlorination of 1,2-dichloroethane over Pt and Pt50Cu50 catalysts mainly produces ethane and the selectivity towards ethane increases with temperature. For Pt25Cu75 catalyst, the selectivity towards ethane decreases in favor of ethylene. The overall activity decreases with increasing Cu loading in the catalysts. Activity based on surface Pt sites suggests the formation of bi-functional surfaces in Pt25Cu75 catalyst favoring C-Cl bond scission on Cu sites and hydrogenation of intermediate .CH2CH2. on Pt sites. Furthermore, kinetic analyses suggest different reaction mechanisms for hydrodechlorination of 1,2-dichloroethane over Pt and Cu-enriched surfaces in the Pt-Cu bimetallic catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ARRHENIUS MODEL FOR HIGH-TEMPERATURE GLASS VISCOSITY WITH A CONSTANT PRE-EXPONENTIAL FACTOR

A simplified form of the Arrhenius equation, ln η = A + B(x)/T, where η is the viscosity, T the temperature, x the composition vector, and A and B the Arrhenius coefficients, was fitted to glass-viscosity data for the processing temperature range (the range at which the viscosity is within 1 to 103 Pa.s) while setting A = constant and treating B(x) as a linear function of mass fractions of major components. Fitting the Arrhenius equation to over 550 viscosity data of commercial glasses and approximately 1000 viscosity data of glasses for nuclear-waste glasses resulted in the A values of -11.35 and -11.48, respectively. The R2 value ranged from 0.92 to 0.99 for commercial glasses and was 0.98 for waste glasses. The Arrhenius models estimate viscosities for melts of commercial glasses containing 42 to 84 mass% SiO2 within the temperature range of 1100 to 1550°C and viscosity range of 5 to 400 Pa.s and for waste glasses containing 32 to 60 mass% SiO2 within the temperature range of 850 to 1450°C and viscosity range of 0.4 to 250 Pa.s.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Monte Carlo Simulations of the Dissolution of Borosilicate Glasses in Near-Equilibrium Conditions

Monte Carlo simulations were performed to investigate the mechanisms of glass dissolution as equilibrium conditions are approached in both static and flow-through conditions. The glasses studied are borosilicate glasses in the compositional range (80-x)% SiO2 (10+x/2)% B2O3 (10+x/2)% Na2O, where 5 < x < 30%. In static conditions, dissolution/condensation reactions lead to the formation, for all compositions studied, of a blocking layer composed of polymerized Si sites with principally 4 connections to nearest Si sites. This layer forms atop the altered glass layer and shows similar composition and density for all glass compositions considered. In flow-through conditions, three main dissolution regimes are observed: at high flow rates, the dissolving glass exhibits a thin alteration layer and congruent dissolution; at low flow rates, a blocking layer is formed as in static conditions but the simulations show that water can occasionally break through the blocking layer causing the corrosion process to resume; and, at intermediate flow rates, the glasses dissolve incongruently with an increasingly deepening altered layer. The simulation results suggest that, in geological disposal environments, small perturbations or slow flows could be enough to prevent the formation of a permanent blocking layer.

borosilicate glasses↗

Efficacy of a Solution-Based Approach for Making Sodalite Waste Forms for an Oxide Reduction Salt Utilized in the Reprocessing of Used Uranium Oxide Fuel

This paper describes various approaches for making sodalite with a LiCl-Li2O oxide reduction salt used to recover uranium from used oxide fuel. The approaches include sol-gel and solution-based synthesis processes. As-made products were mixed with 5 and 10 mass% of a Na2O-B2O3-SiO2 glass binder and these, along with product without a binder, were heated using either a cold-press-and-sinter method or hot uniaxial pressing. The results demonstrate the limitation of sodalite yield due to the fast intermediate reactions between Na+ and Cl- to form halite in solution and Li2O and SiO2 to form lithium silicates (e.g., Li2SiO3 or Li2Si2O5) in the calcined and sintered pellets. The results show that pellets can be made with high sodalite fractions (~92 mass%) and low porosities using a solution-based approach and this LiCl-Li2O salt.

electrochemical↗

Modelling the local atomic structure of molybdenum in nuclear waste glasses with ab initio molecular dynamics simulations

The nature of chemical bonding of molybdenum in high level nuclear waste glasses has been elucidated by ab initio molecular dynamics simulations. Two compositions, (SiO2)57.5 – (B2O3)10 – (Na2O)15 – (CaO)15 – (MoO3)2.5 and (SiO2)57.3 – (B2O3)20 – (Na2O)6.8 – (Li2O)13.4 – (MoO3)2.5 , were considered in order to investigate the effect of ionic and covalent components on the glass structure and the formation of the crystallisation precursors (Na2MoO4 and CaMoO4). The coordination environments of Mo cations and the corresponding bond lengths calculated from our model are in excellent agreement with experimental observations. The analysis of the first coordination shell reveals two different types of molybdenum host matrix bonds in the lithium sodium borosilicate glass. Based on the structural data and the bond valence model, we demonstrate that the Mo cation can be found in a redox state and the molybdate tetrahedron can be connected with the borosilicate network in a way that inhibits the formation of crystalline molybdates. These results significantly extend our understanding of bonding in Mo-containing nuclear waste glasses and demonstrate that tailoring the glass composition to specific heavy metal constituents can facilitate incorporation of heavy metals at high concentrations. K.K. was supported through the Impact Studentship scheme at UCL co-funded by the IHI Corporation and UCL. P.V.S. thanks the Royal Society, which supported preliminary work on this project, and the Laboratory Directed Research and Development program at PNNL, a multiprogram national laboratory operated by Battelle for the U.S. Department of Energy. Via our membership of the UK's HEC Materials Chemistry Consortium, which is funded by EPSRC (EP/L000202), this work used the ARCHER UK National Supercomputing Service (http://www.archer.ac.uk).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Model for Phosphosilicate Glass Deposition via POCl3 for Control of Phosphorus Dose in Si

Effective control of diffused phosphorus profiles in crystalline silicon requires detailed understanding of the doping process. We develop a model and analyze concentration profiles within the deposited phosphosilicate glass (PSG) for a range of POCl3 conditions. During predeposition, a PSG layer with composition nearly independent of process conditions forms. This layer is separated from Si by a thin SiO2 layer. There is also strong accumulation of P at the SiO2-Si interface. A simple linear-parabolic model cannot fully explain the kinetics of thickness and dose; while an improved model including oxygen dependence and dose saturation gives better fits to the experiments.

Control↗

Study of Rayleigh–Taylor growth in laser irradiated planar SiO{sub 2} targets at ignition-relevant conditions

Rayleigh–Taylor (RT) growth experiments were performed on the OMEGA laser [T. R. Boehly et al., Opt. Commun. 133, 495 (1997)] using planar SiO{sub 2} targets seeded with a single mode 60-μm wavelength perturbation driven at peak laser intensities up to 9 × 10{sup 14} W/cm{sup 2}. These are the first RT measurements in SiO{sub 2} at conditions relevant to direct-drive inertial confinement fusion ignition. The measured average modulation growth rates agree with the 2-D hydrodynamics code DRACO, providing an important step in the development of target ablators that are robust to RT growth and hot- electron preheat considerations when driven at the intensities required to achieve thermonuclear ignition.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of the crystal structure of SnS thin films by atomic layer deposition

Tin monosulfide, SnS, absorbs visible light and holds promise for thin-film photovoltaics. However, the optoelectronic properties of this material vary among the different structural phases, and control over the phase of vapor deposited SnS thin films is not well understood. In order to study the phases and crystallographic orientations of SnS films, films with thicknesses of 90 nm–750nm were prepared by atomic layer deposition (ALD) at temperatures between 80 °C and 200 °C on amorphous silicon dioxide (a-SiO2) and single-crystal sodium chloride (NaCl). We show that the crystal structures and orientations of the ALD-SnS thin films vary with deposition temperature, film thickness, and substrate. We confirm the presence of metastable cubic π-SnS in co-existence with the thermodynamically stable orthorhombic α-SnS and find that the π phase is more prevalent at lower deposition temperatures. The films grown on a-SiO2 are textured, the degree of texturing increases with lower temperature or higher thickness, and the deposited phase is also thickness dependent. Upon annealing, which is known to promote SnS grain growth, all films revert to orthorhombic α-SnS. The films grown on the NaCl(100) substrate exhibit a much higher degree of texturing and show different preferred orientations dependent on the phase: π-(400) and α-(111) or α-(040). In addition, we demonstrate a proof-of-concept device made from the highly oriented SnS grown on NaCl.

36 MATERIALS SCIENCE↗

Quadratic magnetoresistance across the insulator–metal transition in V4O7 thin films

We present a comparative magnetotransport study of V4O7 thin films grown simultaneously on single-crystal Al2O3 (r-cut) and amorphous SiO2 substrates, to examine substrate-induced effects on electronic transport across the insulator–metal transition (IMT). Temperature-dependent resistivity reveals a broad electronic ordering regime below the IMT, with both films exhibiting similar transition temperatures but differing by nearly an order of magnitude in absolute resistivity. Despite this strong substrate dependence of the resistivity scale, the magnetoresistance remains predominantly quadratic in magnetic field over wide temperature intervals for both substrates. Analysis of the quadratic magnetoresistance defines an effective mobility scale that evolves systematically across the IMT and exhibits a similar temperature dependence for the two films. Structural characterization, including atomic-resolution scanning transmission electron microscopy of the V4O7/Al2O3 interface and azimuthal X-ray diffraction measurements, reveals a sharp interface and well-defined in-plane crystallographic registry for the r-cut film, in contrast to the rotationally averaged in-plane structure expected for films grown on amorphous SiO2. These results indicate that while substrate-controlled structural registry modifies the resistivity scale, the quadratic magnetotransport response across the IMT remains largely robust, providing a consistent diagnostic of electronic transport in V4O7 thin films.

25 ENERGY STORAGE↗