Search NASA⌕ Search

SEARCH · Search NASA

Results for “Simulation and experiment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Satellite monitoring of sea surface pollution

The author has identified the following significant results. Image processing techniques developed are well adapted to the exploration and isolation of local areas which exhibit small temperature differences between themselves and their surroundings. In the worst case of imagery of small areal extent of sea surface having no coastal boundary in the area, there is yet no method of distinguishing unambiguously an oil spill from fog, cloud, the effect produced by shallow sediments, or the effects of naturally occuring thermal fronts. In the case of uniform slicks of liquid North Sea oil in still air, laboratory simulation experiments show that, for oil thicknesses in excess of 1 or 2 mm, there is, under equilibrium conditions, little dependence of oil surface temperature on the thickness of the oil layer. The surface temperature of oil is consistently higher than that of water, the difference being about 1 K at low values of relative humidity, but tending to increase as the relative humidity increases.

Fielder, G.↗

Effects of rotor parameter variations on handling qualities of unaugmented helicopters in simulated terrain flight

A coordinated analysis and ground simulator experiment was performed to investigate the effects on single rotor helicopter handling qualities of systematic variations in the main rotor hinge restraint, hub hinge offset, pitch-flap coupling, and blade lock number. Teetering rotor, articulated rotor, and hingeless rotor helicopters were evaluated by research pilots in special low level flying tasks involving obstacle avoidance at 60 to 100 knots airspeed. The results of the experiment are in the form of pilot ratings, pilot commentary, and some objective performance measures. Criteria for damping and sensitivity are reexamined when combined with the additional factors of cross coupling due to pitch and roll rates, pitch coupling with collective pitch, and longitudinal static stability. Ratings obtained with and without motion are compared. Acceptable flying qualities were obtained within each rotor type by suitable adjustment of the hub parameters, however, pure teetering rotors were found to lack control power for the tasks. A limit for the coupling parameter L sub q/L sub p of 0.35 is suggested.

Talbot, P. D.↗

Effects of power line radiation into the magnetosphere

Observations of the effects of VLF power line radiation on whistler-mode waves in the magnetosphere are reviewed. High-altitude OGO-3 spectral data reveal evidence of enhanced chorus activity over populated regions starting at harmonics of the power-line frequencies. Low-altitude Ariel 3 measurements of 3.2 kHz noise intensity also indicate an enhancement of VLF activity over populated areas and their conjugates, however the relative importance of power line radiation, whistlers and spontaneous emissions is not known. The low-altitude polar-orbiting OGO-4 satellite also observed noise spectra at the harmonics of power line frequencies over industrial regions. Ground observations from Eights and Siple, Antarctica indicate that power line radiation effects on magnetospheric ducted paths peak at 3 kHz and near dawn, and exhibit a pronounced decrease on Sundays in the conjugate region, when power consumption is at a minimum. Experiments simulating power line radiation effects have also been performed. It is suggested that power line radiation effects magnetospheric activity by lowering the threshold for wave growth, with the localization of VLF sources acting to localize corresponding particle precipitation without necessarily affecting global average precipitation.

Helliwell, R. A.↗

The effect of a nonuniform planetary albedo on the interpretation of earth radiation budget observations

The flux density measured at satellite altitude with a fixed field of view radiometer differs from the true flux density reflected by the earth-atmosphere system within the field of view of the radiometer. This difference is due to angular response characteristics of the radiometer, solid angle effects due to geometry, and angular reflectance effects of the earth-atmosphere system. All of these effects lead to uncertainties in the interpretation of instantaneous earth radiation budget measurements. The differences between the true flux density and the measured flux density are shown to be significant when the field of view of the radiometer is large and when the atmosphere has a nonuniform, or spatially dependent, reflectance (albedo). A simulation experiment is described whereby the scene within the field of view of a nadir looking sensor is divided into a large number of equal area elements, each of which reflects radiation with one of two different reflectance models (corresponding to cloud-free and cloudy areas). The conditional mean values of the measured flux density, given values of the true flux density, are shown to differ significantly from the conditional means of the inverse problem, that of finding the mean value of the true flux density given a value for the measured flux density. The differences between the true flux density and the measured flux density are examined as a function of satellite altitude, field of view of the radiometer and solar zenith angle (including the effects of a terminator within the field of view) for both Lambertian and non-Lambertian reflectance models.

King, M. D.↗

A pilot modeling technique for handling-qualities research

A brief survey of the more dominant analysis techniques used in closed-loop handling-qualities research is presented. These techniques are shown to rely on so-called classical and modern analytical models of the human pilot which have their foundation in the analysis and design principles of feedback control. The optimal control model of the human pilot is discussed in some detail and a novel approach to the a priori selection of pertinent model parameters is discussed. Frequency domain and tracking performance data from 10 pilot-in-the-loop simulation experiments involving 3 different tasks are used to demonstrate the parameter selection technique. Finally, the utility of this modeling approach in handling-qualities research is discussed.

Hess, R. A.↗

Flying-qualities criteria for wings-level-turn maneuvering during an air-to-ground weapon delivery task

A moving-base simulator experiment conducted at Ames Research Center demonstrated that a wings-level-turn control mode improved flying qualities for air-to-ground weapons delivery compared with those of a conventional aircraft. Evaluations of criteria for dynamic response for this system have shown that pilot ratings correlate well on the basis of equivalent time constant of the initial response. Ranges of this time constant, as well as digital-system transport delays and lateral-acceleration control authorities that encompassed Level I through Level III handling qualities, were determined.

Sammonds, R. I.↗

Evaluation of a computer-generated perspective tunnel display for flight path following

The display was evaluated by monitoring pilot performance in a fixed base simulator with the vehicle dynamics of a CH-47 tandem rotor helicopter. Superposition of the predicted future vehicle position on the tunnel image was also investigated to determine whether, and to what extent, it contributes to better system performance (the best predicted future vehicle position was sought). Three types of simulator experiments were conducted: following a desired trajectory in the presence of disturbances; entering the trajectory from a random position, outside the trajectory; detecting and correcting failures in automatic flight. The tunnel display with superimposed predictor/director symbols was shown to be a very successful combination, which outperformed the other two displays in all three experiments. A prediction time of 4 to 7 sec. was found to optimize trajectory tracking for the given vehicle dynamics and flight condition. Pilot acceptance of the tunnel plus predictor/director display was found to be favorable and the time the pilot needed for familiarization with the display was found to be relatively short.

Grunwald, A. J.↗

Effects of geometric variables on rub characteristics of Ti-6Al-4V

Experiments simulating rub interactions between Ti-6Al-4V blade tips and various seal materials were conducted. The number of blade tips and the blade tip geometry were varied to determine their effects on rub forces and on wear phenomena. Contact was found to be quite unsteady for all blade tip geometries except for those incorporating deliberately rounded blade tips. The unsteady contact was characterized by long periods of rubbing contact and increasing blade tip that terminated in sudden rapid metal removal, sometimes accompanied by tearing and disruption of porous seal material under the rub surface. A model describing the blade tip loading is proposed and is based on the propagation of an elastic stress wave through the seal material as the seal material is dynamically compressed by the blade tip leading edge.

Bill, R. C.↗

Flying-qualities criteria for wings-level-turn maneuvering during an air-to-ground weapon delivery task

A moving base simulator experiment demonstrated that a wings-level-turn control mode improved flying qualities for air to ground weapon delivery compared with those of a conventionally controlled aircraft. Evaluations of criteria for dynamic response for this system have shown that pilot ratings correlate well on the basis of equivalent time constant of the initial response. Ranges of this time constant, as well as digital system transport delays and lateral acceleration control authorities that encompassed level 1 through 3 handling qualities, were determined.

Sammonds, R. I.↗

Cockpit simulation study of use of flight path angle for instrument approaches

The results of a piloted simulation experiment to evaluate the effect of integrating flight path angle information into a typical transport electronic attitude director indicator display format for flight director instrument landing system approaches are presented. Three electronic display formats are evaluated during 3 deg straight-in approaches with wind shear and turbulence conditions. Flight path tracking data and pilot subjective comments are analyzed with regard to the pilot's tracking performance and workload for all three display formats.

Hanisch, B.↗

Recent advances in structural technology for large deployable and erectable spacecraft

Ultra-low mass deployable and erectable truss structure designs for spacecraft are identified using computerized structural sizing techniques. Extremely slender strut proportions are shown to characterize minimum mass spacecraft which are designed for Shuttle transport to orbit. Analytical results are presented which demonstrate discrete element effects using a recently developed buckling theory for periodic lattice type structures. An analysis of fabrication imperfection effects on the surface accuracy of four different antenna reflector structures is summarized. This study shows the tetrahedral truss to have the greatest potential of the structures examined for application to accurate or large reflectors. A deployable module which can be efficiently transported is identified and shown to have significant potential for application to future antenna requirements. Recent investigations of erectable structure assembly are reviewed. Initial experiments simulating astronaut assembly by extra-vehicular activity (EVA) show that a pair of astronauts can achieve assembly times of 2-5 min/strut. Studies indicate that an automated assembler can achieve times of less than 1 min/strut on an around-the-clock basis.

Bush, H. G.↗

Microwave heating of the lower ionosphere

Changes in the properties of the lower ionosphere due to ohmic heating of the plasma by the solar power satellite (SPS) microwave power beam are considered. The development of a predictive model of the underdense interaction of an electromagnetic beam and the lower ionosphere is described. The extent to which the Platteville and Arecibo experiments simulate SPS conditions is considered.

Meltz, G.↗

Definition of display/control requirements for assault transport night/adverse weather capability

A Helicopter Night Vision System was developed to improve low-altitude night and/or adverse weather assult transport capabilities. Man-in-the-loop simulation experiments were performed to define the minimum display and control requirements for the assult transport mission and investigate forward looking infrared sensor requirements, along with alternative displays such as panel mounted displays (PMD) helmet mounted displays (HMD), and integrated control display units. Also explored were navigation requirements, pilot/copilot interaction, and overall cockpit arrangement. Pilot use of an HMD and copilot use of a PMD appear as both the preferred and most effective night navigation combination.

Milelli, R. J.↗

Analysis of driver performance under reduced visibility

Mathematical models describing vehicle dynamics as well as human behavior may be useful in evaluating driver performance and in establishing design criteria for vehicles more compatible with man. In 1977, a two level model of driver steering behavior was developed, but its parameters were identified for clear visibility conditions only. Since driver performance degrades under conditions of reduced visibility, e.g., fog, the two level model should be investigated to determine its applicability to such conditions. The data analysis of a recently performed driving simulation experiment showed that the model still performed reasonably well under fog conditions, although there was a degradation in its predictive capacity during fog. Some additional parameters affecting anticipation and lag time may improve the model's performance for reduced visibility conditions.

Kaeppler, W. D.↗

Redistribution of volatiles during lunar metamorphism

Thermal release profiles of Pb, Zn, and Cd in sample 66095 (highly shocked breccia with melt rock matrix) showed that these volatiles were mostly present on the surface of the grains. Zn in rusty grains from 66095 was also mostly surface Zn, probably from sphalerite in grain boundaries and cracks. Simulation experiments of volatile transfer showed that Fe, FeCl2, iron phosphide, and troilite (FeS) can be produced and transported during subsolidus reactions. These results suggest that volatiles, rust, schreibersite, and possible siderophiles which are observed in lunar highland samples might have been redistributed during disequilibrium thermal metamorphism in hot ejecta blankets, and were not necessarily introduced by volcanic activity or meteoritic addition.

Cirlin, E. H.↗

Dynamic modeling of structures from measured complex modes

A technique is presented to use a set of identified complex modes together with an analytical mathematical model of a structure under test to compute improved mass, stiffness and damping matrices. A set of identified normal modes, computed from the measured complex modes, is used in the mass orthogonality equation to compute an improved mass matrix. This eliminates possible errors that may result from using approximated complex modes as normal modes. The improved mass matrix, the measured complex modes and the higher analytical modes are then used to compute the improved stiffness and damping matrices. The number of degrees-of-freedom of the improved model is limited to equal the number of elements in the measured modal vectors. A simulated experiment shows considerable improvements, in the system's analytical dynamic model, over the frequency range of the given measured modal information.

Ibrahim, s. R.↗

Determination of normal modes from measured complex modes

A technique is presented for computing a set of normal modes from a set of measured complex modes. The number of elements in the modal vectors, which is equal to the number of measurements, can be larger than the number of modes under consideration. It is also shown that the practice of normal mode approximation to complex modes can lead to very large errors when the modes are too complex. A numerical example and a simulated experiment illustrate the concepts discussed and support the theory presented.

Ibrahim, S. R.↗

Numerical study of a ramjet dump combustor flow field

Increased interest in ramjet propulsion systems with higher performance requirements and tighter constraints on system size and weight has lead to the need for improved techniques for analyzing and designing such systems. A computer program has been developed to analyze the turbulent reacting flow field in a ramjet dump combustor configuration. The program solves the axisymmetric Navier-Stokes and species equations throughout the engine diffuser and combustor providing a unified analysis of the complete engine flow field, including flow separation, fuel-air mixing, and preliminary results with chemical reaction. Details of the program development are given, along with a comparison of program results with data from a dump combustor simulation experiment, to allow assessment of the flow field modeling that is employed.

Drummond, J. P.↗