Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solar control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Wabble gear drive mechanism

The wabble gear principle was applied in the design of a driving mechanism for controlling spacecraft solar panels. The moving elements, other than the output gear, are contained within a hermetically sealed package to prevent escape of lubricants and ingestion of contaminant particles. The driving gear contains one more tooth than the output gear on a concave, conical pitch surface of slightly larger apex angle. The two gears mesh face to face such that engagement takes place at one point along the circumference. The driving gear is not permitted to rotate by virtue of its attachment through the bellows which permits flexure in the pitch and yaw position, but not in roll. As the bearing carrier rotates, the inclined mounting of the bearing causes the driving gear to perform a wabbling, irrotational motion. This wabbling motion causes the contact point between the output gear and the driving gear to traverse around the circumference of the gears once per revolution of the bearing carrier.

Winiarski, F. J.↗

Solar heating and cooling system design and development

Application surveys and performance studies were conducted to determine a solar heating and hot water configuration that could be used in a variety of applications, and to identify subsystem modules that could be utilized in a building block fashion to adapt hardware items to single and multi-family residential and commercial systems. Topics discussed include: subsystem development for the solar collectors, controls, other components, energy management module, and the heating system configuration test. Operational tests conducted at an Illinois farmhouse, and a YWCA in Spokane, Washington are discussed.

Source record↗

Installation package for Hyde Memorial Observatory, Lincoln, Nebraska

Installation information for a solar heating system installed in Hyde Memorial Observatory at Lincoln, Nebraska is presented. This package included a system operation and maintenance manual, hardware brochures, schematics, system operating modes, and drawings. This prototype solar heating system consisted of the following subsystems: solar collector, control, and storage.

Source record↗

Solar Power Satellite antenna phase control system hardware simulation, phase 4: Volume 1: Executive summary

The phase control system is described. Potential sources of phase error are identified and the performance leading to selection of the allowable phase error for each source is summarized. The pilot transmitter, the effects of ionospheric, the master slave returnable timing system (MSRTS), the SPS receiver, and the high power amplifier for dc to microwave conversion are considered separately. Design parameters of the pilot transmitter and spacetenna transponder are presented.

Lindsey, W. C.↗

Solar Power Satellite antenna phase control system hardware simulation, phase 4. Volume 2: Analytical simulation of SPS system performance

The pilot signal parameter optimization and power transponder analyses are presented. The SPS antenna phase control system is modeled and the hardware simulation study described. Ionospheric and system phase error effects and the effects of high power amplifier phase and amplitude jitters are considered. Parameter optimization of the spread spectrum receiver, consisting of the carrier tracking loop and the code tracking loop, is described.

Lindsey, W. C.↗

Solar Power Satellite antenna phase control system hardware simulation, phase 4. Volume 3: SOLARSIM users manual

Documentation of the interactive software package designed to predict the effect of certain electrical and mechanical imperfections on the performance of the SPS system is presented. The capabilities of the SOLARSIM program to quantify the spacetenna performance parameter values are described. The SOLARSIM package can compute the RMS pointing error, title effects, MPTX code tracking loop performance, MPTX carrier tracking loop performance, averaged power pattern, and the power transfer efficiency.

Lindsey, W. C.↗

Power Systems integration

Power systems integration in large flexible space structures is discussed with emphasis upon body control. A solar array is discussed as a typical example of spacecraft configuration problems. Information on how electric batteries dominate life-cycle costs is presented in chart form. Information is given on liquid metal droplet generators and collectors, hot spot analysis, power dissipation in solar arrays, solar array protection optimization, and electromagnetic compatibility for a power system platform.

Brantley, L. W.↗

Characterization of silicon-gate CMOS/SOS integrated circuits processed with ion implantation

The double layer metallization technology applied on p type silicon gate CMOS/SOS integrated circuits is described. A smooth metal surface was obtained by using the 2% Si-sputtered Al. More than 10% probe yield was achieved on solar cell controller circuit TCS136 (or MSFC-SC101). Reliability tests were performed on 15 arrays at 150 C. Only three arrays failed during the burn in, and 18 arrays out of 22 functioning arrays maintained the leakage current below 100 milli-A. Analysis indicates that this technology will be a viable process if the metal short circuit problem between the two metals can be reduced.

Woo, D. S.↗

Space environmental effects on materials

Research efforts at NASA-Langley to characterize the durability of composite materials which are candidates or use as components on various space hardware systems are reviewed. The material applications include large space structures, antennas, cables, thermal control coatings, solar reflectors, and satellite power systems. Simulation facilities have been built to study radiation effects on polymer matrix composites, and the dimensional stability of the matrix composites and tension stabilized.

Tenny, D. R.↗

Space environmental effects on materials

Research efforts at NASA-Langley to characterize the durability of composite materials which are candidates for use as components on various space hardware systems are reviewed. The material applications include large space structures, antennas, cables, thermal control coatings, solar reflectors, and satellite power systems. Simulation facilities have been built to study radiation effects on polymer matrix composites, and the dimensional stability of the matrix composites and tension stabilized cables. Numerical models are being developed for radiation effects on the mechanical, physical, and optical properties. Additionally, chemical and microstructural analyses are performed to identify damage mechanisms and the limits of effectiveness of accelerating life tests. It is noted that no residual strength reduction has been detected in polymer films after dosages of 5 billion rads of electron radiation.

Tenney, D. R.↗

Observations of Jupiter's distant magnetotail and wake

Results are presented for Voyager 2 plasma wave and plasma measurements, obtained during mid-1980 to August 1981, which indicate the existence of clear signatures of Jovian nonthermal continuum radiation while the spacecraft was in the general downstream direction from Jupiter up to distances of approximately 4.5 AU. A periodicity indicating some solar wind control was indicated by the increasing magnitude and duration of the events as Voyager 2 approached the nominal aberrated tail position in the spring of 1981. It is found that each event shows characteristics suggestive of electromagnetic radiation trapped within a low-density cavity. Several of the events are characterized by a broad, moderately low density region surrounding a well-defined, very low density core. It is concluded that this series of continuum radiation events is best interpreted as the passage of Voyager 2 through the extended magnototail and wake of Jupiter. In addition, the various allowed tail configurations consistent with the observations are examined.

Kurth, W. S.↗

Numerical models for cometary dust environments

The development of a numerical model for the dust environment near a comet is described. The major components of the model are a simple treatment of the acceleration of the dust by the gas outflow from an isothermal icy nucleus, a detailed treatment of the dust particle trajectories controlled by solar gravity and radiation pressure, including the formation of the dust envelope and tail, and a simple treatment of the radiation from the dust in the visible and thermal infrared. The results of recent comet observations are used to estimate parameter values for the model, including dust-to-gas ratios by light and by mass, the distribution of dust and gas emission on the nuclear surface, the distributions of dust particle size, density, mass, and radiative properties, and other quantities. Gas and dust production rates as functions of time are derived from observed light curves using the simple photometric theory. Sample results are presented for the dust concentration, flux and fluence along the trajectory of a spacecraft which flies by Comet P/Halley in 1986.

Divine, N.↗

The physics of the cometary contact surface

The contact surface, which separates outflowing cometary plasma from solar wind controlled cometary plasma, is explained in terms of a balance between the magnetic pressure gradient force and ion-neutral drag. Giotto data indicate that the plasma pressure inside the contact surface cannot balance the sum of the external plasma and magnetic pressures, and therefore a Venus-like ionopause is not present at the contact surface. An expression for the magnetic field strength as a function of cometocentric distance is derived from the momentum equation. The theoretical magnetic field profile agrees quite well with the profile measured by the Giotto magnetometer in the vicinity of the contact surface.

Cravens, Thomas E.↗

Planetary radio waves

Three planets, the earth, Jupiter and Saturn are known to emit nonthermal radio waves which require coherent radiation processes. The characteristic features (frequency spectrum, polarization, occurrence probability, radiation pattern) are discussed. Radiation which is externally controlled by the solar wind is distinguished from internally controlled radiation which only originates from Jupiter. The efficiency of the externally controlled radiation is roughly the same at all three planets (5 x 10 to the -6th) suggesting that similar processes are active there. The maser radiation mechanism for the generation of the radio waves and general requirements for the mechanism which couples the power generator to the region where the radio waves are generated are briefly discussed.

Goertz, C. K.↗

Hydromagnetic waves at low latitudes - A symposium review from the fifth IAGA assembly

The aim of the symposium was to bring together investigators with interests in low latitude hydromagnetic waves in order to review the present state of knowledge in this area of magnetospheric physics. Of particular importance is the means by which wave energy is transferred to low latitudes to produce geomagnetic pulsations on the ground. The group of contributed papers reviewed shows that definitive experiments are underway and new theories capable of providing resonant wave energy at low latitudes are being developed. Particular topics covered by the review include solar wind control, wave spectra, array studies of wave parameters, storm time waves, and global wave resonance theory involving the coupling of compressional and transverse waves in the magnetosphere.

Fraser, B. J.↗

Plasma wave observations at Comets Giacobini-Zinner and Halley

Cometary plasma wave measurements in the spectral range from the lower hybrid resonance frequency to the electron plasma frequency are presented for the Comets Giacobini-Zinner and Halley. The results show the significant role played by plasma physics in controlling the solar wind interaction with a comet. A variety of very strong wave-particle interactions are found to develop in the entire region where strong mass loading occurs, and additional important plasma instabilities are found in the vast region where newly-born ions are picked up by the solar wind. The difficulties involved in making plasma wave measurements in the presence of large fluxes of dust particles impacting the spacecraft at high speed are discussed.

Scarf, Frederick↗

Long Duration Exposure Facility (LDEF) results

Thermal control coatings, solar cells, and micrometeoroid capture cells were flown on the LDEF-Experiment S1002 to investigate the behavior of these components under space conditions and to collect micrometeoroids and debris. The experiment and the components to be investigated are described. The visual inspections, electrical and thermooptical measurements as well as chemical and metallurgical investigations conducted on the complete experiment as well as on single components are described, analyzed and discussed.

Preuss, Ludwig↗

Long Duration Exposure Facility experiment M0003: Deintegration/findings and impacts

The Long Duration Exposure Facility (LDEF) Experiment M0003 consists of 19 subexperiments from laboratories and contractor organizations and was designed to study the effects of the space environment on a large variety of spacecraft materials and components, both current and developmental. The experiment was housed in four LDEF trays and contained over 1250 specimens, two data systems, and two environment exposure control canisters. Nearly identical pairs of trays were located on the leading and trailing edges of LDEF. The materials in these trays span nearly all generic functions in spacecraft such as optics, thermal control, composites, solar power, and electronics. Effects of the space environment, such as vacuum, ultraviolet, atomic oxygen, meteoroids and debris, thermal cycling, and synergistic effects on various samples, will be described. Summaries of the on-board data will be presented.

Meshishnek, M. J.↗