Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Observation and simulation of the radial evolution and stream structure of solar wind turbulence

This paper presents a brief overview of the observed evolution in a variety of quantities describing the turbulent evolution of the interplanetary plasma and describes simulation results consistent with many features of the evolution. The turbulence is manifested through a dissipation at small scales in the inner heliosphere with a corresponding evolution in the breakpoint between a relatively flat and a Kolmogoroff spectrum; an evolution from kinetically to (slightly) magnetically dominated energy of the plasma fluctuations; a general decrease in the cross helicity or 'Alfvenicity'; changes in the anisotropy of the fluctuations; and the increasing predominance of quasi-pressure-balanced structures in the compressive component of the fluctuations. MHD simulations with shear layers either side of a central current sheet show that even in the absence of compressibility the lack of a mean field along the direction of the main flow in the current sheet leads to rapid nonlinear evolution and the observed characteristics of 'Elsasser spectra' of the fields in the inner heliosphere. Adding compressibility to the simulations does not greatly change the 'incompressive' quantities but leads in addition to observed correlations between a measure of compression and other quantities.

Roberts, D. A.↗
NASA NTRS1996

Structural dynamic model obtained from flight use with piloted simulation and handling qualities analysis

The ability to use flight data to determine an aircraft model with structural dynamic effects suitable for piloted simulation. and handling qualities analysis has been developed. This technique was demonstrated using SR-71 flight test data. For the SR-71 aircraft, the most significant structural response is the longitudinal first-bending mode. This mode was modeled as a second-order system, and the other higher order modes were modeled as a time delay. The distribution of the modal response at various fuselage locations was developed using a uniform beam solution, which can be calibrated using flight data. This approach was compared to the mode shape obtained from the ground vibration test, and the general form of the uniform beam solution was found to be a good representation of the mode shape in the areas of interest. To calibrate the solution, pitch-rate and normal-acceleration instrumentation is required for at least two locations. With the resulting structural model incorporated into the simulation, a good representation of the flight characteristics was provided for handling qualities analysis and piloted simulation.

Powers, Bruce G.↗
NASA NTRS1989

Futurepath: The Story of Research and Technology at NASA Lewis Research Center

The story of research and technology at NASA Lewis Research Center's Structures Division is presented. The job and designs of the Structures Division needed for flight propulsion is described including structural mechanics, structural dynamics, fatigue, and fracture. The video briefly explains why properties of metals used in structural mechanics need to be tested. Examples of tests and simulations used in structural dynamics (bodies in motion) are briefly described. Destructive and non-destructive fatigue/fracture analysis is also described. The arc sprayed monotape (a composite material) is explained, as are the programs in which monotape plays a roll. Finally, the National Aero-Space Plane (NASP or x-30) is introduced, including the material development and metal matrix as well as how NASP will reduce costs for NASA.

Source record↗
NASA NTRS1988

Effects of stratospheric lapse rate on thunderstorm cloud-top structure in a three-dimensional numerical simulation. I - Some basic results of comparative experiments

The effects of stratospheric temperature lapse rate on cloud top height/temperature structure for strongly sheared, mature, isolated midlatitude thunderstorms are investigated by performing three different experiments with an anelastic, three-dimensional model: (1) with an assumed stratospheric lapse rate of 0 K/km (i.e., the isothermal case), (2) with 3 K/km, and (3) with -3 K/km (i.e., the case of inversion). Kinematic storm structure is very similar in all three cases, especially in the troposphere; a strong quasi-steady updraft evolves and splits into a dominant cyclonic overshooting right-mover and a weaker, anticyclonic left-mover that does not reach the tropopause.

Schlesinger, Robert E.↗
NASA NTRS1993

Quantitative analysis of voids in percolating structures in two-dimensional N-body simulations

We present in this paper a quantitative method for defining void size in large-scale structure based on percolation threshold density. Beginning with two-dimensional gravitational clustering simulations smoothed to the threshold of nonlinearity, we perform percolation analysis to determine the large scale structure. The resulting objective definition of voids has a natural scaling property, is topologically interesting, and can be applied immediately to redshift surveys.

Harrington, Patrick M.↗
NASA NTRS1985

Numerical simulation of precipitation induced downbursts

Using the Terminal Area Simulation System (TASS), numerical simulations of downburst structure and sensitivity, based on vertical profiles of environmental temperature, humidity and wind velocity observed during the June and August 1982 JAWS project, are presented. Two-dimensional axisymmetric simulations examining downburst evolution, structure and sensitivity, assume a 40-m constant grid size on a 10-km diameter 5-km deep cylindrical domain. The three-dimensional experiment, examining the effects of vertical wind shear and other asymmetrical aspects of the downpour, assumed a 500-m constant horizontal grid size and a 35 x 35 x 18.5-km area. In the downburst primary structure depicted, outflow speeds were found to be sensitive to environmental temperature and humidity, as well as to precipitation radius and intensity. A vortex ring was found to propagate downwards, and maximum outflow winds occur when the vortex ring first reaches the surface.

Proctor, F. H.↗
NASA NTRS1992

Design for progressive fracture in composite shell structures

The load carrying capability and structural behavior of composite shell structures and stiffened curved panels are investigated to provide accurate early design loads. An integrated computer code is utilized for the computational simulation of composite structural degradation under practical loading for realistic design. Damage initiation, growth, accumulation, and propagation to structural fracture are included in the simulation. Progressive fracture investigations providing design insight for several classes of composite shells are presented. Results demonstrate the significance of local defects, interfacial regions, and stress concentrations on the structural durability of composite shells.

Minnetyan, Levon↗
NASA NTRS2007

Development of Probabilistic Structural Analysis Integrated with Manufacturing Processes

An effort has been initiated to integrate manufacturing process simulations with probabilistic structural analyses in order to capture the important impacts of manufacturing uncertainties on component stress levels and life. Two physics-based manufacturing process models (one for powdered metal forging and the other for annular deformation resistance welding) have been linked to the NESSUS structural analysis code. This paper describes the methodology developed to perform this integration including several examples. Although this effort is still underway, particularly for full integration of a probabilistic analysis, the progress to date has been encouraging and a software interface that implements the methodology has been developed. The purpose of this paper is to report this preliminary development.

Pai, Shantaram S.↗
NASA NTRS1986

Computational engine structural analysis

A significant research activity at the NASA Lewis Research Center is the computational simulation of complex multidisciplinary engine structural problems. This simulation is performed using computational engine structural analysis (CESA) which consists of integrated multidisciplinary computer codes in conjunction with computer post-processing for problem-specific application. A variety of the computational simulations of specific cases are described in some detail in this paper. These case studies include: (1) aeroelastic behavior of bladed rotors, (2) high velocity impact of fan blades, (3) blade-loss transient response, (4) rotor/stator/squeeze-film/bearing interaction, (5) blade-fragment/rotor-burst containment, and (6) structural behavior of advanced swept turboprops. These representative case studies are selected to demonstrate the breath of the problems analyzed and the role of the computer including post-processing and graphical display of voluminous output data.

Chamis, C. C.↗
NASA NTRS1986

Computational engine structural analysis

A significant research activity at the NASA Lewis Research Center is the computational simulation of complex multidisciplinary engine structural problems. This simulation is performed using computational engine structural analysis (CESA) which consists of integrated multidisciplinary computer codes in conjunction with computer post-processing for problem-specific application. A variety of the computational simulations of specific cases are described in some detail in this paper. These case studies include: (1) aeroelastic behavior of bladed rotors, (2) high velocity impact of fan blades, (3) blade-loss transient response, (4) rotor/stator/squeeze-film/bearing interaction, (5) blade-fragment/rotor-burst containment, and (6) structural behavior of advanced swept turboprops. These representative case studies are selected to demonstrate the breath of the problems analyzed and the role of the computer including post-processing and graphical display of voluminous output data.

Chamis, C. C.↗
NASA NTRS1995

Microwave and infrared simulations of an intense convective system and comparison with aircraft observations

A three-dimensional cloud model, radiative transfer model-based simulation system is tested and validated against the aircraft-based radiance observations of an intense convective system in southeastern Virginia on 29 June 1986 during the Cooperative Huntsville Meteorological Experiment. NASA's ER-2, a high-altitude research aircraft with a complement of radiometers operating at 11-micrometer infrared channel and 18-, 37-, 92-, and 183-GHz microwave channels provided data for this study. The cloud model successfully simulated the cloud system with regard to aircraft- and radar-observed cloud-top heights and diameters and with regard to radar-observed reflectivity structure. For the simulation time found to correspond best with the aircraft- and radar-observed structure, brightness temperatures T(sub b) are simulated and compared with observations for all the microwave frequencies along with the 11-micrometer infrared channel. Radiance calculations at the various frequencies correspond well with the aircraft observations in the areas of deep convection. The clustering of 37-147-GHz T(sub b) observations and the isolation of the 18-GHz values over the convective cores are well simulated by the model. The radiative transfer model, in general, is able to simulate the observations reasonably well from 18 GHz through 174 GHz within all convective areas of the cloud system. When the aircraft-observed 18- and 37-GHz, and 90- and 174-GHz T(sub b) are plotted against each other, the relationships have a gradual difference in the slope due to the differences in the ice particle size in the convective and more stratiform areas of the cloud. The model is able to capture these differences observed by the aircraft. Brightness temperature-rain rate relationships compare reasonably well with the aircraft observations in terms of the slope of the relationship. The model calculations are also extended to select high-frequency channels at 220, 340, and 400 GHz to simulate the Millimeter-wave Imaging Radiometer aircraft instrument to be flown in the near future. All three of these frequencies are able to discriminate the convective and anvil portions of the system, providing useful information similar to that from the frequencies below 183 GHz but with potentially enhanced spatial resolution from a satellite platform. In thin clouds, the dominant effect of water vapor is seen at 174, 340, and 400 GHz. In thick cloudy areas, the scattering effect is dominant at 90 and 220 GHz, while the overlaying water vapor can attenuate at 174, 340, and 400 GHz. All frequencies (90-400 GHz) show strong signatures in the core.

Prasad, N.↗
NASA NTRS1985

Dynamic Simulation and Stability Analysis

Dynamic Interaction Simulation of Controls and Structure (DISCOS) program developed for dynamic simulation and stability analysis of passive and actively controlled spacecraft. In use of DISCOS, physical system undergoing analysis generally described as cluster of contiguous flexible structures (bodies) that comprise mechanical system, such as spacecraft.

Frisch, H. P.↗
NASA NTRS1995

Efficient finite element simulation of slot spirals, slot radomes and microwave structures

This progress report contains the following two documents: (1) 'Efficient Finite Element Simulation of Slot Antennas using Prismatic Elements' - A hybrid finite element-boundary integral (FE-BI) simulation technique is discussed to treat narrow slot antennas etched on a planar platform. Specifically, the prismatic elements are used to reduce the redundant sampling rates and ease the mesh generation process. Numerical results for an antenna slot and frequency selective surfaces are presented to demonstrate the validity and capability of the technique; and (2) 'Application and Design Guidelines of the PML Absorber for Finite Element Simulations of Microwave Packages' - The recently introduced perfectly matched layer (PML) uniaxial absorber for frequency domain finite element simulations has several advantages. In this paper we present the application of PML for microwave circuit simulations along with design guidelines to obtain a desired level of absorption. Different feeding techniques are also investigated for improved accuracy.

Gong, J.↗
NASA NTRS2011

Enhanced Spectral Anisotropies Near the Proton-Cyclotron Scale: Possible Two-Component Structure in Hall-FLR MHD Turbulence Simulations

Recent analysis of the magnetic correlation function of solar wind fluctuations at 1 AU suggests the existence of two-component structure near the proton-cyclotron scale. Here we use two-and-one-half dimensional and three-dimensional compressible MHD models to look for two-component structure adjacent the proton-cyclotron scale. Our MHD system incorporates both Hall and Finite Larmor Radius (FLR) terms. We find that strong spectral anisotropies appear adjacent the proton-cyclotron scales depending on selections of initial condition and plasma beta. These anisotropies are enhancements on top of related anisotropies that appear in standard MHD turbulence in the presence of a mean magnetic field and are suggestive of one turbulence component along the inertial scales and another component adjacent the dissipative scales. We compute the relative strengths of linear and nonlinear accelerations on the velocity and magnetic fields to gauge the relative influence of terms that drive the system with wave-like (linear) versus turbulent (nonlinear) dynamics.

Ghosh, Sanjoy↗
NASA NTRS2005

Modeling of Triangular Lattice Space Structures with Curved Battens

Techniques for simulating an assembly process of lattice structures with curved battens were developed. The shape of the curved battens, the tension in the diagonals, and the compression in the battens were predicted for the assembled model. To be able to perform the assembly simulation, a cable-pulley element was implemented, and geometrically nonlinear finite element analyses were performed. Three types of finite element models were created from assembled lattice structures for studying the effects of design and modeling variations on the load carrying capability. Discrepancies in the predictions from these models were discussed. The effects of diagonal constraint failure were also studied.

Chen, Tzikang↗
NASA NTRS2019

Evaluating Precipitation Features and Rainfall Characteristics in a Multi-scale Modeling Framework

Cloud and precipitation systems over the tropics and subtropics are simulated with a multi-scale modeling framework (MMF) and compared against the TRMM radar precipitation features (RPFs) product. A methodology, in close analogy to the TRMM RPFs, is developed to analyze simulated cloud precipitating structures from the embedded two-dimensional cloud-resolving models (CRMs) within an MMF. Despite the two-dimensionality of the CRMs, the simulated RPFs population distribution, and horizontal and vertical structure are in good agreement with TRMM observations. However, some deficits are also found in the model simulations. The model tends to overestimate mean convective precipitation rates for RPFs with a size less than 100 km, contributing to the excessive precipitation biases in the warm pool and western Pacific, western and northern India Ocean, and eastern Pacific commonly found in most MMFs. For large features with a size greater than 150 km, both convective and stratiform rain rates are underestimated. The distribution of maximum radar echo top heights as a function of RPF size is well simulated except the model tends to underestimate the occurrence frequency of maximum heights greater than 15 km. The maximum echo top heights for convective cells embedded within large RPFs with a size greater than 150 km are also underestimated. The cyclic lateral boundary with a limited model domain generates artificial occurrences for RPFs with a size close to the model domain size, producing a significant contribution to the total rainfall due to their sizes. This cyclic lateral boundary effect can be easily identified and quantified in both probability and cumulative distribution functions of RPFs. The geophysical distribution of the population of the largest RPFs in the control experiment shows they are mainly located in the Subtropics but also partially contribute to the common MMF biases of excessive precipitation in the Tropics. Sensitivity experiments using CRMs with different domain sizes and different grid spacings show larger domains (higher resolution) tend to shift the RPFs distribution to large (small) sizes. The cyclic lateral boundary biases increase as CRM domain size decreases. The impacts of model horizontal and vertical resolution on simulated convective systems are also investigated.

Chern, Jiun-Dar↗
NASA NTRS1995

Flow simulations about steady-complex and unsteady moving configurations using structured-overlapped and unstructured grids

The limiting factor in simulating flows past realistic configurations of interest has been the discretization of the physical domain on which the governing equations of fluid flow may be solved. In an attempt to circumvent this problem, many Computational Fluid Dynamic (CFD) methodologies that are based on different grid generation and domain decomposition techniques have been developed. However, due to the costs involved and expertise required, very few comparative studies between these methods have been performed. In the present work, the two CFD methodologies which show the most promise for treating complex three-dimensional configurations as well as unsteady moving boundary problems are evaluated. These are namely the structured-overlapped and the unstructured grid schemes. Both methods use a cell centered, finite volume, upwind approach. The structured-overlapped algorithm uses an approximately factored, alternating direction implicit scheme to perform the time integration, whereas, the unstructured algorithm uses an explicit Runge-Kutta method. To examine the accuracy, efficiency, and limitations of each scheme, they are applied to the same steady complex multicomponent configurations and unsteady moving boundary problems. The steady complex cases consist of computing the subsonic flow about a two-dimensional high-lift multielement airfoil and the transonic flow about a three-dimensional wing/pylon/finned store assembly. The unsteady moving boundary problems are a forced pitching oscillation of an airfoil in a transonic freestream and a two-dimensional, subsonic airfoil/store separation sequence. Accuracy was accessed through the comparison of computed and experimentally measured pressure coefficient data on several of the wing/pylon/finned store assembly's components and at numerous angles-of-attack for the pitching airfoil. From this study, it was found that both the structured-overlapped and the unstructured grid schemes yielded flow solutions of comparable accuracy for these simulations. This study also indicated that, overall, the structured-overlapped scheme was slightly more CPU efficient than the unstructured approach.

Newman, James C., III↗