Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Evolution of the electronic structure in Ta 2 NiSe 5 across the structural transition revealed by resonant inelastic x-ray scattering

We utilized high-energy-resolution resonant inelastic X-ray scattering (RIXS) at both the Ta and Ni L 3 -edges to map out element-specific particle-hole excitations in Ta 2 NiSe 5 across the phase transition. Our results reveal a momentum dependent gap-like feature in the low energy spectrum, which agrees well with the band gap in element-specific joint density of states calculations based on ab initio estimates of the electronic structure in both the low temperature monoclinic and the high temperature orthorhombic structure. Below T c , the RIXS energy-momentum map shows a minimal gap at the Brillouin zone center (~0.16 eV), conforming that Ta 2 NiSe 5 possesses a direct band gap in its low temperature ground state. However, inside the gap, no signature of anticipated collective modes with an energy scale comparable to the gap size can be identified. Upon increasing the temperature to above T c , whereas the gap at the zone center closes, the RIXS map at finite momenta still possesses the gross features of the low temperature map, suggesting a substantial mixing between the Ta and Ni orbits in the conduction and valence bands, which does not change substantially across the phase transition. Our experimental observations and comparison to the theoretical calculations lend further support that the phase transition and the corresponding gap opening in Ta 2 NiSe 5 is largely structural by nature with possible minor contribution from the putative exciton condensate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure of the Receptor Binding Domain of EnvP(b)1, an Endogenous Retroviral Envelope Protein Expressed in Human Tissues

EnvP(b)1 is an endogenous retroviral envelope gene found in human and other primate genomes. We report EnvP(b)1 sequences in primate genomes consistent with an integration event between 40 and 71 million years ago. Using a highly specific polyclonal antiserum raised against the putative receptor binding domain (RBD) of human EnvP(b)1, we detected expression in human placenta, ovaries, and thymus. We found that EnvP(b)1 is proteolytically processed, and using cell-cell fusion assays in multiple primate cell lines, we demonstrated that extant EnvP(b)1 proteins from a variety of primate genomes are fusogenic. This work supports the idea that EnvP(b)1 is under purifying selection and its fusogenic activity has been maintained for over 40 million years. We determined the structure of the RBD of human EnvP(b)1, which defines structural similarities with extant leukemia viruses, despite little sequence conservation. This structure highlights a common scaffold from which novel receptor binding specificities likely evolved. The evolutionary plasticity of this domain may underlie the diversity of related Envs in circulating viruses.

59 BASIC BIOLOGICAL SCIENCES↗

Accurate Refinement of the Crystal Structure of Ba{sub 3}TaGa{sub 3}Si{sub 2}O{sub 14} from Langasite Family and Analysis of Structural Transformations Due to Isomorphous Cation Substitutions

An accurate structure analysis of a Ba{sub 3}TaGa{sub 3}Si{sub 2}O{sub 14} single crystal from langasite family was performed using four X-ray diffraction data sets collected on a diffractometer equipped with a CCD area detector (sp. gr. P321, Z = 1, sinθ/λ ≤ 1.35 Å{sup –1}; at 295 K a = 8.516(1) Å, c = 5.1910(6) Å, R/wR = 0.58/0.56%, Δρ{sub min}/Δρ{sub max} =–0.73/0.42 e/Å{sup 3}, 4414 independent reflections; at 106 K a = 8.5109(9) Å, c = 5.1861(9) Å, R/wR = 0.75/0.86%, Δρ{sub min}/Δρ{sub max} =–0.81/1.06 e/Å{sup 3}, 4382 reflections). The distinguishing feature of the Ba{sub 3}TaGa{sub 3}Si{sub 2}O{sub 14} structure is a strong disorder of the Ga atom at the 3f site. Structural transformations in the series of Сa{sub 3}TaGa{sub 3}Si{sub 2}O{sub 14}–Sr{sub 3}TaGa{sub 3}Si{sub 2}O{sub 14}–Ba{sub 3}TaGa{sub 3}Si{sub 2}O{sub 14}–Ba{sub 3}TaFe{sub 3}Si{sub 2}O{sub 14} crystals were analyzed.

36 MATERIALS SCIENCE↗

Structural Analysis of K 4 Fe(CN) 6 ·3H 2 O, K 3 Fe(CN) 6 and Prussian Blue

XRD and XAS were used to characterize the bulk structure, while XPS was used to characterize the surface structure, of commercially obtained nominally K 4 Fe(CN) 6 ·3H 2 O, K 3 Fe(CN) 6 and our synthesized Prussian Blue (PB) material. K 4 Fe(CN) 6 ·3H 2 O was found to consist of a fully hydrated phase, which crystallizes in the monoclinic form and a less hydrated or anhydrous phase which crystallizes in the orthorhombic form. K 3 Fe(CN) 6 was found to consist of the well-established orthorhombic form rather than the monoclinic form. The structure of our synthesized Prussian Blue (PB) was found to be consistent with that reported for (KOH) 0.7 Fe(III) 1.33 Fe(II)(CN) 6 ·4.0H 2 O which crystallizes in the cubic form. XPS and XAS confirmed the presence of ferrous Fe(II) at the surface and bulk levels in K 4 Fe(CN) 6 ·xH 2 O. However, XPS revealed the presence of Fe(II) (~30%) and Fe(III) (~70%) in the surface region of K 3 Fe(CN) 6 while XAS confirmed the presence of mostly Fe(III) at the bulk level. Both XPS and XANES confirmed the presence of Fe(II) and Fe(III) in the surface and bulk regions of PB. We report that this ex situ XAS study will be used to support the analysis of an in situ XAS data collected on a PB containing supercapacitor to understand the mechanistic origin of pseudocapacitance in these devices.

42 ENGINEERING↗

Structural Analysis, Modeling, and Testing of Multi-nut Joint for TriTruss Structure

The Multi-nut joint, developed at NASA Langley Research Center (LaRC), was designed to assemble TriTruss modules for a doubly curved 65.6-feet telescope support structure. Axial and bending tests for a multi-nut joint in the TriTruss structure were conducted to characterize the structural performance of the multi-nut joint and to obtain the installation torque value of the attachment fastener. This paper describes the summary of the axial and bending tests of the multi-nut joint, along with the test results. The equivalent axial stiffness (EA) and equivalent bending stiffness (EI) of the multi-nut joint were characterized based on these test results and are presented in this report. Additionally, finite element models (FEMs) of the axial and bending test specimens were developed, and the predicted axial and bending responses of the multi-nut joint were compared with the test results. Test-analysis comparison results show that the predicted axial load-displacement response of the test specimen was within 5 percent of the test results, while the predicted load-bending response of the test specimen exhibited a consistent trend with the test data.

TriTruss↗

Structural Analysis, Modeling, and Testing of Multi-nut Joint for TriTruss Structure

The Multi-nut joint, developed at NASA Langley Research Center (LaRC), was designed to assemble TriTruss modules for a doubly curved 65.6-feet telescope support structure. Axial and bending tests for a multi-nut joint in the TriTruss structure were conducted to characterize the structural performance of the multi-nut joint and to obtain the installation torque value of the attachment fastener. This paper describes the summary of the axial and bending tests of the multi-nut joint, along with the test results. The equivalent axial stiffness (EA) and equivalent bending stiffness (EI) of the multi-nut joint were characterized based on these test results and are presented in this report. Additionally, finite element models (FEMs) of the axial and bending test specimens were developed, and the predicted axial and bending responses of the multi-nut joint were compared with the test results. Test-analysis comparison results show that the predicted axial load-displacement response of the test specimen was within 5 percent of the test results, while the predicted load-bending response of the test specimen exhibited a consistent trend with the test data.

Structural analysis↗

Structure‐based control of the rate limitation of photosynthetic electron transport

The 2.5 Å structure of the cytochrome (cyt) b 6 f complex provides a basis for control of the rate‐limiting electron transfer step of oxygenic photosynthesis associated with the plastoquinol/quinone exchange pathway. Here, a structural change was made at a site containing two proline residues which border the intra‐cyt pathway for plastoquinol/quinone exchange. The proline side chains confer a larger aperture for passage of plastoquinol/quinone. Change of these prolines to alanine in the cyanobacterium Synechococcus sp. PCC 7002 results in attenuation of this rate‐limiting step, observed by a two‐fold reduction in the rate of cell growth, O 2 evolution, and plastoquinol‐mediated reduction of cyt f . This study demonstrates modification by site‐directed mutagenesis of photosynthetic energy transduction based on rational application of information in the atomic structure.

Ness, Jillian↗

Defect‐Mediated Ordering of Condensed Water Structures in Microporous Zeolites

Abstract Ab‐initio molecular dynamics simulations and transmission infrared spectroscopy are employed to characterize the structure of water networks in defect‐functionalized microporous zeolites. Thermodynamically stable phases of clustered water molecules are localized at some of the defects in zeolite Beta, which include catalytic sites such as framework Lewis acidic Sn atoms in closed and hydrolyzed‐open forms, as well as silanol nests. These water clusters compete with ideal gas‐like structures at low water densities and pore‐filling phases at higher water densities, with the equilibrium phase determined by the water chemical potential. The physical characteristics of these phases are determined by the defect identity, with the local binding and orientation of hydroxyl moieties around the defects playing a central role. The results suggest general principles for how the structure of polar solvents in microporous solid acids is influenced by local defect functionalization, and the thermodynamic stability of the condensed phases surrounding such sites, in turn, implies that the catalysis of Lewis acids will be influenced by local water ordering.

Bukowski, Brandon C.↗