Search NASA⌕ Search

SEARCH · Search NASA

Results for “Support effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Quantification of cerivastatin toxicity supports organismal performance assays as an effective tool during pharmaceutical safety assessment

A major problem in pharmaceutical development is that adverse effects remain undetected during preclinical and clinical trials, but are later revealed after market release when prescribed to many patients. We have developed a fitness assay known as the organismal performance assay (OPA), which evaluates individual performance by utilizing outbred wild mice ( Mus musculus ) that are assigned to an exposed or control group, which compete against each other for resources within semi-natural enclosures. Performance measurements included reproductive success, survival, and male competitive ability. Our aim was to utilize cerivastatin (Baycol ® , Bayer), a pharmaceutical with known adverse effects, as a positive control to assess OPAs as a potential tool for evaluating the safety of compounds during preclinical trials. Mice were exposed to cerivastatin (~4.5 mg/kg/day) into early adulthood. Exposure ceased and animals were released into semi-natural enclosures. Within enclosures, cerivastatin-exposed females had 25% fewer offspring and cerivastatin-exposed males had 10% less body mass, occupied 63% fewer territories, sired 41% fewer offspring, and experienced a threefold increase in mortality when compared to controls. OPAs detected several cerivastatin-nduced adverse effects indicating that fitness assays, commonly used in ecology and evolutionary biology, could be useful as an additional tool in safety testing during pharmaceutical development.

59 BASIC BIOLOGICAL SCIENCES↗

First principles calculations in support of Pu aging: calculating the effects of lattice imperfections on thermodynamics

Plutonium (Pu) has, in theory, well defined crystal structures: its atoms are arranged in regular spatial patterns. But Pu is radioactive, and as its nuclei decay those regular spatial patterns are interrupted. The interruptions are lattice imperfections, which are known to affect how materials respond to their environment. To adequately model Pu, we need to know which lattice imperfections are present, how they interact with each other, and how they affect the material’s response to its environment. The work presented here aims to use density functional theory (DFT) calculations to begin to answer the latter, in particular, how individual lattice imperfections affect measurable effects including thermal expansion (the change in volume in response to a change in temperature), heat capacity (the amount of thermal energy needed to change a material’s temperature), and elastic moduli (a material’s resistance to applied stresses). Pu poses many computational challenges. The $\textit{f}$ electrons require special attention. Of all the elements, Pu has the largest number of electrons that must be included in the calculations. Thermal effects require calculating the phonons (the lattice vibrations), which for systems containing lattice imperfections demand large, complex computational cells - but computational resources limit the size and complexity. With careful restructuring of how the calculations are performed, all these challenges have been met to enable calculations that provide insight into how lattice imperfections affect Pu’s response to its environment. Reported here are the computational challenges and the advances developed to meet them, along with the first results showing the strong effect that one prototype lattice imperfection (an interstitial Pu atom in a delta-phase Pu lattice) has on Pu’s response to its environment.

36 MATERIALS SCIENCE↗

Understanding of Ag Nanocatalysts for Electrocatalytic CO2 Conversion: Effects of Particle Size and Carbon Support

In this talk, we combined ultrahigh vacuum (UHV) surface science techniques, electrochemical measurements, and computational modeling to investigate Ag based electrocatalysts for CO2 reduction reaction (CO2RR). Our goal is to understand the critical characteristics governing the activity and selectivity of Ag electrocatalysts. Ag electrocatalysts were grown on highly oriented pyrolytic graphite (HOPG) in the UHV chamber, characterized with X-ray photoelectron spectroscopy (XPS) and scanning tunneling microscopy (STM), and then tested in a custom-built gastight H-cell. Supported by computational modeling based on density functional theory (DFT) calculations and microkinetic modeling (MKM), our studies revealed a strong size-dependent electrocatalytic CO2-to-CO conversion of the Ag nanoparticle electrocatalysts with average particle diameter between 2 to 6 nm. Smaller diameter (< 3 nm) particles favored H2 evolution reaction (HER) due to a high population of Ag edge sites, whereas larger diameter particles favored CO2RR as the population of Ag(100) surface sites grew. We further discovered that electronic interactions between small diameter Ag particles and highly defective carbon supports could break the size-dependent CO2RR reactivity, resulting in highly selective (CO Faradaic Efficiency > 90%) and active Ag nanoparticle electrocatalysts with sizes < 2 nm diameter. This knowledge is key to understand electrocatalysts performance and to ultimately guide electrocatalyst design

Ag nanoparticles↗

Cost-Effective Thermally Activated Building Systems to Support a Power Grid System With High Penetrations Of As-Available Renewable Energy Resources

With a goal to reduce the energy cost for building operation as well as to support renewable energy sources (RES) for the power grid reliability, quality, resilience, and dispatchability, this project developed and demonstrated a novel thermally activated building envelope system that integrates Phase Change Material (PCM)-based Thermal Energy Storage (TES) and the hydronic activation into the building envelope. The main objectives of this study are: 1) to design and laboraorty-test a novel thermally activated building envelope system that integrate PCM-based TES and the hydronic activation into building envelope, and 2) to exploit this new system to significantly reduce the energy cost of operating buildings and manage and support renewable energy sources (RES), e.g., solar and wind for the power grid reliability, quality, resilience, and dispatchability. To achieve the project objectives, a new low-cost, fire-retardant PCM packaging technology (CenoPCM) was developed specifically for high-volume building applications.

25 ENERGY STORAGE↗

Synthesis of silica supported AuCu nanoparticle catalysts and the effects of pretreatment conditions for the CO oxidation reaction

The reaction of CH{sub 3}CHCl{sub 2} over the nearly-stoichiometric {alpha}-Cr{sub 2}O{sub 3} (10{bar 1} > 2) surface produces an ethylidene intermediate that yields primarily gas phase CH{sub 2} {double_bond} CH{sub 2} and surface chlorine adatoms; however, trace amounts of HC {triple_bond} CH, CH{sub 3}CH{sub 3}, H{sub 2} and CH{sub 3}CH {double_bond} CHCH{sub 3} are also observed. A rate-limiting intramolecular isomerization (2,1-hydrogen shift) in the surface ethylidene species produces gas phase CH{sub 2} {double_bond} CH{sub 2}. The chlorine freed from the dissociation of CH{sub 3}CHCl{sub 2} binds at the five-coordinate surface Cr{sup 3+} sites on the stoichiometric surface, completing the octahedral coordination sphere, and inhibits the surface chemistry by simple site blocking. No surface carbon deposition is observed from the thermal reaction of 1,1-dichloroethane under the conditions of this study, demonstrating that the ethylidene intermediate is not a primary coke forming intermediate over (10{bar 1} > 2) facets of {alpha}-Cr{sub 2}O{sub 3} under the conditions of this study.

01 COAL, LIGNITE, AND PEAT↗

Statistical Methods for Effective Spatial and Temporal Scaling in Support of Probabilistic Performance Assessments - 17340

Performance assessments (PAs) for the disposal of low-level radioactive waste have traditionally been performed in a deterministic manner, with inputs specified as single values as if they carry no uncertainty. Modern PAs, however, explicitly incorporate uncertainty through use of probability distributions for inputs instead of single values. While this is clearly an improvement, challenges remain in specifying appropriate distributions, many of which relate to capturing the appropriate spatial and/or temporal scale given the PA model, and matching the scale(s) of data and information to that specified by the model. More careful attention to scaling will lead to more defensible characterizations of physical variability and uncertainty in model inputs, thus leading to more defensible information regarding outcomes of interest to be used in decision making, and hence more defensible decisions. This work introduces general strategies and considerations for explicitly incorporating considerations of scale into distribution development. The strategies are explained as a series of steps and then presented with an example that starts to illustrate the new statistical concepts. This work frames the problem in terms of hierarchical statistical modeling, providing important connections to current statistical approaches to formally and rigorously account for temporal and spatial scaling. The larger goal is to build a more formal and unified approach to distribution development to help teams of modelers, subject matter experts, and statisticians work together to develop distributions and justify the choices made in the process, ultimately leading to more informed decision-making. Without this rigor, statistical distributions are not specified correctly and can have unexpected consequences for modeling and sensitivity analysis. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

SU-F-T-75: Dosimetry Considerations in the Use of Hanging-Eye Block for Lesions of the Conjunctiva

Purpose: Superficial lesions in the conjunctiva are frequently treated with en face electrons, using a hanging block to spare dose to the lens of the eye. Dose to the tumor and lens depend on the design and setup of the block and supporting apparatus. We performed in phantom measurements in order to characterize the dose sparing effects of the block as well as the under-dosing effect under the supporting apparatus for 6 MeV treatment. Methods: The commercial hanging block studied uses a 1.2 cm diameter tungsten cylinder supported by a 3 mm diameter acrylic rod. Point dose measurements under the hanging block, under an unblocked part of the field, and under the acrylic rod were performed using MOSFET detectors. In addition, EBT3 film was used for both PDD and profile measurements at a depth in phantom of 3 mm for both 105 and 103 cm SSD. Results: MOSFET measurements reported a dose reduction of 95% under the tungsten block when using an SSD of 103 cm, and 86% when using an SSD of 105 cm at a depth in phantom of 3 mm. Film measurements showed that the area under the acrylic rod may be under-dosed by as much as 30% when using 103 SSD. MOSFET measurements confirmed that when using an SSD of 103 cm, the area under the acrylic rod is under-dosed by up to 30% at 3mm depth, compared to the unblocked part of the field. Conclusion: The effectiveness of the commercial hanging block apparatus depends on setup, with 95% lens sparing possible with an SSD of 103 cm. This short SSD is necessary for sharp penumbra. At this SSD, substantial under-dosing under the acrylic support rod is possible. This must be mitigated with either feathering, or using an alternative method of support for the tungsten block.

60 APPLIED LIFE SCIENCES↗

Annealing effects on microstrain of cobalt oxide nanoparticles

Cobalt oxide nanoparticles in different phases have been synthesized using ash supported method. The effect of isochronal annealing on micro-strain of cobalt oxide nanoparticles has been studied. The lattice strain contribution to the x-ray diffraction line broadening in the nanoparticles was analyzed using Williamson Hall (W-H) plot. It is observed that micro-strain was released at higher annealing temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The complex behavior of the Pd 7 cluster supported on TiO 2 (110) during CO oxidation: adsorbate-driven promoting effect

When using the TiO 2 (110)-supported Pd7 cluster as a model catalyst, we identified the dynamics of supported metal nanoparticles using density functional theory calculations, at the sub-nanometer scale and under reactive environments. Increasing the CO coverage can induce a structural transformation from Pd 7 -3D/TiO 2 (110) at low coverage to Pd 7 -2D/TiO 2 (110) at the saturation coverage wherein CO saturation-driven Pd7-2D/TiO 2 (110) structure displays superior CO oxidation activity at the interfacial sites, which are highly active for catalyzing O 2 dissociation and CO oxidation via bifunctional synergy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pt-Co Bimetallic Catalyst Supported on Single-Walled Carbon Nanotubes: Effect of Alloy Formation and Oxygen Containing Groups

Pt monometallic and Pt-Co bimetallic catalysts have been prepared on single-walled carbon nanotubes (SWNT) with and without HNO{sub 3} treatment. The HNO{sub 3} treatment introduced oxygen containing groups (OCGs), which affect both the structure and activity of the catalyst. The introduction of OCGs does not affect the structure of Pt monometallic catalysts but increased the dispersion in the bimetallic catalysts. The aqueous phase re-forming (APR) activity of the bimetallic catalysts is also affected by the OCGs, because the local concentration of the reactant around the SWNT support with OCGs is less than the case without OCGs. The two effects act on activity in opposing directions so the bimetallic catalysts on the two supports give similar APR yields, but this discovery gives us direction and a basis for the future design and improvement of SWNT supported catalysts.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Tuning the Performance of Single-Atom Electrocatalysts: Support-Induced Structural Reconstruction

We present that creating active and stable electrocatalysts remains a highly desirable and critical goal in the fields of catalysis and clean energy conversion. Single-atom catalyst (SAC), as a new research frontier in heterogeneous catalysis, has demonstrated emerging prospects for many electrocatalytic reactions. Support assisted pyrolysis approaches are widely used in the synthesis of single-atom electrocatalysts. While extensive efforts have been devoted to increase the loading of the atomically dispersed metal sites, the role of the support in creating these active metal sites remains largely unexplored. Herein, we compare catalysts created by support-free and support-assisted pyrolysis of vitamin B12 and cobalt tetramethoxyphenylporphyrin, respectively, and demonstrate an important effect of support-induced structural reconstruction that directly controls the activation of SAC. Electrochemical studies show support-free catalysts are inactive for oxygen reduction reaction whereas the support-assisted pyrolysis yields highly active catalysts using the same molecular precursors. X-ray absorption spectroscopy experiments reveal that both the metal-nitrogen coordination and the type of nitrogen species are different in these two types of samples, which leads to a difference in the d-band of the cobalt metal center and ultimately controls the catalytic activity and stability. In conclusion, this new insight provides a unique perspective on how to tune the electrocatalytic performances of SAC at the molecular level.

30 DIRECT ENERGY CONVERSION↗

Linking Silica Support Morphology to the Dynamics of Aminopolymers in Composites

A combined computational and experimental approach is used to elucidate the effect of silica support morphology on polymer dynamics and CO 2 adsorption capacities in aminopolymer/silica composites. Furthermore, simulations are based on coarse-grained molecular dynamics simulations of aminopolymer composites where a branched aminopolymer, representing poly(ethylenimine) (PEI), is impregnated into different silica mesoporous supports. The morphology of the mesoporous supports varies from hexagonally packed cylindrical pores representing SBA-15, double gyroids representing KIT-6 and MCM-48, and cagelike structures representing SBA-16. In parallel, composites of PEI and the silica supports SBA-15, KIT-6, MCM-48, and SBA-16 are synthesized and characterized, including measuring their CO 2 uptake. Simulations predict that a 3D pore morphology, such as those of KIT-6, MCM-48, and SBA-16, will have faster segmental mobility and have lower probability of primary amine and surface silanol associations, which should translate to higher CO 2 uptake in comparison to a 2D pore morphology such as that of SBA-15. We found that KIT-6 has higher CO 2 uptake than SBA-15 at equivalent PEI loading, even though both supports have similar surface area and pore volume. But, this is not the case for the MCM-48 support, which has smaller pores, and SBA-16, whose pore structure rapidly degrades after PEI impregnation.

36 MATERIALS SCIENCE↗

Gold-supported cerium-doped NiO x catalysts for water oxidation

Here, the development of high-performance catalysts for the oxygen-evolution reaction (OER) is paramount for cost-effective conversion of renewable electricity to fuels and chemicals. Here we report the significant enhancement of the OER activity of electrodeposited NiO x films resulting from the combined effects of using cerium as a dopant and gold as a metal support. This NiCeO x –Au catalyst delivers high OER activity in alkaline media, and is among the most active OER electrocatalysts yet reported. On the basis of experimental observations and theoretical modelling, we ascribe the activity to a combination of electronic, geometric and support effects, where highly active under-coordinated sites at the oxide support interface are modified by the local chemical binding environment and by doping the host Ni oxide with Ce. The NiCeO x –Au catalyst is further demonstrated in a device context by pairing it with a nickel–molybdenum hydrogen evolution catalyst in a water electrolyser, which delivers 50 mA consistently at 1.5 V over 24 h of continuous operation.

36 MATERIALS SCIENCE↗

Oxide‐Supported IrNiO x Core–Shell Particles as Efficient, Cost‐Effective, and Stable Catalysts for Electrochemical Water Splitting

Abstract Active and highly stable oxide‐supported IrNiO x core–shell catalysts for electrochemical water splitting are presented. IrNi x @IrO x nanoparticles supported on high‐surface‐area mesoporous antimony‐doped tin oxide (IrNiO x /Meso‐ATO) were synthesized from bimetallic IrNi x precursor alloys (PA‐IrNi x /Meso‐ATO) using electrochemical Ni leaching and concomitant Ir oxidation. Special emphasis was placed on Ni/NiO surface segregation under thermal treatment of the PA‐IrNi x /Meso‐ATO as well as on the surface chemical state of the particle/oxide support interface. Combining a wide array of characterization methods, we uncovered the detrimental effect of segregated NiO phases on the water splitting activity of core–shell particles. The core–shell IrNiO x /Meso‐ATO catalyst displayed high water‐splitting activity and unprecedented stability in acidic electrolyte providing substantial progress in the development of PEM electrolyzer anode catalysts with drastically reduced Ir loading and significantly enhanced durability.

Nong, Hong Nhan↗

Oxide‐Supported IrNiO x Core–Shell Particles as Efficient, Cost‐Effective, and Stable Catalysts for Electrochemical Water Splitting

Abstract Active and highly stable oxide‐supported IrNiO x core–shell catalysts for electrochemical water splitting are presented. IrNi x @IrO x nanoparticles supported on high‐surface‐area mesoporous antimony‐doped tin oxide (IrNiO x /Meso‐ATO) were synthesized from bimetallic IrNi x precursor alloys (PA‐IrNi x /Meso‐ATO) using electrochemical Ni leaching and concomitant Ir oxidation. Special emphasis was placed on Ni/NiO surface segregation under thermal treatment of the PA‐IrNi x /Meso‐ATO as well as on the surface chemical state of the particle/oxide support interface. Combining a wide array of characterization methods, we uncovered the detrimental effect of segregated NiO phases on the water splitting activity of core–shell particles. The core–shell IrNiO x /Meso‐ATO catalyst displayed high water‐splitting activity and unprecedented stability in acidic electrolyte providing substantial progress in the development of PEM electrolyzer anode catalysts with drastically reduced Ir loading and significantly enhanced durability.

Nong, Hong Nhan↗

EFFECT OF RADIUS OF LOADING NOSE AND SUPPORTS IN SHORT BEAM TEST FIXTURE ON FRACTURE MODE AND INTERLAMINAR SHEAR STRENGTH OF GFRP AT 77 K

A short beam test is useful to evaluate interlaminar shear strength of glass fiber reinforced plastics, especially for material selection. However, effect of test fixture configuration on interlaminar shear strength has not been clarified. This paper describes dependence of fracture mode and interlaminar shear strength on the fixture radius using the same materials and procedure. In addition, global understanding of the role of the fixture is discussed. When small loading nose and supports are used for the tests, bending fracture or translaminar fracture happens and the interlaminar shear strength would become smaller. By adopting the large radius loading nose and supports (6 mm radius is recommended), it is newly recognized that some stress concentration is able to be reduced, and the interlaminar fracture tends to occur and the other fracture modes will be suppressed. The interlaminar shear strength of 2.5 mm thick GFRP plate of G-10CR is evaluated as 130-150 MPa at 77 K.

36 MATERIALS SCIENCE↗