Search NASA⌕ Search

SEARCH · Search NASA

Results for “TOPOGRAPHY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Some effects of topography, soil moisture, and sea-surface temperature on continental precipitation as computed with the GISS coarse mesh climate model

The effects of terrain elevation, soil moisture, and zonal variations in sea/surface temperature on the mean daily precipitation rates over Australia, Africa, and South America in January were evaluated. It is suggested that evaporation of soil moisture may either increase or decrease the model generated precipitation, depending on the surface albedo. It was found that a flat, dry continent model best simulates the January rainfall over Australia and South America, while over Africa the simulation is improved by the inclusion of surface physics, specifically soil moisture and albedo variations.

Spar, J.↗

Seasat altimeter observations of dynamic topography in the Gulf Stream region

A straightforward approach to altimeter data analysis in the Gulf Stream system is presented, using a detailed geoid model to remove the gravitational component. The resulting sea surface height profiles compare remarkably well with independent oceanographic observations. Specific features such as cold rings, warm rings, and no anomaly regions are analyzed and it is shown that known positions of cyclonic and anticyclonic rings correspond with depressions and elevations, respectively, with amplitudes as large as 95 cm. The apparent fluctuation of the Gulf Stream is indicated by the results, as in the finding that on time scales of a few days, surface transport indicated by the sea surface height difference across the stream varied by nearly 30%

Cheney, R. E.↗

Topography of Martian central volcanoes

Results are presented of the topographic mapping of six large central volcanoes on Mars. Stereo images of the volcanoes Olympus Mons, Elysium Mons, Albor Tholus, Ceraunius Tholus, Uranius Tholus and Uranius Patera were acquired by Viking Orbiter 1, and pairs of images were compiled into topographic maps through the use of digital image measurement techniques. Olympus Mons is found to have the general form of a terrestrial basaltic shield constructed almost entirely from lava flows, however with an altitude of 20-23 km and flank slopes averaging about 4 deg; a high nominal density indicates that anomalously dense lithosphere underlies the shield. Uranius Patera is observed to be a similar feature of present relief about 2 km, with its lower flanks buried by later lava flood deposits. Elysium Mons has about 13 km of local relief with average slopes of 4.4 deg, although its upper flank slopes are significantly steeper than those of Olympus Mons, suggesting a shield volcano modified by a terminal phase of mixed volcanic activity. Albor Tholus is found to be a partially buried 3-km shield-like construct, while Ceranius and Uranius Tholus are steeper cone-like features with reliefs of about 6 and 2 km, respectively, which may be lava shield constructs modified by a terminal stage of explosive activity.

Blasius, K. B.↗

The topography of Ganymede's grooved terrain

Using the technique of photoclinometry, topographic profiles across areas of grooved terrain and several other features on Ganymede have been constructed. The grooved terrain examined consists of subparallel grooves spaced 3-10 km apart. Topographic amplitudes are typically 300-400 m, with a maximum of about 700 m. Slopes are very gentle and tend to be primarily concave upward. Very few major positive relief features exist on Ganymede. The most important of these is a broad, gently sloping dome-shaped feature 260 km in diameter and over 2 km high.

Squyres, S. W.↗

Image processing applied to gravity and topography data covering the continental United States

The applicability of fairly standard image processing techniques to processing and analyzing large geologic data sets in addressed. Image filtering techniques were used to interpolate between gravity station locations to produce a regularly spaced data array that preserves detail in areas with good coverage, and that produces a continuous tone image rather than a contour map. Standard image processing techniques were used to digitally register and overlay topographic and gravity data, and the data were displayed in ways that emphasize subtle but pervasive structural features. The potential of the methods is illustrated through a discussion of linear structures that appear in the processed data between the midcontinent gravity high and the Appalachians.

Arvidson, R. E.↗

Structure of the midcontinent basement. Topography, gravity, seismic, and remote sensing

Some 600,000 discrete Bouguer gravity estimates of the continental United States were spatially filtered to produce a continuous tone image. The filtered data were also digitally painted in color coded form onto a shaded relief map. The resultant image is a colored shaded relief map where the hue and saturation of a given image element is controlled by the value of the Bouguer anomaly. Major structural features (e.g., midcontinent gravity high) are readily discernible in these data, as are a number of subtle and previously unrecognized features. A linear gravity low that is approximately 120 to 150 km wide extends from southeastern Nebraska, at a break in the midcontinent gravity high, through the Ozark Plateau, and across the Mississippi embayment. The low is also aligned with the Lewis and Clark lineament (Montana to Washington), forming a linear feature of approximately 2800 km in length. In southeastern Missouri the gravity low has an amplitude of 30 milligals, a value that is too high to be explained by simple valley fill by sedimentary rocks.

Guinness, E. A.↗

Lunar floor-fractured craters - Evidence for viscous relaxation of crater topography

Viscous relaxation is evaluated quantitatively as a possible mechanism to account for the observed topographical modification of floor-fractured lunar craters. On the basis of a model of the moon as a viscous material of uniform Newtonian viscosity, the ultimate topographic profiles of fresh craters predicted taking into account viscous relaxation effects are compared with the observed profiles of floor-fractured craters of similar diameter. It is found that for a number of crater pairs, the agreement of the observations with the predictions of the simple viscous relaxation model is good, suggesting that isostatic adjustment of craters in areas of anomalously high temperatures at shallow depth may be a more important source of deformation than previously realized.

Hall, J. L.↗

Topography and stratigraphy of Martian polar layered deposits

The first samples of high resolution Viking Orbiter topographic and stratigraphic data for the layered polar deposits of Mars are presented, showing that these deposits are with respect to both slopes and angular relief similar to those in the south. It is also demonstrated that, in conjunction with stereophotogrammetry, photoclinometry holds promise as a tool for detailed layered deposit studies. The spring season photography, which lends itself to photoclinometric analysis, covers the entire area of the north polar deposits. Detailed tests of layered terrain evolution hypotheses will be made, upon refinement of the data by comparison with stereo data. A more promising refining technique will make use of averaging perpendicular to selected sections to enhance SNR. Local reliefs of 200-800 m, and slopes of 1-8 deg, lead to initial calculations of average layer thickness which yields results of 14-46 m, linearly correlated with slope.

Blasius, K. R.↗

The study of X-ray scattering to determine surface topography of smooth surfaces

The scattering of X-rays from state-of-the-art polished mirrors is discussed with reference to the requirements of the Advanced X-ray Astrophysics Facility telescope. An experimental set-up is described which allows information to be obtained with subarcsecond resolution. A sample of the data obtained is presented along with a possible theoretical model for its interpretation.

Williams, A. C.↗

Satellite laser altimeter for measurement of ice sheet topography

Results of a preliminary conceptual design study are presented for a laser altimeter that is capable of high-resolution mapping of the polar ice sheets and is proposed for inclusion in the National Oceanic Satellite System spacecraft or other polar-orbiting satellites. The instrument consists of a pulsed-laser transmitter operating at a wavelength of 532 nm and a duration of 5 nsec, a receiver telescope, a photomultiplier-tube detector, data processing and control electronics, and an attitude sensing and measurement system; a laser footprint diameter of 70 m is planned. The altimeter components are described, and the accuracy of both the altimetry measurement and the attitude measurement is evaluated. A range precision of about 10 cm is estimated, along with an attitude measurement accuracy of approximately 10 arcsec.

Bufton, J. L.↗

Interaction of the antarctic circumpolar current with bottom topography - An investigation using satellite altimetry

Theoretical studies on the interaction of a zonal current with a zonal ridge, an isolated bump, and a meridional ridge compare favorably with hydrographic observations within the eastward flowing Antarctic Circumpolar Current where it flows over similar topographic features. However, the existing hydrographic data are insufficient for examining the temporal stability and kinematic behavior of the resulting mesoscale structures. In this study, some of these transient features have been compared with patterns in sea surface variability, derived from collinear satellite altimetric data. When these features occurred near the crossing point of two satellite ground traces, it was possible to characterize their length scales, dynamic height relief, and translational and surface geostrophic velocities.

Colton, M. T.↗

Topography, surface properties, and tectonic evolution

Differences in atmospheric composition, atmospheric and lithospheric temperature, and perhaps mantle composition, suggest that the rock cycle on Venus is not similar to the earth's. While radar data are not consistent with a thick, widespread and porous regolith like that of the moon, wind-transported regolith could be cemented into sedimentary rock that would be indistinguishable from other rocks in radar returns. The elevation spectrum of Venus is strongly unimodal, in contrast to the earth. Most topographic features of Venus remain enigmatic. Two types of tectonic model are proposed: a lithosphere too thick or buoyant to participate in convective flow, and a lithosphere which, in participating in convective flow, implies the existence of plate tectonics. Features consistent with earth-like plate tectonics have not been recognized.

Mcgill, G. E.↗

Topography on Ganymede derived from photoclinometry

A fundamental limitation in the quantitative analysis of planetary geomorphology and structural geology results from the absense of topographic data. Among the studies that might be addressed, were such data available, are volumetric and slope relationships of Ionian volcanics, fracture and annealing processes in icy crusts on Europa and Ganymede, and evaluation of viscous relaxation as a means of degrading landforms on Europea, Ganymede, and Callisto. A technique for acquiring topographic data on the Galilean satellites using photoclinometry was developed and applied.

Danielson, G. E.↗

The Influence of Surface Topography on Polymer Friction

Current friction models for polymers are examined to determine their applicability in predicting the effects of roughness on friction. The two component, adhesion deformation model of friction predicts the variation of friction with the change in the sliding direction with respect to the lay direction on anisotropic rough surfaces. The two component model does not predict the change in friction with changes in roughness. A combination of an energy based model and a slip line deformation model may provide a friction model which could better represent measured friction.

Eiss, N. S., Jr.↗

Remote sensing of floe size distribution and surface topography

Floe size can be measured by several properties p- for instance, area or mean caliper diameter. Two definitions of floe size distribution seem particularly useful. F(p), the fraction of area covered by floes no smaller than p; and N(p), the number of floes per unit area no smaller than p. Several summertime distributions measured are a graph, their slopes range from -1.7 to -2.5. The variance of an estimate is also calculated.

Rothrock, D. A.↗

Gravity, topography, and crustal evolution of Venus

A method for estimating radial gravity anomalies from line-of-sight acceleration data, their interpolation, and the use of iteration for improved radial anomaly estimates is outlined. Results based on spherical harmonic coefficients for Venus' gravitational field are first discussed, and the procedure is then presented for determining radial acceleration estimates from the line-of-sight vectors and for interpolating the results at preselected locations using the method of objective mapping. A preliminary gravity anomaly map of much of the surface of Venus based on the first estimation step of this technique is presented, and the results are discussed.

Bowin, C.↗

Topography of the shield volcano, Olympus Mons on Mars

Olympus Mons, one of the largest known shield volcanoes in the solar system, covers an area of more than 3.2 x 10 to the 5th sq km and has a diameter of more than 600 km, excluding its vast aureole deposits. The structure is five times larger than the largest shield volcano on the earth. It is situated on the north-west flank of the Tharsis volcanic region, a broad topographic rise on the Martian surface. The volcano has three physical subdivisions: the summit caldera, the terraced upper flanks, and the lower flanks, which terminate in a scarp 2-10 km high that nearly surrounds the structure. A large block of images of the Tharsis region, including Olympus Mons, was obtained by the Viking mission. A topographic map of Olympus Mons is presented here, which has been compiled using various combinations of stereo pairs of these images, together with stereoscopic perspective views generated by image processing techniques.

Wu, S. S. C.↗