Search NASA⌕ Search

SEARCH · Search NASA

Results for “VAPOR PHASE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Ultrathin Barrier InAlN/GaN Heterostructures for HEMTs

InAlN/AlN/GaN semiconductor heterostructures with a barrier thickness of 5–13 nm have been grown by metalorganic vapor phase epitaxy (MOVPE) on sapphire and SiC substrates. Optimization of GaN buffer and InAlN layers allows fabricating structures with sheet conductivity values below 210 Ohm/sq. High electron mobility transistors (HEMTs) fabricated from such structures show drain current value exceeding 1.25 A/mm with maximum transconductance of 450 mS/mm. Use of thin in situ Si{sub 3}N{sub 4} capping allows to fabricate and compare HEMT and MIS-HEMTs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Role of stable and metastable Mg-H complexes in p-type GaN for cw blue laser diodes

Secondary ion mass spectroscopy (SIMS) and capacitance-voltage measurements were combined to thoroughly study Mg doping in GaN layers grown by metal organic vapor phase epitaxy. First we found that the Mg steady-state incorporation regime occurs for a surface coverage of 0.3 monolayer. Additionally SIMS indicates that H incorporates proportionally with Mg until a certain [Mg] where [H] saturates. After thermal activation, [H] while being much lower still scales with [Mg]. These results suggest that H combines with Mg to form two different types of Mg-H complexes: a metastable one leading to the Mg acceptor after annealing, the other one (dominating at high [Mg]) being stable and electrically inactive. The obtained results allowed us optimizing doping conditions for blue laser diodes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical method of atomic ordering estimation

It is well known that within metal-organic vapor-phase epitaxy (MOVPE) grown semiconductor III-V ternary alloys atomically ordered regions are spontaneously formed during the epitaxial growth. This ordering leads to bandgap reduction and to valence bands splitting, and therefore to anisotropy of the photoluminescence (PL) emission polarization. The same phenomenon occurs within quaternary semiconductor alloys. While the ordering in ternary alloys is widely studied, for quaternaries there have been only a few detailed experimental studies of it, probably because of the absence of appropriate methods of its detection. Here we propose an optical method to reveal atomic ordering within quaternary alloys by measuring the PL emission polarization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Real-Time Nitrate Ion Monitoring with Poly(3,4-ethylenedioxythiophene) (PEDOT) Materials

Nitrate (NO 3 ) pollution in groundwater, caused by various factors both natural and synthetic, contributes to the decline of human health and well-being. Current techniques used for nitrate detection include spectroscopic, electrochemical, chromatography, and capillary electrophoresis. It is highly desired to develop a simple cost-effective alternative to these complex methods for nitrate detection. Therefore, a real-time poly (3,4-ethylenedioxythiophene) (PEDOT)-based sensor for nitrate ion detection via electrical property change is introduced in this study. Vapor phase polymerization (VPP) is used to create a polymer thin film. Variations in specific parameters during the process are tested and compared to develop new insights into PEDOT sensitivity towards nitrate ions. Through this study, the optimal fabrication parameters that produce a sensor with the highest sensitivity toward nitrate ions are determined. With the optimized parameters, the electrical resistance response of the sensor to 1000 ppm nitrate solution is 41.79%. Furthermore, the sensors can detect nitrate ranging from 1 ppm to 1000 ppm. The proposed sensor demonstrates excellent potential to detect the overabundance of nitrate ions in aqueous solutions in real time.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Materials for light-induced water splitting: In situ controlled surface preparation of GaPN epilayers grown lattice-matched on Si(100)

Energy storage is a key challenge in solar-driven renewable energy conversion. We promote a photochemical diode based on dilute nitride GaPN grown lattice-matched on Si(100), which could reach both high photovoltaic efficiencies and evolve hydrogen directly without external bias. Homoepitaxial GaP(100) surface preparation was shown to have a significant impact on the semiconductor-water interface formation. Here, we grow a thin, pseudomorphic GaP nucleation buffer on almost single-domain Si(100) prior to GaPN growth and compare the GaP{sub 0.98}N{sub 0.02}/Si(100) surface preparation to established P- and Ga-rich surfaces of GaP/Si(100). We apply reflection anisotropy spectroscopy to study the surface preparation of GaP{sub 0.98}N{sub 0.02} in situ in vapor phase epitaxy ambient and benchmark the signals to low energy electron diffraction, photoelectron spectroscopy, and x-ray diffraction. While the preparation of the Ga-rich surface is hardly influenced by the presence of the nitrogen precursor 1,1-dimethylhydrazine (UDMH), we find that stabilization with UDMH after growth hinders well-defined formation of the V-rich GaP{sub 0.98}N{sub 0.02}/Si(100) surface. Additional features in the reflection anisotropy spectra are suggested to be related to nitrogen incorporation in the GaP bulk.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of multicomponent InAsSbP matrix surface on formation of InSb quantum dots at MOVPE growth

Indium-antimonide quantum dots (7–9 × 10{sup 9} cm{sup 2}) are produced on an InAs(001) substrate by metal-organic vapor-phase epitaxy at a temperature of T = 440°C. Epitaxial deposition occurred simultaneously onto an InAs binary matrix and an InAsSbP quaternary alloy matrix layer lattice-matched to the InAs substrate in terms of the lattice parameter. Transformation of the quantum-dot shape and size is studied in relation to the chemical composition of the working matrix surface, onto which the quantum dots are deposited. The use of a multicomponent layer makes it possible to control the lattice parameter of the matrix and the strains produced in the system during the formation of self-assembled quantum dots.

36 MATERIALS SCIENCE↗

Thermal stability and in situ SiN passivation of InAlN/GaN high electron mobility heterostructures

We investigate the thermal stability of nearly lattice-matched InAlN layers under metal organic vapor phase epitaxy conditions for temperatures >800 °C and show that they are not fully stable. In particular, InAlN top layers undergo degradation during high temperature annealing due to a surface related process, which causes the loss of crystal quality. This strongly impacts the transport properties of InAlN/GaN HEMT heterostructures; in particular, the mobility is significantly reduced. However, we demonstrate that high thermal stability can be achieved by capping with a GaN layer as thin as 0.5 nm. Those findings enabled us to realize in situ passivated HEMT heterostructures with state of the art transport properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Simulation of the ohmic loss in photovoltaic laser-power converters for wavelengths of 809 and 1064 nm

The method of mathematical simulation is used to examine the influence exerted by the characteristics of the epitaxial structure and contact grid of photovoltaic laser-power converters on their ohmic loss. The maximum attainable photoconverter efficiency at a Gaussian distribution of the laser-beam intensity on the surface of a photovoltaic converter and at dark-current densities of p–n junctions typical of structures grown by the metal-organic vapor-phase epitaxy (MOVPE) technique are determined. An approach to finding the optimal parameters of GaAs and In{sub 0.24}Ga{sub 0.76}As/GaAs photovoltaic converters in relation to the optical power being converted is suggested, and the structural parameters for incident-power values of 5, 20, and 50 W at wavelengths of 809 and 1064 nm are determined. It is found that, at laser-light intensities of up to 5 W, >60% efficiency can be achieved in laser-light conversion at a wavelength of 809 nm and >55% efficiency, at a wavelength of 1064 nm.

36 MATERIALS SCIENCE↗

Radiation hardness of n-GaN schottky diodes

Schottky-barrier diodes with a diameter of ∼10 µm are fabricated on n-GaN epitaxial films grown by hydride vapor-phase epitaxy (HVPE) on sapphire substrates. The changes in the parameters of the diodes under irradiation with 15 MeV protons are studied. The carrier removal rate was found to be 130–145 cm{sup –1}. The linear nature of the dependence N = f(D) (N is the carrier concentration, and D, the irradiation dose) shows that compensation of the material is associated with transitions of electrons from shallow donors to deep acceptor levels which are related to primary radiation defects.

36 MATERIALS SCIENCE↗

Studying the Pyroelectric Effect in AlN Epilayers

We have studied the pyroelectric effect in 6- to 12-μm-thick AlN epilayers grown by hydride–chloride vapor phase epitaxy (HVPE) on 4H-SiC substrates. The pyroelectric current was generated by means of dynamic laser action. Evolution of the temperature fields was monitored by direct measurements of the surface temperature with allowance for the specific thermal heterogeneity of the AlN/SiC system. In combination with the results of pyroelectric current measurements, these data allowed the pyrocoefficient of the AlN/SiC structure to be estimated at p ≈ 3.0 μC/(m{sup 2} K). Pyroelectric figures of merit of the given structure are calculated that can be used for the comparison of pyroelectric materials intended for the creation of IR radiation detectors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Markedly distinct growth characteristics of semipolar (112{sup ¯}2) and (1{sup ¯}1{sup ¯}22{sup ¯}) InGaN epitaxial layers

We compare metalorganic vapor phase epitaxy of InGaN/GaN heterostructures on semipolar (112{sup ¯}2) and (1{sup ¯}1{sup ¯}22{sup ¯}) GaN bulk substrates. In incorporation efficiency is higher for (112{sup ¯}2) InGaN, which enables higher temperature growth of InGaN and is beneficial for quality improvement. InGaN/GaN quantum wells (QWs) on (112{sup ¯}2) show abrupt interfaces, but those on (1{sup ¯}1{sup ¯}22{sup ¯}) tend to form three-dimensional nanofacets. Differences in growth temperature and structures of the (112{sup ¯}2) and (1{sup ¯}1{sup ¯}22{sup ¯}) QWs cause higher internal quantum efficiencies of the (112{sup ¯}2) [(1{sup ¯}1{sup ¯}22{sup ¯})] QWs at shorter (longer) wavelengths.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Low Threshold Lasing in InP/GaInP Quantum Dot Microdisks

We report a realization of room temperature lasing threshold of 1 μW in GaInP microdisk containing a few self-aggregated InP/GaInP quantum dots (QDs) grown by metal-organic vapor phase epitaxy. InP/GaInP QD microdisk cavities emitting in the spectral range of 700–800 nm and having the size of ~2 μm, free spectral range of ~35 nm and quality factors Q ~ 4000 were formed by wet chemical etching. Low dot density (~2 μm{sup –2}) and large dot size (~150 nm), suggesting a single dot lasing and maximum overlap of QD and cavity mode, were achieved using deposition of 3 ML of InP layer at 700°C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Rearrangement of Electroluminescence Spectra in Type-II n-InAs/n-InAsSbP Heterostructures

Single heterostructures of type II n{sup +}-InAs/n{sup 0}-InAs{sub 0.59}Sb{sub 0.16}P{sub 0.25}, based on an intentionally undoped epitaxial layer with an electronic type of conductivity are obtained by metalorganic vapor phase epitaxy (MOVPE). In the heterostructure, a transition layer of modulated composition is formed near the heterointerface in the bulk of the quaternary solid solution. The existence of a radiative recombination channel due to the presence of localized hole states in quantum wells formed in the transition layer near the heterointerface is shown. It is demonstrated that the maximum of the intensity of the electroluminescence spectrum of the heterostructure under study is rearranged when a forward external bias is applied. The results of this study can be used in the development of tunable light-emitting diodes operating in the midinfrared range of 2–4 μm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical properties and structural investigations of (11-22)-oriented GaN/Al{sub 0.5}Ga{sub 0.5}N quantum wells grown by molecular beam epitaxy

We have grown (11-22)-oriented GaN/Al{sub 0.5}Ga{sub 0.5}N quantum wells (QWs) using molecular beam epitaxy on GaN (11-22)-oriented templates grown by metal-organic vapor phase epitaxy on m-plane oriented sapphire substrates. The performance of epitaxial growth of GaN/Al{sub 0.5}Ga{sub 0.5}N heterostructures on the semi-polar orientation (11-22) in terms of surface roughness and structural properties, i.e., strain relaxation mechanisms is discussed. In addition, high resolution transmission electron microscopy reveals very smooth QW interfaces. The photoluminescence of such samples are strictly originating from radiative recombination of free excitons for temperatures above 100 K. At high temperature, the population of localized excitons, moderately trapped (5 meV) at low temperature, is negligible.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

In situ controlled heteroepitaxy of single-domain GaP on As-modified Si(100)

Metalorganic vapor phase epitaxy of III-V compounds commonly involves arsenic. We study the formation of atomically well-ordered, As-modified Si(100) surfaces and subsequent growth of GaP/Si(100) quasisubstrates in situ with reflection anisotropy spectroscopy. Surface symmetry and chemical composition are measured by low energy electron diffraction and X-ray photoelectron spectroscopy, respectively. A two-step annealing procedure of initially monohydride-terminated, (1 × 2) reconstructed Si(100) in As leads to a predominantly (1 × 2) reconstructed surface. GaP nucleation succeeds analogously to As-free systems and epilayers free of antiphase disorder may be grown subsequently. The GaP sublattice orientation, however, is inverted with respect to GaP growth on monohydride-terminated Si(100)

36 MATERIALS SCIENCE↗

Impact of barrier thickness on transistor performance in AlN/GaN high electron mobility transistors grown on free-standing GaN substrates

A series of six ultrathin AlN/GaN heterostructures with varied AlN thicknesses from 1.5–6 nm have been grown by molecular beam epitaxy on free-standing hydride vapor phase epitaxy GaN substrates. High electron mobility transistors (HEMTs) were fabricated from the set in order to assess the impact of barrier thickness and homo-epitaxial growth on transistor performance. Room temperature Hall characteristics revealed mobility of 1700 cm{sup 2}/V s and sheet resistance of 130 Ω/□ for a 3 nm thick barrier, ranking amongst the lowest room-temperature sheet resistance values reported for a polarization-doped single heterostructure in the III-Nitride family. DC and small signal HEMT electrical characteristics from submicron gate length HEMTs further elucidated the effect of the AlN barrier thickness on device performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Si{sub 3}N{sub 4} layers for the in-situ passivation of GaN-based HEMT structures

A method for the in situ passivation of GaN-based structures with silicon nitride in the growth chamber of a metal organic vapor phase epitaxy (MOVPE) reactor is described. The structural and electrical properties of the obtained layers are investigated. The in situ and ex situ passivation of transistor structures with silicon nitride in an electron-beam-evaporation device are compared. It is shown that ex situ passivation changes neither the initial carrier concentration nor the mobility. In situ passivation makes it possible to protect the structure surface against uncontrollable degradation upon the finishing of growth and extraction to atmosphere. In the in situ passivated structure, the carrier concentration increases and the mobility decreases. This effect should be taken into account when manufacturing passivated GaN-based transistor structures.

36 MATERIALS SCIENCE↗

Low temperature p-type doping of (Al)GaN layers using ammonia molecular beam epitaxy for InGaN laser diodes

We demonstrate state-of-the-art p-type (Al)GaN layers deposited at low temperature (740 °C) by ammonia molecular beam epitaxy (NH{sub 3}-MBE) to be used as top cladding of laser diodes (LDs) with the aim of further reducing the thermal budget on the InGaN quantum well active region. Typical p-type GaN resistivities and contact resistances are 0.4 Ω cm and 5 × 10{sup −4} Ω cm{sup 2}, respectively. As a test bed, we fabricated a hybrid laser structure emitting at 400 nm combining n-type AlGaN cladding and InGaN active region grown by metal-organic vapor phase epitaxy, with the p-doped waveguide and cladding layers grown by NH{sub 3}-MBE. Single-mode ridge-waveguide LD exhibits a threshold voltage as low as 4.3 V for an 800 × 2 μm{sup 2} ridge dimension and a threshold current density of ∼5 kA cm{sup −2} in continuous wave operation. The series resistance of the device is 6 Ω and the resistivity is 1.5 Ω cm, confirming thereby the excellent electrical properties of p-type Al{sub 0.06}Ga{sub 0.94}N:Mg despite the low growth temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗