Search NASA⌕ Search

SEARCH · Search NASA

Results for “anionic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Applications of MP-1 anion exchange resin and Eichrom LN resin in berkelium-249 purification

Purification of berkelium-249 ( 249 Bk) at Oak Ridge National Laboratory requires a multi-step process with Bk Finishing as the final step. The current multi-process takes 6–7 months, including ~ 3 months spent on Bk Finishing. Recent trials of using columns of either LN resin or MP-1 anion exchange resin adsorbing the tetravalent 249 Bk4+ in 8M HNO 3 -0.5M NaBrO 3 , followed by eluting impurities (e.g. Ce 4+ , Cf 3+ ) and stripping 249 Bk resulted in a new dual column method of selectively separating 249 Bk from other trans-curium elements and fission product impurities, which is proposed to replace the current Bk Finishing with higher Bk purification efficiency and shorter processing period. This paper displays the experimental results and describes the dual column method with relevant chemistry issues.

Du, Miting (ORCID:0000000336741567)↗
DOE OSTI2019

Synthesis and structure of new anionic five-coordinate silicon complexes derived from α-hydroxy acids and 1-methylpiperazine-2,5-dione

Anionic five-coordinate complexes with two bis-O,O’-chelating ligands bearing α-hydroxy acid moieties, dicyclohexylammonium salts Cy{sub 2}NH{sub 2}{sup +}{PpnCH_2Si[OCR_2C(O)O]_2}{sup −} (Cy is cyclohexyl, PpnCH{sub 2} is 4-methyl-2,5-dioxopiperazin-1-ylmethyl, R = Me, Ph), were synthesized by esterification of alkoxysilane PpnCH{sub 2}Si(OMe){sub 3} with α-hydroxy acids (dimethyl- and diphenylgylcolic acids) in the presence of dicyclohexylamine. The five-coordinated state of the silicon atom in the resulting compounds in solution was confirmed by {sup 29}Si NMR spectroscopy. According to the X-ray diffraction data, the synthesized compounds contain the SiCO{sub 4} coordination unit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Enhanced mobility of cations and anions in the redox state: The polaronium mechanism

Hugely enhanced slow-ion diffusivity has been widely observed under extreme redox conditions and for unclear reasons. Aided by first-principles calculations on model systems of ZrO 2 , CeO 2 , BaTiO 3 and Li 4/3 Mn 2/3 O 2 , here we successfully explained the intriguing phenomenon by a polaronium mechanism. We found a polaronium, defined as a transitory complex of a polaronic electron or hole and a migrating counterion, becomes highly mobile when the counterion comes from a d 0 or f 0 cation (e.g., Zr 4+ , Ti 4+ and Ce 4 ) or a p 6 anion (e.g., O 2- ) in the host compound. Upon a redox reaction, the complex attains a d 1 /f 1 or p 5 configuration, which spontaneously forms because it is favored by an electron-phonon interaction (manifest as the Jahn-Teller effect in high symmetry systems) that enables local relaxation and lowers the system energy. Here our calculations found such interaction reaching its peak at the saddle point where the local environment is softest, so soft that it allows a reorientation of the anisotropic d/f/p orbital to minimize the electron repulsion locally. Since the complex may dissolve after a successful ion-migration event, the redox electron/hole can be recycled to form another free-radical-like polaronium elsewhere, thereby enhancing ion migration repeatedly. The proposed polaronium mechanism, which also operates in ceramics doped with mixed-valence cations, is most relevant under dynamic and extreme thermal/field/irradiation conditions where extra electrons/holes are abundantly generated by non-equilibrium redox reactions. For such operations, some with emerging applications, our diffusion-enhancing mechanism may provide new theoretical insight to help understand their material/microstructure stability and performance.

36 MATERIALS SCIENCE↗
DOE OSTI2018

TMEM16F/ANO6, a Ca2+-activated anion channel, is negatively regulated by the actin cytoskeleton and intracellular MgATP

Highlights: • ANO6 current shows sluggish activation even with high [Ca{sup 2+}]{sub i}, and inactivation. • Actin cytoskeleton disruption accelerate both activation and inactivation of ANO6. • Intracellular MgATP further delays ANO6 activation, and prevent inactivation. • The effects of MgATP on ANO6 were overcome by actin inhibitor, cytochalasin-D. • State actin cytoskeleton is crucial for determining ANO6 activity in intact cells. Anoctamin 6 (ANO6/TMEM16F) is a recently identified membrane protein that has both phospholipid scramblase activity and anion channel function activated by relatively high [Ca{sup 2+}]{sub i}. In addition to the low sensitivity to Ca{sup 2+}, the activation of ANO6 Cl{sup −} conductance is very slow (>3–5 min to reach peak level at 10 μM [Ca{sup 2+}]{sub i}), with subsequent inactivation. In a whole-cell patch clamp recording of ANO6 current (I{sub ANO6,w-c}), disruption of the actin cytoskeleton with cytochalasin-D (cytoD) significantly accelerated the activation kinetics, while actin filament-stabilizing agents (phalloidin and jasplakinolide) commonly inhibited I{sub ANO6,w-c}. Inside-out patch clamp recording of ANO6 (I{sub ANO6,i-o}) showed immediate activation by raising [Ca{sup 2+}]{sub i}. We also found that intracellular ATP (3 mM MgATP in pipette solution) decelerated the activation of I{sub ANO6,w-c}, and also prevented the inactivation of I{sub ANO6,w-c}. However, the addition of cytoD still accelerated both activation and inactivation of I{sub ANO6,w-c}. We conclude that the actin cytoskeleton and intracellular ATP play major roles in the Ca{sup 2+}-dependent activation and inactivation of I{sub ANO6,w-c}, respectively.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Effects of anionic and nonionic surfactants on the dispersion and stability of nanoSiO2 in aqueous and cement pore solutions

It has been well recognized that the benefits and effectiveness of nanoparticles in cement-based materials could not be maximized if these are not well dispersed. To address this issue, in this study, different anionic (SDS and PCE) and nonionic surfactants (Tweens and Tritons) were used to disperse nanosilica (NS) in aqueous solution and cement pore solution. The results show that the dispersibility of NS in cement pore solution was improved, and the compressive strength of the cement-NS pastes increased linearly with critical micelle concentration (CMC) of nonionic surfactants. Among all surfactants studied, Triton X-405 led the paste to the highest increase in strength (33% at 1-day and 41% at 3-days) since it had the highest CMC. TEM and EDS analysis evidenced that this strength increase might be attributed to the nucleation of outer product CSH gel and its densification with calcite nanocrystals, attributed to Triton X-405 addition.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A simulation-based model studying monoethanolamine and aprotic heterocyclic anion ionic liquid (AHA-IL) mixtures for carbon capture

Capturing of waste CO 2 , particularly from large industrial point sources, is necessary for either permanent storage or CO 2 utilization. Amine solvents used for carbon capture have certain drawbacks, particularly the high energy required by the reboiler for solvent regeneration and degradation of the amine with absorption/regeneration cycling. These challenges may be overcome using ionic liquids (ILs) that can be tailored for operating under typical flue gas stream conditions (8–10% CO 2 , 18–20% H 2 O, 2–3% O 2 , and 67–72% N 2 ). ILs, however, oftentimes suffer from high viscosities, leading to diffusion limitations when compared to amine solvents. This work models the combinations of aprotic heterocyclic anion ILs (AHA-IL) with monoethanolamine (MEA) and studies the carbon capture effectiveness of these mixtures. Furthermore, this study found that all AHA-IL/MEA mixtures exhibited 32 % lower enthalpy of reaction (compared to MEA) and 64 % lower viscosity (compared to AHA-IL), which are desirable characteristics for CO 2 capture solvents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Polymer electrolytes based on protic ionic liquids with perfluorinated anions for safe lithium-ion batteries

Here, the quest for safe and high-performance polymer electrolytes in lithium-ion batteries (LIBs) has led researchers to explore protic ionic liquids (PILs) as potential candidates to be entrapped in polymer matrices. In this context, we present an investigation into solid polymeric systems based on poly(methyl methacrylate) (PMMA) as a host for PILs, featuring 1,8-diazabicyclo-[5,4,0]-undec-7-ene (DBU) cation paired with three different anions: bis(trifluoromethanesulfonyl)imide (TFSI – ), trifluoromethanesulfonate (TFO – ), and (trifluoromethanesulfonyl-nonafluorobutylsulfonyl)imide (IM14 – ). Additionally, we explore the lithium-doped IM14-gel-like system to broaden our understanding of these intriguing materials. Through comprehensive thermal analysis, solid-state NMR, and diffusion NMR techniques, we delve into the interactions and structural features of these binary and ternary polymeric systems. Our investigation reveals unique dynamics and ion interactions within the PMMA matrix, shedding light on the potential of these materials for advanced energy storage technologies. Particularly, we highlight the distinctive features of DBUH-IM14 and its specific interaction with the polymeric matrix and the lithium ions, underscoring its significance in advancing safer and more efficient energy storage devices.

25 ENERGY STORAGE↗
DOE OSTI2025

Anion exchange membranes based on (3-acrylamidopropyl) trimethylammonium chloride (APTA) and phenyl Acrylate: Impact of crosslinker and crosslinker content on physiochemical properties and transport behavior of acetate and formate

CO 2 reduction cells are innovative devices that convert CO 2 into valuable chemicals, such as formate (OFm - ) and acetate (OAc - ), at the cathode. One of the key challenges in these devices is the development of ion exchange membranes that enable the transport of charge carriers between electrodes while minimizing the transfer of CO 2 reduction products. This study focuses on the preparation and characterization of crosslinked anion exchange membranes (AEMs) made of phenyl acrylate (PA) and (3-acrylamidopropyl) trimethylammonium chloride (APTA), crosslinked with either poly(ethylene glycol) diacrylate (PEGDA) or N,N’-methylenebisacrylamide (MBAA). Here, the membranes are characterized to understand their physiochemical properties and corresponding transport behavior through characterization of water volume fraction, mechanical properties, ionic conductivity, ion exchange capacity, water contact angle, glass transition temperature as well as their permeability and solubility to formate and acetate. MBAA crosslinked membranes exhibit higher Young’s modulus and lower strain at break compared to PEGDA-crosslinked membranes, which is attributed to their shorter chain length. Within a series of membranes of varied comonomer content, for either PEGDA or MBAA as crosslinker, permeabilities generally follow free volume theory (increasing permeability with increasing water content where water content increases with decreasing crosslinker content). Interestingly, for membranes with different crosslinkers but analogous water volume fraction significant differences (∼2 orders of magnitude) in permeability are observed which we attribute to differences in chain mobility as characterized through the glass transition temperature.

25 ENERGY STORAGE↗
DOE OSTI2025

Analysis of anion exchange membrane water electrolyzer performance and its evolution over time

Understanding water, evolved gas, and ionic transport in membrane-electrode-assemblies (MEAs) is essential for the development of high performance and durable anion exchange membrane water electrolyzers (AEMWEs). This study evaluates the MEA conditioning process, operating conditions, and short-term stability in a 1 M potassium hydroxide (KOH) electrolyte, focusing on the underlying transport phenomena. We observe a significant initial voltage loss in continuous cell operation, which could be associated with gas bubble accumulation, transport layer or flow field passivation, and changes in the catalyst oxidation state. Further, we investigate the effects of materials and operational configurations, including the membrane type and thickness, and the electrolyte flow rate, including KOH being fed to both electrodes as well as to the anode only. Furthermore, the effect of membrane drying temperature on ex situ as well as in situ electrochemical performance is evaluated. Finally, we discuss 700 h of AEMWE operation at 1 A/cm 2 , highlighting the underlying degradation phenomena.

25 ENERGY STORAGE↗
DOE OSTI2019

Oxidation and anion lattice defect signatures of hypostoichiometric lanthanide-doped UO 2

A series of sintered UO 2 pellets doped with lanthanide (Ce, Nd, Yb) elements were investigated using powder X-ray diffraction, Raman spectroscopy, thermogravimetric analyses and differential scanning calorimetry. A combination of electron microprobe and thermogravimetric analyses, for oxygen content, enabled precise determination of the hypostoichiometry for lanthanide-doped samples at 1 and 5 atom percent. Two Raman laser wavelengths (785 and 455 nm) have afforded greater sensitivity to spectroscopic signatures of the phonon bands (1LO and 2LO) associated with oxidation of (U 1-y M y )O 2-x and the anion defects introduced by lanthanide substitution. Oxygen hypostoichiometry forces a reduction in the average coordination number surrounding (U,M) sites, which is compensated by a decrease in U-O bond length, and concomitantly the lattice parameter, consistent with the obtained Raman spectra. The evolution of O/M ratio up to (U 1-y M y )O 2 after oxidation was also examined using Raman spectroscopy, revealing that the ‘defect band’, including a component attributed to oxygen vacancies (~540 cm -1 ) and the 1LO phonon (~575 cm -1 ) increased in intensity with increasing dopant concentration and upon oxidation. Here, the lanthanide dopants inhibited oxidation to U 3 O 8 , most prominently for Yb 5 at%, having been delayed by ~180 °C. Thermogravimetric analyses reveal an early oxidation feature that may be related to influx of O to satisfy hypostoichiometry up to (U 1-y M y )O 2 , possibly stabilizing a U 4 O 9 or U 3 O 7 intermediate, delaying oxidation to U 3 O 8 .

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2019

On the origin of permanent performance loss of anion exchange membrane fuel cells: Electrochemical oxidation of phenyl group

The durability of alkaline anion exchange membrane fuel cells (AEMFCs) is a critical requirement for implementing this technology in cost-effective energy conversion. However, the lifetime of current AEMFCs is short, ca. < 1,000 h and the cause of the performance loss over time is poorly understood. Here, we investigate the origin of AEMFC unrecoverable performance loss. We diagnosed the recoverable performance loss induced by carbonation and anode flooding during an extended-term test with transient operating conditions. Multiple extended-term tests under current densities and the electrochemical and analytical analyses suggest that the most prominent permanent performance loss of AEMFCs occurs by phenol formation as a result of electrochemical phenyl oxidation of cathode ionomeric binder. The produced phenol is acidic and neutralizes the quaternary ammonium group to lower the local pH. Finally, the impact of this degradation pathway is discussed to explain the reported lifetime performance of current AEMFCs.

08 HYDROGEN↗
DOE OSTI2022

Self-adhesive ionomers for durable low-temperature anion exchange membrane electrolysis

Low-temperature water electrolysis using an anion conductive polymer electrolyte has several potential advantages over other technologies, however, the fabrication of durable alkaline electrodes remains a challenge. Detachment of catalysts results in the loss of electrochemical surface area. Simple mixtures of ionomer and catalyst can suffer from poor catalyst adhesion because only physical adhesion is used to bind the components together. A family of chemically bonded, self-adherent, hydroxide conducting ionomers were synthesized and tested under alkaline electrolysis conditions with nickel ferrite anode electrocatalysts and platinum-nickel cathode catalyst. The ionomers are based on hydroxide conducting poly(norbornene) polymers used as the solid polymer electrolyte in alkaline fuel cells and electrolyzers. The synthesized terpolymer ionomers have been functionalized to provide pendant sites for covalent chemical bonding of bis(phenyl)-A-diglycidyl ether to the ionomer, catalyst, and porous transport layer. The electrodes show excellent adhesion between the catalyst particles, porous transport layer and ionomer, as determined by adhesion measurements and electrolysis performance. As a result, the AEM electrolyzer had stable voltage performance under high current density (1 A/ cm 2 at 1.83 V (67% voltage efficiency)) for extended time periods (>600 h) without degradation.

08 HYDROGEN↗
DOE OSTI2023

Design and operating principles for high-performing anion exchange membrane water electrolyzers

Anion-exchange-membrane water electrolyzers (AEMWEs) provide a promising pathway to utilize low-carbon renewable electricity to produce clean hydrogen at high efficiency and purity, while maintaining low system costs compared to incumbent technologies. Though significant progress has been made in developing membranes and catalysts, AEMWEs still require better performance and durability to realize widespread deployment. Here, we overcome these challenges by decoupling anode and cathode polarization behavior via integration of a reference electrode in the membrane-electrode assembly. This measurement identified that the mass-transport losses dominate the cathode overpotential if feeding with electrolytes, while kinetic losses dominate the anode overpotential. These losses are mitigated by varying electrode properties and operating strategies, where a more hydrophobic, optimal loaded cathode, a high porosity anode, and operating with the cathode dry exhibited the best performance. These findings eventually enabled achieving a high-performing and durable complete PGM-free AEMWE operating at 1.5 Acm –2 for over 500h with negligible degradation, demonstrating significant progress for AEMWEs.

25 ENERGY STORAGE↗
DOE OSTI2024

Effect of stoichiometry and hydration level on water domain size and transport in poly(aryl piperidinium) alkaline anion-exchange membranes

Alkaline water electrolysis holds promise in decarbonizing the global economy by enabling renewable hydrogen production with non-precious group metal catalysts. Anion exchange membranes are an important component of alkaline water electrolyzers and would ideally be durable while allowing for high hydroxide conductivity. The poly(aryl piperidinium) (PAP) class of polymers has attracted recent interest due to their good mechanical robustness and high ionic conductivity. Here, in this work, we perform atomistic molecular dynamics (MD) simulations of several PAP polymers at experimentally relevant hydration levels and polymer ion exchange capacities (IECs) to gain nanoscale insight into their properties and to help elucidate the trade-offs that result from tuning the IECs through the polymer stoichiometry. Our MD-predicted macroscopic polymer properties were found to be in good agreement with experimentally available polymer swelling ratios, water-occupied volumes, X-ray scattering, and ionic conductivities. The models show that for hydration levels greater than 8H 2 O per cation a single water cluster will form that percolates through the system. The growth in water cluster size results in large polymer swelling, the creation of larger channels with widths of 7 Å or larger, and nanophase separation between the hydrophilic domains and the polymer with characteristic length scales of approximately 20–30 Å. The experimentally observed lack of a strong X-ray scattering peak at low wavevectors can be explained by a cancellation between the polymer-polymer/water-water and polymer-water correlations and not a loss in nanophase separation. The overlap in coordination environments of the hydroxide oxygen and polymer nitrogen atoms implies that vehicular diffusion between cationic groups could play a role in hydroxide transport. The polymers' hydroxide and water diffusion constants increase by approximately an order of magnitude between hydration levels of 8 and 20H 2 O per cation. However, there are diminishing returns in hydroxide diffusion constant once the IEC exceeds 2.4 meq/g.

08 HYDROGEN↗
DOE OSTI2025

Single and Dual-Solute Transport in Quaternary Ammonium-Functionalized Anion Exchange Membranes: Isolating the Impact of Water Volume Fraction

Membranes are essential components of photoelectrochemical CO 2 reduction cells (PEC-CRC), as they regulate solute transport and impact device efficiency. These cells are a promising approach for converting carbon dioxide into valuable chemicals. However, electrochemical reactions involve not just a single electrolyte; membrane transport typically includes multiple electrolytes. When a mixture of solutes is present, the presence of one solute in the membrane can impact the diffusion and sorption of other solutes. In complex systems where multiple solutes are diffusing simultaneously through a hydrated, dense polymer membrane, the resulting transport behavior is poorly understood. This study highlights the individual and two solute transport behavior of potassium formate, acetate, and bicarbonate ions in neutral membranes and quaternary ammonium-functionalized anion exchange membranes (AEMs) based on phenyl acrylate polymer backbones. By isolating the effect of water content, we emphasize how fixed charge density and solute-membrane interactions influence transport behavior. In neutral membranes, the diffusivity follows the order of potassium formate > potassium acetate > potassium bicarbonate. However, in AEMs, the order shifts due to changes in ion-membrane interactions, with potassium bicarbonate diffusivity surpassing that of potassium acetate. These results underscore the importance of ion exchange membranes and ion-membrane interaction in modulating transport properties, providing valuable insights for optimizing membranes in electrochemical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Understanding how single-atom site density drives the performance and durability of PGM-free Fe–N–C cathodes in anion exchange membrane fuel cells

One of the most important needs for the future of low-cost fuel cells is the development of highly active platinum group metal (PGM)-free catalysts. For the oxygen reduction reaction, Fe–N–C materials have been widely studied in both acid and alkaline media. However, reported catalysts in the literature show quite different intrinsic activity and in-cell performance, despite similar synthesis routes and precursors. Here, two types of Fe–N–C are prepared from the same precursor and procedure – the main difference is how the precursor was handled prior to use. It is shown that in one case Fe overwhelmingly existed as highly active single-metal atoms in FeN4 coordination (preferred), while in the other case large Fe particles coexisting with few single metal atoms were obtained. As a result, there were drastic differences in the catalyst structure, activity, and especially in their performance in an operating anion exchange membrane fuel cell (AEMFC). Additionally, it is shown that catalyst layers created from single-atom-dominated Fe–N–C can have excellent performance and durability in an AEMFC using H 2 /O 2 reacting gases, achieving a peak power density of 1.8 W cm -2 – comparable to similar AEMFCs with a Pt/C cathode – and being able to operate stably for more than 100 h. Finally, the Fe–N–C cathode was paired with a low-loading PtRu/C anode electrode to create AEMFCs (on H 2 /O 2 ) with a total PGM loading of only 0.135 mg cm -2 (0.090 mg Pt cm -2 ) that was able to achieve a very high specific power of 8.4 W mg PGM -1 (12.6 W mg Pt< sup>-1 ).

36 MATERIALS SCIENCE↗
DOE OSTI2020

Anion and cation co-doping of Na 4 SnS 4 as sodium superionic conductors

Na based all-solid-state batteries are one of the most promising candidates for large-scale electrochemical energy storage owing to their low cost and outstanding safety properties. The key enabler of this technology is solid electrolyte with sufficiently high ionic conductivity at room temperature. In this work, the design, synthesis, characterization and testing of a series of novel fast Na-ion conductors, Na 4-x-y Sn 1-x A x S 4-y X y with aliovalent cation (P 5+ /Sb 5+ ) and anion substitutions (Cl - /Br - ) of the parent compound Na 4 SnS 4 are reported. The doped samples crystalize in a new phase with space group I4 1 /acd and show ionic conductivities that are one to four orders of magnitude higher than that of undoped Na 4 SnS 4 . R. t. conductivity of 0.64 mS cm -1 is achieved in Na 3.7 Sn 0.8 Sb 0.2 S 3.9 Cl 0.1 with a low activation energy of 0.26 eV. Furthermore, Rietveld refinement against high resolution synchrotron X-ray powder diffraction data reveals that the distribution of the doping ions and the resulted Na vacancies are underlying cause of the enhanced conductivity.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Negligible voltage hysteresis with strong anionic redox in conventional battery electrode

Lattice anionic (oxygen) redox reactions (ARR) offers opportunities for developing high-capacity batteries, however, often suffers the notoriously high hysteresis in voltages and low initial coulombic efficiency. Particularly, ARR was widely considered inherent to these kinetic issues. Here, unambiguous evidences of strong and reversible ARR is found in Na 2/3 Ni 1/3 Mn 2/3 O 2 through mapping of resonant inelastic X-ray scattering (mRIXS). Strikingly, the material displays negligible voltage hysteresis (0.1 V) and high initial coulombic efficiency with a highly stable electrochemical profile. Our independent analysis of the Ni, Mn and O states consistently interpret the redox mechanism of Na 2/3 Ni 1/3 Mn 2/3 O 2 , which reveals a strong ARR system with facile kinetics and highly stable electrochemical profile that previously found only in cationic redox systems of conventional non-Alkali-rich materials.

25 ENERGY STORAGE↗