Search NASA⌕ Search

SEARCH · Search NASA

Results for “beam driven”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Generation and pointing stabilization of multi-GeV electron beams from a laser plasma accelerator driven in a pre-formed plasma waveguide

Laser pulses with peak power 0.3 PW were used to generate electron beams with energy >4 GeV within a 9 cm-long capillary discharge waveguide operated with a plasma density of ≈7×10{sup 17} cm{sup −3}. Simulations showed that the super-Gaussian near-field laser profile that is typical of high-power femtosecond laser systems reduces the efficacy of guiding in parabolic plasma channels compared with the Gaussian laser pulses that are typically simulated. In the experiments, this was mitigated by increasing the plasma density and hence the contribution of self-guiding. This allowed for the generation of multi-GeV electron beams, but these had angular fluctuation ≳2 mrad rms. Mitigation of capillary damage and more accurate alignment allowed for stable beams to be produced with energy 2.7±0.1 GeV. The pointing fluctuation was 0.6 mrad rms, which was less than the beam divergence of ≲1 mrad full-width-half-maximum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of beam limiting aperture and collector potential on multi-element focused ion beams

A compact microwave driven plasma based multi-element focused ion beam system has been developed. In the present work, the effect of reduced beam limiter (BL) aperture on the focused ion beam parameters, such as current and spot size, and a method of controlling beam energy independently by introducing a biased collector at focal point (FP) are investigated. It is found that the location of FP does not change due to the reduction of BL aperture. The location of FP and beam size are found to be weakly dependent on the collector potential in the range from -8 kV to -18 kV.

43 PARTICLE ACCELERATORS↗

Density effect on relativistic electron beams in a plasma fiber

Intense short-petawatt-laser driven relativistic electron beams in a hollow high-Z plasma fiber embedded in low-Z plasmas of different densities are studied. When the plasma is of lower density than the hollow fiber, resistive filamentation of the electron beam is observed. It is found that the electron motion and the magnetic field are highly correlated with tens of terahertz oscillation frequency. Depending on the material property around the hollow fiber and the plasma density, the beam electrons can be focused or defocused as it propagates in the plasma. Relativistic electron transport and target heating are also investigated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Single shot cell irradiations with laser-driven protons

Ion beams are relevant for radiobiological studies in basic research and for application in tumor therapy. Here we present a method to generate nanosecond proton bunches with single shot doses of up to 7 Gray by a tabletop high-power laser. Although in their infancy, laser-ion accelerators allow studying fast radiobiological processes at small-scale laboratories as exemplarily demonstrated by measurements of the relative biological effectiveness of protons in human tumor cells.

43 PARTICLE ACCELERATORS↗

Bidirectional jet formation during driven magnetic reconnection in two-beam laser-plasma interactions

Measurements of the bidirectional plasma jets that form at the surface of a solid target during a laser-generated driven magnetic reconnection are presented. Resistivity enhancement of at least 25x the classical Spitzer value is required when applying the Sweet-Parker model of reconnection to reconcile the experimentally observed reconnection time scale. Analytic calculations show that a fast reconnection model, which includes a priori the effects of microturbulent resistivity enhancement, better reproduces the experimental observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A treatment planning study to assess the feasibility of laser-driven proton therapy using a compact gantry design

Purpose: Laser-driven proton acceleration is suggested as a cost- and space-efficient alternative for future radiation therapy centers, although the properties of these beams are fairly different compared to conventionally accelerated proton beams. The laser-driven proton beam is extremely pulsed containing a very high proton number within ultrashort bunches at low bunch repetition rates of few Hz and the energy spectrum of the protons per bunch is very broad. Moreover, these laser accelerated bunches are subject to shot-to-shot fluctuations. Therefore, the aim of this study was to investigate the feasibility of a compact gantry design for laser-driven proton therapy and to determine limitations to comply with. Methods: Based on a published gantry beam line design which can filter parabolic spectra from an exponentially decaying broad initial spectrum, a treatment planning study was performed on real patient data sets. All potential parabolic spectra were fed into a treatment planning system and numerous spot scanning proton plans were calculated. To investigate limitations in the fluence per bunch, the proton number of the initial spectrum and the beam width at patient entrance were varied. A scenario where only integer shots are delivered as well as an intensity modulation from shot to shot was studied. The resulting plans were evaluated depending on their dosimetric quality and in terms of required treatment time. In addition, the influence of random shot-to-shot fluctuations on the plan quality was analyzed. Results: The study showed that clinically relevant dose distributions can be produced with the system under investigation even with integer shots. For small target volumes receiving high doses per fraction, the initial proton number per bunch must remain between 1.4 × 10{sup 8} and 8.3 × 10{sup 9} to achieve acceptable delivery times as well as plan qualities. For larger target volumes and standard doses per fraction, the initial proton number is even more restricted to stay between 1.4 × 10{sup 9} and 2.9 × 10{sup 9}. The lowest delivery time that could be reached for such a case was 16 min for a 10 Hz system. When modulating the intensity from shot to shot, the delivery time can be reduced to 6 min for this scenario. Since the shot-to-shot fluctuations are of random nature, a compensation effect can be observed, especially for higher laser shot numbers. Therefore, a fluctuation of ±30% within the proton number does not translate into a dosimetric deviation of the same size. However, for plans with short delivery times these fluctuations cannot cancel out sufficiently, even for ±10% fluctuations. Conclusions: Under the analyzed terms, it is feasible to achieve clinically relevant dose distributions with laser-driven proton beams. However, to keep the delivery times of the proton plans comparable to conventional proton plans for typical target volumes, a device is required which can modulate the bunch intensity from shot to shot. From the laser acceleration point of view, the proton number per bunch must be kept under control as well as the reproducibility of the bunches.

60 APPLIED LIFE SCIENCES↗

The Importance of the Cathode Plume and Its Interactions with the Ion Beam in Numerical Simulations of Hall Thrusters

Hall2De is a first-principles, 2-D axisymmetric code that solves the equations of motion for ions, electrons, and neutrals on a magnetic-field-aligned grid. The computational domain downstream of the acceleration channel exit plane is large enough to include self-consistently the cathode boundary. In this paper, we present results from numerical simulations of the H6 laboratory thruster with an internally mounted cathode, with the aim of highlighting the importance of properly accounting for the interactions between the ion beam and cathode plume. The anomalous transport of electrons across magnetic field lines in Hall2De is modelled using an anomalous collision frequency, νanom, yielding νanom approximately equal to omega ce (i.e., the electron cyclotron frequency) in the plume. We first show that restricting the anomalous collision frequency to only regions where the current density of ions is large does not alter the plasma discharge in the Hall thruster as long as the interaction between the ion beam and the cathode plume is captured properly in the computational domain. This implies that the boundary conditions must be placed sufficiently far as to not interfere with the electron transport in this region. These simulation results suggest that electron transport across magnetic field lines occurs largely inside the beam and may be driven by the interactions between beam ions and electrons. A second finding that puts in relevance the importance of including the cathode plume in numerical simulations is on the significance of accounting for the ion acoustic turbulence (IAT), now known to occur in the vicinity of the cathode exit. We have included in the Hall2De simulations a model of the IAT-driven anomalous collision frequency based on Sagdeev's model for saturation of the ion-acoustic instability. This implementation has allowed us to achieve excellent agreement with experimental measurements in the near plume obtained during the operation of the H6 thruster at nominal conditions (300V, 20A) and chamber background pressure of approximately 1.5 x 10(exp -5) Torr. In addition, the numerical results obtained with the latter approach exhibit less sensitivity to background pressure than previous attempts at explaining the features of the plasma properties in the near plume.

Lopez Ortega, Alejandro↗

Negative hydrogen ion beam extraction from an AC heated cathode driven Bernas-type ion source

A plasma grid structure was installed to a Bernas-type ion source used for ion implantation equipment. A negative hydrogen (H{sup −}) ion beam was extracted by an AC driven ion source by adjusting the bias to the plasma grid. The extracted electron current was reduced by positively biasing the plasma grid, while an optimum plasma grid bias voltage for negative ion beam extraction was found to be positive 3 V with respect to the arc chamber. Source operations with AC cathode heating show extraction characteristics almost identical to that with DC cathode heating, except a minute increase in H{sup −} current at higher frequency of cathode heating current.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Experimental Observation of a Current-Driven Instability in a Neutral Electron-Positron Beam

Here, we report on the first experimental observation of a current-driven instability developing in a quasineutral matter-antimatter beam. Strong magnetic fields (≥ 1T) are measured, via means of a proton radiography technique, after the propagation of a neutral electron-positron beam through a background electron-ion plasma. The experimentally determined equipartition parameter of ε B ≈ 10 -3 is typical of values inferred from models of astrophysical gamma-ray bursts, in which the relativistic flows are also expected to be pair dominated. The data, supported by particle-in-cell simulations and simple analytical estimates, indicate that these magnetic fields persist in the background plasma for thousands of inverse plasma frequencies. The existence of such long-lived magnetic fields can be related to analog astrophysical systems, such as those prevalent in lepton-dominated jets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Strong Langmuir turbulence generated by electron beams - Electric-field distributions and electron scattering

Strong turbulence and transit-time scattering theory are applied here to calculate the statistical distribution of intense Langmuir fields and the consequent beam scattering in plasma turbulence driven by an electron beam. The experimentally observed electric-field distributions are compared with predictions of strong-turbulence theory, concentrating on the wave levels, the Gaussian tail of the high-field distribution observed in one experiment, the arrest scale of collapse, and the fractional volume occupied by the highest fields. The Guassian form of the tail is confirmed, and the results imply that the collapse is arrested at a scale where the peak electrostatic energy density is of the same order as the thermal energy density. The theory of transit-time interactions is generalized to include relativistic particle dynamics and is applied to predict the scattering of the beam electrons in energy and angle as they pass through strong Langmuir turbulence. The results support the validity of the recently developed scaling theory of strong turbulence.

Robinson, P. A.↗

Reversible wettability of electron-beam deposited indium-tin-oxide driven by ns-UV irradiation

Indium tin oxide (ITO) is one of the most widely used semiconductor oxides in the field of organic optoelectronics, especially for the realization of anode contacts. Here the authors report on the control of the wettability properties of ITO films deposited by reactive electron beam deposition and irradiated by means of nanosecond-pulsed UV irradiation. The enhancement of the surface water wettability, with a reduction of the water contact angle larger than 50 deg., is achieved by few tens of seconds of irradiation. The analyzed photo-induced wettability change is fully reversible in agreement with a surface-defect model, and it can be exploited to realize optically transparent, conductive surfaces with controllable wetting properties for sensors and microfluidic circuits.

36 MATERIALS SCIENCE↗

Fast magnetic reconnection driven by ponderomotive force in two-beam laser-solid interactions

The magnetic reconnection phenomenon has been repeatedly observed in laser plasmas. A fast magnetic-reconnection model driven by the ponderomotive force was developed to explain the phenomenon in two-beam laser-solid interactions. Properties of the magnetic-reconnection process, such as the reconnection time scale and jet velocity, are obtained with classical values of the Spitzer resistivity. Our results are consistent with experimental measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Excitation of kinetic Alfvén waves by fast electron beams

Energetic electron beams, which are ubiquitous in a large variety of active phenomena in space and astrophysical plasmas, are one of the most important sources that drive plasma instabilities. In this paper, taking account of the return-current effect of fast electron beams, kinetic Alfvén wave (KAW) instability driven by a fast electron beam is investigated in a finite-β plasma of Q < β < 1 (where β is the kinetic-to-magnetic pressure ratio and Q ≡ m{sub e} /m{sub i} is the mass ratio of electrons to ions). The results show that the kinetic resonant interaction of beam electrons is the driving source for KAW instability, unlike the case driven by a fast ion beam, where both the kinetic resonant interaction of beam ions and the return-current are the driving source for the KAW instability. KAW instability has a nonzero growth rate in the range of the perpendicular wave number, 0<k{sub ⊥}<k{sub ⊥}{sup u}, and the maximum growth rate, γ {sup m}, occurs between 0.5k{sub ⊥}{sup u}<k{sub ⊥}{sup m}<0.8k{sub ⊥}{sup u}. Both the maximal growing perpendicular wave number k{sub ⊥}{sup m} and the maximal growth rate γ {sup m} depend sensitively on the velocity of electron beam v{sub b} , and the most favorable beam velocity occurs between 8v{sub A} < v{sub b} < 10v{sub A} . On the other hand, the excited KAWs are weakly dispersive with k ρ {sub i} < 1 and have the maximum growth rate at relatively low perpendicular wave numbers in the range 0.3<k{sub ⊥}{sup m}ρ{sub i}<0.6 for a beam velocity v{sub b} < 10v{sub A} . A possible application to the upward electron beams in the terrestrial magnetosphere is briefly discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Generation of broadband electrostatic noise by ion beam instabilities in the magnetotail

Particle data from ISEE 1 sampled in the earth's magnetotail show the presence of energetic ion beams in the boundary layer of the plasma sheet. A theory of instabilities driven by the beams is developed and compared with wave data sampled simultaneously to the particle data. It is concluded that the ion beams generate broadband electrostatic bursts of noise. The electrostatic noise correlates well with the occurrence of the beams, and the spectrum is consistent with that predicted from a negative energy beam instability under magnetotail conditions. The theory predicts that a spectrum of growing waves can be driven for frequencies from 0.001 omega(pe) up to omega(pe), the electron plasma frequency, with a spectral peak typically near 0.01 omega(pe) or lower, in agreement with the wave data. Furthermore, as one moves away from the source region perpendicular to the magnetic field, the high frequency components of the observed wave spectra are predicted to disappear gradually, leaving the low frequency part of the spectrum, also as is observed. Evidence is given for significant pitch angle scattering of the beams by the broadband electrostatic noise, leading to more isotropic ion distributions.

Grabbe, C. L.↗

The electromagnetic ion cyclotron beam anisotropy instability

Electromagnetic instabilities driven by an anisotropic, relatively cool ion beam are studied for the case in which both the beam and the instabilities propagate parallel or antiparallel to a uniform magnetic field. At modest beam-core relative drift speeds, sufficiently large perpendicular-to-parallel beam temperature ratios and sufficiently large plasma beta, the mode of fastest growth rate is the ion cyclotron beam anisotropy instability. Because the right-hand polarized waves observed upstream of slow shocks in the earth's magnetotail can lead to the appropriate beam anisotropy, the ion cyclotron instability may be present and account for the left-hand polarized magnetic waves observed there. Also, because of its relatively low phase speed, the ion cyclotron beam anisotropy instability may provide the scattering necessary for ion Fermi acceleration at slow shocks of sufficiently high plasma beta.

Peter Gary, S.↗

Beam ion instability: Measurement, analysis, and simulation

A weak vertical coupled-bunch instability with oscillation amplitude of the order of a few μ m has been observed in SPEAR3 at nominal vacuum pressure. The instability becomes stronger with increasing neutral gas pressure as observed by turning off vacuum pumps, and becomes weaker when the vertical beam emittance is increased. These observations indicate that the vertical beam motion is driven by ions trapped in the periodic potential of the electron beam. In this paper we present a series of comprehensive beam measurements, impedance-based stability analysis, and numerical simulations of beam-ion interactions in SPEAR3. The effects of vacuum pressure, gas species, beam current, bunch fill pattern, chromaticity, and vertical beam emittance are investigated.

43 PARTICLE ACCELERATORS↗

Path to a single-stage, 100-GeV electron beam via a flying-focus-driven laser-plasma accelerator

Dephasingless laser wakefield acceleration (DLWFA), a novel laser wakefield acceleration concept based on the recently demonstrated “flying focus” technology, offers a new paradigm in laser-plasma acceleration that could advance the progress toward a TeV linear accelerator using a single-stage system without guiding structures. The recently proposed NSF OPAL laser facility could be the transformative technology that enables this grand challenge in laser-plasma acceleration. We review the viable parameter space for DLWFA based on the scaling of its performance with laser and plasma parameters, and we compare that performance to traditional laser wakefield acceleration. These scalings indicate the necessity for ultrashort, high-energy laser architectures such as NSF OPAL to achieve groundbreaking electron energies using DLWFA. Initial results from MTW-OPAL, the platform for the 6-J DLWFA demonstration experiment, show a tight, round focal spot over a distance of 3.7 mm. New particle-in-cell simulations of that platform indicate that using hydrogen for DLWFA reduces the amount of laser light that is distorted due to refraction at ionization fronts. An experimental path, and the computational and technical design work along that path, from the current status of the field to a single-stage, 100-GeV electron beam via DLWFA on NSF OPAL is outlined. Progress along that path is presented.

Shaw, J. L. [University of Rochester, NY (United S↗

Generation of Stable, Low-Divergence Electron Beams by Laser-Wakefield Acceleration in a Steady-State-Flow Gas Cell

Laser-driven, quasimonoenergetic electron beams of up to {approx}200 MeV in energy have been observed from steady-state-flow gas cells. These beams emitted within a low-divergence cone of 2.1{+-}0.5 mrad FWHM display unprecedented shot-to-shot stability in energy (2.5% rms), pointing (1.4 mrad rms), and charge (16% rms) owing to a highly reproducible gas-density profile within the interaction volume. Laser-wakefield acceleration in gas cells of this type provides a simple and reliable source of relativistic electrons suitable for applications such as the production of extreme-ultraviolet undulator radiation.

43 PARTICLE ACCELERATORS↗