Search NASA⌕ Search

SEARCH · Search NASA

Results for “bulk modulus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Effect of pressure on the structural properties of Li[Li{sub 0.1}Ni{sub 0.35}Mn{sub 0.55}]O{sub 2}

Li-rich cathode material Li[Li{sub 0.1}Ni{sub 0.35}Mn{sub 0.55}]O{sub 2} was synthesized by a sol-gel method. The morphology and a-NaFeO{sub 2} type structure of the material at ambient conditions were characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). The high-pressure behavior of the material was studied at pressure up to 19.7 GPa by using angle dispersive synchrotron X-ray powder diffraction (ADXD). The studies affirmed that the a-NaFeO{sub 2} type structure existed up to at least 19.7 GPa. Rietveld refinement analysis indicated that the c/a lattice parameter ratio decreased and the Li-O bond length shrunk with the increasing pressure, however, the Li{sup +}/Ni{sup 2+} ions exchange increased under elevated pressure. The pressure-volume data of the material were fitted to the third-order Birch-Murnaghan equation of state and bulk modulus obtained upon compression from the fitting was 117 (1) GPa.

36 MATERIALS SCIENCE↗

Structural and magnetic phase transition in samarium hydrogen system SmH{sub x} (x=1, 2, 3)

We report ab-initio calculations for the structural and magnetic phase transition of SmH{sub x} (x= 1, 2, 3) using the Vienna ab-initio simulation package (VASP). The non-spin polarized (NSP) and spin polarized (SP) calculations are performed for these hydrides at normal and high pressure. It is found that these compounds are stable in ferromagnetic state at normal pressure. The calculated lattice parameters and bulk modulus of these hydrides are in good agreement with the available experimental results. A pressure-induced structural phase transition from cubic to hexagonal phase in SmH and SmH{sub 2} and hexagonal to cubic phase in SmH{sub 3} is predicted. A pressure-induced ferromagnetic to nonmagnetic phase transition is observed in SmH, SmH{sub 2} and SmH{sub 3} at the pressures of 104 GPa, 76 GPa and 81 GPa respectively. Ferromagnetism is quenched in mono, di and tri hydrides at high pressures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, electronic, superconducting and mechanical properties of ReC and TcC

The structural, electronic, superconducting and mechanical properties of ReC and TcC are investigated using density functional theory calculations. The lattice constants, bulk modulus, and the density of states are obtained. The calculated lattice parameters are in good agreement with the available results. The density of states reveals that ReC and TcC exhibit metallic behavior at ambient condition. A pressure-induced structural phase transition is observed in both materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic structure and ground-state properties of Na{sub 2}Po: A first-principles study

Self-consistent scalar-relativistic band structure calculations have been performed to investigate the electronic structure and ground-state properties of Na{sub 2}Po in cubic antifluorite (anti-CaF{sub 2}-type) structure using the linear muffin-tin orbital in its tight-binding representation (TB-LMTO) method. Ground state properties such as equilibrium lattice constant and bulk modulus were calculated. The results of the electronic structure calculations show that Na{sub 2}Po is direct bandgap semiconductor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, electronic and thermal properties of Mo{sub 3}Ir superconductors

Self consistent first principle calculations on superconducting material Mo{sub 3}Ir of A15 phase have been performed to understand their fundamental characteristics of the structural, electronic and thermal properties. The bulk modulus (B{sub 0}), Debye temperature (θ{sub D}), density of states (N (E{sub F})) and electronic specific heat coefficient (γ) have been computed in terms of the electronic structure results obtained by using the tight-binding linear muffin tin orbital (TB-LMTO) method based on the density functional theory (DFT) within the local density approximation (LDA). Structural, electronic and thermal properties calculated here are found to corroborate well with the experimental and theoretical results of literature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic and optical properties of RESn{sub 3} (RE=Pr & Nd) intermetallics: A first principles study

A theoretical study of structural, electronic and optical properties of RESn{sub 3} (RE = Pr & Nd) intermetallics have been investigated systematically using first principles density functional theory. The calculations are carried out within the PBE-GGA and LSDA for the exchange correlation potential. The ground state properties such as lattice parameter (a{sub 0}), bulk modulus (B) and its pressure derivative (B′) are calculated and the calculated lattice parameters show well agreement with the experimental results. We first time predict elastic constants for these compounds. From energy dispersion curves, it is found that these compounds are metallic in nature. The linear optical response of these compounds are also studied and the higher value of static dielectric constant shows the possibility to use them as good dielectric materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and elastic anisotropy of crystals at high pressures and temperatures from quantum mechanical methods: The case of Mg{sub 2}SiO{sub 4} forsterite

We report accurate ab initio theoretical predictions of the elastic, seismic, and structural anisotropy of the orthorhombic Mg{sub 2}SiO{sub 4} forsterite crystal at high pressures (up to 20 GPa) and temperatures (up to its melting point, 2163 K), which constitute earth’s upper mantle conditions. Single-crystal elastic stiffness constants are evaluated up to 20 GPa and their first- and second-order pressure derivatives reported. Christoffel’s equation is solved at several pressures: directional seismic wave velocities and related properties (azimuthal and polarization seismic anisotropies) discussed. Thermal structural and average elastic properties, as computed within the quasi-harmonic approximation of the lattice potential, are predicted at high pressures and temperatures: directional thermal expansion coefficients, first- and second-order pressure derivatives of the isothermal bulk modulus, and P-V-T equation-of-state. The effect on computed properties of five different functionals, belonging to three different classes of approximations, of the density functional theory is explicitly investigated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural stability, vibrational, and bonding properties of potassium 1, 1′-dinitroamino-5, 5′-bistetrazolate: An emerging green primary explosive

Potassium 1,1′-dinitroamino-5,5′-bistetrazolate (K{sub 2}DNABT) is a nitrogen rich (50.3% by weight, K{sub 2}C{sub 2}N{sub 12}O{sub 4}) green primary explosive with high performance characteristics, namely, velocity of detonation (D = 8.33 km/s), detonation pressure (P = 31.7 GPa), and fast initiating power to replace existing toxic primaries. In the present work, we report density functional theory (DFT) calculations on structural, equation of state, vibrational spectra, electronic structure, and absorption spectra of K{sub 2}DNABT. We have discussed the influence of weak dispersive interactions on structural and vibrational properties through the DFT-D2 method. We find anisotropic compressibility behavior (b<a<c) from pressure dependent structural properties. The predicted equilibrium bulk modulus reveals that K{sub 2}DNABT is softer than toxic lead azide and harder than the most sensitive cyanuric triazide. A complete assignment of all the vibrational modes has been made and compared with the available experimental results. The calculated zone center IR and Raman frequencies show a blue-shift which leads to a hardening of the lattice upon compression. In addition, we have also calculated the electronic structure and absorption spectra using recently developed Tran Blaha-modified Becke Johnson potential. It is found that K{sub 2}DNABT is a direct band gap insulator with a band gap of 3.87 eV and the top of the valence band is mainly dominated by 2p-states of oxygen and nitrogen atoms. K{sub 2}DNABT exhibits mixed ionic (between potassium and tetrazolate ions) and covalent character within tetrazolate molecule. The presence of ionic bonding suggests that the investigated compound is relatively stable and insensitive than covalent primaries. From the calculated absorption spectra, the material is found to decompose under ultra-violet light irradiation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic structure of spinel oxides ZnSc{sub 2}O{sub 4} and ZnY{sub 2}O{sub 4}: A first principle study

The electronic structure spinel ZnSc{sub 2}O{sub 4} and ZnY{sub 2}O{sub 4} were studied by the self-consistent tight-binding linearized muffin-tin orbital method with the atomic sphere approximation. The calculated results predict these zinc-based spinel oxides to be direct-gap materials. The direct gap at Γ is found to value 3.9 eV for ZnSc{sub 2}O{sub 4} and 3.4 eV for ZnY{sub 2}O{sub 4}. The systematic decrease in the gap is attributed to the presence of 3d orbital’s of Zn and Sc/Y and the associated p–d hybridization in the upper valence band of ZnSc{sub 2}O{sub 4} and ZnY{sub 2}O{sub 4}. The value of lattice parameters, band gap, bulk modulus, are deduced and reported for the first time to our knowledge.

36 MATERIALS SCIENCE↗

First principle investigation of structural and electronic properties of bulk ZnSe

Electronic and structural properties of ZnSe are investigated using plane-wave self-consistent field method within the framework of density functional theory. The pseudopotential method within the local density approximation is used for the exchange-correlation potential. The equilibrium lattice parameter, static bulk modulus and its pressure derivative are calculated. The electronic band structure, partial density of states and density of states are also obtained. The results are compared with available theoretical calculations and experimental results.

36 MATERIALS SCIENCE↗

FP-LAPW based investigation of structural, electronic and mechanical properties of CePb{sub 3} intermetallic compound

A theoretical study of structural, electronic, elastic and mechanical properties of CePb{sub 3} intermetallic compound has been investigated systematically using first principles density functional theory. The calculations are carried out within the three different forms of generalized gradient approximation (GGA) and LSDA for the exchange correlation potential. The ground state properties such as lattice parameter (a{sub 0}), bulk modulus (B) and its pressure derivative (B′) are calculated and obtained lattice parameter of this compound shows well agreement with the experimental results. We have calculated three independent second order elastic constants (C{sub 11}, C{sub 12} and C{sub 44}), which has not been calculated and measured yet. From energy dispersion curves, it is found that the studied compound is metallic in nature. Ductility of this compound is analyzed using Pugh’s criteria and Cauchy's pressure (C{sub 11}-C{sub 12}). The mechanical properties such as Young's modulus, shear modulus, anisotropic ratio, Poison's ratio have been calculated for the first time using the Voigt–Reuss–Hill (VRH) averaging scheme. The average sound velocities (v{sub m}), density (ρ) and Debye temperature (θ{sub D}) of this compound are also estimated from the elastic constants.

36 MATERIALS SCIENCE↗

Behavior of sodium borosilicate glasses under compression using molecular dynamics

We have performed classical molecular dynamics simulations in order to study the changes under compression in the local and medium range structural properties of three sodium borosilicate glasses with varying sodium content. These glasses have been isostatically compressed up to 20 GPa and then decompressed in order to analyze the different mechanisms that affect densification, alongside with the permanent modifications of the structure after a full compression/decompression cycle. The results show that the atomic packing is the prominent characteristic that governs the amount of densification in the glass, as well as the setup of the permanent densification. During compression, the bulk modulus increases linearly up to approximately 15 GPa and more rapidly for higher pressures, a behavior which is reflected on the rate of increase of the average coordination for B and Na. Radial distribution functions at different pressures during the cycle help to quantify the amount of distortions in the elementary structural units, with a pronounced shortening of the Na–Na and Na–O bond lengths during compression. A subsequent decomposition of the glassy matrix into elementary Voronoi volumes verifies the high compressibility of Na-rich regions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical study of the thermodynamic properties, phase transition wave, and phase transition velocity for octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine

We develop a phonon-electron free energy model to study the thermodynamic properties and phase transitions of δ-octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine. The bulk modulus, thermal expansion coefficient, specific heat, Hugoniot curve, and phase transition curve are calculated in wide temperature and pressure ranges. The results are in agreement with the available experiments at zero pressure, and are reasonable predictions at high pressure for the lack of experiment. Two kinds of phase transition waves are investigated. We find the velocity of shock-induced phase transition wave is between 3400 m/s and 4700 m/s, and the velocity of self-sustaining phase transition wave is between 1300 m/s and 1900 m/s.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nucleation of liquid droplets and voids in a stretched Lennard-Jones fcc crystal

The method of molecular dynamics simulation has been used to investigate the phase decay of a metastable Lennard-Jones face-centered cubic crystal at positive and negative pressures. It is shown that at high degrees of metastability, crystal decay proceeds through the spontaneous formation and growth of new-phase nuclei. It has been found that there exists a certain boundary temperature. Below this temperature, the crystal phase disintegrates as the result of formation of voids, and above, as a result of formation of liquid droplets. The boundary temperature corresponds to the temperature of cessation of a crystal–liquid phase equilibrium when the melting line comes in contact with the spinodal of the stretched liquid. The results of the simulations are interpreted in the framework of classical nucleation theory. The thermodynamics of phase transitions in solids has been examined with allowance for the elastic energy of stresses arising owing to the difference in the densities of the initial and the forming phases. As a result of the action of elastic forces, at negative pressures, the boundary of the limiting superheating (stretching) of a crystal approaches the spinodal, on which the isothermal bulk modulus of dilatation becomes equal to zero. At the boundary of the limiting superheating (stretching), the shape of liquid droplets and voids is close to the spherical one.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Equation of state of liquid Indium under high pressure

We apply an equation of state of a power law form to liquid Indium to study its thermodynamic properties under high temperature and high pressure. Molar volume of molten indium is calculated along the isothermal line at 710K within good precision as compared with the experimental data in an externally heated diamond anvil cell. Bulk modulus, thermal expansion and internal pressure are obtained for isothermal compression. Other thermodynamic properties are also calculated along the fitted high pressure melting line. While our results suggest that the power law form may be a better choice for the equation of state of liquids, these detailed predictions are yet to be confirmed by further experiment.

36 MATERIALS SCIENCE↗

Structural and vibrational properties of single crystals of Scandia, Sc{sub 2}O{sub 3} under high pressure

We report the results of single-crystal X-ray diffraction and Raman spectroscopy studies of scandium oxide, Sc{sub 2}O{sub 3}, at ambient temperature under high pressure up to 55 and 28 GPa, respectively. Both X-ray diffraction and Raman studies indicated a phase transition from the cubic bixbyite phase (so-called C-Res phase) to a monoclinic C2/m phase (so-called B-Res phase) at pressures around 25–28 GPa. The transition was accompanied by a significant volumetric drop by ∼6.7%. In addition, the Raman spectroscopy detected a minor crossover around 10–12 GPa, which manifested in the appearance of new and disappearance of some Raman modes, as well as in softening of one Raman mode. We found the bulk modulus values of the both C-Res and B-Res phases as B{sub 0} = 198.2(3) and 171.2(1) GPa (for fixed B′ = 4), respectively. Thus, the denser high-pressure lattice of Sc{sub 2}O{sub 3} is much softer than the original lattice. We discuss possible mechanisms that might be responsible for the pronounced elastic softening in the monoclinic high-pressure phase in this “simple” oxide with an ultra-wide band gap.

36 MATERIALS SCIENCE↗

Structural, electronic and optical properties of well-known primary explosive: Mercury fulminate

Mercury Fulminate (MF) is one of the well-known primary explosives since 17th century and it has rendered invaluable service over many years. However, the correct molecular and crystal structures are determined recently after 300 years of its discovery. In the present study, we report pressure dependent structural, elastic, electronic and optical properties of MF. Non-local correction methods have been employed to capture the weak van der Waals interactions in layered and molecular energetic MF. Among the non-local correction methods tested, optB88-vdW method works well for the investigated compound. The obtained equilibrium bulk modulus reveals that MF is softer than the well known primary explosives Silver Fulminate (SF), silver azide and lead azide. MF exhibits anisotropic compressibility (b > a > c) under pressure, consequently the corresponding elastic moduli decrease in the following order: C{sub 22} > C{sub 11} > C{sub 33}. The structural and mechanical properties suggest that MF is more sensitive to detonate along c-axis (similar to RDX) due to high compressibility of Hg⋯O non-bonded interactions along that axis. Electronic structure and optical properties were calculated including spin-orbit (SO) interactions using full potential linearized augmented plane wave method within recently developed Tran-Blaha modified Becke-Johnson (TB-mBJ) potential. The calculated TB-mBJ electronic structures of SF and MF show that these compounds are indirect bandgap insulators. Also, SO coupling is found to be more pronounced for 4d and 5d-states of Ag and Hg atoms of SF and MF, respectively. Partial density of states and electron charge density maps were used to describe the nature of chemical bonding. Ag—C bond is more directional than Hg—C bond which makes SF to be more unstable than MF. The effect of SO coupling on optical properties has also been studied and found to be significant for both (SF and MF) of the compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A coarse-grain force field for RDX: Density dependent and energy conserving

We describe the development of a density-dependent transferable coarse-grain model of crystalline hexahydro-1,3,5-trinitro-s-triazine (RDX) that can be used with the energy conserving dissipative particle dynamics method. The model is an extension of a recently reported one-site model of RDX that was developed by using a force-matching method. The density-dependent forces in that original model are provided through an interpolation scheme that poorly conserves energy. The development of the new model presented in this work first involved a multi-objective procedure to improve the structural and thermodynamic properties of the previous model, followed by the inclusion of the density dependency via a conservative form of the force field that conserves energy. The new model accurately predicts the density, structure, pressure-volume isotherm, bulk modulus, and elastic constants of the RDX crystal at ambient pressure and exhibits transferability to a liquid phase at melt conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗