Search NASA⌕ Search

SEARCH · Search NASA

Results for “control electronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Electronic circuit for control or coupling of single charges or spins and methods therefor

A quantum dot structure having a split-gate geometry is provided. The quantum dot is configured for incorporation into a quantum dot array of a quantum processing unit. A gap between a reservoir accumulation gate and a quantum dot accumulation gate provides a tunnel barrier between an electric charge reservoir and a quantum dot well. An electrical potential applied to the gates defines a tunnel barrier height, width and charge tunneling rate between the well and the reservoir without relying on any barrier gate to control the charge tunneling rate.

Pioro-Ladriere, Michel↗

Interplay of Nanoscale Strain and Smectic Susceptibility in Kagome Superconductors

Exotic quantum solids can host electronic states that spontaneously break rotational symmetry of the electronic structure, such as electronic nematic phases and unidirectional charge density waves (CDWs). When electrons couple to the lattice, uniaxial strain can be used to anchor and control this electronic directionality. Here, we reveal an unusual impact of strain on unidirectional “smectic” CDW orders in kagome superconductors AV 3⁢ Sb 5 using spectroscopic-imaging scanning tunneling microscopy. We discover local decoupling between the smectic electronic director axis and the direction of anisotropic strain. While the two can generally be aligned along the same direction in regions of a small CDW gap, the tendency for alignment decreases in regions where the CDW gap is the largest. This feature, in turn, suggests nanoscale variations in smectic susceptibility, which we attribute to a combination of local strain and electron correlation strength. Overall, we observe an unusually high decoupling rate between the smectic electronic director of the three-state Potts order and anisotropic strain, revealing weak smectoelastic coupling in the CDW phase of kagome superconductors. This finding is phenomenologically different from the extensively studied nematoelastic coupling in the Ising nematic phase of Ising nematic phase of Fe-based superconductor bulk single crystals, providing a contrasting picture of how strain can control electronic unidirectionality in different families of quantum materials.

Wang, Yidi [Boston College, Chestnut Hill, MA (Uni↗

Active electron energy distribution function control in direct current discharge using an auxiliary electrode

The electron energy distribution functions are studied in the low voltage dc discharge with a constriction, which is a diaphragm with an opening. The dc discharge glows in helium and is sustained by the electron current emitted from a heated cathode. We performed kinetic simulations of dc discharge characteristics and electron energy distribution functions for different gas pressures (0.8 Torr-4 Torr) and discharge current of 0.1 A. The results of these simulations indicate the ability to control the shape of the electron energy distribution functions by variation of the diaphragm opening radius.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A line-of-sight electron cyclotron emission receiver for electron cyclotron resonance heating feedback control of tearing modes

An electron cyclotron emission (ECE) receiver inside the electron cyclotron resonance heating (ECRH) transmission line has been brought into operation. The ECE is extracted by placing a quartz plate acting as a Fabry-Perot interferometer under an angle inside the electron cyclotron wave (ECW) beam. ECE measurements are obtained during high power ECRH operation. This demonstrates the successful operation of the diagnostic and, in particular, a sufficient suppression of the gyrotron component preventing it from interfering with ECE measurements. When integrated into a feedback system for the control of plasma instabilities this line-of-sight ECE diagnostic removes the need to localize the instabilities in absolute coordinates.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Collaborative Research: Fundamental studies of plasma control using surface embedded electronic devices

The proposed study will investigate the effect of active electron injection of from electrode surfaces To the best of our knowledge, no such a study has ever been attempted even though it could lead to the formation of whole new classes of plasma based devices and systems. We are motivated by recent articles and simple theory which gives strong reason to believe that embedded electronic devices can be used to exert control over the SEE coefficient of semiconductor surfaces (and maybe other surface types as well). Furthermore, the research will explore how such sub-surface electronic devices can best be used to exert control over an associated plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Photocarrier Transfer across Monolayer MoS 2 –MoSe 2 Lateral Heterojunctions

In-plane heterojuctions formed from two monolayer semiconductors represent the finest control of electrons in condensed matter and have attracted significant interest. Various device studies have shown the effectiveness of such structures to control electronic processes, illustrating their potentials for electronic and optoelectronic applications. However, information about the physical mechanisms of charge carrier transfer across the junctions is still rare, mainly due to the lack of adequate experimental techniques. Here we show that transient absorption measurements with high spatial and temporal resolution can be used to directly monitor such transfer processes. We studied MoS 2 –MoSe 2 in-plane heterostructures fabricated by chemical vapor deposition and lithographic patterning followed by laser-generated vapor sulfurization. Transient absorption measurements in reflection geometry revealed evidence of exciton transfer from MoS 2 to MoSe 2 . By comparing the experimental data with a simulation, we extracted an exciton transfer velocity of 10 4 m s–1 . These results provide valuable information for understanding and controlling in-plane carrier transfer in two-dimensional lateral heterostructures for their electronic and optoelectronic applications.

two-dimensional material↗

Coherent Terahertz Polarization Control through Manipulation of Electron Trajectories

The dynamics of ionized electrons in a plasma can be controlled by synthetic optical fields composed of the fundamental and the second harmonic of femtosecond optical pulses with an arbitrary phase and polarization. We show here that the plasma-emitted half-cycle THz radiation directly reflects the two-dimensional trajectories of the electrons through polarization sensitive THz emission spectroscopy. As a result, we find that the THz polarization smoothly rotates through 2pi radians as the relative phase between the two pulses is adjusted, providing a new means of coherently controlling the polarization of light at THz frequencies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Positional control of plasmonic fields and electron emission

We report the positional control of plasmonic fields and electron emission in a continuous gap antenna structure of sub-micron size. We show experimentally that a nanoscale area of plasmon-enhanced electron emission can be motioned by changing the polarization of an exciting optical beam of 800 nm wavelength. Finite-difference calculations are presented to support the experiments and to show that the plasmon-enhanced electric field distribution of the antenna can be motioned precisely and predictively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase shifter for antenna beam steering

Wide band Array Antenna operates in Ku-band (10.7-12.7 GHz) frequency composed of N×N radiating elements. This antenna aims at the reception of television satellite signals. The goal of this research is to provide better possibility of electronic beam control instead of manual or mechanical control, and design compact and low cost phase shifters to be inserted in the feeding network of this antenna. The electronic control of the phase shifter will allow the control of beam steering. The emphasis of this project will be done at the beginning on the design of a good phase shifter in Ku band. The aim of this research is to define, simulate, release and measure a continuous phase shifter. Better reflection loss, low transmission loss, low Cost of array antennas, large range of phase-shifter, phase flatness and bandwidth will be achieved by providing better gain.

42 ENGINEERING↗

Resonant and random excitations on the proton beam in the Large Hadron Collider for active halo control with pulsed hollow electron lenses

We present the results of numerical simulations and experimental studies about the effects of resonant and random excitations on proton losses, emittances, and beam distributions in the Large Hadron Collider (LHC). In addition to shedding light on complex nonlinear effects, these studies are applied to the design of hollow electron lenses (HEL) for active beam halo control. In the High-Luminosity Large Hadron Collider (HL-LHC), a considerable amount of energy will be stored in the beam tails. To control and clean the beam halo, the installation of two hollow electron lenses, one per beam, is being considered. In standard electron-lens operation, a proton bunch sees the same electron current at every revolution. Pulsed electron beam operation (i.e., different currents for different turns) is also considered, because it can widen the range of achievable halo removal rates. For an axially symmetric electron beam, only protons in the halo are excited. If a residual field is present at the location of the beam core, these particles are exposed to time-dependent transverse kicks and to noise. We discuss the numerical simulations and the experiments conducted in 2016 and 2017 at injection energy in the LHC. The excitation patterns were generated by the transverse feedback and damping system, which acted as a flexible source of dipole kicks. Proton beam losses, emittances, and transverse distributions were recorded as a function of excitation patterns and strengths. The resonant excitations induced rich dynamical effects and nontrivial changes of the beam distributions, which, to our knowledge, have not previously been observed and studied in this detail. We conclude with a discussion of the tolerable and achievable residual fields and proposals for further studies.

43 PARTICLE ACCELERATORS↗

Collaborative Research: Fundamental Studies of Plasma Control Using Surface Embedded Electronic Devices

The research program was collaborative between the researchers at the University of Texas at Dallas and the University of Texas at Austin. The primary subject of this program was to investigate the possibility of active control of secondary electron emission (SEE) from surfaces in contact with plasmas and thereby actively control plasmas. Very few studies of ion-induced electron emission (IIEE) from semiconductors exist, and those that do exist primarily used high-energy ion beams in the experiments. Furthermore, those few studies took extreme measures to ensure that the measurements were performed on atomically clean surfaces because of the surface sensitivity of the IIEE process. Even a small exposure to air can change the IIEE yield significantly. In addition, much of the existing data for IIEE from semiconductors was obtained in the 1950s and ‘60s, when semiconductor materials were first being refined. As a result, nearly all of that data is for p-type Ge and Si. Before this investigation, experimental data on n-type materials was virtually non-existent. While the basic theory assumed that IIEE yields ought to be substantially independent of doping type and concentration, recent measurements of near atmospheric pressure plasmas and of breakdown suggested otherwise. These indirect measurements were made on surfaces that were not atomically clean and seemed to indicate that deep sub-surface changes to the bulk conduction band electron density could lead to substantial variations in the IIEE yield. Exactly in contradiction to the generally accepted theory. Insufficient direct data existed to settle the matter. We performed both experimental measurements and theoretical calculations of IIEE yields from both Si and Ge in order to help clarify whether or not conduction band electrons substantially change the IIEE yield. We used three wafers of each material to carry out the investigation: a heavily doped p-type, an intrinsic and a heavily doped n-type wafer. There was approximately a factor of 10 15 difference in the conduction band electron densities of the p-type and n-type Si wafers and a factor of 10 10 for Ge. We investigated semiconductor surfaces that were both chemically cleaned (not atomically clean) and sputter cleaned (much closer to atomically clean), since such measurements are more relevant to recent indirect measurements. In addition to IIEE measurements, X-ray and ultraviolet photoelectron spectroscopies (XPS and UPS) were utilized to better understand the results.

36 MATERIALS SCIENCE↗

Bending as a control knob for the electronic and optical properties of phosphorene nanoribbons

We have assessed mechanical bending as a powerful controlling tool for the electronic structure and optical properties of phosphorene nanoribbons. We use state-of-the-art density functional approximations in our work. The overall performance of the recently developed meta-generalized gradient approximation (meta-GGA) mTASK [Phys. Rev. Materials 5, 063803 (2021)] functional establishes the method as a useful alternative to the screened hybrid HSE06 for better band gaps of phosphorene nanoribbons. We present a detailed analysis to interpret the optical absorption of bent phosphorene nanoribbons using the GW-Bethe-Salpeter approximation. Finally, we demonstrate the important role of the unoccupied in-gap state and conclude that this in-gap state in armchair nanoribbons introduced by bending can significantly affect the properties of low-energy excitons and add some useful opportunities for applications in optoelectronic devices.

36 MATERIALS SCIENCE↗

Ordering of self-assembled 5-nm-diameter poly(dimethylsiloxane) nanodots with sub-10 nm pitch using ultra-narrow electron-beam-drawn guide lines and three-dimensional control

We demonstrate the possibility of forming long-range ordered self-assembled arrays of 5-nm-diameter nanodots with pitch of 10 × 7.5 nm{sup 2} using guide line templates and low molecular weight (MW) (4700–1200 g/mol) poly(styrene)-poly(dimethylsiloxane) (PS-PDMS) for application in ultrahigh density patterned magnetic recording media. We propose a three-dimensional control which involves control of the height of the guide lines, the thickness of the PS-PDMS films, and the gap between the guide lines in order to produce 5-nm-diameter, sub-10 nm pitched nanodots with long-range order along the guide lines. Adopting a 13-nm-thick PS-PDMS film and 14-nm-high resist guide lines, the 5-nm-diameter and 10 × 7.5 nm{sup 2}-pitched self-assembled nanodots were ordered in 4–7 dot arrays with long-range order. The experimental results demonstrate that the method is suitable for the production of patterned media with magnetic recording densities of 8.6 Tbit/in.{sup 2} using low MW PS-PDMS and slim guide lines.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Short-term effects of electronic and tobacco cigarettes on exhaled nitric oxide

The objective of this study was to compare the short-term respiratory effects due to the inhalation of electronic and conventional tobacco cigarette-generated mainstream aerosols through the measurement of the exhaled nitric oxide (eNO). To this purpose, twenty-five smokers were asked to smoke a conventional cigarette and to vape an electronic cigarette (with and without nicotine), and an electronic cigarette without liquid (control session). Electronic and tobacco cigarette mainstream aerosols were characterized in terms of total particle number concentrations and size distributions. On the basis of the measured total particle number concentrations and size distributions, the average particle doses deposited in alveolar and tracheobronchial regions of the lungs for a single 2-s puff were also estimated considering a subject performing resting (sitting) activity. Total particle number concentrations in the mainstream resulted equal to 3.5 ± 0.4 × 10{sup 9}, 5.1 ± 0.1 × 10{sup 9}, and 3.1 ± 0.6 × 10{sup 9} part. cm{sup −3} for electronic cigarettes without nicotine, with nicotine, and for conventional cigarettes, respectively. The corresponding alveolar doses for a resting subject were estimated equal to 3.8 × 10{sup 10}, 5.2 × 10{sup 10} and 2.3 × 10{sup 10} particles. The mean eNO variations measured after each smoking/vaping session were equal to 3.2 ppb, 2.7 ppb and 2.8 ppb for electronic cigarettes without nicotine, with nicotine, and for conventional cigarettes, respectively; whereas, negligible eNO changes were measured in the control session. Statistical tests performed on eNO data showed statistically significant differences between smoking/vaping sessions and the control session, thus confirming a similar effect on human airways whatever the cigarette smoked/vaped, the nicotine content, and the particle dose received. - Highlights: • Electronic cigarettes (with and without nicotine) mainstream aerosols were analyzed; • Particle number concentrations and size distributions were measured; • Nitric oxide exhaled by smokers before and after smoking/vaping was evaluated; • Alveolar and tracheobronchial doses of particle for a single puff were estimated; • Comparisons with conventional cigarette were made.

60 APPLIED LIFE SCIENCES↗

Controllable high-quality electron beam generation by phase slippage effect in layered targets

The bubble structure generated by laser-plasma interactions changes in size depending on the local plasma density. The self-injection electrons' position with respect to wakefield can be controlled by tailoring the longitudinal plasma density. A regime to enhance the energy of the wakefield accelerated electrons and to improve the beam quality is proposed and achieved using layered plasmas with increasing densities. Both the wakefield size and the electron bunch duration are significantly contracted in this regime. The electrons remain in the strong acceleration phase of the wakefield, while their energy spread decreases because of their tight spatial distribution. An electron beam of 0.5 GeV with less than 1% energy spread is obtained through 2.5D particle-in-cell simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The effect of secondary electrons on the separate control of ion energy and flux in dual-frequency capacitively coupled radio frequency discharges

Dual-frequency capacitive discharges are used to separately control the mean ion energy, {epsilon}{sub ion}, and flux, {Gamma}{sub ion}, at the electrodes. We study the effect of secondary electrons on this separate control in argon discharges driven at 2+27 MHz at different pressures using Particle in Cell simulations. For secondary yield {gamma}{approx_equal}0, {Gamma}{sub ion} decreases as a function of the low frequency voltage amplitude due to the frequency coupling, while it increases at high {gamma} due to the effective multiplication of secondary electrons inside the sheaths. Therefore, separate control is strongly limited. {epsilon}{sub ion} increases with {gamma}, which might allow an in situ determination of {gamma}-coefficients.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Control of the hot electrons produced by laser interaction with nanolayered target

Hot electrons generated by short-pulse-laser interaction with nanolayered target (NT) are investigated using two-dimensional particle-in-cell simulation. Compared to the planar target, the NT leads to more efficient conversion of laser energy to the kinetic energy of the accelerated electrons. However, the energy absorption by the NT decreases at both too-low and too-high laser intensities. At lower laser intensities it is because of the weaker electric and magnetic fields generated by the hot-electron jets and smaller relativistic skin depth. At higher laser intensities it is because of the damage or destruction of the layered structure by the laser field. On the other hand, the dependence of the conversion efficiency and hot-electron number on the duration of the (short) laser pulse and the nanolayer length is weak. Control of the hot-electron characteristics by tailoring the parameters of the laser and the NT is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗