Search NASA⌕ Search

SEARCH · Search NASA

Results for “coordination complexes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Navier-Stokes simulation of the crossflow instability in swept-wing flows

The computational modeling of the transition process characteristic of flows over swept wings are described. Specifically, the crossflow instability and crossflow/T-S wave interactions are analyzed through the numerical solution of the full three-dimensional Navier-Stokes equations including unsteadiness, curvature, and sweep. This approach is chosen because of the complexity of the problem and because it appears that linear stability theory is insufficient to explain the discrepancies between different experiments and between theory and experiments. The leading edge region of a swept wing is considered in a three-dimensional spatial simulation with random disturbances as the initial conditions. The work has been closely coordinated with the experimental program of Professor William Saric, examining the same problem. Comparisons with NASA flight test data and the experiments at Arizona State University were a necessary and an important integral part of this work.

Reed, Helen L.↗
NASA NTRS1996

Synthesis, Structure, and Characterization of Cu4S10(4-methylpyridine)4

The title compound, Cu4S10(4-methylpyridine)(sub 4) (dot) 4-methylpyridine was prepared by three different reactions: the oxidation of copper powder by sulfur and the reaction of copper (I) sulfide (or CuBr (dot) SMe2) with excess sulfur, both in the coordinating solvent, 4-methylpyridine. Red crystals of the compound obtained by layering with hexanes were subjected to single crystal X-ray diffraction. The structure was refined to R = 0.026 and R(sub w) = 0.036 in a space group P1bar (No. 2), with Z = 2, a = 13.983 (2) A, b = 15.384 (2) A, c = 9.660 (1) A, alpha = 93.87 (1)deg., beta = 93.38 (1)deg., gamma = 99.78 (1)deg., V = 2037.9 (9) A(exp 3). The compound has approximate S(sub 4) symmetry and consists of two pentasulfide chains linking four Cu(I) ions, each with a corrdinating 2-methylpyridine. The infrared spectrum was dominated by absorption due to coordinated 4-methylpyridine with several low-energy peaks attributable to S-S stretches, which were also observed by Raman spectroscopy. A featureless electronic absorption spectrum yielded a single peak in the near ultraviolet upon computer enhancement (lambda = 334 nm, epsilon = 10,000), most likely an intraligand transition. Cyclic voltammetry indicates that the polysulfide complex undergoes irrversible oxidation and reduction at +0.04 and -0.34 V vs. SCE, respectively, at 298 K in 4-methylpyridine when swept at 20 mV/sec. The electrochemical behavior was unvaried even at sweep rates as high as 100 V/sec.

Hepp, Aloysius F.↗
NASA NTRS1994

A full-coordinate model of the polymerase domain of HIV-1 reverse transcriptase and its interaction with a nucleic acid substrate

We present a full-coordinate model of residues 1-319 of the polymerase domain of HIV-I reverse transcriptase. This model was constructed from the x-ray crystallographic structure of Jacobo-Molina et al. (Jacobo-Molina et al., P.N.A.S. USA 90, 6320-6324 (1993)) which is currently available to the degree of C-coordinates. The backbone and side-chain atoms were constructed using the MAXSPROUT suite of programs (L. Holm and C. Sander, J. Mol. Biol. 218, 183-194 (1991)) and refined through molecular modeling. A seven base pair A-form dsDNA was positioned in the nucleic acid binding cleft to represent the template-primer complex. The orientation of the template-primer complex in the nucleic acid binding cleft was guided by the positions of phosphorus atoms in the crystal structure.

Non-NASA Center↗
NASA NTRSDate not supplied

Overview of NASA Gateway Lunar Dust Mitigation and Contamination Modeling and Analysis

The planned NASA Artemis campaign has several lunar surface missions in which the NASA Gateway is the waypoint between lunar orbit and the lunar surface for Human Lander System (HLS). Each of these missions is an opportunity for lunar dust to be introduced into the Gateway environment, post surface mission, potentially causing end of life (EOL) performance degradation due to lunar dust contamination of sensitive hardware and systems on the exterior of Gateway and Visiting Vehicles. The Gateway Systems Engineering and Integration (SE&I) and Induced Environments teams are addressing the challenge of lunar dust with a two-pronged approach. Characterization of the lunar dust induced environment around Gateway and contamination risk is accomplished with a comprehensive physics-based framework, the Gateway On-orbit Lunar Dust Modeling and Analysis Program (GOLDMAP), which is currently in development. Analysis results from GOLDMAP define Gateway-level induced environments requirements and are flowed to elements and subsystems. In parallel, a dust mitigation strategy is being developed with a focus on lunar dust protection, dust mitigation technologies, mitigation and testing guidance, and cross-program coordination and is informed by outputs from GOLDMAP analyses. Activities supporting both components include hardware susceptibility assessments and testing, and scientific experiments on lunar regolith.

Gateway↗
NASA NTRS2000

NPSS on NASA's IPG: Using CORBA and Globus to Coordinate Multidisciplinary Aeroscience Applications

Within NASA's High Performance Computing and Communication (HPCC) program, the NASA Glenn Research Center is developing an environment for the analysis/design of aircraft engines called the Numerical Propulsion System Simulation (NPSS). The vision for NPSS is to create a "numerical test cell" enabling full engine simulations overnight on cost-effective computing platforms. To this end, NPSS integrates multiple disciplines such as aerodynamics, structures, and heat transfer and supports "numerical zooming" between O-dimensional to 1-, 2-, and 3-dimensional component engine codes. In order to facilitate the timely and cost-effective capture of complex physical processes, NPSS uses object-oriented technologies such as C++ objects to encapsulate individual engine components and CORBA ORBs for object communication and deployment across heterogeneous computing platforms. Recently, the HPCC program has initiated a concept called the Information Power Grid (IPG), a virtual computing environment that integrates computers and other resources at different sites. IPG implements a range of Grid services such as resource discovery, scheduling, security, instrumentation, and data access, many of which are provided by the Globus toolkit. IPG facilities have the potential to benefit NPSS considerably. For example, NPSS should in principle be able to use Grid services to discover dynamically and then co-schedule the resources required for a particular engine simulation, rather than relying on manual placement of ORBs as at present. Grid services can also be used to initiate simulation components on parallel computers (MPPs) and to address inter-site security issues that currently hinder the coupling of components across multiple sites. These considerations led NASA Glenn and Globus project personnel to formulate a collaborative project designed to evaluate whether and how benefits such as those just listed can be achieved in practice. This project involves firstly development of the basic techniques required to achieve co-existence of commodity object technologies and Grid technologies; and secondly the evaluation of these techniques in the context of NPSS-oriented challenge problems. The work on basic techniques seeks to understand how "commodity" technologies (CORBA, DCOM, Excel, etc.) can be used in concert with specialized "Grid" technologies (for security, MPP scheduling, etc.). In principle, this coordinated use should be straightforward because of the Globus and IPG philosophy of providing low-level Grid mechanisms that can be used to implement a wide variety of application-level programming models. (Globus technologies have previously been used to implement Grid-enabled message-passing libraries, collaborative environments, and parameter study tools, among others.) Results obtained to date are encouraging: we have successfully demonstrated a CORBA to Globus resource manager gateway that allows the use of CORBA RPCs to control submission and execution of programs on workstations and MPPs; a gateway from the CORBA Trader service to the Grid information service; and a preliminary integration of CORBA and Grid security mechanisms. The two challenge problems that we consider are the following: 1) Desktop-controlled parameter study. Here, an Excel spreadsheet is used to define and control a CFD parameter study, via a CORBA interface to a high throughput broker that runs individual cases on different IPG resources. 2) Aviation safety. Here, about 100 near real time jobs running NPSS need to be submitted, run and data returned in near real time. Evaluation will address such issues as time to port, execution time, potential scalability of simulation, and reliability of resources. The full paper will present the following information: 1. A detailed analysis of the requirements that NPSS applications place on IPG. 2. A description of the techniques used to meet these requirements via the coordinated use of CORBA and Globus. 3. A description of results obtained to date in the first two challenge problems.

Lopez, Isaac↗
NASA NTRS1988

A mathematical model for spatial orientation from pictorial perspective displays

A previously formulated mathematical model, describing how observers reconstruct three-dimensional spatial layouts from perspective projections, has been extended to more complex situations. The model assumes that the observer has a priori knowledge of certain characteristics of the viewed objects, like size, shape, or parallelism or perpendicularity of lines or planes. These assumptions are used in a three-dimensional process to reconstruct a spatial layout that `best matches' the perceived lines of sight to the object coordinates. Sources of errors and biases in this process are specified and their effects on model outputs are discussed. An experiment, in which eight subjects judged the relative direction of one object with respect to another, has been conducted to validate the model. The model has been found to generally reproduce the systematic trends of the experimental results and also has provided an analytical explanation for them. The mathematical model is expected to be a useful tool in analyzing and developing pictorial perspective flight displays.

Grunwald, Arthur J.↗
NASA NTRS2016

Charlotte - EDC Evaluation and Demonstration (CEED) Human-in-the-Loop Results Briefing to ATD-2 FAA Partners

The Charlotte EDC Evaluation and Demonstration (CEED) was the first Human-In-The-Loop experiment under the Air Traffic Management Technology Demonstration-2 (ATD-2) project. The purpose of the study was fourfold: 1) to establish a simulation environment (Charlotte) for airspace operations for ATD-2 technology, 2) to simulate current-day departures and arrival operations, 3) to assess the impact of current Traffic Management Initiatives (TMI) on Charlotte (CLT) departure flows and en route operations in Washington (ZDC) and Atlanta Centers (ZTL), and 4) to assess the impact of departure takeoff time compliance on airspace operations. The experimental design compared 3 TMIs and 2 compliance levels. Fourteen FAA retired controllers participated in the simulation. In addition, two Traffic Management Coordinators from ZTL and ZDC managed traffic flows. Surface and airborne delays, control efficiency, throughput, realism, workload, and acceptability were assessed and will be compared across the experimental conditions. Participants rated the simulation as very realistic. Results indicate that different TMIs have different impacts on surface and airspace delay. Departure compliance indicates partial benefits to sector complexity and controller workload. This simulation will provide an initial assessment of the tactical scheduling problems that the ATD-2 technology will address in the near term.

airspace technology demonstration 2↗
NASA NTRS1992

Wall functions for the kappa-epsilon turbulence model in generalized nonorthogonal curvilinear coordinates

A k-epsilon turbulence model suitable for compressible flow, including the new wall function formulation, has been incorporated into an existing compressible Reynolds-averaged Navier-Stokes code, F3D. The low Reynolds number k-epsilon model of Chien (1982) was added for comparison with the present method. A number of features were added to the F3D code including improved far-field boundary conditions and viscous terms in the streamwise direction. A series of computations of increasing complexity was run to test the effectiveness of the new formulation. Flow over a flat plate was computed by using both orthogonal and nonorthogonal grids, and the friction coefficients and velocity profiles compared with a semi-empirical equation. Flow over a body of revolution at zero angle of attack was then computed to test the method's ability to handle flow over a curved surface. Friction coefficients and velocity profiles were compared to test data. All models gave good results on a relatively fine grid, but only the wall function formulation was effective with coarser grids. Finally, in order to demonstrate the method's ability to handle complex flow fields, separated flow over a prolate spheroid at angle of attack was computed, and results were compared to test data. The results were also compared to a k-epsilon model by Kim and Patel (1991), in which one equation model patched in at the wall was employed. Both models gave reasonable solutions, but improvement is required for accurate prediction of friction coefficients in the separated regions.

Sondak, D. L.↗
NASA NTRS1962

Rendezvous Guidance Technology

The literature on rendezvous guidance technology is reviewed and a bibliography of about 160 documents is presented. The importance of the proper selection of the ascent trajectory and of the orbit for a manned space station or an orbiting launch complex is emphasized. The way the launch delay problem affects the selection of the ascent trajectory and the target orbit is discussed. A specific ascent trajectory and an orbit for a manned space station or an orbiting launch complex is recommended on the premise that launch delay problems will continue to outweigh most of the other orbit selection criteria. A new method for determining the velocity corrections required for mid-course guidance is proposed . The proposed methods consist of an "exact-numerical" solution of the relative equations of motion in the "Shell-coordinate system." The proposed "exact-numerical" method extends the applicability of the mid- course equations to a much greater range than that of the currently available linear methods .

Trajectory↗
NASA NTRS2004

A Stigmergic Cooperative Multi-Robot Control Architecture

In nature, there are numerous examples of complex architectures constructed by relatively simple insects, such as termites and wasps, which cooperatively assemble their nests. A prototype cooperative multi-robot control architecture which may be suitable for the eventual construction of large space structures has been developed which emulates this biological model. Actions of each of the autonomous robotic construction agents are only indirectly coordinated, thus mimicking the distributed construction processes of various social insects. The robotic construction agents perform their primary duties stigmergically, i.e., without direct inter-agent communication and without a preprogrammed global blueprint of the final design. Communication and coordination between individual agents occurs indirectly through the sensed modifications that each agent makes to the structure. The global stigmergic building algorithm prototyped during the initial research assumes that the robotic builders only perceive the current state of the structure under construction. Simulation studies have established that an idealized form of the proposed architecture was indeed capable of producing representative large space structures with autonomous robots. This paper will explore the construction simulations in order to illustrate the multi-robot control architecture.

Howsman, Thomas G.↗
NASA NTRS2017

SpaRibs Geometry Parameterization for Wings with Multiple Sections using Single Design

The SpaRibs topology of an aircraft wing has a significant effect on its structural behavior and stability as well as the flutter performance. The development of additive manufacturing techniques like Electron Beam Free Form Fabrication (EBF3) has made it feasible to manufacture aircraft wings with curvilinear spars, ribs (SpaRibs) and stiffeners. In this article a new global-local optimization framework for wing with multiple sections using curvilinear SpaRibs is described. A single design space is used to parameterize the SpaRibs geometry. This method has been implemented using MSC-PATRAN to create a broad range of SpaRibs topologies using limited number of parameters. It ensures C0 and C1 continuities in SpaRibs geometry at the junction of two wing sections with airfoil thickness gradient discontinuity as well as mesh continuity between all structural components. This method is advantageous in complex multi-disciplinary optimization due to its potential to reduce the number of design variables. For the global-local optimization the local panels are generated by an algorithm which is totally based on a set algebra on the connectivity matrix data. The great advantage of this method is that it is completely independent of the coordinates of the nodes of the finite element model. It is also independent of the order in which the elements are distributed in the FEM. The code is verified by optimizing of the CRM Baseline model at trim condition at Mach number equal to 0.85 for five different angle of attack (-2deg, 0deg,2deg,4deg and 6deg). The final weight of the wing is 19,090.61 lb. This value is comparable to that obtained by Qiang et al. 6 (19,269 lb).

wing sections↗
NASA NTRS2022

Robotics Verification and Validation Strategies for Perseverance Rover Sampling and Caching

The Mars 2020 Sampling and Caching Subsystem(SCS) is the most complex robotic system ever fielded on a MarsRover. It includes a 5 degree-of-freedom Robotic Arm, coringdrill, gas Dust Removal Tool, interfaces for two turret-mountedinstruments, and an Adaptive Caching Assembly (ACA). TheACA is itself a complex robotic system, containing hardware tosupport docking and bit exchange, a 3 degree-of-freedomSample Handling Assembly for manipulating sample tubes,storage for several drill bits and sample tubes, and mechanismsto support observing and sealing samples collected by the drill.To successfully verify and validate the SCS hardware andsoftware and its integration with the Mars 2020 flight systemseveral key strategies were employed.The SCS Verification and Validation (V&V) program utilizedmultiple test venues with tiered levels of fidelity. These includedsimulation and visualization software environments, low fidelitydevelopment testbeds, testbeds with high fidelity SCS hardwareand commercial off-the shelf avionics, integrated systemtestbeds with flight-like avionics, and environmental testbedscapable of simulating Martian surface temperature andpressure. Multiple units of each SCS hardware componentmoved fluidly between test venues to accomplish myriadstandalone and coordinated test objectives. Test preparationand executions were performed by a diverse team of engineerswith training and technical ownership tailored for individualexperience and role. Despite significant differences between testvenues, the SCS V&V team established efficient and consistentprocesses and tools for procedure development, test execution,and data review that enabled personnel, as well as technicalproducts such as sequences and parameter configurations, toflow between venues effectively. A series of benchmark testsprovided evidence of performance consistency as elements weretransferred between venues and as system capability evolved.This paper provides an overview of the SCS V&V program andexplores several overarching strategies that enabled successfuloperation in the face of unprecedented complexity. Keyoutcomes of the SCS validation effort are summarized, alongwith lessons learned and beneficial integrations of validationtool and process innovations into Mars surface operations.

Brooks, Sawyer↗
NASA NTRS1980

Development of a computer program data base of a navigation aid environment for simulated IFR flight and landing studies

A general aviation single pilot instrument flight rule simulation capability was developed. Problems experienced by single pilots flying in IFR conditions were investigated. The simulation required a three dimensional spatial navaid environment of a flight navigational area. A computer simulation of all the navigational aids plus 12 selected airports located in the Washington/Norfolk area was developed. All programmed locations in the list were referenced to a Cartesian coordinate system with the origin located at a specified airport's reference point. All navigational aids with their associated frequencies, call letters, locations, and orientations plus runways and true headings are included in the data base. The simulation included a TV displayed out-the-window visual scene of country and suburban terrain and a scaled model runway complex. Any of the programmed runways, with all its associated navaids, can be referenced to a runway on the airport in this visual scene. This allows a simulation of a full mission scenario including breakout and landing.

Bergeron, H. P.↗
NASA NTRS1989

Survey observations of emission-line stars in the Orion region

Survey observations were conducted for H alpha-emission stars in the Orion region using the Kiso Schmidt telescope and partly the CTIO Curtis Schmidt telescope. In the area of about 25 square degrees, a total of 236 H alpha-emission objects, mostly supposed to be T Tau type stars, have been detected among which 155 are new ones including 6 non-stellar objects. Celestial coordinates and V-magnitude are measured for the detected objects. Eye estimation of the H alpha-emission intensity is also made at three epochs in a time span of about two years, where notable variation of H alpha intensity was found in 68 out of 236 objects. Besides a remarkable concentration along the northern dark cloud complex, a loose concentration is noticed near the Orion Belt region, fairly well coinciding with the distribution of the Orion OBIb association members. A comparison with the Av-map is also made to see the relationship between the distribution of emission-line objects and that of interstellar dust.

Wiramihardja, Suhardja D.↗
NASA NTRS1985

Numerical analysis of flow non-uniformity in the hot gas manifold of the Space Shuttle main engine

Three-dimensional viscous flow in a conceptual hot gas manifold (HGM) for the Space Shuttle Main Engine High Pressure Fuel Turbopump (SSME HPFTP) was numerically analyzed. A finite difference scheme was used to solve the Navier-Stokes equations. The exact geometry of the SSME HGM was modeled using boundary fitted curvilinear coordinates and the General Interpolants Method (GIM) code. Slight compressibility of the subsonic flow was modeled using a linearized equation of state with artificial compressibility. A time relaxation method was used to obtain a steady state solution. The feasibility and potential usefulness of computational methods in assisting the design of SSME components which involves the flow of fluids within complex geometrical shapes is demonstrated.

Thoenes, J.↗
NASA NTRS1985

A three-dimensional incompressible flow simulation method and its application to the Space Shuttle main engine. II Turbulent flow

An implicit finite difference code cast in general curvilinear coordinates is further developed for three-dimensional incompressible turbulent flows. The code is based on the method of pseudocompressibility and utilizes the Beam and Warming implicit approximate factorization algorithm to achieve computational efficiency. A multiple-zone method is further extended to include composite-grids to overcome the excessive computer memory required for solving turbulent flows in complex three-dimensional geometries. A simple turbulence model is proposed for internal flows. The code is being used for the Space Shuttle Main Engine (SSME) internal flow analyses.

Chang, J. L. C.↗
NASA NTRS1996

Immobile Robots: AI in the New Millennium

A new generation of sensor rich, massively distributed, autonomous systems are being developed that have the potential for profound social, environmental, and economic change. These include networked building energy systems, autonomous space probes, chemical plant control systems, satellite constellations for remote ecosystem monitoring, power grids, biosphere-like life support systems, and reconfigurable traffic systems, to highlight but a few. To achieve high performance, these immobile robots (or immobots) will need to develop sophisticated regulatory and immune systems that accurately and robustly control their complex internal functions. To accomplish this, immobots will exploit a vast nervous system of sensors to model themselves and their environment on a grand scale. They will use these models to dramatically reconfigure themselves in order to survive decades of autonomous operations. Achieving these large scale modeling and configuration tasks will require a tight coupling between the higher level coordination function provided by symbolic reasoning, and the lower level autonomic processes of adaptive estimation and control. To be economically viable they will need to be programmable purely through high level compositional models. Self modeling and self configuration, coordinating autonomic functions through symbolic reasoning, and compositional, model-based programming are the three key elements of a model-based autonomous systems architecture that is taking us into the New Millennium.

Williams, Brian C.↗
NASA NTRS2004

A Survey of Collectives

Due to the increasing sophistication and miniaturization of computational components, complex, distributed systems of interacting agents are becoming ubiquitous. Such systems, where each agent aims to optimize its own performance, but where there is a well-defined set of system-level performance criteria, are called collectives. The fundamental problem in analyzing/designing such systems is in determining how the combined actions of self-interested agents leads to 'coordinated' behavior on a iarge scale. Examples of artificial systems which exhibit such behavior include packet routing across a data network, control of an array of communication satellites, coordination of multiple deployables, and dynamic job scheduling across a distributed computer grid. Examples of natural systems include ecosystems, economies, and the organelles within a living cell. No current scientific discipline provides a thorough understanding of the relation between the structure of collectives and how well they meet their overall performance criteria. Although still very young, research on collectives has resulted in successes both in understanding and designing such systems. It is eqected that as it matures and draws upon other disciplines related to collectives, this field will greatly expand the range of computationally addressable tasks. Moreover, in addition to drawing on them, such a fully developed field of collective intelligence may provide insight into already established scientific fields, such as mechanism design, economics, game theory, and population biology. This chapter provides a survey to the emerging science of collectives.

Tumer, Kagan↗