Search NASA⌕ Search

SEARCH · Search NASA

Results for “depth profiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Rapid thermal and swift heavy ion induced annealing of Co ion implanted GaN films

Thin epitaxial GaN films grown on 6H-SiC(0001) substrates were implanted with 180 keV Co ions at three different fluences. As-implanted samples were characterized with secondary ion mass spectrometry and Rutherford backscattering spectrometry to obtain the Co depth profiles and the maximum Co concentrations. As-implanted samples were annealed applying two different techniques: rapid thermal annealing and annealing by swift heavy ion irradiation. Rapid thermal annealing was done at two temperatures: 1150 deg. C for 20 s and 700 deg. C for 5 min. 200 MeV Ag ions at two fluences were used for annealing by irradiation. Crystalline structure of the pristine, as-implanted, and annealed samples was investigated using x-ray diffraction, and the results were compared. Improvement of the crystalline quality was observed for rapid thermal annealed samples at the higher annealing temperature as confirmed with rocking curve measurements. The results indicate the presence of Co clusters in these annealed samples. Swift heavy ion irradiation with the parameters chosen for this study did not lead to a significant annealing.

36 MATERIALS SCIENCE↗

Superior Nanoscale Passive Oxide Layers Synthesized Under Photon Irradiation for Environmental Protection

We report on synthesis and functional properties of ultra-thin oxide layers synthesized on metal surfaces by room temperature photon irradiation. We show that the impedance of a passive aluminum oxide film synthesized under ultraviolet photon irradiation is an order of magnitude larger than that of native oxide in a 0.5 M NaCl solution. Further, the structure and impedance of existing native oxide layers can be dramatically improved by minutes-long exposure to photon-irradiation. Depth profiling studies with X-ray photoelectron spectroscopy shows that chlorine uptake in UV-synthesized oxides, compared to that of native oxides, is reduced which can contribute to the improvement in corrosion resistance. The results are of significance to synthesis of ultra-thin passive layers on metal and alloy structures for environmental protection.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Thermal stability of nitrogen in nitrided HfSiO{sub 2}/SiO{sub 2}/Si(001) ultrathin films

We report on the stability under rapid thermal annealing (RTA) of the nitrogen depth profile in nitrided HfO{sub 2}/SiO{sub 2}/Si[001] and Hf{sub 0.8}Si{sub 0.2}O{sub 2}/SiO{sub 2}/Si[001] dielectric stacks. High resolution x-ray photoelectron spectroscopy (XPS) data indicate that the chemical component of nitrogen associated with the hafnium layer (binding energy of 396.7 eV) decreases considerably upon RTA. This was accompanied by a corresponding increase in the nitrogen component associated with silicon oxynitride (binding energy of 397.5 eV). A self-consistent analysis of the angle resolved XPS data indicated that the total amount of nitrogen in the film remains constant, suggesting that RTA causes an exchange of nitrogen between the hafnium and silicon layers. Transmission electron microscopy images show crystallization of the hafnium layer upon RTA, which is consistent with the loss of nitrogen. Data from time of flight secondary ion mass spectroscopy were consistent with the change in the nitrogen profile caused by RTA.

36 MATERIALS SCIENCE↗

Composition Dependence of Schottky Barrier Heights and Bandgap Energies of GaNxAs1-x Synthesized by Ion Implantation and Pulsed-Laser Melting

We present a systematic investigation on the band structure of the GaN{sub x}As{sub 1-x} alloys synthesized using nitrogen ion implantation followed by pulsed-laser melting and rapid thermal annealing. The evolution of the nitrogen-concentration depth profile is consistent with liquid-phase diffusion, solute trapping at the rapidly moving solidification front, and surface evaporation. The reduction of the Schottky barrier height of the {Gamma}-like threshold at nitrogen composition up to x = 0.016 is studied by ballistic electron emission microscopy (BEEM) and determined quantitatively using the second voltage derivative BEEM spectra to be -191 {+-} 63 meV per x = 0.01, which is close to the corresponding slope for samples grown by low-temperature molecular beam epitaxy. This slope is also consistent with the bandgap narrowing measured on the same samples by photomodulated reflectance and is consistent with the band anticrossing model for the splitting of the conduction band in the GaN{sub x}As{sub 1-x} alloys. Lithographically patterned GaN{sub x}As{sub 1-x} dots are imaged by BEEM. Analysis of BEEM spectra of the locally confined dots indicates an alloying-induced decrease in the Schottky barrier height of four times the thermal energy at room temperature.

14 SOLAR ENERGY↗

Plasma Immersion Ion Implantation with Solid Targets for Space and Aerospace Applications

This paper describes successful results obtained by a new type of plasma source, named as Vaporization of Solid Targets (VAST), for treatment of materials for space and aerospace applications, by means of plasma immersion ion implantation and deposition (PIII and D). Here, the solid element is vaporized in a high pressure glow discharge, being further ionized and implanted/deposited in a low pressure cycle, with the aid of an extra electrode. First experiments in VAST were run using lithium as the solid target. Samples of silicon and aluminum alloy (2024) were immersed into highly ionized lithium plasma, whose density was measured by a double Langmuir probe. Measurements performed with scanning electron microscopy (SEM) showed clear modification of the cross-sectioned treated silicon samples. X-ray photoelectron spectroscopy (XPS) analysis revealed that lithium was implanted/deposited into/onto the surface of the silicon. Implantation depth profiles may vary according to the condition of operation of VAST. One direct application of this treatment concerns the protection against radiation damage for silicon solar cells. For the case of the aluminum alloy, X-ray diffraction analysis indicated the appearance of prominent new peaks. Surface modification of A12024 by lithium implantation/deposition can lower the coefficient of friction and improve the resistance to fatigue of this alloy. Recently, cadmium was vaporized and ionized in VAST. The main benefit of this element is associated with the improvement of corrosion resistance of metallic substrates. Besides lithium and cadmium, VAST allows to performing PIII and D with other species, leading to the modification of the near-surface of materials for distinct purposes, including applications in the space and aerospace areas.

36 MATERIALS SCIENCE↗

Performance and reliability improvement of HfSiON gate dielectrics using chlorine plasma treatment

The effects of chlorine plasma treatment on HfSiON gate dielectrics were investigated with respect to device performance and reliability characteristics. The chlorine plasma treatment was performed on atomic layer deposited HfSiON films to remove the residual carbon content. The optimal chlorine plasma treatment is shown to lower gate leakage current density without increasing equivalent oxide thickness of the gate stack. Secondary ion mass spectroscopy depth profiling showed that the carbon residue in HfSiON was reduced by the chlorine plasma treatment. It is demonstrated that an optimized chlorine plasma treatment improves the transistor I{sub on}-I{sub off} characteristics and reduces negative-bias temperature instability.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Producing metastable nanophase with sharp interface by means of focused ion beam irradiation

Amorphous carbon/nickel double layers were irradiated by 30 keV Ga{sup +} ions via focused ion beam. The effect of irradiation on the concentration distribution of all constituents was studied by Auger electron spectroscopy depth profiling and cross sectional transmission electron microscopy, while the morphology change of the sample was determined by atomic force microscopy. The Ga{sup +} ion irradiation results in the formation of metastable Ni{sub 3}C layer with a uniform thickness. The C/Ni{sub 3}C and Ni{sub 3}C/Ni interfaces were found to be sharp up to a fluence of 200 Ga{sup +} ions/nm{sup 2}.

36 MATERIALS SCIENCE↗

Evaluation of GaN substrates grown in supercritical basic ammonia

GaN crystals grown by the basic ammonothermal method were investigated for their use as substrates for device regrowth. X-ray diffraction analysis indicated that the substrates contained multiple grains while secondary ion mass spectroscopy (SIMS) revealed a high concentration of hydrogen, oxygen, and sodium. Despite these drawbacks, the emission from the light emitting diode structures grown by metal organic chemical vapor deposition on both the c-plane and m-plane epitaxial wafers was demonstrated. The SIMS depth profiles showed that the diffusion of the alkali metal from the substrate into the epitaxial film was small, especially in the m-direction.

36 MATERIALS SCIENCE↗

Precision Measurements of the 278 keV {sup 14}N(p,{gamma}) and the 151 keV {sup 18}O(p,{alpha}) Resonance Parameters

In thin film technology, analytical methods for monitoring the deposition of oxide and nitride coatings and the effects of corrosive, laser and ion-beam treatments have attracted considerable attention. For depth-profiling the concentrations of light isotopes, resonant nuclear reaction analysis is an excellent non-destructive ion-beam analytical tool. We report here on precision measurements of the 278 keV {sup 14}N(p,{gamma}) and the 151 keV {sup 18}O(p,{alpha}) resonances using the high-resolution proton beam of the Goettingen IONAS accelerator. The deduced resonance energies E{sub R} and total widths {gamma}(in the laboratory system) are E{sub R} = 277.60(27) keV and {gamma} = 1115(33) eV for the {sup 14}N(p,{gamma}) resonance, and E{sub R} = 150.97(26) keV and {gamma} = 178(35) eV for the {sup 18}O(p,{alpha}) resonance. These values are significantly more precise than the ones quoted in the literature.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Gold-implanted shallow conducting layers in polymethylmethacrylate

PMMA (polymethylmethacrylate) was ion implanted with gold at very low energy and over a range of different doses using a filtered cathodic arc metal plasma system. A nanometer scale conducting layer was formed, fully buried below the polymer surface at low implantation dose, and evolving to include a gold surface layer as the dose was increased. Depth profiles of the implanted material were calculated using the Dynamic TRIM computer simulation program. The electrical conductivity of the gold-implanted PMMA was measured in situ as a function of dose. Samples formed at a number of different doses were subsequently characterized by Rutherford backscattering spectrometry, and test patterns were formed on the polymer by electron beam lithography. Lithographic patterns were imaged by atomic force microscopy and demonstrated that the contrast properties of the lithography were well maintained in the surface-modified PMMA.

36 MATERIALS SCIENCE↗

Quantitative characterization of solid state phases by secondary neutral mass spectrometry

The quantitative determination of chemical solid phases by secondary neutral mass spectrometry (SNMS) based on the quantitative character of this technique is described and demonstrated for several thin film structures. The intermetallic phases in a Ni-Zn coating on Fe are shown to be achieved directly from the concentration ratios determined by SNMS. When correlating the local elemental concentration tupels with the corresponding phase fractions by a matrix equation, the determination of chemical solid phase depth profiles becomes possible. This is exemplified by the detection of temperature induced chemical phases in Ni and Ti/Si films on SiC substrates.

36 MATERIALS SCIENCE↗

Accelerator-Based Laboratory Activities at USNA

The Naval Academy Tandem Accelerator Laboratory is dedicated to providing educational experiences for undergraduates. Students gain experience in accelerator operations, detector and data acquisition systems, nuclear structure and reaction mechanisms, and materials analysis techniques. Suggestions for managing the laboratory sessions are given. Examples introducing Coulomb excitation, resonance reactions, and depth profiling are described.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Influence of sputter rate and crystal orientation on the distribution of carbon in polycrystalline copper surfaces treated by plasma immersion ion implantation

The sputter rate influences the resulting thickness of the carbon containing layer within a surface that was treated by plasma immersion ion implantation. Choosing a polycrystalline substrate with rather large crystals and a material with an inherent high sputter rate, inhomogeneous distributions of carbon over the substrate area due to different thicknesses of the incorporated carbon can be detected. A correlation of three factors namely the carbon x-ray intensity in electron probe microanalysis, the thickness of the carbon layer, and the sputter rate in depth profiling measurements via secondary ion mass spectrometry can be shown. Essential for these factors is the crystal orientation that is visualized by mapping via electron backscatter diffraction. The differences in carbon content due to the orientation are most likely one of the reasons that the adhesion of diamond-like carbon films on copper does not improve with an interlayer of implanted carbon.

36 MATERIALS SCIENCE↗

The effect of oxygen during irradiation of silicon with low energy Cs{sup +} ions

The effect of oxygen flooding during ultralow energy SIMS depth profiling of silicon with Cs{sup +} primary ions is presented. New experimental data show the effective sputtering yield of silicon in the presence of oxygen, as well as the energy distribution of the secondary Si{sup -} ions. It is found that the component sputtering yield of Si is very sensitive to minute amounts of oxygen in the proximity of the sputtered surface. At these very low flooding pressures (in the 10{sup -9}-10{sup -8} mbar range), one cannot account for a full oxidation in the time frame of a typical measurement; it is concluded that in this particular case, which is technologically very relevant, small traces of oxygen will change the desorption characteristics of cesium as well as silicon. It shows that oxygen that is adsorbed to the silicon surface provides an attachment site for impinging cesium ions and thereby increases the retention capacity of cesium tremendously. Also, oxygen changes the secondary ion yield and can even promote the desorption of Si from the analysis surface.

36 MATERIALS SCIENCE↗

Diffusion of Mn in GaAs studied by quantitative time-of-flight secondary ion mass spectrometry

Diffusion coefficients and the activation energy for Mn diffusion in ion-implanted and layered epitaxial structures of Ga{sub 1-x}Mn{sub x}As/GaAs are reported from quantitative time-of-flight secondary ion mass spectrometry. Samples are annealed between the growth temperature (as low as 200 deg. C) and approximately 400 deg. C. This temperature range is reported to improve the Curie temperature, which is important for the spintronic applications of these materials. Quantitative diffusion information is obtained by calibrating the Mn concentration to ion-implanted standards and the depth scale to profilometry measurements. Depth profiles obtained for ion-implanted Mn in GaAs at a dose of 1.35x10{sup 15} atoms/cm{sup 2} show increased Mn concentration within the top 5 nm of the sample but otherwise reveal no significant differences in the implantation shape after annealing up to 350 deg. C. For a higher implantation dose of 8.10x10{sup 15} Mn atoms/cm{sup 2}, diffusion is initiated after annealing at 300 deg. C with more significant diffusion at higher temperatures. The analysis of annealed epitaxial films of even higher concentration (Ga{sub 0.89}Mn{sub 0.11}As) exhibits diffusion at all temperatures measured (200-400 deg. C) and an activation energy of 0.67+-0.09 eV is calculated by fitting the profiles to an error function.

36 MATERIALS SCIENCE↗

Compositional and Structural Study of Gd Implanted ZnO Films

We report a compositional and structural study of ZnO films implanted with 30 keV Gd ions. The depth profile of the implanted ions, measured by Rutherford backscattering spectrometry, matches predictions of DYNAMIC-TRIM calculations. However, after annealing at temperatures above 550 deg. C the Gd ions are observed to migrate towards the bulk, and at the same time atomic force microscope images of the film surfaces show significant roughening. Raman spectroscopy shows that the annealed films have a reduced number of crystalline defects. The overall results are useful for developing an implantation-annealing regime to produce well characterized samples to investigate magnetism in the ZnO:Gd system.

36 MATERIALS SCIENCE↗

Influence of annealing atmosphere on the magnetic properties of SiO{sub 2}/Fe/SiO{sub 2} sandwiched nanocomposite films

The magnetic properties of SiO{sub 2}/Fe/SiO{sub 2} nanocomposite films are studied by magnetic force microscopy and vibrating sample magnetometer. The films were fabricated by alternately depositing SiO{sub 2}, Fe, and SiO{sub 2} on Si substrates with magnetron sputtering followed by thermal annealing. It is found that the annealing atmosphere significantly influences the sample structure, composition, and magnetic properties. The samples annealed in forming gas show much better magnetic properties than those annealed in vacuum and in N{sub 2}. The saturation magnetization can reach 200 emu/g, fairly close to the value of bulk Fe, and the coercivity can reach 400 Oe, much higher than 10 Oe of the bulk Fe. X-ray photoelectron spectroscopic depth profile measurement was carried out to study the mechanism of the strong influence of annealing atmosphere. For the samples annealed in forming gas, Fe nanoparticles are mildly oxidized, forming thin shells of Fe{sub 2}O{sub 3} surrounding them, which is beneficial for maintaining the ferromagnetic behavior and enhancing the coercivity of nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Crater effects on H and D emission from laser induced low-pressure helium plasma

An experimental study has been performed on the effects of crater depth on the hydrogen and deuterium emission intensities measured from laser plasmas generated in low-pressure helium ambient gas from zircaloy-4 samples doped with different H and D impurity concentrations as well as a standard brass sample for comparison. The results show that aside from emission of the host atom, the emission intensities of other ablated atoms of significantly smaller masses as well as that of the He atom generally exhibit relatively rapid initial decline with increasing crater depth. This trend was found to have its origin in the decreasing laser power density arriving at the crater bottom and thereby weakened the shock wave generated in the crater. As the crater deepened, the declining trend of the intensity appeared to level off as a result of compensation of the decreasing laser power density by the enhanced plasma confinement at increasing crater depth. Meanwhile, the result also reveals the significant contribution of the He-assisted excitation process to the doped hydrogen and deuterium emission intensities, leading to similar crater-depth dependent variation patterns in contrast to that associated with the surface water, with growing dominance of this common feature at the later stage of the plasma expansion. Therefore, a carefully chosen set of gate delay and gate width which are properly adapted to the crater-depth dependent behavior of the emission intensity may produce the desired intrinsic emission data for quantitative depth profiling of H impurity trapped inside the zircaloy wall.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗