Search NASA⌕ Search

SEARCH · Search NASA

Results for “dynamic performance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Effect of Mechanical Deformation on the Dielectric Electric Field in Dynamic Umbilical Cables

Wave energy converter (WEC) systems have unique umbilical cable design requirements compared to conventional marine designs. Due to their dynamic nature, WEC umbilical cables are required to handle increased loads and larger motions over longer deployment scenarios. However, the life expectancy of dynamic umbilical cables is predominantly analyzed for mechanical fatigue, with little consideration given to the effect of mechanical stress on the response of the dielectric as it has been previously assumed that the non-polymeric components will fail prior to the polymeric components. In this work, we explore the effects of mechanical bending on the concentration of the electric field in the insulation of a conceptual three-core dynamic umbilical cable to determine the limiting requirements for life expectancy. A conceptual industrial schematic of a medium voltage dynamic umbilical cable was used as the basis for the WEC system under study. Simulations on the dynamic umbilical cable were performed using COMSOL Multiphysics®. Mechanical loads up to the calculated limit (2.64 m minimum bend radius or 388 kN transverse load) were applied to the dynamic umbilical in a step-wise fashion with one end of the umbilical cable fixed. One-way coupling in three-dimensions was conducted by first determining the engineering strains, then using the engineering strains as the initial condition for determination of the Green-Lagrange strains, and lastly calculating the electric field in the deformed dielectric. Based upon the input load, deformation of the dielectric at the minimum bend radius produced an increase in the electric field of more than 12% when compared to the undeformed umbilical cable, which may lead to dielectric breakdown of the insulation prior to mechanical failure of the umbilical cable.

Spencer, Mychal P.↗
DOE OSTI2021

Visual HPC Workflows for the Analysis of System Dynamics Models

Visual analytics supported by high performance computing (HPC) accelerates and enhances the discovery, exploration, and analysis of causal patterns in complex system dynamics (SD) models. We present a suite of visualization-assisted ensemble-based techniques for hypothesis generation and testing, and for sensitivity analysis. By employing HPC to provide parallel, on-demand simulation of SD models, one can “steer” an ensemble of simulated scenarios in real time as one first formulates and then informally tests those hypotheses: this provides rapid feedback for analysts to refine their understanding of the causal relationships emergent from a model. Such understandings can be followed and augmented by rigorous application of statistical methods, namely global variance-based sensitivity analysis, Monte-Carlo filtering, adaptive regional sensitivity analysis, and self-organized maps: here timely computation relies on HPC, while effective presentation emphasizes high-dimensional multivariate data visualization. Immersive visualization in virtual 3D environments provides an excellent adjunct to the traditional 2D graphics typically used for SD models, as it generates an embodied understanding of model behavior and facilitates an active, collaborative critique of model structure and output. Finally, we summarize prospects for HPC-enabled visual analytics applied to SD modeling.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Preparing an Incompressible-Flow Fluid Dynamics Code for Exascale-Class Wind Energy Simulations

The U.S. Department of Energy has identified exascale-class wind farm simulation as critical to wind energy scientific discovery. A primary objective of the ExaWind project is to build high-performance, predictive computational fluid dynamics (CFD) tools that satisfy these modeling needs. GPU accelerators will serve as the computational thoroughbreds of next-generation, exascale-class supercomputers. Here, we report on our efforts in preparing the ExaWind unstructured mesh solver, Nalu-Wind, for exascale-class machines. For computing at this scale, a simple port of the incompressible-flow algorithms to GPUs is insufficient. To achieve high performance, one needs novel algorithms that are application aware, memory efficient, and optimized for the latest-generation GPU devices. The result of our efforts are unstructured-mesh simulations of wind turbines that can effectively leverage thousands of GPUs. In particular, we demonstrate a first-of-its-kind, incompressible-flow simulation using Algebraic Multigrid solvers that strong scales to more than 4000 GPUs on the Summit supercomputer.

algebraic multigrid↗
DOE OSTI2025

Enhanced quasiparticle relaxation in a superconductor via the proximity effect

Quasiparticle dynamics have been identified as an important factor in the operational performance of superconductors in quantum computing and sensing applications. In order to study such dynamics, we performed measurements of quasiparticle transport in a superconductor engineered to enhance quasiparticle relaxation. We found that a thin, highly disordered normal metal layer can be used to greatly reduce the relaxation time of quasiparticles in a superconductor, as seen by a large reduction in the quasiparticle charge imbalance in a fully proximitized Cu/Al bilayer wire, without significantly affecting the properties of the superconductor. The enhanced relaxation is likely due to an increased electron–electron scattering rate in the disordered normal metal. Our results provide a positive indication that quasiparticle relaxation can be substantially enhanced via a simple and technologically viable method, and demonstrate that direct measurement of quasiparticle imbalance can be a useful tool for the assessment and engineering of superconductors in various applications at mK temperatures.

Ryan, Kevin M. [Northwestern U.] (ORCID:0000000293↗
DOE OSTI2025

Combined molecular and spin dynamics simulation of BCC iron with vacancy defects

Utilizing an atomistic computational model, which handles both translational and spin degrees of freedom, combined molecular and spin dynamics simulations have been performed to investigate the effect of vacancy defects on spin wave excitations in ferromagnetic iron. Fourier transforms of space- and time-displaced correlation functions yield the dynamic structure factor, providing characteristic frequencies and lifetimes of the spin wave modes. A comparison of the system with a 5% vacancy concentration with pure lattice data shows a decrease in frequency and a decrease in lifetime for all transverse spin wave excitations observed. In addition, the clearly defined transverse spin wave excitations are distorted with the introduction of vacancy defects, and we observe reduced excitation lifetimes due to increased magnon–magnon scattering. We observe further evidence of increased magnon–magnon scattering, as the peaks in the longitudinal spin wave spectrum become less distinct. Finally, similar impacts are observed in the vibrational subsystem, with a decrease in characteristic phonon frequency and flattening of lattice excitation signals due to vacancy defects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Center for Tokamak Transient Simulations (RPI Unstructured Mesh Developments for FES SciDAC4 Partnerships) (Final Report)

The goal of this project was the development of unstructured mesh technologies for fusion simulation codes” for FES SciDAC partnerships and to integrate those technologies into the simulation workflows of those partnerships. Specific developments were executed in support of the following FES SciDAC4 partnerships: Partnership Center for High‐fidelity Boundary Plasma Simulation (HBPS), Center for Integrated Simulation of Fusion Relevant RF (RF‐SciDAC), Center for Plasma Surface Interactions: Predicting the Performance and Impact of Dynamic PFC Surfaces (PSI2), and Center for Tokamak Transient Simulations (CTTS). The key unstructured mesh development areas addressed in this project include (i) methods to most effectively perform PIC calculations on unstructured meshes; (ii) creating meshes for fusion systems accounting for any desired level of geometric complexity and providing physics aware mesh configurations, (iii) adapting unstructured meshes to control the discretization errors, (iv) executing unstructured mesh calculations on GPU accelerated systems, (v) supporting physics/application‐specific PIC operations including surface/wall interactions of particles, (vi) providing infrastructure tools to support the interactions of solvers with unstructured meshes, and (vii) providing advanced methods for coupling plasma physics codes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Preparing an Incompressible-Flow Fluid Dynamics Code for Exascale-Class Wind Energy Simulations: Preprint

The US Department of Energy has identified Exascale-Class wind farm simulation tools as critical to wind energy scientific discovery. A primary objective of the Exawind project is to build high-performance, predictive Computational Fluid Dynamics tools that satisfy these modeling needs. GPU accelerators will serve as the computational thoroughbreds of next generation, Exascale-Class, platforms. Here, we report on our efforts for preparing the Exawind unstructured mesh solver, Nalu-Wind, for Exascale-Class machines. For computing at this scale, a simple port of the incompressible-flow algorithms to GPUs is not sufficient. One needs novel algorithms that are application aware, memory efficient, and optimized for latest generation GPU devices to get high-performance. The result of our efforts are unstructured mesh simulations of wind turbines that use 1/6 the compute resources of Summit supercomputer at Oak Ridge National Lab. In particular, we demonstrate a first-of-its-kind, simulation using Algebraic Multigrid solvers on over 4000 GPUs.

algebraic multigrid↗
DOE OSTI2023

Driving and characterizing nucleation of urea and glycine polymorphs in water

Crystal nucleation is relevant across the domains of fundamental and applied sciences. However, in many cases, its mechanism remains unclear due to a lack of temporal or spatial resolution. To gain insights into the molecular details of nucleation, some form of molecular dynamics simulations is typically performed; these simulations, in turn, are limited by their ability to run long enough to sample the nucleation event thoroughly. To overcome the timescale limits in typical molecular dynamics simulations in a manner free of prior human bias, here, we employ the machine learning-augmented molecular dynamics framework “reweighted autoencoded variational Bayes for enhanced sampling (RAVE).” We study two molecular systems—urea and glycine—in explicit all-atom water, due to their enrichment in polymorphic structures and common utility in commercial applications. From our simulations, we observe multiple back-and-forth nucleation events of different polymorphs from homogeneous solution; from these trajectories, we calculate the relative ranking of finite-sized polymorph crystals embedded in solution, in terms of the free-energy difference between the finite-sized crystal polymorph and the original solution state. We further observe that the obtained reaction coordinates and transitions are highly nonclassical.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Performance Analysis of High-Temperature Heat Pumps with Two-Phase Ejectors

A two-phase ejector recovers the energy in the refrigerant cycles’ throttling process, improving the coefficient of performance (COP) of high-temperature heat pumps (HTHPs). This study investigated the effects of the mixing pressure on the performance of two-phase ejectors and ejector-assisted HTHPs. A 1D theoretical model of a two-phase ejector was built to predict the internal fluid dynamics and evaluate ejector performance. A thermodynamic model of an ejector-assisted HTHP was built to evaluate the COP of HTHPs and the volumetric heating capacity of low-global warming potential refrigerants. The results demonstrate that an optimum mixing pressure in a two-phase ejector provides the best performance of a two-phase ejector and ejector-assisted HTHP. The optimum mixing pressure was slightly lower than the evaporation pressure. At this pressure, the two-phase flow in the ejector was subsonic. For ejector-assisted HTHPs using low–global warming potential refrigerants at a sink temperature of 120°C, temperature lift of 40°C, and subcooling of 10°C, a two-phase ejector has an average ejector efficiency of 0.334, and the COP and volumetric heating capacity were improved by 7.2% and 7.3%, respectively.

Wang, Pengtao↗
DOE OSTI2022

Design and performance analysis of a Swirl Pintle injector for a 1 MW th pressurized oxy-coal combustor

Pressurized Oxy-coal combustion has the potential to achieve high thermal efficiency by recovering the latent heat of steam from flue gases and providing options for up to 95% carbon capture. Here, this study proposes a novel burner technology for pressurized oxy-coal combustion and investigates its operability. Three burner versions are designed and tested; no swirl, swirl numbers 0.9 and 1.2 to identify optimum design parameters and performance. A commercially available Dantec Dynamics software is used to conduct the shadowgraph experiments to observe burner performance. Coal water slurry is used as fuel with three different slurry ratios where the coal percentage by weights were 30, 40 and 50. Droplet size, distribution, spray angle and jet breakup lengths are measured and analyzed to quantify the performance. The study found that increasing the swirl number enhanced atomization. Implementing swirlers allowed the jet to spread through faster primary jet separation, thus improving atomization. In addition, higher slurry ratios improved the generation of smaller particles. However, it was also found that excessive increases in oxidizer momentums negatively impact the atomization process by jet shrinkage. The study concluded that operating a pintle burner at 1.2 swirl conditions with a 40/60 slurry ratio produces optimum performance.

42 ENGINEERING↗
DOE OSTI2024

Iron Impurity Impairs the CO 2 Capture Performance of MgO: Insights from Microscopy and Machine Learning Molecular Dynamics

Magnesium oxide (MgO) is a promising sorbent for direct air capture (DAC) of carbon dioxide. Iron (Fe) is a common impurity in naturally occurring MgO and minerals used to produce MgO, yet a molecular-scale understanding of Fe-doping effects on carbonation is lacking. Here, in this study, we observed reduced carbonation performance in Fe-doped MgO experimentally. The energetics of adsorbing a (bi)carbonate ion on pristine and Fe-doped MgO(001) surfaces were further investigated using ab initio and machine learning potential molecular dynamics coupled with metadynamics simulations. Both pristine and Fe-doped surfaces exhibited a basic (OH – ) hydration layer, where the (bi)carbonate ion adsorption is thermodynamically favorable. However, the dissolution of surface Fe had smaller energy barriers and was more favorable than Mg. Leached Fe likely neutralized the near-surface basicity, yielding reduced reactivity on Fe-doped MgO. Our observations offer critical insights for material selection and emphasize the importance of evaluating the geologic origin of earth materials used for DAC.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Heat Integration Optimization and Dynamic Modeling Investigation for Advancing the Coal-Direct Chemical Looping Process

The purpose of the project is to address the optimization and startup operation of a modular coal direct chemical looping (CDCL) combustion system integrated with a steam cycle for power generation to reduce the risks involved in further scale-up of the technology. The modular reactor design of the CDCL process provides flexibility in the fabrication of the reactor and in its operating capacity (i.e. turndown ratio) at the cost of a more complex heat exchange network (HEN) design and integration. To address the technology gaps and advance the efficiency and economic feasibility of the CDCL technology, the project will perform a detailed and comprehensive analysis of the integration of a modular CDCL reactor system and a steam cycle system under both static and transient conditions via HEN process performance simulations and system dynamic modeling, respectively. The scope of work consists of 1) Experimental and computational studies of the CDCL combustor reactor 2) Comprehensive static (i.e. steady-state) system HEN design analysis in CDCL 550 MWe commercial unit for power generation and 3) Dynamic modeling of site specific design of 10MWe CDCL large pilot plant. The project team has successfully developed and validated a kinetic model for the oxidation of oxygen carriers in the combustor using the unreacted shrinking core model (UCSM). The model is capable of capturing the oxidation kinetics of fully or partially reduced oxygen carrier particles. A computational fluid dynamics (CFD) model is developed to simulate the hydrodynamics, heat transfer, and chemical reaction occurring in the CDCL combustor. The model is developed in MFIX and ANSYS Fluent. Key aspects of CDCL combustor operation, including heat transfer, oxygen carrier oxidation, and the transport of oxygen carrier particles, are simulated using this CFD model. The HEN for a commercial scale 550 MWe CDCL power plant is simulated and optimized using ASPEN Plus. Practical design considerations are incorporated based on industrial experiences. The performance and cost for the commercial CDCL plant is updated based on these analyses. A dynamic model for the 10 MWe CDCL pilot plant is developed in ProTRAX simulation software. The model is based on the pilot plant design developed in project DE-FE0027654 “10 MWe CDCL Large Pilot Plang – Pre-FEED Study” and the steam cycle data obtained from Dover Light & Power plant. The transient behaviors during pilot plant load variation are simulated using the dynamic model.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

Dynamic Matrix Completion Based State Estimation in Distribution Grids

The power distribution network is undergoing tremendous transformation due to an increase in the penetration of renewable energy resources and electric vehicles. These changes have resulted in greater uncertainty and dynamics in the distribution grid states. Therefore, the ability to track and monitor system states has become a critical need for accurate and timely control actions. In this paper, we propose two dynamic sparsity-based state estimation approaches for distribution systems: (1) locally weighted matrix completion (LW-MC) and (2) Bayesian matrix completion with Kalman filter prediction (BMC-KF). The performance of the proposed dynamic state estimation strategies is compared with the classic/static matrix completion (static-MC) approach using the IEEE 37 and IEEE 123 bus test systems. Finally, results indicate that BMC-KF approach outperforms both LW-MC as well as static-MC even when 30% of the measurement data is available. Computational complexity associated with both approaches is quantified.

42 ENGINEERING↗
DOE OSTI2025

Impact of Different Thermal Gradients on the Dynamics of Cylindrical Lithium-ion Cells Subject to Accelerated Aging and on Module Performance

This study investigates the impacts of applying different thermal gradient patterns to cylindrical lithium-ion cells in a module on cell dynamics (temperatures, current flows, state of charge), module performance (evolution of resistance, capacity, and energy versus cycle number), and module lifetime. The thermal gradients were generated using cooling plates (CPs) with three different flow-field designs, namely, straight, perpendicular, and U-turn. The study uses computational fluid dynamics (CFD), the pseudo-two-dimensional (P2D) battery model, capacity loss and increased impedance due to the growth of a solid-electrolyte-interphase, and the electric current distribution from module terminals to cells that depends on the series-parallel electrical connections among the cells. The impact of the thermal gradient (resulting from the CP designs) on the variability in resistance, current, state of charge, and voltage among the cells was analyzed and linked to differences in the module's performance. Applying a thermal gradient to parallel-connected strings of series-connected cells led to variation in the current through each parallel string and an imbalance in the voltage of series-connected cells. Module performance is poorer when the thermal gradient causes a voltage imbalance than when it causes a current imbalance. Module performance becomes the worst when both current variation and voltage imbalance happen together. For instance, the module's lifetime (estimated as reaching 80% of its initial capacity) varied by 5% to 17.5%, depending on the magnitude and pattern of the imposed thermal gradient. As the relative orientation between thermal gradients and cells' electrical connectivity influences the module's performance, appropriate consideration should be given to the choice of the CP, especially if large thermal gradients are allowed.

Battery thermal management↗
DOE OSTI2025

A Comparison of GPU-Accelerated Multiphase CFD Solvers on the Polaris Supercomputer: Part 1

This report is in support of the Innovative and Novel Computational Impact on Theory and Experiment (INCITE) program sponsored by the U.S. Department of Energy (USDOE). With INCITE-level resources, one project, titled BubblyFlow, was granted computational resources for the 2025 calendar year on the Polaris supercomputer at the Argonne Leadership Computing Facility (ALCF). The project aims to conduct simulations to understand the fundamental characteristics of turbulent bubbly flow phenomena in nature. Staff at the ALCF and Argonne’s Computational Science division, along with collaborators at the City College of New York and University of Illinois at Chicago, helped a summer student to assess the accuracy and performance of two high performance computing (HPC) codes. Both codes, ImExLBM and FluTAS, are fundamentally different in their mathematical and numerical modeling. However, both may be used to solve the same physical problem. The collaboration sought to better understand the differences between both codes in terms of accuracy and efficiency. This would ultimately help the BubblyFlow project better utilize resources and establish a knowledge-base of code capabilities in future simulation campaigns. We compare ImExLBM and FluTAS, two high-performance multiphase computational fluid dynamics (CFD) solvers, in terms of physical fidelity, time-to-solution, and parallel efficiency. We validate ImExLBM (Implicit-Explicit Lattice Boltzmann Method) against a canonical benchmark and assess it’s performance relative to FluTAS (Fluid Transport Accelerated Solver), a well-established open-source CFD code.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Simulation-based methodology to assess the lattice defects creation as energy storing process

In nuclear industry, damages caused to in-core structural materials by high-energy neutrons have been studied for years. Recently, the possibility of storing energy through the creation of defects in crystalline materials via heavy particle bombardment was investigated. To evaluate the potential of the Wigner effect as energy-storing process, a graphite-moderated Molten Salt Reactor was adopted as a test case. Neutronics simulations performed with OpenMC Monte Carlo code allowed estimating the amount of energy released during fission events, the fraction that is deposited in graphite, and the fraction that has the potential to cause radiation damages. Additionally, molecular dynamics simulations were then performed to study the evolution of cascades triggered by high-energy neutrons. As a major outcome, a more accurate estimate of the radiation damage with respect to the traditional approaches was obtained, and the fraction of the deposited neutron energy that can be stored through long-lived defects was quantified.

25 ENERGY STORAGE↗
DOE OSTI2022

Spatiotemporal Visualization and Chemical Identification of the Metal Diffusion Layer at the Electrochemical Interface

The diffusion layer created by transition metal dissolution is ubiquitous at the electrochemical solid-liquid interface and plays a key role in determining electrochemical performance. Tracking the spatiotemporal dynamics of the diffusion layer has remained an unresolved challenge. With spatially resolved synchrotron X-ray fluorescence microscopy and micro-X-ray absorption spectroscopy, we demonstrate the in situ visualization and chemical identification of the dynamic diffusion layer near the electrode surface under electrochemical operating conditions. Finally, our method allows for direct mapping of the reactive electrochemical interface and provides insights into engineering the diffusion layer for improving electrochemical performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Computational studies of hydraulic stressors for biological performance assessment in a hydropower plant with Kaplan turbine

We report Hydropower is currently one of the preeminent sources of renewable energy in the United States and globally. Hydropower plants also have detrimental impacts on the environment and ecology, including direct impacts to anadromous fish populations. The computational fluid dynamics (CFD) – based Biological Performance Assessment (BioPA) toolset is used for biological evaluations of fish passage through hydropower plants. The hydraulic environment of a hydropower plant was evaluated using CFD coupled with discrete element method (DEM) simulations. The predicted flow field and particle collision rate were validated against the experimental data in a water flume that has an idealized hydroturbine distributor geometry. Flow simulations were conducted to evaluate the hydraulic stressors, such as nadir pressure, fluid shear, runner collision, in a physical scale in a hydropower plant with Kaplan turbine which are responsible for injury and mortality of fish in a downstream migration. The cumulative exposure probability for the nadir pressure and collision with turbine runner was found to decrease with increased discharge rate. The lowest discharge rate shows the higher value of cumulative shear exposure probability. The maximum value of collision velocity increases with increased discharge rate. We offer the conclusions that will help in understanding various hydraulic stressors for biological assessment for environmentally sustainable hydroturbine passage.

13 HYDRO ENERGY↗