Search NASA⌕ Search

SEARCH · Search NASA

Results for “electron backscattered diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Microstructure of selective laser melted CM247LC nickel-based superalloy and its evolution through heat treatment

The selective laser melting of high temperature alloys is of great interest to the aerospace industry as it offers the prospect of producing more complex geometries than can be achieved with other manufacturing methods. In this study, the microstructure of the nickel-based superalloy, CM247LC, has been characterised following selective laser melting and after a post deposition heat treatment below the γ′ solvus temperature. In the as-deposited state, scanning electron microscopy with electron backscatter diffraction revealed a fine, cellular microstructure with preferential alignment of 〈001〉 along the build direction. A high dislocation density was seen at the periphery of the cells, indicating substantial localised deformation of the material. Fine primary MC carbides were also observed in the inter-cellular regions. High-resolution transmission electron microscopy identified the occurrence of very fine γ′ precipitates, approximately 5 nm in diameter, dispersed within the gamma phase. After heat treatment, the elongated cell colonies were observed to partially coalesce, accompanied by a decrease in dislocation density, producing columnar grains along the build direction. Cuboidal γ′ precipitates approximately 500 nm in diameter were observed to form in the recrystallised grains, accompanied by larger γ′ precipitates on the grain boundaries.

36 MATERIALS SCIENCE↗

BiFeO{sub 3}/La{sub 0.7}Sr{sub 0.3}MnO{sub 3} heterostructures deposited on spark plasma sintered LaAlO{sub 3} substrates

Multiferroic BiFeO{sub 3} (BFO)/La{sub 0.7}Sr{sub 0.3}MnO{sub 3} heterostructured thin films were grown by pulsed laser deposition on polished spark plasma sintered LaAlO{sub 3} (LAO) polycrystalline substrates. Both polycrystalline LAO substrates and BFO films were locally characterized using electron backscattering diffraction, which confirmed the high-quality local epitaxial growth on each substrate grain. Piezoforce microscopy was used to image and switch the piezo-domains, and the results are consistent with the relative orientation of the ferroelectric variants with the surface normal. This high-throughput synthesis process opens the routes towards wide survey of electronic properties as a function of crystalline orientation in complex oxide thin film synthesis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Engineering of Nanoscale Heterogeneous Transition Metal Dichalcogenide–Au Interfaces

Engineering the transition metal dichalcogenide (TMD)–metal interface is critical for the development of two-dimensional semiconductor devices. By directly probing the electronic structures of WS 2 –Au and WSe 2 –Au interfaces with high spatial resolution, we delineate nanoscale heterogeneities in the composite systems that give rise to local Schottky barrier height modulations. Photoelectron spectroscopy reveals large variations (>100 meV) in TMD work function and binding energies for the occupied electronic states. Characterization of the composite systems with electron backscatter diffraction and scanning tunneling microscopy leads us to attribute these heterogeneities to differing crystallite orientations in the Au contact, suggesting an inherent role of the metal microstructure in contact formation. Here we then leverage our understanding to develop straightforward Au processing techniques to form TMD–Au interfaces with reduced heterogeneity. Our findings illustrate the sensitivity of TMDs’ electronic properties to metal contact microstructure and the viability of tuning the interface through contact engineering.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Characterization of Subsurface Microstructural Alterations Induced by Hard Turning of Inconel 718

Conventional machining especially hard turning is commonly used in aerospace industry to produce the final shape of cylindrical parts. However, the process generates damages and microstructural alterations on the surface and at the subsurface layer, in particular the cracking of hard carbides particles. The present paper focuses on investigating the probable mechanisms responsible for carbide cracking and the formation of a softened layer at a depth between 10 and 30 µm below the machined surface. Advanced techniques, such as laser confocal microscopy and field emission gun scanning electron microscope equipped with in situ picoindenter and electron backscatter diffraction, were used to characterize and analyze the evolution of the microstructure in the affected layer and propose the possible governing mechanisms for the observations.

36 MATERIALS SCIENCE↗

Epitaxial growth of CdTe thin film on cube-textured Ni by metal-organic chemical vapor deposition

CdTe thin film has been grown by metalorganic chemical vapor deposition (MOCVD) on Ni(100) substrate. Using x-ray pole figure measurements we observed the epitaxial relationship of {111}CdTe// {001}Ni with [110]CdTe//[010]Ni and [112] CdTe//[100]Ni. The 12 diffraction peaks in the (111) pole figure of CdTe film and their relative positions with respect to the four peak positions in the (111) pole figure of Ni substrate are consistent with four equivalent orientational domains of CdTe with three to four superlattice match of about 0.7% in the [110] direction of CdTe and the [010] direction of Ni. The electron backscattered diffraction (EBSD) images show that the CdTe domains are 30 degrees orientated from each other.

GIARE, C↗

Development of Fe-9Cr Alloy via High-Energy Ball Milling and Spark Plasma Sintering

Iron and chromium powders were mixed and mechanically alloyed via high-energy ball milling for different time durations (2–20 h) to produce an alloy powder with a nominal composition of Fe-9Cr (wt.%). The milled Fe-9Cr powders were analyzed using scanning electron microscopy (SEM), x-ray diffraction (XRD) and transmission electron microscopy (TEM) to understand the impact of ball milling (BM) time on the characteristics of the milled powder. The optimized milled powder samples were then consolidated via spark plasma sintering (SPS) for different dwell times and temperatures. The density of consolidated samples was found to reach a maximum of 98%. Microstructural characterization of the SPS samples were performed using XRD, SEM, TEM and electron backscatter diffraction. This study highlights the principles and importance of high-energy BM and SPS of Fe-9Cr model alloy for the future development of more complex oxide dispersion-strengthened alloys for various applications including advanced nuclear reactor applications.

36 MATERIALS SCIENCE↗

Nanoindentation Investigation of Chloride-Induced Stress Corrosion Crack Propagation in an Austenitic Stainless Steel Weld

Transgranular chloride-induced stress corrosion cracking (TGCISCC) is a mounting concern for the safety and longevity of arc welds on austenitic stainless steel (AuSS) nuclear waste storage canisters. Recent studies have shown the key role of crystallography in the susceptibility and propagation of TGCISCC in SS weldments. Given that crystallography underlies mechanical heterogeneities, the mechanical-crystallographic relationship during TGCISCC growth must be understood. In this study, welded SS 304L coupons are loaded in four-point bend fixtures and then boiled in magnesium chloride to initiate TGCISCC. Nanoindentation mapping is paired with scanning electron microscopy (SEM) electron backscatter diffraction (EBSD) to understand the correlation between grain orientation, grain boundaries, and hardening from TGCISCC propagation. The nanoindentation hardness of individual grains is found to not be a controlling factor for TGCISCC propagation. However, intragranular hardness is generally highest immediately around the crack due to localized strain hardening at the crack tip. This work shows that nanoindentation techniques can be useful in understanding CISCC behaviors when paired with electron microscopy.

36 MATERIALS SCIENCE↗

Understanding the Mechanism of Dynamic Recrystallization During High-Temperature Deformation in Nb-1Zr-0.1C Alloy

In the present investigation, a systematic study of the evolution of microstructure and crystallographic texture during hot deformation of Nb-1Zr-0.1C was carried out in the temperature range 1773-1973 K (1500-1700 °C) at different strain rates of 0.001, 0.01 and 0.1 s{sup −1}. The aim was to examine the mechanisms of dynamic recovery and recrystallization in a high-temperature range. A detailed microstructural analysis of the deformed samples was performed using the electron backscatter diffraction technique to study the occurrence and nature of various dynamic restoration processes; the different regimes of dynamic recovery and recrystallization were identified. The orientations of the dynamically recrystallized grains were found to be (001) .

36 MATERIALS SCIENCE↗

High dislocation density of tin induced by electric current

A dislocation density of as high as 10{sup 17} /m{sup 2} in a tin strip, as revealed by high resolution transmission electron microscope, was induced by current stressing at 6.5 x 10{sup 3} A/ cm{sup 2}. The dislocations exist in terms of dislocation line, dislocation loop, and dislocation aggregates. Electron Backscattered Diffraction images reflect that the high dislocation density induced the formation of low deflection angle subgrains, high deflection angle Widmanstätten grains, and recrystallization. The recrystallization gave rise to grain refining.

36 MATERIALS SCIENCE↗

Short communication on Kinetics of grain growth and particle pinning in U-10 wt.% Mo

Samples of a U-10Mo alloy was annealed at temperatures ranging from 700 °C to 900°C for periods lasting up to 24 hours. Annealed microstructures were examined using Electron Backscattered Diffraction (EBSD) to obtain average grain sizes and grain size distributions. From the temporal evolution of the average grain size, the activation energy of grain growth was determined to be 172.4 ± 0.961 kJ/mol. Grain growth over the annealing period stagnated after a period of 1 to 4 hours. This stagnation is apparently caused by the pinning effect of second-phase particles in the materials. In conclusion, back-scattered electron imaging (BSE) was used to confirm that these particles do not appreciably coarsen or dissolve during annealing at the aforementioned temperatures.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Enhanced electromechanical coupling in Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}-PbTiO{sub 3} <001>{sub C} radially textured cylinders

We demonstrate Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}-PbTiO{sub 3} cylinders with ∼98% <100>{sub C} texture along the radial direction. A giant enhancement in the magnitude of electromechanical coupling factor (k{sub 31} = k{sub h} = 0.60, and k{sub l} = 0.7) was obtained for textured cylinder, and d{sub 31} × g{sub 31} was measured to be 6766 × 10{sup −15} m{sup 2}/N which is 3–6 times higher than that of commercial Pb(Zr,Ti)O{sub 3} compositions. The crystallographic grain orientation in the textured cylinder was visualized by electron backscatter diffraction, and the domain structure was characterized by piezoresponse force microscopy. Using these results, we explain the mechanism for this enhanced performance of radially textured piezoelectrics.

36 MATERIALS SCIENCE↗

Effect of Annealing Treatment on Mechanical and Magnetic Softening Behaviors of Cold Rolled Interstitial-Free Steel

The recovery and recrystallization behaviors of low-carbon interstitial-free steel are investigated at different annealing temperatures (200-690 °C) through correlation between the changes in magnetic parameters (coercivity and r.m.s. voltage), hardness, tensile strength and high-angle grain boundary fractions (HAB). Magnetic parameters and tensile strength show a significant change within recovery region (200-500 °C), while the hardness variation is very minimal at this temperature region. On the other hand, the hardness is abruptly changed compared to magnetic properties at higher annealing temperature (550-640 °C). The grain boundary characteristics and microtexture evolution occurring at recrystallization regime are evaluated by orientation imaging microscopy (OIM) and orientation distribution function (ODF) through electron backscattered diffraction (EBSD). The increase in recrystallization fraction noticeably affects microtexture property, justifying with the strengthening of γ-fiber, weakening of α-fiber and disappearance of rotated cube component with increasing annealing temperatures.

36 MATERIALS SCIENCE↗

Characterization of Static Recrystallization of a Ni-Cr-Mo-Based C276 Superalloy in Two-Stage Isothermal Compression

In order to clarify the microstructure evolution characteristics during holding period after slight degree of deformation for a Ni-Cr-Mo-based C276 superalloy, two-stage isothermal compression tests have been performed at the temperature range of 1000-1150 °C and the strain rate range of 0.1-5 s{sup −1}. The stress–strain curves and microstructure observation infer that both static recovery (SRV) and static recrystallization (SRX) took place during the holding period when the specimens were deformed at 1100-1150 °C and only SRV occurred in the specimens that deformed at the temperatures lower than 1100 °C. The softening effects increase with the increasing temperature and deformation degree, while the influence of strain rate seems less pronounced because of the limited stored energy resulted from the small deformation. The grain boundary characteristics, analyzed using electron backscatter diffraction technique, indicate that high densities of twins and Σ3 grain boundaries form associated with the nucleation and growth of SRX grains. Finally, the recrystallization during and after deformation, i.e., dynamic recrystallization, SRX and metadynamic recrystallization, was discussed concurrently.

36 MATERIALS SCIENCE↗

BERT Non-Destructively Probes the Microstructure of Dissimilar Welds [Poster]

Energy-resolved neutron imaging (ERNI) utilizes contrast provided by diffraction. Microstructure with >100µm grains as in cast, annealed or welded materials is difficult to characterize by X-ray or electron-based methods $\Rightarrow$ Well-suited for neutron Bragg-edge radiography. BERT was applied to dissimilar welds of Inconel on steel produced by additive manufacturing. Viewing the sample at time-of-flight/energy/wavelength where a single grain orientation dominates the attenuation allows to map grain orientations. Similarly to electron-backscatter diffraction (EBSD) but on cm length scales and through-thickness. Combined with texture measurements on the HIPPO instrument, identifying major grain orientations, 2D and 3D grain orientation maps are feasible. Results can guide development of thermo-mechanical treatment avoiding or introducing such microstructures, characterize dissimilar welds, interpretation of acoustic signals for quality control, guide destructive examination with X-rays/electrons, or provide data for codes predicting such microstructures.

36 MATERIALS SCIENCE↗

Benefits of using multiple Raman laser wavelengths for characterizing defects in a UO 2 matrix

Abstract Raman spectroscopy is one of the most useful techniques for studying the structure of UO 2 and changes due to specific defects caused by doping, changes in stoichiometry, irradiation, or heating under oxidizing conditions. In this paper, we illustrate several aspects of the application of Raman techniques to the study of UO 2 , including the use of wavelength‐dependent excitation (455, 532, and 785 nm) to assess the effects of doping (Nd, Th, and Zr), ion irradiation, and in situ heating and oxidation (UO 2 to U 3 O 8 ). Additionally, we show examples of how correlative microscopy is possible using electron backscatter diffraction combined with Raman maps of specific vibration bands or of laser‐induced luminescence generated by rare‐earth dopants in the matrix. For each of these applications, we suggest optimal excitation wavelengths that vary depending on the desired data. Blue (455 nm) excitation tends to promote oxidation even at low powers, but because Raman spectra change little with doping, irradiation‐induced changes are easier to observe. Green (532 nm) excitation is optimal for observing electron–phonon resonance effects in UO 2 and offers a good compromise for high‐temperature oxidation experiments, delivering high‐quality spectra for both UO 2 and U 3 O 8 . Infrared (785 nm) excitation is best for observing “defect” bands associated with doping in UO 2 , as changes with irradiation are small. Raman spectroscopy is particularly suited for studying the stability of UO 2 towards oxidation in the presence of dopants simulating fission products, where electron–phonon resonant effects, dopant ion luminescence, and mapping can be used together to investigate structural rearrangement as a function of temperature. These techniques can offer insight into microstructural changes in UO 2 fuels at higher burnups envisioned in future reactors.

42 ENGINEERING↗

In Situ Study of the Formation of Silicide Phases in Amorphous Co–Si Mixed Layers

We investigate Co silicide phase formation when extra Si is added within an as deposited 50 nm Co film. The addition of Si is investigated for both the Co/SiO{sub 2} and Co/Si(1 0 0) system. A series of 10 Co-Si mixed films with a Si content varying from 21 to 59 at.% was prepared and investigated during annealing with in situ X-ray diffraction. The oxide system is used as reference system to identify phases that initially crystallize in an amorphous mixture of a given composition. Multiple phases can nucleate, and the temperature of crystallization depends on the Co-Si atomic ratio. Upon heating of the Co(Si)/Si system, the first reaction is a similar crystallization reaction of the Co(Si) mixture. Once the first phase is formed, one has the normal system of a silicide phase in contact with an unlimited amount of Si from the substrate, and the sequential phase formation towards CoSi{sub 2} is established. For deposited layers of composition ranging from 48%Si to 52%Si, the CoSi is the first phase to form and increasing the amount of Si leads to a remarkable improvement of the thermal stability of CoSi on Si(1 0 0). CoSi{sub 2} nucleation was extensively delayed by 150 C compared to the reaction observed from a pure Co film on Si(1 0 0). Electron backscatter diffraction measurements reveal that in this range, the gradual Si increase systematically leads to bigger CoSi grains (up to 20 {micro}m). This shows that the grain size of the CoSi precursor strongly affects the nucleation of the following CoSi{sub 2} phase. Laser-light scattering measurements suggest that adding more than 42%Si reduces the roughness of the CoSi{sub 2} layer.

99 GENERAL AND MISCELLANEOUS↗

Direct Correlation of Charge Carrier Transport to Local Crystal Quality in Lead Halide Perovskites

Although solution processing methods provide an attractive route toward development of low-cost functional materials, these accessible fabrication approaches can engender high concentrations of microscopic structural defects that are detrimental to performance. In lead halide perovskites, structural disorder derived from solution processing has been implicated as an important determiner of photophysical properties. However, a direct correlation between the functional properties of these materials and the local crystal structure in which non-equilibrium states evolve has remained elusive, in part because structural heterogeneities occur on length scales that defy conventional characterization techniques. To address this knowledge gap, in this work we have combined ultrafast pump–probe microscopy and electron backscattering diffraction to directly correlate charge carrier transport with the local diffraction pattern contrast, an indicator of crystal quality. Spatial correlation of these measurements strongly suggests that even on individual single crystal CsPbBr3 domains, microscopic variability in the crystal quality profoundly impacts the efficiency of charge carrier transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dependence of the Electron Beam Energy and Types of Surface to Determine EBSD Indexing Reliability in Yttria-Stabilized Zirconia

Electron backscatter diffraction (EBSD) is a powerful technique for the surface microstructure analysis. EBSD analysis of cubic yttria-stabilized zirconia (YSZ) in two and three dimensions (2-D, 3-D) is demonstrated using sequential slicing from a focused ion beam (FIB) followed by EBSD mapping to represent 3-D reconstructed high density grain structure with random orientation. The statistics related to accuracy of EBSD band detection shows that probability of accurate grain orientation detection increased significantly when the electron beam energy is increased from 10 kV to 30 kV. As a result of better sampling with increased interaction volume, a disparity between local and average grain orientation angle also exhibited the dependence of the electron beam energy to determine the accuracy of grain orientation. To study the accuracy and quality of EBSD band detection as a function of surface roughness and over layer formation, rapid EBSD measurement tests are performed on (a) YSZ surfaces ion-polished at ion beam energies of 65 nA at 30 kV and 1 nA at 30 kV and (b) carbon coated versus uncoated YSZ surfaces. The EBSD results at both 10 kV and 30 kV electron beam energies indicate that EBSD band detection accuracy is negatively affected by surface roughness and amorphous over layer formation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗