Search NASA⌕ Search

SEARCH · Search NASA

Results for “ether”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Advanced Catalysts for Olefin Synthesis: Copper(II) Quinoline-Fused Oxazolidines in Alcohol Dehydration

The new copper(II) catalyst [Cu( Q FOX)- (CH 3 CN)][OTf] 2 has been synthesized and found to be active for alcohol dehydration to give olefins at 120 °C with a 1% catalyst loading ( Q FOX = di-2-quinolinyl-fused-oxazolidine). Benzylic, allylic, and tertiary alcohols are all dehydrated. In some cases, ethers are observed to be produced, but these are re-entrained into the catalytic cycle. Unactivated secondary alcohols are also dehydrated. Similar catalysts employing Mn II , Fe II , Co II , and Ni II were also synthesized but showed reduced dehydration activity compared to the copper(II) derivative. A Cu I analog was also prepared but did not show improved dehydration activity.

Alcohols↗
DOE OSTI2021

Diastereomers and Low-Temperature Oxidation

Diastereomers have historically been ignored when building kinetic mechanisms for combustion. Low-temperature oxidation kinetics, which continues to gain interest in both combustion and atmospheric communities, may be affected by the inclusion of diastereomers in radical chain-branching pathways. In this work, key intermediates and transition states lacking stereochemical specification in an existing diethyl ether low-temperature oxidation mechanism were replaced with their diastereomeric counterparts. Rate coefficients for reactions involving diastereomers were computed with ab initio transition state theory master equation calculations. The presence of diastereomers increased rate coefficients by factors of 1.2-1.6 across various temperatures and pressures. Ignition delay simulations incorporating these revised rate coefficients indicate that the diastereomers enhanced the overall reactivity of the mechanism by almost 15% and increased the peak ketohydroperoxide concentration by 30% in the negative temperature coefficient region at combustion-relevant pressures. Furthermore, these results provide an illustrative indication of the important role of stereomeric effects in oxidation kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Dynamic Mixing Behaviors of Ionically Tethered Polymer Canopy of Nanoscale Hybrid Materials in Fluids of Varying Physical and Chemical Properties

An emerging area of sustainable energy and environmental research is focused on the development of novel electrolytes that can increase the solubility of target species and improve subsequent reaction performance. Electrolytes with chemical and structural tunability have allowed for significant advancements in flow batteries and CO 2 conversion integrated with CO 2 capture. Liquid-like nanoparticle organic hybrid materials (NOHMs) are nanoscale fluids that are composed of inorganic nanocores and an ionically tethered polymeric canopy. NOHMs have been shown to exhibit enhanced conductivity making them promising for electrolyte applications, though they are often challenged by high viscosity in the neat state. In this study, a series of binary mixtures of NOHM-I-HPE with five different secondary fluids, water, chloroform, toluene, acetonitrile, and ethyl acetate, were prepared to reduce the fluid viscosity and investigate the effects of secondary fluid properties (e.g., hydrogen bonding ability, polarity, and molar volume) on their transport behaviors, including viscosity and diffusivity. We report our results revealed that the molecular ratio of secondary fluid to the ether groups of Jeffamine M2070 ($λ_{\text{SF}}$) was able to describe the effect that secondary fluid has on transport properties. Our findings also suggest that in solution, the Jeffamine M2070 molecules exist in different nanoscale environments, where some are more strongly associated with the nanoparticle surface than others, and the conformation of the polymer canopy was dependent on the secondary fluid. This understanding of the polymer conformation in NOHMs can allow for the better design of an electrolyte capable of capturing and releasing small gaseous or ionic species.

25 ENERGY STORAGE↗
DOE OSTI2022

Nonane and Hexanol Adsorption in the Lamellar Phase of a Nonionic Surfactant: Molecular Simulations and Comparison to Ideal Adsorbed Solution Theory

Adsorption of n-nonane/1-hexanol (C9/C6OH) mixtures into the lamellar phase formed by a 50/50 w/w triethylene glycol mono-n-decyl ether (C10E3)/water system was studied using configurational-bias Monte Carlo simulations in the osmotic Gibbs ensemble. The interactions were described by the Shinoda–Devane–Klein coarse-grained force field. Prior simulations probing single-component adsorption indicated that C9 molecules preferentially load near the center of the bilayer increasing the bilayer thickness, whereas C6OH molecules are more likely to be found near the interface of the polar and non-polar moieties swelling the bilayer in the lateral dimension. Here, we extend this work to binary C9/C6OH adsorption to probe whether the difference in the spatial preferences may lead to a synergistic effect and enhanced loadings for the mixture. Comparing loading trends and the thermodynamics of binary adsorption to unary adsorption reveals that C9–C9 interactions lead to the largest enhancement, whereas C9–C6OH and C6OH–C6OH interactions are less favorable for this bilayer system. As a result, ideal adsorbed solution theory yields satisfactory predictions of the binary loading.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Molecular Dynamics and Free Energy Calculations of Dicyclohexano-18-crown-6 Diastereoisomers with Sm 2+ , Eu 2+ , Dy 2+ , Yb 2+ , Cf 2+ , and Three Halide Salts in Tetrahydrofuran and Acetonitrile Using the AMOEBA Force Field

With the continual development of lanthanides (Ln) in current technological devices, an efficient separation process is needed that can recover greater amounts of these rare elements. Dicyclohexano-18-crown-6(DCH18C6) is a crown ether that may be a promising candidate for Ln separation, but additional research is required. As such, molecular dynamics(MD) simulations have been performed on four divalent lanthanide halide salts(Sm 2+ , Eu 2+ , Dy 2+ , and Yb 2+ ) and one divalent actinide halide salt (Cf 2+ ) bound to three diastereoisomers of DCH18C6. Dy 2+ , Yb 2+ , Cf 2+ , DCH18C6, and tetrahydrofuran (THF) solvent were parameterized for the AMOEBA polarizable force field for the first time, whereas existing parameters for Sm 2+ and Eu 2+ were utilized from our previous efforts. A coordination number (CN) of six for Ln 2+ /An 2+ –O solvated in THF indicated that the cations interacted almost entirely with the oxygens of the polyether ring. A CN of one for Ln 2+ /An 2+ -N solvated in acetonitrile for systems containing iodide suggested that theN atom of acetonitrile was competitive with I – for cation interactions. Fluctuation between five and six CNs for Dy 2+ and Yb 2+ suggested that although the cations remained in the polyether ring, the size of the ring may not be an ideal fit as these cations possess comparatively smaller ionic radii. Gibbs binding free energies of Sm 2+ in all DCH18C6 diastereoisomers solvated in THF were calculated. The binding free energy of the cis-syn-cis diastereoisomer was the most favorable, followed by cis-anti-cis, and then trans-anti-trans. Lastly, two major types of conformation were observed for each diastereoisomer that were related to the electrostatic interactions and charge density of the cations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Facile Decomposition of Organophosphonates by Dual Lewis Sites on a Fe 3 O 4 (111) Film

Dimethyl methylphosphonate (DMMP) is used as a simulant for toxic nerve agents and pesticides, rendering the understanding of surface chemistry requisite to design effective materials for organophosphonate (catalytic) decomposition at room temperature. In this work, DMMP surface chemistry is studied on an iron oxide surface in a very well-defined environment using temperature-programmed reaction, isotopic labeling, scanning tunneling microscopy, X-ray photoelectron spectroscopy, and density functional theory. DMMP, (CH 3 O) 2 P(O)(CH 3 ), dissociates to yield methoxy and methyl methylphosphonate, (CH 3 O)P(O) 2 (CH 3 ), on the surface at room temperature. At higher temperatures, dimethyl ether is formed via intramolecular reaction, followed by the formation of formaldehyde and methanol from adsorbed methoxy decomposition during temperature-programmed reaction. Ultimately, stochiometric combustion at 870 K produces CO, H 2 C=O, and CO 2 via reaction with lattice oxygen, with PO x remaining on the surface. Excess oxygen from the bulk is required to drive these higher temperature pathways. Neither hydrolysis nor a photoreaction is observed, when exposing the adsorbed DMMP to water or light above the band gap, respectively. No evolution of P-containing species is detected, indicating efficient trapping of this contaminant. The activity for DMMP decomposition at room temperature is reduced by the accumulation of PO x . However, a significant amount of reaction persists after multiple temperature-programmed reaction experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Investigation of Complex Intermediates in Solvent-Mediated Synthesis of Thiophosphate Solid-State Electrolytes

Lithium thiophosphates represent a promising class of solid Li + conductors for all-solid-state batteries. Scalable solvent-mediated synthesis routes for several Li–P–S ternary compounds have been reported, but little is known regarding the reaction mechanism of such pathways. This work demonstrates that solvent-mediated synthesis of lithium thiophosphate solid electrolytes from mixtures of Li 2 S and P 2 S 5 proceeds through a highly soluble P 2 S 6 2– intermediate. This intermediate exhibits virtually the same Raman spectra in several solvents including acetonitrile, methyl acetate, ethyl acetate, ethyl propionate, dimethoxyethane, tetraethylene glycol dimethyl ether, and tetrahydrofuran. Additionally, based on this universal intermediate, a general reaction mechanism is proposed for the solvent-mediated synthesis of several lithium thiophosphates including (LiPS 3 ) n , Li 2 P 2 S 6 , Li 7 P 3 S 11 , and Li 3 PS 4 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Probing Acid–Base Properties of Anatase TiO 2 Nanoparticles with Dominant {001} and {101} Facets Using Methanol Chemisorption and Surface Reactions

In the present study, we investigate the surface acid-base properties of anatase TiO 2 nanomaterials with dominant {101} and {001} facets via methanol titrations. Two anatase nanoparticles, TiO 2 (101) and TiO 2 (001), with well-defined morphology are prepared. TiO 2 (101) is predominantly enclosed by the {101} facets (> 90%), and TiO 2 (001) contains ~46% {001} facets and ~54% {101} facets. Upon adsorption of methanol 423 K, DRIFTS measurements show that both molecular and dissociative adsorption occurs on TiO 2 (101), while dissociative adsorption dominates on TiO 2 (001). During methanol TPD, TiO 2 (001) mainly generates acid-base product dimethyl ether and thermal cracking products CO and H 2 , as anticipated. In contrast, substantial amounts of formaldehyde and methane also desorb from TiO 2 (101), suggesting strong participation of surface defects (e.g., oxygen vacancies).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Probing Electrolyte Influence on CO 2 Reduction in Aprotic Solvents

Selective CO 2 capture and electrochemical conversion are important tools in the fight against climate change. Industrially, CO 2 is captured using a variety of aprotic solvents due to their high CO 2 solubility. However, most research efforts on electrochemical CO 2 conversion use aqueous media and are plagued by competing hydrogen evolution reaction (HER) from water breakdown. Fortunately, aprotic solvents can circumvent HER, making it important to develop strategies that enable integrated CO 2 capture and conversion. However, the influence of ion solvation and solvent selection within nonaqueous electrolytes for efficient and selective CO 2 reduction is unclear. In this work, we show that the bulk solvation behavior within the nonaqueous electrolyte can control the CO2 reduction reaction and product distribution occurring at the catalyst-electrolyte interface. We study different tetrabutylammonium (TBA) salts in two electrolyte systems with glyme ethers (e.g., 1,2 dimethoxyethane or DME) and dimethyl sulfoxide (DMSO) as a low and high dielectric constant medium, respectively. Using spectroscopic tools, we quantify the fraction of ion pairs that forms within the electrolyte. Also, we show how ion pair formation is prevalent in DME and is dependent on the anion type. More importantly, we show that as ion pair formation decreases within the electrolyte, CO 2 current densities increase, and a higher CO Faradaic efficiency is observed at low overpotentials. Meanwhile, in an electrolyte medium where the ion pair fraction does not change with the anion type (such as in DMSO), a smaller influence of solvation is observed on CO 2 current densities and product distribution. By directly coupling bulk solvation to interfacial reactions and product distribution, we showcase the importance and utility of controlling the reaction microenvironment in tuning the electrocatalytic reaction pathways. Insights gained from this work will enable novel electrolyte designs for efficient and selective CO 2 conversion to desired fuels and chemicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

New Insights into Nonthermal Plasma-Assisted Poly(vinyl alcohol) Depolymerization Catalyzed by TiO 2

Here, in this study, we investigated the solid residual poly(vinyl alcohol) (PVA) and TiO 2 after nonthermal air, CO 2 , and N 2 plasma depolymerization in the absence and presence of TiO 2 . Scanning electron microscopy studies showed the absence of highly viscous tar and carbonaceous residues on the surfaces of PVA and TiO 2 . In the absence of TiO 2 , PVA particles exhibited micron-sized holes on their surfaces, whereas in the presence of TiO 2 , the surface roughness of PVA particles was observed at the submicron scale. These observations suggest that TiO 2 facilitates the even distribution of nonthermal plasma at a submicron scale, leading to a more uniform depolymerization of PVA surfaces. Raman, Fourier transform infrared spectroscopy, and X-ray absorption spectroscopy showed that (i) the surface of residual PVA contains mainly ketone functional groups and less C-H bonds than the pristine PVA and (ii) further confirmed the absence of highly viscous tar and carbonaceous residues on both used TiO 2 and residual PVA. The nuclear magnetic resonance and mass spectroscopy suggested that the PVA is growing back to poly polyvinyl acetate by the esterification reaction, and the ethers are produced by the acetal reaction between PVA and aldehyde. The transmission electron microscopy and X-ray diffraction analysis indicated no major crystal structural change of the TiO 2 catalyst after the plasma reactions. This study demonstrates that nonthermal plasma-assisted depolymerization is a viable alternative to thermal depolymerization, offering the unique advantage of converting polymer wastes into gaseous small organic molecules without generating recalcitrant viscous tar and carbonaceous residues on the surfaces of the polymer and TiO 2 catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The Relationship between Ionic Conductivity and Solvation Structures of Localized High-Concentration Fluorinated Electrolytes for Lithium-Ion Batteries

Localized high concentration electrolyte (LHCE) combines a diluent with high concentration electrolyte (HCE), offering promising properties. The ions, solvent, and diluent interact to form a complex heterogenous liquid structure, where high salt concentration clusters are embedded in diluent. Optimizing LHCE for desired electrolyte properties like high ionic conductivity, low viscosity, effective solid electrolyte interphase (SEI) formability, within the vast chemical and compositional design space requires deeper understanding and theoretical guidance. For this work, we investigated the structures and conductivity of LHCEs based on a fluorinated solvent with two different diluents at varying concentrations. The 2,2,3,3-tetrafluoropropyl trifluoroacetate (TFPTFA) enters the solvation cluster due to its stronger Li-ion interactions, whereas 1,1,2,2-tetrafuoroethyl 2,2,2-trifuoroethyl ether (TFETFE) enters only at extremely high diluent concentrations. The ionic conductivity increases with decreasing diluent concentrations, with a slope change during cluster percolation. Overall, TFETFE demonstrates higher effectiveness than TFPTFA, forming higher local salt concentration clusters, and resulting in higher ionic conductivity.

cluster chemistry↗
DOE OSTI2025

Ultrafast Dynamics and Rearrangement of the EUV Photoacid Generator Phenyl Triflate

Extreme UV photolithography is a high-energy process crucial for modern computer chip fabrication, where photoacid generators (PAGs) enhance radiation exposure by producing reactive chemical species. This study investigates the ultrafast dissociative dynamics of phenyl triflate, a widely used PAG, under high-energy ionizing conditions. The dissociative ionization of the phenyl triflate cation, which includes a molecular rearrangement that releases SO 2 and forms the phenyl trifluoromethyl ether cation, is measured over the first 5 ps. These dynamics reveal vibrational coherence corresponding to a torsional mode of the cation, involving the twisting of the phenyl group into the O–S–C plane. Electronic structure calculations for the radical cation are in good agreement with the experimentally observed vibrational coherence. These findings provide valuable insights into the behavior of phenyl triflate under ionizing conditions similar to its industrial usage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Subnanometer Thick Native sp 2 Carbon on Oxidized Diamond Surfaces

Oxygen-terminated diamond has a wide breadth of applications, which include stabilizing near-surface color centers, semiconductor devices, and biological sensors. Despite the vast literature on characterizing functionalization groups on diamond, the chemical composition of the shallowest portion of the surface (<1 nm) is challenging to probe with conventional techniques like XPS and FTIR. In this work, we demonstrate the use of angleresolved XPS to probe the first ten nanometers of both oxygen and hydrogen terminated (100) single-crystalline diamond grown via chemical vapor deposition (CVD). With the use of consistent peakfitting methods, the peak identities and relative peak binding energies were identified for sp 2 carbon, ether, hydroxyl, carbonyl, and C−H groups for both of these diamond surface terminations. For the oxygen-terminated sample, we also quantified the thickness of the sp 2 carbon layer situated on top of the bulk sp 3 diamond bonded carbon to be 0.3 ± 0.1 nm, based on the analysis of the Auger electron spectra and D-parameter calculations. These results indicate that the majority of the oxygen is bonded to the sp 2 carbon layer on the diamond, and not directly to the sp 3 diamond bonded carbon.

Carbon↗
DOE OSTI2026

Charge Dependence of Local Hydration Dynamics in Poly(Acrylic Acid) Solutions

Localized measurements of hydration dynamics surrounding poly(acrylic acid) (pAA) chains are executed using Overhauser dynamic nuclear polarization relaxometry to determine the role of polymer protonation state on the polymer solvation environment. Alterations in polymer concentration and solution pH uncovered three different regimes of local water dynamics ranging from bulk-water-like to subdued water diffusivity. These experiments, combined with molecular dynamics simulations, reveal that the presence of deprotonated carboxylic acid groups promotes a hydrophilic local environment and extended polymer chain configurations that together incentivize the incorporation of bulk-like water near the polymer. This results in a stretched polymer conformation that leads to faster observed hydration dynamics in the local hydration environment. Meanwhile, protonated carboxylic acid groups are expected to engage in intrapolymer hydrogen bonding between monomer groups, resulting in a more collapsed conformation and slower observed hydration dynamics. The importance of the carboxylic acid groups on mediating hydration behavior is further illustrated by their role in dictating the solvation environment around poly(acrylic acid-stat-(poly(ethylene glycol) methyl ether acrylate) (p(AA-stat-PEGMEA)) copolymers with varying monomer ratios. Furthermore, these local hydration measurements establish a connection between local water dynamics and polymer chain conformation and may provide additional molecular perspective into poly(acrylic acid)’s classification as a superabsorbent polymer.

Conformation↗
DOE OSTI2021

Role of Molecular Architecture on Ion Transport in Ethylene oxide-Based Polymer Electrolytes

This work aims to develop a detailed mechanistic understanding of the role of a graft polymer architecture on lithium ion (Li + ) transport in poly(ethylene oxide)-based polymer electrolytes. Specifically, we compare Li + transport in poly-(ethylene oxide) (PEO) versus poly(oligo oxyethylene methacrylate) (POEM) polymers doped with lithium bis( trifluoromethanesulfonyl) (LiTFSI) salts, using both experimental electrochemical characterization and molecular dynamics (MD) simulations. Furthermore, our results indicate that POEM exhibits a range of relaxation processes that cannot be interpreted solely in terms of glass-transition temperature (T g ) effects. Due to its side-chain architecture, the segmental relaxation of POEM is nonuniform across ether oxygens (EOs) and shows a more pronounced sensitivity to temperature above T g compared to PEO. Moreover, POEM also exhibits a nonuniform Li + coordination behavior, in which Li + is primarily solvated by two different chains in POEM, compared to a single chain in PEO. Li + transport in POEM occurs via two events with distinct characteristic times: a fast intrachain hopping along side chains and a slow interchain hopping between side chains. Taken together, the relaxation processes and ion transport mechanisms identified in POEM provide useful insights into design of more effective solid polymer electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Self-Assembly of Partially Charged Diblock Copolymer-Homopolymer Ternary Blends

Ternary blends comprising of a diblock copolymer and the corresponding homopolymers provide ready access to a variety of morphologies, but the impact of charge on their phase behavior has not been studied extensively. Here, three partially charged ternary blends consisting of symmetric poly[(oligo(ethylene glycol) methyl ether methacrylate-co-oligo(ethylene glycol) propyl sodium sulfonate methacrylate)] (POEGMA#), polystyrene (PS), and POEGMA#-PS with different charge fractions were prepared, where # denotes the mole fraction of charged monomers in the POEGMA chain. Here, the phase behavior was systematically studied using small-angle X-ray scattering (SAXS), and isothermal phase diagrams at 120 °C were constructed. The resulting isothermal planes contain a wide lamellar (LAM) phase window with a slight deviation from symmetry for ion-containing ternary blends, due to the homopolymer size difference. Given the absence of any significant change in the phase diagrams as the charge fraction increases, the role of charge is primarily to increase the segregation strength in the ternary system, as in the case of partially charged diblock polymers. In addition, examination of the increase in domain size along the volumetrically symmetric isopleth reveals a “dry-brush” like swelling behavior of homopolymers in all three blends, presumably due to the space-filling nature of the oligomeric ethylene glycol side chains on POEGMA.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Mixed-Polarity Copolymers Based on Ethylene Oxide and Cyclic Carbonate: Insights into Li-Ion Solvation and Conductivity

Here, this study investigates the relationship between polarity and ionic conductivity in random and block copolymer electrolytes comprising highly flexible oligo(ethylene oxide) methyl ether methacrylate (OEM) and highly polar but glassy glycerol carbonate methacrylate (GCMA) monomers, blended with either lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) or lithium triflate. Interestingly, the high polarity of GCMA did not significantly enhance ionic dissociation, and the random copolymers (POEM-r-PGCMA) showed similar or lower ionic conductivities than the POEM homopolymer. Further analysis revealed that Li + only interacts with OEM and its counterion, not with GCMA. The less-intermixed and weakly phase-separated block copolymer (POEM-b-PGCMA) exhibited even lower conductivities than the random copolymer. Our results suggest that Li + solvation occurs only in the POEM-rich phase and that the larger PGCMA regions, depleted of Li + , disrupt long-range ion transport. These findings provide valuable insights into the design of polymer electrolytes and how segmental mobility and functional groups with contrasting polarities affect ion transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Role of Intra-Domain Heterogeneity on Ion and Polymer Dynamics in Block Polymer Electrolytes: An Approach for Spatially Resolving Dynamics and Ion Transport

The design of safe and high-performance, nanostructured, block polymer (BP) electrolytes for lithium-ion batteries requires a thorough understanding of the key parameters that govern local structure and dynamics. Yet, the interfaces between microphase separated domains can introduce complexities in this local behavior that can be challenging to quantify. Herein, the local polymer, cation (Li + ), and anion dynamics were described in salt-doped polystyrene block poly(oligo-oxyethylene methyl ether methacrylate) (PS-b-POEM) through a quantitative framework that considered the effects of polymer architecture, segmental mixing, chain stretching, and confinement on polymer mobility and ion transport. This framework was validated through nuclear magnetic resonance (NMR) spectroscopy measurements on solid (dry) polymer electrolyte samples. Notably, a mobility transition temperature (T mobility ) was identified through NMR spectroscopy that captured the local dynamics more accurately than the thermal glass transition temperature. Additionally, the approach quantitatively described the mobility gradient across a domain when segmental mixing effects were combined with chain stretching and confinement information, especially at higher segregation strengths – facilitating the assessment of local ion diffusion and conductivity. As a result, spatially averaged local ion diffusion predictions quantitatively matched NMR-measured ion diffusivities in the BP samples, while spatially summed ionic conductivity predictions across a domain qualitatively captured trends in the measured ionic conductivities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗