Search NASA⌕ Search

SEARCH · Search NASA

Results for “exposed”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

Ignition of Fuel Vapors Beneath Titanium Aircraft Skins Exposed to Lightning

Hot-spot and puncture ignition of fuel vapors by simulated lightning discharges was studied experimentally. The influences of skin coating, skin structure, discharge polarity, skin thickness, discharge current level, and current duration were measured and interpreted. Ignition thresholds are reported for titanium alloy constructed as sheets, sheets coated with sealants, and sandwich skins. Results indicated that the ignition threshold charge transfer for coated sheets, honeycomb, and truss skins is respectively about 200%, 400%, 800% that of bare alloy sheet of .102 cm (.040 in.)-thickness. It was found that hot-spot ignition can occur well after termination of the arc, and that sandwich materials allow ignition only if punctured.

Kosvic, T. C.↗
NASA NTRS1972

Neuropathological evaluation of monkeys exposed to body-alone X-radiation.

Investigation of the problem of whether morphological changes occurring in the central nervous system (CNS) following whole-body irradiation are attributable in part to abscopal factors. The 12 monkeys irradiated and the 6 that served as controls were chosen from a pool of 25 young monkeys. Over the postirradiation survival period of 14 days the hematocrit and hemoglobin values varied only slightly from the baseline values and from the values in the 6 control animals. White cell fractions were reduced in quantity but tended to recover relatively soon after irradiation. The design of this experiment was regarded as adequate to allow a conclusion whether pathological changes in the CNS of the irradiated animals differed from or exceeded those observed in the control animals. That such occurred on both counts in 3 of the 12 irradiated animals was evident. It appears that all the lesions must have been abscopally induced.

Haymaker, W.↗
NASA NTRS1973

Postflight analyses of Bacillus thuringiensis organisms exposed to space flight conditions

Cultures of B. thuringiensis returned from space flight appeared to be normal to slightly affected adversely in their ability to produce three toxins that affect insects. In addition, it can be stated that B. thuringiensis spores are very resistant to ultraviolet irradiation at the individual wavelengths and energy levels previously described. Full sunlight, however, does have a detrimental effect on the viability of B. thuringiensis spores.

Wrenn, R. T.↗
NASA NTRS1973

Optical stability of coatings exposed to four years space environment on OSO-III.

The Thermal Control Coatings Experiment flown on OSO 3 in the near-earth space environment was designed to measure changes in the solar absorptance and IR emittance of selected test coatings. The present work describes results obtained from four years in orbit. Changes in solar absorptance of the coatings are illustrated as a function of equivalent sun hours, and it is seen that five of eleven coatings considered exhibit no change in solar absorptance over four years or 7500 equivalent sun hours. The effects of micrometeoroids on polished metal surfaces are judged to be negligible for a near-earth mission of four years.

Millard, J. P.↗
NASA NTRS1974

Auger measurements on T-027 samples exposed during the Skylab 2 mission

Auger electron spectroscopy measurements performed on Skylab 2 indicate a low rate of deposition of permanent, continuous film contamination on nickel and gold surfaces positioned on the antisolar side of the spacecraft. These measurements and supportive evidence indicate that for the particular locations and orientations of these samples permanent films of less than 3 nm (30 A) thickness were deposited during an exposure of 40 hours at a temperature of approximately -32 C.

Peters, P. N.↗
NASA NTRS1974

Frequency response of an axial-flow compressor exposed to inlet pressure perturbations

Experimental results of a series of engine tests designed to obtain the stage dynamics of an eight-stage axial-flow compressor over the frequency range of 0.5 to 200 hertz are presented. The total pressure at the compressor face was varied by means of a secondary air jet system installed in the engine inlet and positioned to oppose the primary airflow. Total-pressure probes located at each compressor stage were used to obtain the frequency response of each compressor-stage total pressure to the average compressor-inlet total pressure. The engine operating conditions were chosen to illustrate the effects of changing the rotor speed, changing the exhaust nozzle area, and isolating the compressor discharge pressure perturbations from the fuel control and hence, the fuel flow.

Milner, E. J.↗
NASA NTRS1974

Observations on saccules of rats exposed to long-term hypergravity

The saccules of 15 centrifuged rats and 15 control rats were examined for morphological alterations resulting from long-term exposure to hypergravity. Minimal changes were found confined to the otolithic membrane. They were a slight decrease in the overall volume of otolithic membrane, a redistribution of otoconia in the direction of the gravitational force, and a more pronounced 'accessory' membrane. These changes were interpreted as purely mechanical effects of hypergravity, causing accelerated displacement of otoconia and subsequent entrapment of some of them on inferior portions of the primary otolithic membrane and 'accessory' membrane.

Lim, D. J.↗
NASA NTRS1974

A study of the diffusional behavior of a two-phase metal matrix composite exposed to a high temperature environment

The progress of diffusion-controlled filament-matrix interaction in a metal matrix composite where the filaments and matrix comprise a two-phase binary alloy system was studied by mathematically modeling compositional changes resulting from prolonged elevated temperature exposure. The analysis treats a finite, diffusion-controlled, two-phase moving-interface problem by means of a variable-grid finite-difference technique. The Ni-W system was selected as an example system. Modeling was carried out for the 1000 to 1200 C temperature range for unidirectional composites containing from 6 to 40 volume percent tungsten filaments in a Ni matrix. The results are displayed to show both the change in filament diameter and matrix composition as a function of exposure time. Compositional profiles produced between first and second nearest neighbor filaments were calculated by superposition of finite-difference solutions of the diffusion equations.

Tenney, D. R.↗
NASA NTRS1975

Regulation of body mass in rats exposed to chronic acceleration

Female rats approximately 6 mo old were chronically centrifuged for up to 30 days at 2.76 G or 3.18 G and sacrificed at intervals for body-composition study. Both fat and the fat-free body mass (FFBM) were reduced during the 1st wk of centrifugation, with the fat showing considerably more variation both within and between groups. The FFBM was reduced below control level to the same extent in rats fed commercial chow, a high-fat diet, or a high-protein diet or in rats prefasted to produce a body-mass deficit at the start of centrifugation. There were no centrifugation-associated changes in body water content. It was concluded that body fat showed no evidence of regulation, FFBM is regulated at any constant level of acceleration between 1 and 4.15 G, and the change in FFBM induced by a change in acceleration is probably not regulated.

Pitts, G. C.↗
NASA NTRS1976

Assessment of mapping exposed ferrous and ferric iron compounds using Skylab-EREP data

The author has identified the following significant results. The S190B color photography is as useful as LANDSAT data for the mapping of color differences in the rocks and soils of the terrain. An S192 ratio of 0.79 - 0.89 and 0.93 - 1.05 micron bands produced an apparently successful delineation of ferrous, ferric, and other materials, in agreement with theory and ratio code studies. From an analysis of S191 data, basalt and dacite were separated on the basis of differences in spectral emissivity in the 8.3 - 12 micron region.

Vincent, R.↗