Search NASA⌕ Search

SEARCH · Search NASA

Results for “fabricated”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

AOI [1]: Passive Wireless Sensor Systems Fabricated by Direct-Writing for Temperature and Health Monitoring of Energy Systems in Harsh-Environments (Final Report)

Researchers at West Virginia University (WVU) propose to demonstrate a wireless, high-temperature sensor system for monitoring the temperature and health of energy-system components. The active sensor and electronics for wireless communication will be composed entirely of an electroceramic materials (conductive ceramics) which are capable of withstanding the harsh-environments required for fossil energy-based technologies. This work will focus primarily on the fabrication and testing of temperature (thermocouples and thermistors) and health (strain/stress and crack propagation sensors) that function at extreme temperatures (up to 700-1700ºC). The electronics will accompany the high-temperature sensor, which will include a passive wireless communication circuit that allows the transmission of the data based on the LCR resonance principle to a near-by reader antenna. This passive transmission of data will reduce the need for interconnect wires near the active, and possibly rotating, energy-system component. The research will include process development to permit the 2D/3D direct-writing of the entire sensor and communication circuit onto the energy-system component. The direct-writing will be facilitated by using silicon-based polymer-derived precursors to form the high-temperature, stable electroceramic compositions. In addition, methods for direct-writing the circuit onto a fugitive carrier substrate will be completed, which will permit a “peel-and-stick”-like transfer of the sensor circuit to the energy-system component. This feature will allow the economical and precise placement of the sensor circuit onto components of various shapes and locations, without altering the geometry and active features of the manufactured component, or the removal (or decommissioning) of the component for installation. The proposed work will be directed at the following areas: 1) Investigation of phase formation, sintering/grain growth, and electrical properties of polymer-derived electroceramic composites; 2) Definition of processes to direct-write through ink-jet and robo-casting the polymer-derived electroceramic composites onto oxide and polymer surfaces; 3) Development of methods to form monolithic "peel-and-stick" preforms that will efficiently transfer the sensor circuit to ceramic surfaces after thermal treatment; 4) Design of passive wireless LCR circuits and receiver (reader) antennas for communication and testing at high temperatures; 5) Investigation of the passive wireless sensor system developed (and method of transferring sensor system) for temperature and stress/strain measurements on a SOFC repeat unit and a singular gas turbine blade prototype as example applications.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

Fused Filament Fabrication of Polycarbonate in a Reactive Atmosphere

Fused Filament Fabrication (FFF) has become extremely useful in various industries, particularly when complex parts are needed in low volumes. However, the material properties available in FFF polymers are limited in scope. The properties of a FFF part can be changed in multiple ways. This study explores changing the bulk properties of a part by affecting each layer as it prints. Prior work has demonstrated the feasibility of altering polymer properties by layerwise exposure to a liquid chemical, but properties have never been modified in situ using a reactive gas. Here, FFF is done in the presence of a reactive gas. Specifically, the part is printed with polycarbonate in a reactive atmosphere of ozone and ultra-violet light. It was found that as each layer is exposed to a reactive gas, the bulk properties of the part change. A visual chemical change was seen, as well as confirmation of the reaction through Fourier transform infrared spectroscopy attenuated total reflectance. The change in mechanical properties was measured through Dynamic Mechanical Analysis shear tests, showing a bulk change can be efficiently produced through FFF in a reactive atmosphere.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Fabrication and Irradiation Behavior of Thulium Sesquioxide

The results of reactor irradiation of thulium sesquioxide are discussed, along with chemical and physical properties and wafer fabrication. Sintered densities up to 90% of theoretical were obtained in target wafers using oxide reprocessed to obtain readily sinterable powder. Irradiation to about 1.8 w/g did not change the microstructure of the wafers although some wafers broke, probably because of mechanical stresses in target and disassembly.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Parallel-Plate Avalanche Counter (PPAC) Fabrication for 240 Pu PFNS Measurement [Slides]

A LANL-LLNL joint program has been developed successfully to measure PFNS and established the most precisely determined $\chi$ matrices for 235,238 U and 239 Pu. It has been extended to 240 Pu now and possibly to 233 U in the future. An alternative method was developed to fabricate 240 Pu and a total of 12 targets were made with a total mass of 17.9 mg. The PFNS measurement for 240 Pu will begin in June, 2022 when the new beam cycle starts and the data analysis follows immediately afterward.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Fabrication and Characterization of Single-Particle Compacts

The programmatic objective of the advanced low enriched uranium (aLEU) fuel Project within the Office of Nonproliferation Research and Development (NA-22) is to advance the development of nuclear reactor designs, fuel materials, and fabrication technologies capable of meeting a number of challenging customer requirements, including reactor stability, extended lifetime, and power density without refueling, while using only low-enriched uranium (i.e., less than 20% enrichment of 235 U). The tandem requirements of delivering sufficient power density and maintaining fuel performance over the course of a multidecade fuel lifetime tightly constrain the field of potential fuel options. Monolithic fuel forms (e.g., fuel pellets) provide maximized density of fissile material, but they may face challenges in maintaining their structure and performance over the long reactor lifetimes envisioned in this program. Dispersion fuel forms with an inert matrix provide enhanced long-term stability but sacrifice fissile material density, and they may not provide sufficient power density over the reactor lifetime with the limit of low enrichment.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

94ND10 Intergranular Phase Analysis and Fabrication

The composition and phase fraction of the intergranular phase of 94ND10 ceramic is determined and fabricated ex situ. The fraction of each phase is 85.96 vol% Al 2 O 3 bulk phase, 9.46 vol% Mg-rich intergranular phase, 4.36 vol% Ca/Si-rich intergranular phase, and 0.22 vol% voids. The Ca/Si-rich phase consists of 0.628 at% Mg, 12.59 at% Si, 10.24 at% Ca, 17.23 at% Al, and balance O. The Mgrich phase consists of 14.17 at% Mg, 0.066 at% Si, 0.047 at% Ca, 28.69 at% Al, and balance O. XRD of the ex situ intergranular material made by mixed oxides consisting of the above phase and element fractions yielded 92 vol% MgAl 2 O 4 phase and 8 vol% CaAl 2 Si 2 O 8 phase. The formation of MgAl 2 O 4 phase is consistent with prior XRD of 94ND10, while the CaAl 2 Si 2 O 8 phase may exist in 94ND10 but at a concentration not readily detected with XRD. The MgAl 2 O 4 and CaAl 2 Si 2 O 8 phases determined from XRD are expected to have the elemental compositions for the Mg-rich and Ca/Si-rich phases above by cation substitutions (e.g., some Mg substituted for by Ca in the Mg-rich phase) and impurity phases not detectable with XRD.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Metallization of 3D Printed Parts for Electrode Fabrication

Additive manufacturing has the potential to fabricate electrodes with extremely small features with control of the electrode structure. However, most of the 3D printing capabilities produce structures made of polymers rather than electrodes which much be metal. This work aims to compare methods of metallization for parts created with additive manufacturing to allow them to be used as electrodes. We used three different methods of metallization: layer-by-layer gold nanoparticle coating, electroless copper deposition, and a combination of the two. We measured the resistance of the samples and observed the uniformity of the coating. We find that the standard electroless deposition procedure and using the layer-by-layer gold as a pretreatment yield similar resistances of less than 1 Ω. However, using gold as a pretreatment has possible cost benefits as compared to the standard electroless deposition procedure. Therefore, if many samples over a long period of time need to be metallized, we recommend using the layer-by-layer process combined with copper electroless deposition.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Improving Economics of Generation 3 CSP System Components Through Fabrication and Application of High Temperature Nickel-Based Alloys

To improve the efficiency and lower the cost of Concentrating Solar Power (CSP) plants, new Generation 3 ‘Gen 3’ CSP concepts using novel salts, solids, or gas heattransfer media envisaged to integrated with a supercritical CO 2 (sCO 2 ) power block at temperatures >715ºC are being investigated. Regardless of the specific pathway, critical components including receivers, piping, and heat-exchangers (HXs) will require the use of heat-resistant nickel-based alloys. Furthermore, the use of age-hardenable alloys, such as INCONEL® alloy 740H® (alloy 740H) may be needed to reduce capital cost. The unique challenges presented by CSP plants to material manufacture, such as small diameter thin-walled tubing in receivers, large diameter thin wall piping, and thin sheet and tubes for HXs can add to the cost to produce such alloys when compared to traditional wrought and cast processing. The goal of this project was to facilitate a reduction of plant cost by developing alternate manufacturing routes and quantifying the performance and economic benefits for alloy 740H in comparison to other candidate nickel-based alloys through fabrication trials, high-temperature mechanical property studies, and interactions with technology developers and codes and standards.

14 SOLAR ENERGY↗
DOE OSTI2021

The Elevated-Temperature Cyclic Properties of Alloy 316H Fabricated by Powder Metallurgy Hot Isostatic Pressing (Rev.1)

Powder metallurgy hot isostatic pressing (PM HIP), an advanced manufacturing technique, is viewed by the Department of Energy as a “transformational technology” for heavy section manufacturing of nuclear components. Although PM HIP is a mature technology, it has not been qualified in Section III, Division 5 for elevated-temperature nuclear construction. This work seeks to demonstrate a PM HIP qualification method for elevated-temperature nuclear construction that is based on allowable material characteristics. Specifically, the elevated-temperature cyclic properties of PM HIP 316H are investigated. The creep-fatigue properties of PM HIP 316H are significantly degraded compared to those of wrought. Current PM HIP practices are not able to fabricate elevated-temperature nuclear components with creep-fatigue properties that are equivalent to or better than traditional wrought components. A research and development program is proposed for qualifying PM HIP 316H for elevated-temperature nuclear construction.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Coal-based Bricks & Blocks (CBBs): Process Development to Prototype Fabrication Coupled with Techno-Economic Analysis and Market Survey

The decline of coal use for energy production provides an abundance of local feedstock for new innovative uses and value-added products. Expanding the U.S. coal-value chain to manufacture high-value carbon products can strengthen the nation’s energy and mineral security, enhance the U.S. national defense security, increase the United States’ economic prosperity, while achieving U.S. environmental objectives. The primary project goal is a relatively light-weight composite product with superior (or comparable) compressive strength. Both virgin and, where available, post-consumer recycled thermoplastic versions are tested for each thermoplastic species. A useful attribute of thermoplastics as binders is that they can be heated to their melting point, cooled, and reheated again without significant degradation. A key advantage of thermoset CBBs is that they require only mixing and molding. CBB advantages include low cost, availability, binding ability and processability. Coal-based bricks and blocks (CBBs) weigh about 50% less than clay bricks and can be manufactured with an interlocking design to promote ease of use for the novice builder. CBB formulation is evaluated according to a design-of-experiments (DoE) approach. DoE variables are a) relative weight fractions of binder, b) relative proportions of large versus small (milled) anthracite size fractions, and c) additive percentage. Fabrication methods include hot-press molding and extrusion, the later being the most commercially viable. CBBs are tested for compressive strength, modulus of rupture (by flexure test) and water absorption per ASTM C67, with density determined by the Archimedes drainage method. Fractured interfaces are examined by SEM (Scanning Electron Microscopy) to resolve fracture dynamics and interior microstructure uniformity. Differential scanning calorimetry (DSC) is used to compare plastic transition temperatures i.e., glass and melting temperatures to contrast virgin with post-consumer recycled thermoplastics and optimize their usage. These results are used in the DoE analysis to identify the binder and relative weight percentages for optimum strength, density, and porosity. Overall, CBBs possess strength comparable to clay-based bricks but are non-permeable and hydrophobic, and hence resistant to degradation by freeze-fracturing, corrosion, and efflorescence. The strongest composites have been made with the following thermoplastic binders (in order of strength): thermoset, high-density polyethylene crosslink resin, high-density polyethylene, nylon 6/6, and polypropylene. Results from a techno-economic analysis TEA show economy of scale for CBBs by modularization and reveal the binder as the cost driver for material costs. Ideally, the incorporation of post-consumer recycled thermoplastic will decrease material acquisition costs and increase product sustainability. Notably, CBBs do not require the high temperature calcination needed to produce cement, nor do they require firing in the 1600-2400 °F range for three days using natural gas, as do clay brick equivalents. Instead, CBBs are heated to a modest <600 °F according to the melt flow index of the thermoplastic binder. Existing anthracite mines can be expanded to produce CBBs to reduce aggregate transportation costs and emissions that exist for clay bricks. TEA reflects this reduced energy cost while a comparative CO2 emission analysis quantifies the reduced environmental footprint. The market survey identifies several commercialization opportunities, dependent upon the brick classification.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2023

Coal-based Bricks & Blocks (CBBs): Process Development to Prototype Fabrication Coupled with Techno-Economic Analysis and Market Survey

Coal-based bricks and blocks (CBBs) were formulated using anthracite and thermoplastic binder. Lab scale test composites were formed by hot-press molding and commercial extrusion for test articles and for a full-scale prototype. Formulations and test matrices followed a systematic experimental design to examine the effects of and interactions among three primary independent variables: a) thermoplastic type, b) weight fractions of binder relative to the total anthracite weight, and c) relative proportions of large versus small (milled) anthracite size fractions. Technical performance metrics include compressive strength, modulus, porosity/permeability and density. These DoE studies establish composition-property relations and identify the best combination for any desired property of interest – in particular, strength. Based on CBB composition and fabrication process, validated against technical performance metrics, a techno-economic analysis was constructed which incorporated a process flow model, engineering design (with scaling), and calculated capital plus operating costs. Based on measured property metrics and estimated process economics and a projected price by TEA (techno-economic analysis), building and construction target markets were identified by a market survey assessment. With known cost, price, performance metrics and competitive advantages for CBBs matched with commercial applications/uses, a technical gap analysis was performed to identify further development required for scale-up and commercialization.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

Accelerated Scaling to Rapid Open-Air Fabrication of Durable Perovskite Solar Modules

The goals of this SETO project (DE-EE0008559, Accelerated Scaling to Rapid Open-Air Fabrication of Durable Perovskite Solar modules) are to address the principal challenges towards the successful commercialization of perovskite solar modules utilizing scalable, high-throughput open-air spray deposition. The successful outcome of the project will provide the foundation of an all open-air spray deposited perovskite solar module with hole transport layer (HTL), perovskite, electron transport layer (ETL), and barrier layer development while establishing a fundamental understanding of perovskite device behavior under accelerated aging conditions. Through this program, we have made significant progress towards a commercializable pathway for perovskites. (1) We’ve demonstrated the successful open-air deposition of perovskite and transport layer materials. These deposition methods were chosen for their inherent scalability, and open-air processing enables a significant reduction in processing costs. These methods are also compatible with high throughputs, demonstrating the fastest perovskite film deposition at these performance levels. (2) Development of a unique all-fiber laser scribing procedure provides a high-performance, low-cost method for further improvements in scalability. (3) Our group has also placed a unique emphasis on device stability. The development of testing standards for perovskite modules is required to thoroughly evaluate potential candidates for commercialization, and we’ve taken inspiration from current industry standards to provide an honest insight into the performance and reliability of our devices. (4) An extensive cost model detailing the specific contributions of each device layer and production component provides the most thorough evaluation of any perovskite technology against conventional silicon and compound semiconductor solar devices. The cost model is a critical advancement that will provide the foundation for evaluating the levelized cost of energy (LCOE) of this technology.

14 SOLAR ENERGY↗
DOE OSTI2024

Advanced Fabrication Techniques of Metal Hydrides for Science and Technology Applications (Abbreviated Final Report)

Lithium Hydride (LiH) atomic properties make it an excellent candidate for thermal energy storage, hydrogen storage, and nuclear reactor technology. High Energy Density (HED) experiments on LiH at the National Ignition Facility (NIF) can also provide critical Equation of State (EOS) and Hugoniot data. Density requirements for LiH vary per application and therefore physical and structural requirements for LiH are non-uniform. Historical production of LiH relies on casting processesthat are limited by density and grain-size control, which leads to unfavorable machinable characteristics. LiH manufacturing is further hindered due to its chemical reactivity and propensity to readily react with moisture. This work aimed at exploring advanced fabrication techniques for LiH such as 1) uniaxial powder pressing methods and 2) laser powder bed fusion (L-PBF) additive manufacturing. Uniaxial powder compaction offers advantageous tailorable mechanical and physical properties via density control, and L-PBF can produce net-shaped complex parts with unique microstructure. Uniaxial pressing proved successful in readily producing LiH with density control.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Advanced Fabrication Techniques of Metal Hydrides for Science and Technology Applications (Full Technical Report)

Lithium Hydride (LiH) atomic properties make it an excellent candidate for thermal energy storage, hydrogen storage, and nuclear reactor technology. High Energy Density (HED) experiments on LiH at the National Ignition Facility (NIF) can also provide critical Equation of State (EOS) and Hugoniot data. Density requirements for LiH vary per application and therefore physical and structural requirements for LiH are non-uniform. Historical production of LiH relies on casting processes that are limited by density and grain-size control, which leads to unfavorable machinable characteristics. LiH manufacturing is further hindered due to its chemical reactivity and propensity to readily react with moisture. This work aimed at exploring advanced fabrication techniques for LiH such as 1) uniaxial powder pressing methods and 2) laser powder bed fusion (L-PBF) additive manufacturing. Uniaxial powder compaction offers advantageous tailorable mechanical and physical properties via density control, and L-PBF can produce net-shaped complex parts with unique microstructure. Uniaxial pressing proved successful in readily producing LiH with density control.

36 MATERIALS SCIENCE↗