Search NASA⌕ Search

SEARCH · Search NASA

Results for “faster”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Keggin polyoxometalates based hybrid compounds containing helix/nanocages for colorimetric biosensing

Highlights: • Two new Keggin polyoxometalates (POMs) based hybrid compounds containing helix/nanocages are reported. • Compounds 1 and 2 both exhibit higher peroxidase-like activities and broader applications range than other POMs involved peroxidase-like mimics. • Compounds 1 and 2 both exhibit faster respond time and lower detection limit than other POMs involved peroxidase-like mimics. - Abstract: Two Keggin polyoxometalate (POMs) based hybrid compounds containing helix/nanocages as peroxidase-like mimics have been synthesized and structurally characterized. Single crystal X-ray diffraction analysis reveals that compound 1 exhibits a POM-pillared framework with open nanotube channels (ca. 5.6 × 5.8 Å{sup 2}), in which SiW{sub 12} polyanions are sandwiched between the adjacent Cu-fkz sheets with meso-helix. And an unprecedented twisted octahedral hexamer nanocage (ca. 10 × 10 Å{sup 2}) is observed in compound 2. Compared with the other POMs involved peroxidase-like mimics, both compounds 1 and 2 exhibit higher peroxidase-like catalytic activities, broader applications range, faster respond time and lower detection limit, which maybe attribute to the maximized synergistic effects of SiW{sub 12} clusters, fkz molecules, metal ions and the distinct structure. Based on the facts, compounds 1 and 2 as enzyme mimics might expand their application around physiological pH conditions, and can be used as one kind of effective probe to detect H{sub 2}O{sub 2} in live organism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In situ TEM and synchrotron characterization of U–10Mo thin specimen annealed at the fast reactor temperature regime

U–Mo metallic alloys have been extensively used for the Reduced Enrichment for Research and Test Reactors (RERTR) program, which is now known as the Office of Material Management and Minimization under the Conversion Program. This fuel form has also recently been proposed as fast reactor metallic fuels in the recent DOE Ultra-high Burnup Fast Reactor project. In order to better understand the behavior of U–10Mo fuels within the fast reactor temperature regime, a series of annealing and characterization experiments have been performed. Annealing experiments were performed in situ at the Intermediate Voltage Electron Microscope (IVEM-Tandem) facility at Argonne National Laboratory (ANL). An electro-polished U–10Mo alloy fuel specimen was annealed in situ up to 700 °C. At an elevated temperature of about 540 °C, the U–10Mo specimen underwent a relatively slow microstructure transition. Nano-sized grains were observed to emerge near the surface. At the end temperature of 700 °C, the near-surface microstructure had evolved to a nano-crystalline state. In order to clarify the nature of the observed microstructure, Laue diffraction and powder diffraction experiments were carried out at beam line 34-ID of the Advanced Photon Source (APS) at ANL. Phases present in the as-annealed specimen were identified with both Laue diffraction and powder diffraction techniques. The U–10Mo was found to recrystallize due to thermally-induced recrystallization driven by a high density of pre-existing dislocations. A separate in situ annealing experiment was carried out with a Focused Ion Beam processed (FIB) specimen. A similar microstructure transition occurred at a lower temperature of about 460 °C with a much faster transition rate compared to the electro-polished specimen. - Highlights: • TEM annealing experiments were performed in situ at the IVEM facility up to fast reactor temperature. • At 540 °C, the U-10Mo specimen underwent a slow microstructure transition where nano-sized grains were observed to emerge. • UO{sub 2} phase exists at the thin area of the as-annealed specimen whereas U-10Mo γ phase dominated at the thicker part. • Bcc γ U-10Mo recrystallized to become nano-meter sized crystallites near the specimen surface. • A separateannealing experiment was conducted with a FIB processed specimen where similar transition occurred at a lower temperature of 460 °C with a faster rate.

36 MATERIALS SCIENCE↗

Identification of sigma and chi phases in duplex stainless steels

The aim of this work is to find out the most suitable method for detecting and analyzing accurately the formation conditions of secondary phases, particularly Sigma-phase (σ-phase) and Chi-phase (χ-phase) in duplex stainless steels (UNS S32205 and UNS S32750). The microstructure was characterized after a solution annealing at 1080 °C followed by an isothermal heating at 830 °C for different time ranges, ranging from 1 min to 9 h, in order to enlighten the controversial point concerning the mechanism of χ-phase nucleation in relation with the σ-phase. Etched samples were observed using optical microscopy (MO), and scanning electron microscopy (FESEM) with a backscattered electron detector (BSE) was used on unetched samples. Compositional microanalysis (EDS) was carried out for identifying the different phases present in the steels. Sigma phase was easily observed using different etching procedures, whereas χ-phase was only clearly detected with FESEM–BSE on unetched samples. The compositional analyses showed that the molybdenum content in χ-phase almost doubles the content of this element in σ-phase, and as a result the kinetics of nucleation and growth were also found to be remarkably faster when the alloy content in the steel is higher. In addition, chromium nitrides and carbides were also observed to precipitate as a result of the heat treatments and, in the case of the chromium nitrides, they act as a favorable site for the nucleation of σ-phase and χ-phase. - Highlights: • Microscopy was used on heat treated duplex steels for microstructure identification. • FESEM–BSE observation on unetched samples provided the best contrast between phases. • Analyses of carbides, nitrides, chi and sigma phases were possible by EDS and WDS. • Chromium nitrides act as favorable site for the nucleation of chi and sigma phases. • Secondary phases nucleation kinetics are faster in superduplex than in duplex steels.

36 MATERIALS SCIENCE↗

Fission gas bubble identification using MATLAB's image processing toolbox

Automated image processing routines have the potential to aid in the fuel performance evaluation process by eliminating bias in human judgment that may vary from person-to-person or sample-to-sample. This study presents several MATLAB based image analysis routines designed for fission gas void identification in post-irradiation examination of uranium molybdenum (U–Mo) monolithic-type plate fuels. Frequency domain filtration, enlisted as a pre-processing technique, can eliminate artifacts from the image without compromising the critical features of interest. This process is coupled with a bilateral filter, an edge-preserving noise removal technique aimed at preparing the image for optimal segmentation. Adaptive thresholding proved to be the most consistent gray-level feature segmentation technique for U–Mo fuel microstructures. The Sauvola adaptive threshold technique segments the image based on histogram weighting factors in stable contrast regions and local statistics in variable contrast regions. Once all processing is complete, the algorithm outputs the total fission gas void count, the mean void size, and the average porosity. The final results demonstrate an ability to extract fission gas void morphological data faster, more consistently, and at least as accurately as manual segmentation methods. - Highlights: •Automated image processing can aid in the fuel qualification process. •Routines are developed to characterize fission gas bubbles in irradiated U–Mo fuel. •Frequency domain filtration effectively eliminates FIB curtaining artifacts. •Adaptive thresholding proved to be the most accurate segmentation method. •The techniques established are ready to be applied to large scale data extraction testing.

36 MATERIALS SCIENCE↗

Effect of quenching rate on the microstructure and mechanical behavior of Ce75Al21Ga4 glassy alloy

Highlights: • Structural and microstructural changes with respect to quenching rate have been reported. • Ribbons synthesized at slow cooling rate shows higher hardness and yield strength. • Study is focused on the correlation between quenching rate and mechanical behavior. • Metallic glass synthesized at faster quenching rate contains the highest shear band density. - Abstract: The present study deals with the structural and microstructural changes with respect to the quenching rate and their correlation with mechanical behavior of melt-spun Ce{sub 75}Al{sub 21}Ga{sub 4} glassy alloys. The ribbons of the alloy have been synthesized at different quenching rates obtained through different wheel speeds (44, 36, 29, 22 and 15 m/s). The glass forming indicators and mechanical properties have been investigated at different quenching rates. The higher quenching rate obtained through high wheel speed (44, 36 and 29 m/s) has led to phase separation giving rise to nano-amorphous domains in a glassy matrix while the lower quenching rate obtained through lower wheel speed (22 and 15 m/s) produces nano-crystalline grains with size ranges from 25 ± 1 to 120 ± 1 nm. It has been found that the size of the nano-amorphous domains decreases with decrease in wheel speed. The mechanical behavior has been studied using micro-indentation technique. The indentation test indicates that with the same chemical composition, the ribbons synthesized at slow quenching rate exhibits higher hardness and yield strength than those synthesized at faster quenching rate. The ribbons synthesized at 44 m/s contains the large free volume and has the highest shear band density.

36 MATERIALS SCIENCE↗

Effect of as-cast microstructure heterogeneity on aging behavior of a high-pressure die-cast A380 alloy

Highlights: • The surface layer hardened much faster than the central region during age. • More quantity of finer precipitates was found in the surface layer during age. • The surface layer had a lower activation energy of precipitation. • Si promoted the precipitation via inducing dislocations in matrix. - Abstract: Microstructure and hardness evolution of a vacuum-assistant die-cast A380 alloy during heat treatment were investigated. Both surface layer and central region of the casting component were analyzed in die-cast state, solutionized state and artificial age state. During the artificial age, the surface layer hardened more significantly than the central region due to faster precipitation and more refined hardening phases in the surface layer. Detailed analysis on the macro-segregation, microstructure morphology and grain size revealed that the different aging behaviors exhibiting in the surface and the central region were mainly attributed to a combining effect of the enrichment of Si and Cu at the surface layer, the fully-divorced morphology of eutectic in die-cast microstructure, and the presence of the externally solidified crystals at the central region. The presence of the Si particles, which exhibited quite different thermal expansion properties, changed the density and the distribution of the dislocations in the α-Al matrix, and consequently changed the precipitation of the hardening phases.

36 MATERIALS SCIENCE↗

Effect of in-situ (TiC-TiB2) reinforcement on aging and mechanical behavior of AZ91 magnesium matrix composite

Highlights: • Effect of TiC-TiB{sub 2} particles on precipitation behavior of in-situ composite was studied. • The age-hardening rate of in-situ composites is faster than that of alloy. • Faster age hardening rate is due to the presence of high dislocation density in composite. • Post aging treatment improved the mechanical properties of both base and composite. - Abstract: In the present work, influence of in-situ TiC-TiB{sub 2} reinforcement on age hardening behavior and mechanical properties of TiC-TiB{sub 2}/AZ91 composite was investigated. The base and in-situ composite materials were solution treated at 400 °C for 24 h and then aged at different temperatures up to 100 h. The kinetics of age hardening results revealed that the addition of in-situ TiC-TiB{sub 2} reinforcement increase the age hardening kinetics of the composite as compared to AZ91 magnesium alloy. The improvement in age hardening kinetics is attributed to the presence of high dislocation density resulted from the mismatch of coefficients of thermal expansion between in-situ TiC-TiB{sub 2} reinforcement and magnesium matrix. The precipitation behavior of Mg{sub 17}Al{sub 12} phase in both AZ91 alloy and TiC-TiB{sub 2}/AZ91 composites were established. After age hardening, base and in-situ composite materials show significant improvement in ultimate tensile strength by 47.72% and 66.49% respectively as compared with the base monolithic alloy. The enhancement of mechanical properties in the base and in-situ composites is explained in detail by analyzing their fractographs and microstructures.

36 MATERIALS SCIENCE↗

Synthesis and characterization of pyrite (FeS{sub 2}) using microwave irradiation

A procedure using microwave irradiation was studied to develop a fast and reliable method for synthesizing pyrite. Pyrite was successfully synthesized within a few minutes via reaction of ferric iron and hydrogen sulfide under the influence of irradiation by a conventional microwave oven. The SEM-EDX study revealed that the nucleation and growth of pyrite occurred on the surface of elemental sulfur, where polysulfides are available. Compared to conventional heating, using microwave energy results in rapid (<1 min) formation of smaller particulates of pyrite. Higher levels of microwave power can form pyrite even faster, but faster reaction can lead to the formation of pyrite with defects.

36 MATERIALS SCIENCE↗

Solution precursor plasma deposition of nanostructured ZnO coatings

Highlights: {yields} The solution precursor route employed is an inexpensive process with capability to produce large scale coatings at fast rates on mass scale production. {yields} It is highly capable of developing tailorable nanostructures. {yields} This technique can be employed to spray the coatings on any kind of substrates including polymers. {yields} The ZnO coatings developed via solution precursor plasma spray process have good electrical conductivity and reflectivity properties in spite of possessing large amount of particulate boundaries, porosity and nanostructured grains. -- Abstract: Zinc oxide (ZnO) is a wide band gap semiconducting material that has various applications including optical, electronic, biomedical and corrosion protection. It is usually synthesized via processing routes, such as vapor deposition techniques, sol-gel, spray pyrolysis and thermal spray of pre-synthesized ZnO powders. Cheaper and faster synthesis techniques are of technological importance due to increased demand in alternative energy applications. Here, we report synthesis of nanostructured ZnO coatings directly from a solution precursor in a single step using plasma spray technique. Nanostructured ZnO coatings were deposited from the solution precursor prepared using zinc acetate and water/isopropanol. An axial liquid atomizer was employed in a DC plasma spray torch to create fine droplets of precursor for faster thermal treatment in the plasma plume to form ZnO. Microstructures of coatings revealed ultrafine particulate agglomerates. X-ray diffraction confirmed polycrystalline nature and hexagonal Wurtzite crystal structure of the coatings. Transmission electron microscopy studies showed fine grains in the range of 10-40 nm. Observed optical transmittance ({approx}65-80%) and reflectivity ({approx}65-70%) in the visible spectrum, and electrical resistivity (48.5-50.1 m{Omega} cm) of ZnO coatings are attributed to ultrafine particulate morphology of the coatings.

36 MATERIALS SCIENCE↗

In situ synthesis of magnesium-substituted biphasic calcium phosphate and in vitro biodegradation

Highlights: ► Mg–BCP were successfully prepared through in situ aqueous co-precipitation method. ► The amount of β-TCP phase was changed with the magnesium substitution level. ► The substitution of magnesium led to a decrease in the unit cell volume. ► Mg–BCP could be able to develop a new apatite phase on the surface faster than BCP. -- Abstract: In situ preparation of magnesium (Mg) substituted biphasic calcium phosphate (BCP) of hydroxyapatite (HAp)/β-tricalcium phosphate (β-TCP) were carried out through aqueous co-precipitation method. The concentrations of added magnesium were varied with the calcium in order to obtain constant (Ca + Mg)/P ratios of 1.602. X-ray diffraction (XRD) and Fourier transformed infrared (FTIR) spectroscopy were used to characterize the structure of synthesized magnesium substituted BCP powders. The results have shown that substitution of magnesium in the calcium deficient apatites revealed the formation of biphasic mixtures of different HAp/β-TCP ratios after heating at 1000 °C. The ratios of the formation of phase mixtures were dependent on the content of magnesium. After immersing in Hanks’ balanced salt solution (HBSS) for 1 week, 1 wt% magnesium substituted BCP powders were degraded and precipitation started to be formed with small granules consisting of number of flake-like crystal onto the surface of synthesized powders. On the other hand, in the case of pure BCP powders, the formation of new precipitates was detected after immersion in HBSS for 2 weeks. On the basis of these results, magnesium substituted BCP could be able to develop a new apatite phase on the surface in contact with physiological fluids faster than BCP does. In addition, the retention time to produce the new apatite phase in implantation operation for the BCP powder could be controlled by the amount of magnesium substitution.

36 MATERIALS SCIENCE↗

Temperature-dependent adsorption of surfactant molecules and associated crystallization kinetics of noncentrosymmetric Fe(IO{sub 3}){sub 3} nanorods in microemulsions

Graphical abstract: - Highlights: • Crystallization of Fe(IO{sub 3}){sub 3} in microemulsions probed by hyper-Rayleigh scattering. • A faster growth and a better shape control of nanorods are obtained at 80 °C. • Different persistent cell deformations are related to the crystallization kinetics. • A temperature-dependent adsorption of surfactants on nanorods is suggested. - Abstract: Aggregation-induced crystallization of iron iodate nanorods within organic–inorganic aggregates of primary amorphous precursors is probed by time-dependent hyper-Rayleigh scattering measurements in Triton X-100 based-microemulsions. In the context of a growing interest of noncentrosymmetric oxide nanomaterials in multi-photon bioimaging, we demonstrate by a combination of X-ray diffraction and electron microscopy that an increase in the synthesis of temperature results in faster crystallization kinetics and in a better shape-control of the final Fe(IO{sub 3}){sub 3} nanorods. For initial microemulsions of fixed composition, room-temperature synthesis leads to bundles of 1–3 μm long nanorods, whereas shorter individual nanorods are obtained when the temperature is increased. Results are interpreted in terms of kinetically unfavorable mesoscale transformations due to the strong binding interactions with Triton molecules. The interplay between the nanorod crystallization kinetics and their corresponding unit cell deformation, evidenced by lattice parameter refinements, is attributed to a temperature-dependent adsorption of surfactants molecules at the organic–inorganic interface.

36 MATERIALS SCIENCE↗

Unraveling the pathway towards superionic transport in polymer electrolytes

Ionic transport in polymers is critical for Li-ion batteries, fuel cells, flow batteries and many other energy storage and conversion technologies. A significant enhancement of ion conductivity in polymers may be achieved through an increase in the polarity of side chains and their self-organization into specific morphologies, which can potentially act as percolated ionic structures. However, higher polarity increases attractive interactions within a polymer matrix and slows down its segmental dynamics, which conversely hinders ionic transport. To overcome this tradeoff, we designed the functionalization of a Li salt-doped polymer matrix by tailored amounts of zwitterionic (ZI) groups. Our results suggest the emergence of a self-assembled percolation conductivity regime above a specific ZI concentration, in which ion hopping decouples from segmental dynamics by up to ten orders of magnitude. Consequently, in the highly concentrated ZI regime, our polymeric materials exhibit in their glassy state energy barriers for ion hopping similar to, or even smaller than, those reported for superionic ceramics. Our study also reveals that ion dynamics in the poly(zwitterion) with all monomers carrying ZI groups is significantly faster than that of a monomeric ZI compound, although the latter has much faster structural relaxation. Furthermore, this result highlights the crucial role played by the local morphology on the ion transport of polymer electrolytes and opens a new pathway for the design of superionic polymers, significantly expanding the current limited portfolio of solid-state electrolytes for energy applications.

Ion conductivity↗

Simplifying activations with linear approximations in neural networks

A key step in Neural Networks is activation. Among the different types of activation functions, sigmoid, tanh, and others involve the usage of exponents for calculation. From a hardware perspective, exponential implementation implies the usage of Taylor series or repeated methods involving many addition, multiplication, and division steps, and as a result are power-hungry and consume many clock cycles. We implement a piecewise linear approximation of the sigmoid function as a replacement for standard sigmoid activation libraries. This approach provides a practical alternative by leveraging piecewise segmentation, which simplifies hardware implementation and improves computational efficiency. In this paper, we detail piecewise functions that can be implemented using linear approximations and their implications for overall model accuracy and performance gain. Our results show that for the DenseNet, ResNet, and GoogLeNet architectures, the piecewise linear approximation of the sigmoid function provides faster execution times compared to the standard TensorFlow sigmoid implementation while maintaining comparable accuracy. Specifically, for MNIST with DenseNet, accuracy reaches 99.91% (Piecewise) vs. 99.97% (Base) with up to 1.31x speedup in execution time. For CIFAR-10 with DenseNet, accuracy improves to 98.97% (Piecewise) vs. 99.40% (Base) while achieving 1.24x faster execution. Similarly, for CIFAR-100 with DenseNet, the accuracy is 97.93% (Piecewise) vs. 98.39% (Base), with a 1.18x execution time reduction. These results confirm the proposed method’s capability to efficiently process large-scale datasets and computationally demanding tasks, offering a practical means to accelerate deep learning models, including LSTMs, without compromising accuracy.

Activation function↗

Atomic Diffusion, Segregation, and Grain Boundary Migration in Nickel-Based Alloys from Molecular Dynamics Simulations

Grain boundary diffusion and metal mobility in alloys control material performance in many applications and yet remain poorly understood at a mechanistic level. With advances in accessible time and length scales for computational molecular simulations, and recent force field developments, we now possess tools to help unravel those mechanisms. Using large-scale molecular dynamics simulations, here we examined vacancy-mediated diffusion processes in Ni-5Cr alloy with low and high-energy grain boundaries. We show that atomic diffusion inside the grain boundary plane is about four times higher than bulk diffusion, at any temperature, and exhibits a typical Arrhenius behavior with a very small energy barrier (0~.8 eV for Cr and 0.7 eV for Ni within 1300-1600 K). Additionally, the fastest diffusing species inverts; Cr diffusion was faster than Ni in the bulk but slower in the grain boundaries. This is attributed to the creation of high cohesive energy clusters of Cr at the grain boundary. Grain boundary migration was also observed to be temperature dependent and appears to be two times higher in the 5% Cr alloy than in pure Ni, highlighting the important role of the alloying element on grain boundary motion.

Simonnin, Pauline GN↗

Experimental measurement of energy release from an initiating layer in an insensitive explosive

When subjected to a shock of insufficient strength to trigger prompt reaction, heterogenous condensed phase explosives can form regions where significant amounts of the explosive remain unreacted for times much greater than the reaction time of the detonating explosive. This phenomena is observed for the explosive PBX 9502 (95 wt% TATB) both for planar and oblique input shocks. Here, we build on previous results by performing cylinder expansion (CYLEX) tests where the explosive charge is comprised of a faster core of PBX 9501 (95 wt% HMX) inside a slower annulus of PBX 9502. The detonation in the faster PBX 9501 drives an oblique shock into the adjacent PBX 9502, and an annular transverse initiating layer (IL) results. In the test geometry, the IL travels steadily down the length of the test after a short run distance. At radial positions beyond the IL, an annular region of detonating PBX 9502 is observed. Using standard CYLEX test diagnostics, we infer the total energy release of this experiment. By making the assumptions that (1) the combined energy release is comprised of contributions from detonating PBX 9501, detonating PBX 9502, and the IL in the PBX 9502 and (2) mass-specific energy release for the detonating explosives is approximately the same as typically observed for each explosive, the IL energy release and reaction efficiency can be computed. Results are compared to prior results for a similar geometry, and indicate that while shock deadened PBX 9502 does not detonate promptly, it does eventually release a significant portion of its chemical potential energy over longer timescales on the order of 10 µs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pre-vaporized ignition behavior of ethyl- and propyl-terminated oxymethylene ethers

Oxymethylene ethers (OMEs) have been studied in recent years for use as compression ignition fuel blendstocks, but the methyl-terminated OMEs commonly studied exhibit properties that are poorly optimized for engine use and distribution. Recent work has shown that OMEs with larger (ethyl, propyl, or butyl) end groups may have superior properties for fuel usage/storage. In this work, we consider ignition of four OMEs - diethoxymethane (E-1-E), dipropoxymethane (P-1-P), ethoxy-(methoxy) 2 -ethane (E-2-E), and diisopropoxymethane (iP-1-iP) - as representatives of the possible effects of changes to OME structures. To our knowledge, ignition behaviors of the latter three fuels have not been studied prior to this work. Further, we find that all of the tested linear OMEs (E-1-E, P-1-P, and E-2-E) show two-stage ignition at low temperatures and nonlinear ignition behavior, consistent with literature on methyl-terminated OMEs and E-1-E. The nonlinear, branched OME (iP-1-iP) required higher pressure and temperature to ignite than the linear OMEs; further, this fuel experienced only single stage ignition and a linear ignition delay curve. By analogy to existing kinetic mechanisms for ethers and higher alcohols, the chemical basis for the observed trends are hypothesized. Faster ignition of E-2-E results from the additional oxymethylene group providing additional sites for ROO formation and more possible QOOH structures. Slower low temperature ignition of P-1-P is driven by lower H abstraction rates in comparison to E-1-E, however at high temperatures P-1-P ignites faster, driven by increasing abstraction from the additional H site on the propyl group that opens up additional QOOH formation pathways. iP-1-iP ignition is slowed significantly by preferential H abstraction from the central carbon of the isopropyl group, which is crowded and unlikely to bond with O 2 , however at high temperatures, abstraction from H sites on the methyl groups allows for the ROO cascade initiation and subsequent rapid ignition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrodialysis: An effective methodology to purify the leachate of spent Li-ion batteries

The electrification of transportation and the transition of society towards low or net-zero carbon emissions has led to a skyrocketing global demand for Li-ion batteries. After a service life of three to ten years, Li-ion batteries have less than 80 % of their initial capacities and draw near to the end of their lives for practical utilization. Due to potential supply chain shortages and the value embodied in Li-ion batteries, it is imperative to recycle them, to recover the materials, and to improve the circularity and the sustinability of the industry. How to cost-effectively purify spent batteries while reducing time, energy, and waste emissions is a challenge faced by Li-ion battery recyclers. The first electrochemical membrane reactor reported in our group hasa high selectivity towards lower Cu 2+ , Al 3+ and Fe 3+ ions (<5 ppm) and retains >95% of the Ni 2+ , Co 2+ and Mn 2+ ions in the leachate. An advanced electrochemical membrane reactor was developed in this study. Further, not only does the new reactor have the same selectivity as the original reactor, but other advantages including a faster leachate processing rate (up to 10X faster). The advanced reactor can also directly generate acid at the anode side; eliminating the reactor restoration step. The prominent advantages that this electrodialysis technology has over chemical-precipitation methods include: (1) ion recovery efficiencies do not diminish after removing the impurities, Ni 2+ , Co 2+ and Mn 2+ , even at a higher initial Ni 2+ ion concentrations; in comparison, chemical precipitation has Ni 2+ , Co 2+ and Mn 2+ ion recovery efficiencies reduced significantly when the initial Ni 2+ , Co 2+ and Mn 2+ ion concentrations increase. (2) electrodialysis does not change the concentrations of Ni 2+ , Co 2+ and Mn 2+ ions significantly, but chemical precipitation could reduce Ni 2+ and Co 2+ ions to less than half of their initial values. Through electro-dialyzing the leachate, the H 2 evolution reaction mechanism was found to switch from the Volmer-acid Heyrovsky mechanism to the Volmer-alkaline Heyrovsky mechanism at a pH of around 3.7.

25 ENERGY STORAGE↗

Potential-induced degradation of Cu(In,Ga)Se 2 can occur by shunting the front i-ZnO and by damaging the p-n junction

In this work we test field-relevant potential-induced degradation (PID) behavior by encapsulating laboratory Cu(In,Ga)Se 2 (CIGS) solar cells and applying +1000 V uniformly on the face of the front glass. In this configuration, we find that K-rich borosilicate glass reduces the extent of PID relative to Na-rich soda-lime glass. We also find that the standard testing protocol of stressing cells at short-circuit leads to faster PID than stressing cells at open-circuit. We characterize two types of CIGS PID: The first, front shunting PID, is driven by front-glass stress and occurs when alkali metal cations accumulate in the i-ZnO buffer, where they increase shunt conductance to reduce fill factor. The second, p-n junction PID, results from back-glass stress as alkali metal cations pile up near the CIGS surface/CdS buffer, where they reduce charge carrier concentration, open-circuit voltage, and fill factor to degrade efficiency ~160 times faster than front shunting PID.

14 SOLAR ENERGY↗