Search NASA⌕ Search

SEARCH · Search NASA

Results for “fixed points”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Adaptive Space-Time Methods for Large Scale Optimal Design

When modeling complex physical systems with advanced dynamics, such as shocks and singularities, many classic methods for solving partial differential equations can return inaccurate or unusable results. One way to resolve these complex dynamics is through r-adaptive refinement methods, in which a fixed number of mesh points are shifted to areas of high interest. The mesh refinement map can be found through the solution of the Monge-Ampére equation, a highly nonlinear partial differential equation. Due to its nonlinearity, the numerical solution of the Monge-Ampére equation is nontrivial and has previously required computationally expensive methods. In this report, we detail our novel optimization-based, multigrid-enabled solver for a low-order finite element approximation of the Monge-Ampére equation. This fast and scalable solver makes r-adaptive meshing more readily available for problems related to large-scale optimal design. Beyond mesh adaptivity, our report discusses additional applications where our fast solver for the Monge-Ampére equation could be easily applied.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

UAE6 - Wind Tunnel Tests Data - UAE6 - Sequence E - Raw Data

Sequence E: Yaw Releases (P) This test sequence used a downwind, rigid turbine with a 3.4° cone angle. The wind speeds ranged from 7 m/s to 17 m/s. Initial yaw angles of ±90° were achieved. The blade tip pitch was 3°. The rotor rotated at 72 RPM. Blade and probe pressure measurements were collected. The teeter dampers were replaced with rigid links, and these two channels were flagged as not applicable by setting the measured values in the data file to –99999.99 Nm. The teeter link load cell was pre-tensioned to 40,000 N. The turbine was positioned at each specified yaw angle. A 30- second data set was collected with the yaw brake engaged. These points used a letter for the last digit beginning with A and proceeding through the alphabet as repeat points were needed. These points were plotted and compared to ascertain the functionality of the instrumentation. The files ending in numbers beginning with 0 and increasing with each repetition represent yaw release points. Once the fixed-position yaw test was complete, the yaw drive was engaged to hold the turbine. The yaw brake was released, and the yaw drive was disabled allowing the turbine to yaw freely. The yaw drive was disabled about 5 seconds into the campaign, and the turbine was allowed to yaw freely for the rest of the 30-second duration. When the yaw drive is disabled, no torque is applied to the motor, and the inertia and yawing force of the nacelle and rotor overcomes the friction and inertia of the yaw gear and motor. The yaw releases were repeated five times at each condition. Four additional campaigns were collected to determine the turbine’s natural yaw error by releasing the brake at 0° yaw error. These file names use the E designation, followed by two digits for wind speed, followed by XXXX, followed by the repetition digit.

17 WIND ENERGY↗
NASA NTRS1971

The Stanford gyroscope experiment

Gyroscopes in motion about a massive body are found to have two main effects: (1) geodetic effect, solely due to motion of the gyroscope about the earth and (2) motional effect, due to earth rotation. An experiment is proposed to measure the precession rate of one or more gyroscopes, mounted either on earth or in a satellite, with respect to the axis of a telescope pointing at a suitable fixed star. The procedures and apparatus to be used in this experiment are outlined; the error analysis is summarized. The relation of error to size, speed, and mechanical properties of rotor is presented, along with the design requirements for accuracy of 10 to the -16th power rad/s.

Everitt, C. W. F.↗
NASA NTRS1973

A general purpose maneuver turns computer program

Program computes turns required to point given spacecraft-fixed vector in direction of given inertially-fixed vector. Program was written in FORTRAN V language for Univac-1108 computer.

Jaivin, G. I.↗
NASA NTRS1973

On local inflexional instability in boundary-layer flows.

Development of a linearized theory of the two- and three-dimensional incompressible viscous flows ensuing from locally unstable velocity profiles. Indications of the theory with respect to the instability of the two-dimensional separation bubble and the mechanisms underlying formation of the turbulence wedge behind a fixed roughness element are pointed out. In connection with the aforementioned mechanisms, a theoretically based argument is advanced that, as a result of local inflectional instability of the velocity profile in a succession of skewed planes, a corresponding succession of stationary vortices is induced, the induction process terminating at the boundaries of the turbulence wedge when the velocity profiles along the boundaries themselves become unstable. It is suggested that a rational method of predicting the occurrence of roughness-induced turbulence wedges might be possible if a theory were available for the steady laminar flow caused by the roughness at a stage just prior to transition.

Tobak, M.↗
NASA NTRS1980

Orbit-averaged behavior of magnetic control laws for momentum unloading

Analytical formulas are derived for orbit-averaged behavior of magnetic control laws for unloading the excess angular momentum of a spacecraft reaction wheel control system in the presence of secular environmental torques. The specific example of an axially symmetric spacecraft with an inertially fixed attitude for which the dominant environmental torque is the gravity-gradient torque is treated in detail, but extensions of the general approach to other inertially fixed and earth-pointing spacecraft are discussed. The analytical formulas are compared to detailed simulations performed for the Solar Maximum Mission spacecraft, and agreement to within 10% is found. The analytical formulas can be used in place of detailed simulations for preliminary studies, and can be used to find selected cases giving the most stringent tests of momentum unloading capability for which detailed simulations may be performed.

Camillo, P. J.↗
NASA NTRS1980

Infrared Astronomical Satellite /IRAS/ Scientific Data Analysis System

The Infrared Astronomical Satellite (IRAS), to be launched in 1982, is discussed. It will systematically survey the entire sky over a large percentage of the infrared spectrum, in the wavelength region of 8 to 120 microns, at sensitivities a hundred times greater than previously achieved from high-altitude observatories, aircraft, balloons or sounding rockets. The Scientific Data Analysis System (SDAS), an off-line data processing facility, is examined. Its primary function is to produce a catalog of inertially fixed infrared-emitting point sources (mainly stars and galaxies) observed during the IRAS survey. Details for source detection and confirmation are given. It is estimated that the catalog will contain approximately a million objects having a brightness of 10 amtowatts per square centimeter or greater; 125,000 SDAS detections, if spurious events of signal-to-noise ratios greater than 2.5 are included, will be made every day.

Duxbury, J. H.↗
NASA NTRS1982

Simulator study of a pictorial display for general aviation instrument flight

A simulation study of a computer drawn pictorial display involved a flight task that included an en route segment, terminal area maneuvering, a final approach, a missed approach, and a hold. The pictorial display consists of the drawing of boxes which either move along the desired path or are fixed at designated way points. Two boxes may be shown at all times, one related to the active way point and the other related to the standby way point. Ground tracks and vertical profiles of the flights, time histories of the final approach, and comments were obtained from time pilots. The results demonstrate the accuracy and consistency with which the segments of the flight are executed. The pilots found that the display is easy to learn and to use; that it provides good situation awareness, and that it could improve the safety of flight. The small size of the display, the lack of numerical information on pitch, roll, and heading angles, and the lack of definition of the boundaries of the conventional glide slope and localizer areas were criticized.

Adams, J. J.↗
NASA NTRS1984

Effects of aircraft and flight parameters on energy-efficient profile descents in time-based metered traffic

Concepts to save fuel while preserving airport capacity by combining time based metering with profile descent procedures were developed. A computer algorithm is developed to provide the flight crew with the information needed to fly from an entry fix to a metering fix and arrive there at a predetermined time, altitude, and airspeed. The flight from the metering fix to an aim point near the airport was calculated. The flight path is divided into several descent and deceleration segments. Descents are performed at constant Mach numbers or calibrated airspeed, whereas decelerations occur at constant altitude. The time and distance associated with each segment are calculated from point mass equations of motion for a clean configuration with idle thrust. Wind and nonstandard atmospheric properties have a large effect on the flight path. It is found that uncertainty in the descent Mach number has a large effect on the predicted flight time. Of the possible combinations of Mach number and calibrated airspeed for a descent, only small changes were observed in the fuel consumed.

Dejarnette, F. R.↗
NASA NTRS1986

Adaptive computational methods for SSME internal flow analysis

Adaptive finite element methods for the analysis of classes of problems in compressible and incompressible flow of interest in SSME (space shuttle main engine) analysis and design are described. The general objective of the adaptive methods is to improve and to quantify the quality of numerical solutions to the governing partial differential equations of fluid dynamics in two-dimensional cases. There are several different families of adaptive schemes that can be used to improve the quality of solutions in complex flow simulations. Among these are: (1) r-methods (node-redistribution or moving mesh methods) in which a fixed number of nodal points is allowed to migrate to points in the mesh where high error is detected; (2) h-methods, in which the mesh size h is automatically refined to reduce local error; and (3) p-methods, in which the local degree p of the finite element approximation is increased to reduce local error. Two of the three basic techniques have been studied in this project: an r-method for steady Euler equations in two dimensions and a p-method for transient, laminar, viscous incompressible flow. Numerical results are presented. A brief introduction to residual methods of a-posterior error estimation is also given and some pertinent conclusions of the study are listed.

Oden, J. T.↗
NASA NTRS1987

The right wing of the LEFT airplane

The NASA Leading-Edge Flight Test (LEFT) program addressed the environmental issues which were potential problems in the application of Laminar Flow Control (LFC) to transport aircraft. These included contamination of the LFC surface due to dirt, rain, insect remains, snow, and ice, in the critical leading-edge region. Douglas Aircraft Company designed and built a test article which was mounted on the right wing of the C-140 JetStar aircraft. The test article featured a retractable leading-edge high-lift shield for contamination protection and suction through perforations on the upper surface for LFC. Following a period of developmental flight testing, the aircraft entered simulated airline service, which included exposure to airborne insects, heavy rain, snow, and icing conditions both in the air and on the ground. During the roughly 3 years of flight testing, the test article has consistently demonstrated laminar flow in cruising flight. The experience with the LEFT experiment was summarized with emphasis on significant test findings. The following items were discussed: test article design and features; suction distribution; instrumentation and transition point reckoning; problems and fixes; system performance and maintenance requirements.

Powell, Arthur G.↗
NASA NTRS1990

Attitude determination and parameter estimation using vector observations - Application

This paper presents tests of a new method for the simultaneous estimation of spacecraft attitude and sensor biases, based on a quaternion estimation algorithm minimizing Wahba's loss function. The new method is compared with a conventional batch least-squares differential correction algorithm. The estimates are based on data from strapdown gyros and star trackers, simulated with varying levels of Gaussian noise for both inertially-fixed and earth-pointing attitudes. Both algorithms solve for the spacecraft attitude and the gyro drift rate biases. In the majority of tests performed, the two methods converge to the same estimates in the same number of iterations, but the new algorithm requires about 60 percent more computational effort. Some cases were found in which the new method converges in fewer iterations than the differential correction, and some for which the differential correction requires fewer iterations.

Markley, F. Landis↗
NASA NTRS1993

Ultrasonic Probing Of Complexly Shaped Joints

Technique developed involves use of ultrasonics to inspect first bond surfaces of solid-rocket-motor joints. By fitting pieces of insulating materials to mate exactly with complicated shapes of affected parts of insulation, complicated shapes redefined into simpler ones probed more easily. When technique used to insonify from insulation side, one readily detects difference between disbond and good bond. Same technique applied to field tang joints, field clevis joints, and aft-dome-to-fixed-nozzle-housing attachment points. Although developed for inspecting joints in solid rocket motors, also applicable to nondestructive evaluation of other complicated joints.

Madaras, Eric I.↗
NASA NTRS1956

Lift hysteresis at stall as an unsteady boundary-layer phenomenon

Analysis of rotating stall of compressor blade rows requires specification of a dynamic lift curve for the airfoil section at or near stall, presumably including the effect of lift hysteresis. Consideration of the magnus lift of a rotating cylinder suggests performing an unsteady boundary-layer calculation to find the movement of the separation points of an airfoil fixed in a stream of variable incidence. The consideration of the shedding of vorticity into the wake should yield an estimate of lift increment proportional to time rate of change of angle of attack. This increment is the amplitude of the hysteresis loop. An approximate analysis is carried out according to the foregoing ideas for a 6:1 elliptic airfoil at the angle of attack for maximum lift. The assumptions of small perturbations from maximum lift are made, permitting neglect of distributed vorticity in the wake. The calculated hysteresis loop is counterclockwise. Finally, a discussion of the forms of hysteresis loops is presented; and, for small reduced frequency of oscillation, it is concluded that the concept of a viscous "time lag" is appropriate only for harmonic variations of angle of attack with time at mean conditions other than maximum lift.

Moore, Franklin K↗
NASA NTRS1995

Flexible Borescope For Inspecting Ducts

Borescope and associated equipment developed specifically for use in optical inspection of inside of flexible joints in rocket-engine fuel duct. Apparatus includes assembly, characterized as "mouse/canoe," at sensing end of 10-ft borescope cable. Borescope tip rides in mouse/canoe. The mouse/canoe made laterally compressible, to facilitate movement past constrictions and provides fixed distance from inspection point permitting accurate description in duct inspected.

Shinozaki, Keith↗
NASA NTRS1996

Microgravity effects during fertilization, cell division, development, and calcium metabolism in sea urchins

The overall objectives of this project are to explore the role of microgravity during fertilization, early development, cytoskeletal organization, and skeletal calcium deposition in a model development system: the sea urchin eggs and embryos. While pursuing these objectives, we have also helped to develop, test, and fly the Aquatic Research Facility (ARF) system. Cells were fixed at preselected time points to preserve the structures and organelles of interest with regards to cell biology events during development. The protocols used for the analysis of the results had been developed during the earlier part of this research and were applied for post-flight analysis using light and (immuno)fluorescence microscopy, scanning electron microscopy, and transmission electron microscopy. The structures of interest are: microtubules during fertilization, cell division, and cilia movement; microfilaments during cell surface restructuring and cell division; centrosomes and centrioles during cell division, cell differentiation, and cilia formation and movement; membranes, Golgi, endoplasmic reticulum, mitochondria, and chromosomes at all stages of development; and calcium deposits during spicule formation in late-stage embryos. In addition to further explore aspects important or living in space, several aspects of this research are also aimed at understanding diseases that affect humans on Earth which may be accelerated in space.

Schatten, Heide↗
NASA NTRS1996

Performance Evaluation of the Gravity Probe B Design

This report documents the simulation of the Lockheed Martin designed Gravity Probe B (GPB) spacecraft developed tool by bd Systems Inc using the TREETOPS simulation. This study quantifies the effects of flexibility and liquid helium slosh on GPB spacecraft control performance. The TREETOPS simulation tool permits the simulation of flexible structures given that a flexible body model of the structure is available. For purposes of this study, a flexible model of the GPB spacecraft was obtained from Lockheed Martin. To model the liquid helium slosh effects, computational fluid dynamics (CFD) results' were obtained, and used to develop a dynamic model of the slosh effects. The flexible body and slosh effects were incorporated separately into the TREETOPS simulation, which places the vehicle in a 650 km circular polar orbit and subjects the spacecraft to realistic environmental disturbances and sensor error quantities. In all of the analysis conducted in this study the spacecraft is pointed at an inertially fixed guide star (GS) and is rotating at a constant rate about this line of sight.

Francis, Ronnie↗