Search NASA⌕ Search

SEARCH · Search NASA

Results for “formulation systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Goals Analysis Procedure Guidelines for Applying the Goals Analysis Process

One of the key elements to successful project management is the establishment of the "right set of requirements", requirements that reflect the true customer needs and are consistent with the strategic goals and objectives of the participating organizations. A viable set of requirements implies that each individual requirement is a necessary element in satisfying the stated goals and that the entire set of requirements, taken as a whole, is sufficient to satisfy the stated goals. Unfortunately, it is the author's experience that during project formulation phases' many of the Systems Engineering customers do not conduct a rigorous analysis of the goals and objectives that drive the system requirements. As a result, the Systems Engineer is often provided with requirements that are vague, incomplete, and internally inconsistent. To complicate matters, most systems development methodologies assume that the customer provides unambiguous, comprehensive and concise requirements. This paper describes the specific steps of a Goals Analysis process applied by Systems Engineers at the NASA Langley Research Center during the formulation of requirements for research projects. The objective of Goals Analysis is to identify and explore all of the influencing factors that ultimately drive the system's requirements.

Motley, Albert E., III↗

A three-dimensional meso-macroscopic model for Li-Ion intercalation batteries

Through this study, we present a three-dimensional computational formulation for electrode-electrolyte-electrode system of Li-Ion batteries. The physical consistency between electrical, thermal and chemical equations is enforced at each time increment by driving the residual of the resulting coupled system of nonlinear equations to zero. The formulation utilizes a rigorous volume averaging approach typical of multiphase formulations used in other fields and recently extended to modeling of supercapacitors [1]. Unlike existing battery modeling methods which use segregated solution of conservation equations and idealized geometries, our unified approach can model arbitrary battery and electrode configurations. The consistency of multi-physics solution also allows for consideration of a wide array of initial conditions and load cases. The formulation accounts for spatio-temporal variations of material and state properties such as electrode/void volume fractions and anisotropic conductivities. The governing differential equations are discretized using the finite element method and solved using a nonlinearly consistent approach that provides robust stability and convergence. The new formulation was validated for standard Li-ion cells and compared against experiments. Finally, its scope and ability to capture spatio-temporal variations of potential and lithium distribution is demonstrated on a prototypical three-dimensional electrode problem.

25 ENERGY STORAGE↗

A Darcy‐Brinkman‐Biot Approach to Modeling the Hydrology and Mechanics of Porous Media Containing Macropores and Deformable Microporous Regions

Abstract The coupled hydrology and mechanics of soft porous materials (such as clays, hydrogels, membranes, and biofilms) is an important research area in several fields, including water and energy technologies as well as biomedical engineering. Well‐established models based on poromechanics theory exist for describing these coupled properties, but these models are not adapted to describe systems with more than one characteristic length scale, that is, systems that contain both macropores and micropores. In this paper, we expand upon the well‐known Darcy‐Brinkman formulation of fluid flow in two‐scale porous media to develop a “Darcy‐Brinkman‐Biot” formulation: a general coupled system of equations that approximates the Navier‐Stokes equations in fluid‐filled macropores and resembles the equations for poroelasticity in microporous regions. We parameterized and validated our model for systems that contain either plastic (swelling clay) or elastic microporous regions. In particular, we used our model to predict the permeability of an idealized siliciclastic sedimentary rock as a function of pore water salinity and clay content. Predicted permeability values are well described by a single parametric relation between permeability and clay volume fraction that agrees with existing experimental data sets. Our novel formulation captures the coupled hydro‐chemo‐mechanical properties of sedimentary rocks and other deformable porous media in a manner that can be readily implemented within the framework of Digital Rock Physics.

Carrillo, Francisco J.↗

Quantum-classical correspondence in steady states of nonadiabatic systems

We first present nonadiabatic path integral which is exact formulation of quantum dynamics in nonadiabatic systems. Then, by applying the stationary phase approximations to the nonadiabatic path integral, a semiclassical quantization condition, i.e., quantum-classical correspondence, for steady states of nonadiabatic systems is presented as a nonadiabatic trace formula. The present quantum-classical correspondence indicates that a set of primitive hopping periodic orbits, which are invariant under time evolution in the phase space of the slow degree of freedom, should be quantized. The semiclassical quantization is then applied to a simple nonadiabatic model and accurately reproduces exact quantum energy levels.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Application of information theory to the design of line-scan imaging systems

Information theory is used to formulate a single figure of merit for assessing the performance of line scan imaging systems as a function of their spatial response (point spread function or modulation transfer function), sensitivity, sampling and quantization intervals, and the statistical properties of a random radiance field. Computational results for the information density and efficiency (i.e., the ratio of information density to data density) are intuitively satisfying and compare well with experimental and theoretical results obtained by earlier investigators concerned with the performance of TV systems.

Huck, F. O.↗

Development of a rotorcraft. Propulsion dynamics interface analysis, volume 1

The details of the modeling process and its implementation approach are presented. A generic methodology and model structure for performing coupled propulsion/rotor response analysis that is applicable to a variety of rotorcraft types was developed. A method for parameterizing the model structure to represent a particular rotorcraft is defined. The generic modeling methodology, the development of the propulsion system and the rotor/fuselage models, and the formulation of the resulting coupled rotor/propulsion system model are described. A test case that was developed is described.

Hull, R.↗

Discrete and continuous dynamics modeling of a mass moving on a flexible structure

A general discrete methodology for modeling the dynamics of a mass that moves on the surface of a flexible structure is developed. This problem was motivated by the Space Station/Mobile Transporter system. A model reduction approach is developed to make the methodology applicable to large structural systems. To validate the discrete methodology, continuous formulations are also developed. Three different systems are examined: (1) simply-supported beam, (2) free-free beam, and (3) free-free beam with two points of contact between the mass and the flexible beam. In addition to validating the methodology, parametric studies were performed to examine how the system's physical properties affect its dynamics.

Herman, Deborah Ann↗

Product Engineering Class in the Software Safety Risk Taxonomy for Building Safety-Critical Systems

When software safety requirements are imposed on legacy safety-critical systems, retrospective safety cases need to be formulated as part of recertifying the systems for further use and risks must be documented and managed to give confidence for reusing the systems. The SEJ Software Development Risk Taxonomy [4] focuses on general software development issues. It does not, however, cover all the safety risks. The Software Safety Risk Taxonomy [8] was developed which provides a construct for eliciting and categorizing software safety risks in a straightforward manner. In this paper, we present extended work on the taxonomy for safety that incorporates the additional issues inherent in the development and maintenance of safety-critical systems with software. An instrument called a Software Safety Risk Taxonomy Based Questionnaire (TBQ) is generated containing questions addressing each safety attribute in the Software Safety Risk Taxonomy. Software safety risks are surfaced using the new TBQ and then analyzed. In this paper we give the definitions for the specialized Product Engineering Class within the Software Safety Risk Taxonomy. At the end of the paper, we present the tool known as the 'Legacy Systems Risk Database Tool' that is used to collect and analyze the data required to show traceability to a particular safety standard

Hill, Janice↗

Comparing Consider-Covariance Analysis with Sigma-Point Consider Filter and Linear-Theory Consider Filter Formulations

Recent literature in applied estimation theory reflects growing interest in the sigma-point (also called unscented ) formulation for optimal sequential state estimation, often describing performance comparisons with extended Kalman filters as applied to specific dynamical problems [c.f. 1, 2, 3]. Favorable attributes of sigma-point filters are described as including a lower expected error for nonlinear even non-differentiable dynamical systems, and a straightforward formulation not requiring derivation or implementation of any partial derivative Jacobian matrices. These attributes are particularly attractive, e.g. in terms of enabling simplified code architecture and streamlined testing, in the formulation of estimators for nonlinear spaceflight mechanics systems, such as filter software onboard deep-space robotic spacecraft. As presented in [4], the Sigma-Point Consider Filter (SPCF) algorithm extends the sigma-point filter algorithm to the problem of consider covariance analysis. Considering parameters in a dynamical system, while estimating its state, provides an upper bound on the estimated state covariance, which is viewed as a conservative approach to designing estimators for problems of general guidance, navigation and control. This is because, whether a parameter in the system model is observable or not, error in the knowledge of the value of a non-estimated parameter will increase the actual uncertainty of the estimated state of the system beyond the level formally indicated by the covariance of an estimator that neglects errors or uncertainty in that parameter. The equations for SPCF covariance evolution are obtained in a fashion similar to the derivation approach taken with standard (i.e. linearized or extended) consider parameterized Kalman filters (c.f. [5]). While in [4] the SPCF and linear-theory consider filter (LTCF) were applied to an illustrative linear dynamics/linear measurement problem, in the present work examines the SPCF as applied to nonlinear sequential consider covariance analysis, i.e. in the presence of nonlinear dynamics and nonlinear measurements. A simple SPCF for orbit determination, exemplifying an algorithm hosted in the guidance, navigation and control (GN&C) computer processor of a hypothetical robotic spacecraft, was implemented, and compared with an identically-parameterized (standard) extended, consider-parameterized Kalman filter. The onboard filtering scenario examined is a hypothetical spacecraft orbit about a small natural body with imperfectly-known mass. The formulations, relative complexities, and performances of the filters are compared and discussed.

Lisano, Michael E.↗

Economies of Numbers Formulations for Optimal Process Family Design of Carbon Capture Systems

Enabling rapid, widespread deployment of many process variants across a range of design requirements is key to ensuring the widespread availability of critical decentralized technologies such as carbon capture systems. Unfortunately, traditional process design methods are not efficient for designing many similar variations of a process rapidly across a wide range of system requirements. Rather than considering each process variant as a separate design task, we have proposed viewing the entire set of variants as a “family.” In our work, we present rigorous optimization formulations that simultaneously design each variant within the family from a platform of available unit modules, largely inspired by product family and platform design.

Stinchfield, Georgia↗

Analytical formulation of orbiter-payload coupled by trunnion joints with Coulomb friction

An orbiter and its payload substructure are linked together by five trunnion joints which have thirty degrees-of-freedom. Geometric compatibility conditions require fourteen of the interface physical coordinates of the orbiter and payload to be equal to each other and the remaining sixteen are free to have relative motions under Coulomb friction. The component modes synthesis method using fourteen inertia relief attachment modes for the formulation of the coupled system is presented. The exact nonlinear friction function is derived based on the characteristics of the joints. Formulation is applicable to an orbiter that carries any number of payload substructures.

Liu, Frank C.↗

Analytical formulation of orbiter-payload models coupled by trunnion joints with Coulomb friction

An orbiter and its payload substructure are linked together by five trunnion joints which have thirty degrees-of-freedom. Geometric compatibility conditions require fourteen of the interface physical coordinates of the orbiter and payload to be equal to each other and the remaining sixteen are free to have relative motions under Coulomb friction. The component modes synthesis method using fourteen inertia relief attachment modes for the formulation of the coupled system is presented. The exact nonlinear friction function is derived based on the characteristics of the joints. Formulation is applicable to an orbiter that carries any number of payload substructures.

Liu, Frank C.↗

Models and techniques for evaluating the effectiveness of aircraft computing systems

System models that provide a basis for the formulation and evaluation of the performability of commercial aircraft computer system are developed. Quantitative measures of the system effectiveness are formulated. Analytic and simulation techniques for evaluation of the effectiveness and performability of a proposed or existing aircraft computer were studied.

Meyer, J. F.↗

Higher Order, Hybrid BEM/FEM Methods Applied to Antenna Modeling

In this presentation, the authors address topics relevant to higher order modeling using hybrid BEM/FEM formulations. The first of these is the limitation on convergence rates imposed by geometric modeling errors in the analysis of scattering by a dielectric sphere. The second topic is the application of an Incomplete LU Threshold (ILUT) preconditioner to solve the linear system resulting from the BEM/FEM formulation. The final tOpic is the application of the higher order BEM/FEM formulation to antenna modeling problems. The authors have previously presented work on the benefits of higher order modeling. To achieve these benefits, special attention is required in the integration of singular and near-singular terms arising in the surface integral equation. Several methods for handling these terms have been presented. It is also well known that achieving ~he high rates of convergence afforded by higher order bases may als'o require the employment of higher order geometry models. A number of publications have described the use of quadratic elements to model curved surfaces. The authors have shown in an EFIE formulation, applied to scattering by a PEC .sphere, that quadratic order elements may be insufficient to prevent the domination of modeling errors. In fact, on a PEC sphere with radius r = 0.58 Lambda(sub 0), a quartic order geometry representation was required to obtain a convergence benefi.t from quadratic bases when compared to the convergence rate achieved with linear bases. Initial trials indicate that, for a dielectric sphere of the same radius, - requirements on the geometry model are not as severe as for the PEC sphere. The authors will present convergence results for higher order bases as a function of the geometry model order in the hybrid BEM/FEM formulation applied to dielectric spheres. It is well known that the system matrix resulting from the hybrid BEM/FEM formulation is ill -conditioned. For many real applications, a good preconditioner is required to obtain usable convergence from an iterative solver. The authors have examined the use of an Incomplete LU Threshold (ILUT) preconditioner . to solver linear systems stemming from higher order BEM/FEM formulations in 2D scattering problems. Although the resulting preconditioner provided aD excellent approximation to the system inverse, its size in terms of non-zero entries represented only a modest improvement when compared with the fill-in associated with a sparse direct solver. Furthermore, the fill-in of the preconditioner could not be substantially reduced without the occurrence of instabilities. In addition to the results for these 2D problems, the authors will present iterative solution data from the application of the ILUT preconditioner to 3D problems.

Fink, P. W.↗

Design of Distributed Cyber-Physical Systems for Connected and Automated Vehicles with Implementing Methodologies

With the development of communication and control technology, intelligent transportation systems have received increasing attention from both industry and academia. Intelligent transportation systems are supported by the Internet of Things, Cyber-Physical System, Artificial Intelligence, Cloud Computing and many other technologies, which supply fundamental information for connected and automated vehicles. Although plenty of studies have provided different formulations for intelligent transportation systems, many of them depend on Master Control Center. However, a centralized control mode requires a huge amount of data transmission and high level of hardware configuration and may cause communication delay and privacy leak. Some distributed architectures have been proposed to overcome the above problems but systematized technologies to collect and exchange information, process large amounts of data, model the dynamics of vehicles, and safely control the connected and automated vehicles are not explored in detail. In this paper, we proposed a novel distributed cyber-physical system for connected and automated vehicles in which every vehicle is modeled as a double-integrator using edge computing to analyze information collected from its nearest neighbors. The vehicles are supposed to travel along a desired trajectory and to maintain a rigid formation geometry. Related methodologies for the proposed system are illustrated and experiments are conducted showing that the performance of the connected and automated vehicles matches very well with analytic predictions. Some design guidelines and open questions are provided for the future study.

97 MATHEMATICS AND COMPUTING↗

Chapter 4 - Recent Advances in Identification of Differential Equations from Noisy Data: IDENT Review

Differential equations and numerical methods are extensively used to model various real-world phenomena in science and engineering. With modern developments, we aim to find the underlying differential equation from a single observation of time-dependent data. If we assume that the differential equation is a linear combination of various linear and nonlinear differential terms, then the identification problem can be formulated as solving a linear system. The goal then reduces to finding the optimal coefficient vector that best represents the time derivative of the given data. We review some recent works on the identification of differential equations. We find some common themes for the improved accuracy: (i) The formulation of linear system with proper denoising is important, (ii) how to utilize sparsity and model selection to find the correct coefficient support needs careful attention, and (iii) there are ways to improve the coefficient recovery. We present an overview and analysis of recent developments on the topic.

97 MATHEMATICS AND COMPUTING↗

Robust Control Design for Systems With Probabilistic Uncertainty

This paper presents a reliability- and robustness-based formulation for robust control synthesis for systems with probabilistic uncertainty. In a reliability-based formulation, the probability of violating design requirements prescribed by inequality constraints is minimized. In a robustness-based formulation, a metric which measures the tendency of a random variable/process to cluster close to a target scalar/function is minimized. A multi-objective optimization procedure, which combines stability and performance requirements in time and frequency domains, is used to search for robustly optimal compensators. Some of the fundamental differences between the proposed strategy and conventional robust control methods are: (i) unnecessary conservatism is eliminated since there is not need for convex supports, (ii) the most likely plants are favored during synthesis allowing for probabilistic robust optimality, (iii) the tradeoff between robust stability and robust performance can be explored numerically, (iv) the uncertainty set is closely related to parameters with clear physical meaning, and (v) compensators with improved robust characteristics for a given control structure can be synthesized.

Crespo, Luis G.↗