Search NASA⌕ Search

SEARCH · Search NASA

Results for “map interpretation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Geology and landscape evolution of the Hellas region of Mars

Hellas basin on Mars has been the site of volcanism, tectonism, and modification by fluvial, mass-wasting, and eolian processes over its more than 4-b.y. existence. Our detailed geologic mapping and related studies have resulted in the following new interpretations. The asymmetric distribution of highland massifs and other structures that define the uplifted basin rim suggest a formation of the basin by the impact of a low-angle bolide having a trajectory heading S60E. During the Late Noachian, the basin was infilled, perhaps by lava flows, that were sufficiently thick (greater than 1 km) to produce wrinkle ridges on the fill material and extensional faulting along the west rim of the basin. At about the same time, deposits buried northern Malea Planum, which are interpreted to be pyroclastic flows from Amphitrites and Peneus Paterae on the basis of their degraded morphology, topology, and the application of a previous model for pyroclastic volcanism on Mars. Peneus forms a distinctive caldera structure that indicates eruption of massive volumes of magma, whereas Amphitrites is a less distinct circular feature surrounded by a broad, low, dissected shield that suggests generally smaller volume eruptions. During the Early Hesperian, an approximately 1-to 2km-thick sequence of primarily fined-grained, eolian material was deposited on the floor of Hellas basin. Subsequently, the deposit was deeply eroded, except where armored by crater ejecta, and it retreated as much as 200-300 km along its western margin, leaving behind pedestal craters and knobby outliers of the deposit. Local debris flows within the deposit attest to concentrations of groundwater, perhaps in part brought in by outflow floods along the east rim of the basin. These floods may have deposited approximately 100-200m of sediment, subduing wrinkle ridges in the eastern part of the basin floor. During the Late Hesperian and Amazonian, eolian mantles were emplaced on the basin rim and floor and surrounding highlands. Their subsequent erosion resulted in pitted and etched plains and crater fill, irregular mesas, and pedestal craters. Local evidence occurs for the possible former presence of ground ice or ice sheets approximately 100 km across; however, we disagree with a hypothesis that suggest that the entire south rim and much of the floor of Hellas have been glaciated. Orientations of dune fields and yardangs in lower parts of Hellas basin follow directions of the strongest winds predicted by a recently published general circulation model (GCM). Transient frost and dust splotches in the region are, by contrast, related to the GCM prediction for the season in which the images they appear in were taken.

Tanaka, Kenneth L.↗
NASA NTRS1995

GHRS observations of cool, low-gravity star. 2: Flow and turbulent velocities in the outer atmosphere of gamma CRU CIS (M3.4 III)

The Goddard High Resoulution Spectrograph (GHRS) on the Hubble Space Telescope (HST) has been used to obtain medium (R = 20,000) and high (R = 85,000) resoultion UV spectra of chromosphere emission features for the M3.4 III star gamma Cru. Small Science Aperture (SSA) G270M and Echelle-B spectra of selected regions in the 2300-2850 A range were obtained to determine the kinematics of the chromosphere using lines of C2), Fe2, Co2, Si1/2), Ni2, Mn2, and Mg2. Profiles of C2) (UV 0.01) lines and fluorescently excited lines of low optical depth indicate average turbulent velocities (Doppler FWHM) of 30.2 +/- 1.3 and 28.8 +/- 1.3 km/s, respectively. The fluorescent emission lines (mean RV = 21.3 +/- 0.9 km/s) and the wings of the emission components of Fe2 lines (mean RV = 22.8 +/- 0.4 km/s) are approximately at rest relative to the radial velocity of the star (21 km/s), while the C2) lines show a modest inflow (mean RV = 23.1 +/- 0.9 km/s). The more opaque lines of Fe2 and Mg2 exhibit complex profiles resulting from line formation in an optically thick, extended expanding atmosphere. The emission wings of these lines are broadened by multiple scattering, and they are centered near the photospheric radial velocity. Closer to line center, these strong lines show a strong blueshifted self-absorption feature (already seen in IUE data), indicative of formation in an expanding chromosphere, and a previously unseen dip in the profiles on the red side of line center. The absorption components, when extracted using simple Gaussian fits, show strong correlations with the relative optical depths of the lines. The derived absorption flow velocities converge to the photospheric velocity as one examines spectra features formed deeper in the atmosphere. The blueward abosrption velocity increases in magnitude from about 7 to 14 km/s with increasing line optical depth - the strong absorptions directly map the acceleration of the outflowing stellar wind, while the interpretation of the weaker redshifted abosrptions is more ambiguous, indicating either an inflow of material or formation in an extended, spherically expanding outflow. The Mg2 and Fe2 profiles, taken together, imply that the wind speed decreases between the atmospheric layers where the Mg2 and Fe2 self-absorption components are formed. Interstellar absorptions are seen in the resonance lines of Mg2 (UV 1) and Fe2 (UV1) with zero-volt lower levels, at about -3 km/s, consistent with models of the interstellar medium in the direction of gamma Cru. Finally, we have detected the Mg2 'satellite lines' seen in solar spectra obtained above the limb. In gamma Cru these lines are probably fluorescently excited by H Ly beta.

Carpenter, Kenneth G.↗
NASA NTRS1996

The Aggregate Representation of Terrestrial Land Covers Within Global Climate Models (GCM)

This project had four initial objectives: (1) to create a realistic coupled surface-atmosphere model to investigate the aggregate description of heterogeneous surfaces; (2) to develop a simple heuristic model of surface-atmosphere interactions; (3) using the above models, to test aggregation rules for a variety of realistic cover and meteorological conditions; and (4) to reconcile biosphere-atmosphere transfer scheme (BATS) land covers with those that can be recognized from space; Our progress in meeting these objectives can be summarized as follows. Objective 1: The first objective was achieved in the first year of the project by coupling the Biosphere-Atmosphere Transfer Scheme (BATS) with a proven two-dimensional model of the atmospheric boundary layer. The resulting model, BATS-ABL, is described in detail in a Masters thesis and reported in a paper in the Journal of Hydrology Objective 2: The potential value of the heuristic model was re-evaluated early in the project and a decision was made to focus subsequent research around modeling studies with the BATS-ABL model. The value of using such coupled surface-atmosphere models in this research area was further confirmed by the success of the Tucson Aggregation Workshop. Objective 3: There was excellent progress in using the BATS-ABL model to test aggregation rules for a variety of realistic covers. The foci of attention have been the site of the First International Satellite Land Surface Climatology Project Field Experiment (FIFE) in Kansas and one of the study sites of the Anglo-Brazilian Amazonian Climate Observational Study (ABRACOS) near the city of Manaus, Amazonas, Brazil. These two sites were selected because of the ready availability of relevant field data to validate and initiate the BATS-ABL model. The results of these tests are given in a Masters thesis, and reported in two papers. Objective 4: Progress far exceeded original expectations not only in reconciling BATS land covers with those that can be recognized from space, but also in then applying remotely-sensed land cover data to map aggregate values of BATS parameters for heterogeneous covers and interpreting these parameters in terms of surface-atmosphere exchanges.

Shuttleworth, W. James↗
NASA NTRS1995

Geology and landscape evolution of the Hellas region of Mars

Hellas basin on Mars has been the site of volcanism, tectonism, and modification by fluvial, mass-wasting, and eolian processes over its more than 4-b.y. existence. Our detailed geologic mapping and related studies have resulted in the following new interpretations. The asymmetric distribution of highland massifs and other structures that define the uplifted basin rim suggest a formation of the basin by the impact of a low-angle bolide having a trajectory heading S 60 deg E. During the Late Noachian, the basin was infilled, perhaps by lava flows, that were sufficiently thick (>1 km) to produce wrinkle ridges on the fill material and extensional faulting along the west rim of the basin. At about the same time, deposits buried northern Malea Planum, which are interpreted to be pyroclastic flows from Amphitrites and Peneus Paterae on the basis of their degraded morphology, topography, and the application of a previous model for pyroclastic volcanism on Mars. Peneus forms a distinctive caldera structure that indicates eruption of massive volumes of magma, whereas Amphitrites is a less distinct circular feature surrounded by a broad, low, dissected shield that suggests generally smaller volume eruptions. During the Early Hesperian, an approx. 1- to 2-km-thick sequence of primarily fined-grained, eolian material was deposited on the floor of Hellas basin. Subsequently, the deposit was deeply eroded, except where armored by crater ejecta, and it retreated as much as 200-300 km along its western margin, leaving behind pedestal craters and knobby outliers of the deposit. Local debris flows within the deposit attest to concentrations of groundwater, perhaps in part brought in by outflow floods along the east rim of the basin. These floods may have deposited approx. 100-200 m of sediment, subduing wrinkle ridges in the eastern part of the basin floor. During the Late Hesperian and Amazonian, eolian mantles were emplaced on the basin rim and floor and surrounding highlands. Their subsequent erosion resulted in pitted and etched plains and crater fill, irregular mesas, and pedestal craters. Local evidence occurs for the possible former presence of ground ice or ice sheets approx. 100 km across; however, we disagree with a hypothesis that suggests that the entire south rim and much of the floor of Hellas have been glaciated. Orientations of dune fields and yardangs in lower parts of Hellas basin follow directions of the strongest winds predicted by a recently published general circulation model (GCM). Transient frost and dust splotches in the region are, by contrast, related to the GCM prediction for the season in which the images they appear in were taken.

Tanaka, Kenneth L.↗
NASA NTRS1998

Exploration of the Moon with Remote Sensing, Ground-Penetrating Radar, and the Regolith-Evolved Gas Analyzer (REGA)

There are two important reasons to explore the Moon. First, we would like to know more about the Moon itself: its history, its geology, its chemistry, and its diversity. Second, we would like to apply this knowledge to a useful purpose. namely finding and using lunar resources. As a result of the recent Clementine and Lunar Prospector missions, we now have global data on the regional surface mineralogy of the Moon, and we have good reason to believe that water exists in the lunar polar regions. However, there is still very little information about the subsurface. If we wish to go to the lunar polar regions to extract water, or if we wish to go anywhere else on the Moon and extract (or learn) anything at all, we need information in three dimensions an understanding of what lies below the surface, both shallow and deep. The terrestrial mining industry provides an example of the logical steps that lead to an understanding of where resources are located and their economic significance. Surface maps are examined to determine likely locations for detailed study. Geochemical soil sample surveys, using broad or narrow grid patterns, are then used to gather additional data. Next, a detailed surface map is developed for a selected area, along with an interpretation of the subsurface structure that would give rise to the observed features. After that, further sampling and geophysical exploration are used to validate and refine the original interpretation, as well as to make further exploration/ mining decisions. Integrating remotely sensed, geophysical, and sample datasets gives the maximum likelihood of a correct interpretation of the subsurface geology and surface morphology. Apollo-era geophysical and automated sampling experiments sought to look beyond the upper few microns of the lunar surface. These experiments, including ground-penetrating radar and spectrometry, proved the usefulness of these methods for determining the best sites for lunar bases and lunar mining operations.

Cooper, B. L.↗
NASA NTRS2001

Joint Characterization of Vegetation by Satellite Observations from Visible to Microwave Wavelengths - A Sensitivity Analysis

This study presents an evaluation and comparison of visible, near-infrared, passive, and active microwave observations for vegetation characterization on a global basis for a year, with spatial resolution compatible with climatological studies. Visible and near-infrared observations along with the Normalized Difference Vegetation Index come from the Advanced Very High Resolution Radiometer. An atlas of monthly mean microwave land surface emissivities from 19 to 85 GHz has been calculated from the Special Sensor Microwave/Imager for a year, suppressing the atmospheric problems encountered with the use of simple channel combinations. The active microwave measurements are provided by the ERS-1 scatterometer at 5.25 GHz. The capacity to discriminate between vegetation types and to detect the vegetation phenology is assessed in the context of a vegetation classification obtained from in situ observations. A clustering technique derived from the Kohonen topological maps is used to merge the three data sets and interpret their relative variations. NDVI varies with vegetation density but is not very sensitive in semiarid environments and in forested areas. Spurious seasonal cycles and large spatial variability in several areas suggest that atmospheric contamination and/or solar zenith angle drift still affect the NDVI.

NORMALIZED DIFFERENCE VEGETATIVE INDEX↗
DOE OSTI2025

Wide‐Field Bond Quality Evaluation Using Frequency Domain Thermoreflectance with Deep Neural Network Feature Reconstruction

Heterogeneous integration of microelectronic components provides a pathway to improve circuit/component performance; however, this comes with assembly challenges, in particular due to complex interfaces via subsurface bump bonds. The ability of these bonds to transmit electrical signals and conduct heat to the carrier substrate limits component performance. In this work, hyperspectral frequency‐domain thermoreflectance (FDTR) imaging is demonstrated as a robust technique for evaluating the quality of subsurface indium bump bonds in a surrogate microelectronic sample. By performing microscale FDTR imaging with coarse motion image stitching, thermal phase maps that cover a 4 mm by 4 mm field‐of‐view with subsurface feature sensitivity at depths greater than 50 µm are obtained. The resulting FDTR hyperspectral data contains more than three million pixels and reveal the quality of subsurface microbump arrays. Wide‐field analysis of bonded versus gap regions is enabled by deep neural network feature reconstruction, that after training, rapidly provides an interpretable representation of bond quality. Utility of noisy higher frequency FDTR phase maps, i.e., near the computationally predicted sensing depth limit, results in an average prediction error of 11%. Taken together, FDTR with neural network‐based analysis demonstrates subsurface bond monitoring at length scales relevant for heterogeneously integrated microelectronics.

FDTR↗
DOE OSTI2023

Controller area network decoder (CAN-D)

A system and method for decoding an unknown automotive controller area network (“CAN”) message definitions. CAN data vehicle signal mappings are typically held in secret and varied by automotive model and year. Without knowledge of the mappings, the wealth of real-time vehicle data hidden in the automotive CAN packets is uninterpretable—impeding research, after-market tuning, efficiency and performance monitoring, fault diagnosis, and privacy-related technologies. This technology can ascertain the CAN signals' boundaries (start bit and length), endianness (byte ordering), signedness (binary-to-integer encoding) from raw CAN data. This allows conversion of CAN data to time series. Interpreting the translated CAN data's physical meaning and finding a linear mapping to standard units (e.g., knowing the signal is speed and scaling values to represent units of miles per hour) can be achieved for many signals by leveraging diagnostic standards to obtain real-time measurements of in-vehicle systems. The system and method can be integrated into lightweight hardware enabling an OBD-II plugin for real-time in-vehicle CAN decoding or run on standard computers. The system can output a standard DBC file with the signal definition information.

Verma, Kiren E.↗
DOE OSTI2024

System for controller area network payload decoding

A system for decoding an unknown automotive controller area network (“CAN”) message definitions. CAN data vehicle signal mappings are typically held in secret and varied by automotive model and year. Without knowledge of the mappings, the wealth of real-time vehicle data hidden in the automotive CAN packets is uninterpretable—impeding research, after-market tuning, efficiency and performance monitoring, fault diagnosis, and privacy-related technologies. This system can ascertain the CAN signals' boundaries (start bit and length), endianness (byte ordering), signedness (binary-to-integer encoding) from raw CAN data. This allows conversion of CAN data to time series. Interpreting the translated CAN data's physical meaning and finding a linear mapping to standard units (e.g., knowing the signal is speed and scaling values to represent units of miles per hour) can be achieved for many signals by leveraging diagnostic standards to obtain real-time measurements of in-vehicle systems. The system can be integrated into lightweight hardware enabling an OBD-II plugin for real-time in-vehicle CAN decoding or run on standard computers. The system can output a standard DBC file with the signal definition information.

Verma, Kiren E.↗
NASA NTRS1981

Evaluation of SLAR and thematic mapper MSS data for forest cover mapping using computer-aided analysis techniques

Training and test data sets for CAM1S from NS-001 MSS data for two dates (geometrically adjusted to 30 meter resolution) were used to evaluate wavelength band. Two sets of tapes containing digitized HH and HV polarization data were obtained. Because the SAR data on the 9 track tapes contained no meaningful data, the 7 track tapes were copied onto 9 track tapes at LARS. The LARSYS programs were modified and a program was written to reformat the digitized SAR data into a LARSYS format. The radar imagery is being qualitatively interpreted. Results are to be used to identify possible cover types, to produce a classification map to aid in the numerical evaluation classification of radar data, and to develop an interpretation key for radar imagery. The four spatial resolution data sets were analyzed. A program was developed to reduce the spatial distortions resulting from variable viewing distance, and geometrically adjusted data sets were generated. A flowchart of steps taken to geometrically adjust a data set from the NS-001 scanner is presented.

Hoffer, R. M.↗
DOE OSTI2024

New Tank Mapping Method Improves Waste Removal Process

Savannah River Mission Completion is the Liquid Waste (LW) contractor at the Savannah River Site (SRS). The LW mission is tasked with treating and disposing of legacy nuclear waste. There are multiple facilities involved in this work, including the Concentration, Storage, and Transfer Facilities (CSTF), the Defense Waste Processing Facility (DWPF), the Salt Waste Processing Facility (SWPF), and the Saltstone Production Facility (SPF). The CSTF includes 43 underground waste tanks used to store and support processing of radioactive liquid waste. Waste removal activities, such as salt dissolution campaigns and sludge agitation, are conducted within the CSTF waste tanks to convert the waste into a form that allows for downstream processing at other LW facilities. While performing these waste removal campaigns, camera inspections are performed to assess the quantity and distribution of the remaining waste within the waste tank (i.e. saltcake or sludge). Understanding the quantity and distribution of the salt/sludge within the waste tanks allows for improved waste removal strategies (e.g. mixing pump operation) and refined safety controls. Typically, several camera inspections are performed during a waste removal transfer to verify the elevation of the visible salt/sludge mounds against the known elevation of the liquid surface. The camera inspection footage must then be interpreted by a trained engineer who will develop a 2-D map that depicts the waste distribution at various elevations within the waste tank. This tank mapping is then used in conjunction with conservative assumptions to evaluate the volume of saltcake or sludge that is present within the waste tank.

Mini, Melany↗
NASA NTRS1981

Earth Survey Applications Division

Accomplishments of research and data analysis conducted to study physical parameters and processes inside the Earth and on the Earth's surface, to define techniques and systems for remotely sensing the processes and measuring the parameters of scientific and applications interest, and the transfer of promising operational applications techniques to the user community of Earth resources monitors, managers, and decision makers are described. Research areas covered include: geobotany, magnetic field modeling, crustal studies, crustal dynamics, sea surface topography, land resources, remote sensing of vegetation and soils, and hydrological sciences. Major accomplishments include: production of global maps of magnetic anomalies using Magsat data; computation of the global mean sea surface using GEOS-3 and Seasat altimetry data; delineation of the effects of topography on the interpretation of remotely-sensed data; application of snowmelt runoff models to water resources management; and mapping of snow depth over wheat growing areas using Nimbus microwave data.

Carpenter, L.↗
DOE OSTI2025

Isochronous and period-doubling diagrams for symplectic maps of the plane

Symplectic mappings of the plane serve as key models for exploring the fundamental nature of complex behavior in nonlinear systems. Central to this exploration is the effective visualization of stability regimes, which enables the interpretation of how systems evolve under varying conditions. While the area-preserving quadratic Hénon map has received significant theoretical attention, a comprehensive description of its mixed parameter-space dynamics remain lacking. This limitation arises from early attempts to reduce the full two-dimensional phase space to a one-dimensional projection, a simplification that resulted in the loss of important dynamical features. Consequently, there is a clear need for a more thorough understanding of the underlying qualitative aspects. This paper aims to address this gap by revisiting the foundational concepts of reversibility and associated symmetries, first explored in the early works of G.D. Birkhoff. We extend the original framework proposed by Hénon by adding a period-doubling diagram to his isochronous diagram, which allows to represents the system’s bifurcations and the groups of symmetric periodic orbits that emerge in typical bifurcations of the fixed point. A qualitative and quantitative explanation of the main features of the region of parameters with bounded motion is provided, along with the application of this technique to other symplectic mappings, including cases of multiple reversibility. Modern chaos indicators, such as the Reversibility Error Method (REM) and the Generalized Alignment Index (GALI), are employed to distinguish between various dynamical regimes in the mixed space of variables and parameters. These tools prove effective in differentiating regular and chaotic dynamics, as well as in identifying twistless orbits and their associated bifurcations. Additionally, we discuss the application of these methods to real-world problems, such as visualizing dynamic aperture in accelerator physics, where our findings have direct relevance.

43 PARTICLE ACCELERATORS↗
NASA NTRS2003

Satellite-Altitude Geopotential Study of the Kursk Magnetic Anomaly (KMA)

With the successful launch of the Orsted, SAC-C and CHAMP satellites we are able to make both magnetic and gravity anomaly maps of the Earth's crust; magnetic from all three missions and gravity with CHAMP. We have used these data to study the KMA area of Russia. This is an important region for several reasons: (1) we have already made satellite magnetic anomaly maps of this region and they can be integrated with the gravity data from CHAMP for a comprehensive interpretation; (2) KMA contains the largest know reserves of iron-ore in the world; and (3) there are significant ground truth data available for this region from aeromagnetic, balloon surveys and geophysical mapping, including extensive rock magnetic/paleo-magnetic and geologic studies. Utilizing the gravity observations, collocated with the magnetic data enabled us to make a joint interpretation. While there is a high amplitude magnetic anomaly recorded over the KMA the gravity anomaly at satellite altitude revealed by CHAMP is only around 3-6 mGal but is not centered on the magnetic high. This would indicate that despite the fact that in the region of the KMA the rocks have a higher percentage of iron than in the surrounding formations the entire area is Archean-Proterozoic in age and therefore very dense.

Taylor, Patrick T.↗
NASA NTRS1983

The Ponta Grossa Arch: A proposal for ts configuration and evolution from the interpretation of remote sensing data

Visual analysis of MSS imagery was used to construct a map of dikes in a wide area of the Ponta Grossa Arch both in the Parana Basin and its basement. Analysis of the map by photographic methods defined the zone of highest density of the dikes, and some aspects of the longitudinal and transverse heterogeneities, as well as localized the apex of the Arch. Borders of the Arch were also suggested. Field investigations confirmed the position of the apex of the flexure on Palezoic sediments and pre-lava Mesozoic sediments. Controversial aspects of the relative absence of dikes in certain units or lithologies and the composition of intrusions surrounding the city of Castro were observed. The apparent synchronism between the activity of the Parana Basin and the Arch is discussed as well as the frequent inverse characteristics of vertical movements. The similarity of rocks in Brazil and Africa is also considered.

Parada, N. D. J.↗
NASA NTRS2021

Inversion of Magnetic Measurements of the Swarm A Satellite of the Bangui Magnetic Anomaly

We wanted to make a satellite altitude magnetic anomaly map of the large magnetic anomaly in the Central African Republic, the Bangui magnetic anomaly, with data from the Swarm satellites. In the first part of our study, we summarize the earlier investigations and their interpretation. In the second we discuss our data processing applied to produce a magnetic anomaly map. We used the IGRF 12th to remove the long-wavelength regional anomalies. We will use an inverse procedure, which always requires a solution of the direct problem, and a horizontal polygonal prism given in the Descartes coordinate system. For this, reason the total magnetic anomaly was transformed into the Descartes coordinate system. The magnetization and its direction were used from our previous paper. The inverse problem is solved by the Simplex procedure. Our selected polygon has 14 geometrical parameters however, the inverse problem that is the numerical determination of the minimum problem is solved in the 14 dimensions. The result of our inverse problem was the 12 horizontal coordinates and the two upper and lower data of the polygon. The origin of the Bangui anomaly has been discussed in several scientific reports, either as a deep crustal tectonic feature or the result of a large external impactor. However, according to our inversion computations we cannot make any unambiguous finding for the origin of this feature. The inaccuracy in our total anomaly map is given by the Gaussian error propagation.

KI Kis↗
NASA NTRS1976

Applied photo interpretation for airbrush cartography

Lunar and planetary exploration has required the development of new techniques of cartographic portrayal. Conventional photo-interpretive methods employing size, shape, shadow, tone, pattern, and texture are applied to computer-processed satellite television images. Comparative judgements are affected by illumination, resolution, variations in surface coloration, and transmission or processing artifacts. The portrayal of tonal densities in a relief illustration is performed using a unique airbrush technique derived from hill-shading of contour maps. The control of tone and line quality is essential because the mid-gray to dark tone densities must be finalized prior to the addition of highlights to the drawing. This is done with an electric eraser until the drawing is completed. The drawing density is controlled with a reflectance-reading densitometer to meet certain density guidelines. The versatility of planetary photo-interpretive methods for airbrushed map portrayals is demonstrated by the application of these techniques to the synthesis of nonrelief data.

Inge, J. L.↗
NASA NTRS1974

Automated strip-mine and reclamation mapping from ERTS

The author has identified the following significant results. Computer processing techniques were applied to ERTS-1 computer-compatible tape (CCT) data acquired in August 1972 on the Ohio Power Company's coal mining operation in Muskingum County, Ohio. Processing results succeeded in automatically classifying, with an accuracy greater than 90%: (1) stripped earth and major sources of erosion; (2) partially reclaimed areas and minor sources of erosion; (3) water with sedimentation; (4) water without sedimentation; and (5) vegetation. Computer-generated tables listing the area in acres and square kilometers were produced for each target category. Processing results also included geometrically corrected map overlays, one for each target category, drawn on a transparent material by a pen under computer control. Each target category is assigned a distinctive color on the overlay to facilitate interpretation. The overlays, drawn at a scale of 1:250,000 when placed over an AMS map of the same area, immediately provided map locations for each target. These mapping products were generated at a tenth of the cost of conventional mapping techniques.

Rogers, R. H.↗