Search NASA⌕ Search

SEARCH · Search NASA

Results for “matrix structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

Fabrication and Characterization of SMA Hybrid Composites

Results from an effort to fabrication shape memory alloy hybrid composite (SMAHC) test specimens and characterize the material system are presented in this study. The SMAHC specimens are conventional composite structures with an embedded SMA constituent. The fabrication and characterization work was undertaken to better understand the mechanics of the material system, address fabrication issues cited in the literature, and provide specimens for experimental validation of a recently developed thermomechanical model for SMAHC structures. Processes and hardware developed for fabrication of the SMAHC specimens are described. Fabrication of a SMA14C laminate with quasi-isotropic lamination and ribbon-type Nitinol actuators embedded in the 0' layers is presented. Beam specimens are machined from the laminate and are the focus of recent work, but the processes and hardware are readily extensible to more practical structures. Results of thermomechanical property testing on the composite matrix and Nitinol ribbon are presented. Test results from the Nitinol include stress-strain behavior, modulus versus temperature. and constrained recovery stress versus temperature and thermal cycle. Complex thermomechanical behaviors of the Nitinol and composite matrix are demonstrated, which have significant implications for modeling of SMAHC structures.

Turner, Travis L.↗
NASA NTRS1989

Identification of local modes using modal mass distributions

An approach for local modal identification using a modal mass spatial distribution matrix is proposed. This modal mass matrix is obtained by overlay multiplying the modal matrix to the product of the mass and the modal matrices of the structure. Each column in the spatial modal mass matrix can be interpreted as a measure of the kinetic energy distribution over the physical degrees of freedom for the corresponding mode. Local modes are identified due to the highly concentrated kinetic energy distribution in the localized regions. This spatial modal mass approach is more sensitive than the modal amplitude ratio method, since kinetic energy is in the quadratic form of modal amplitudes. Numerical examples involving identification of local modes using the proposed modal mass spatial distribution matrix approach are presented and discussed.

Chou, Chaur-Ming↗
NASA NTRS2008

NanoSIMS Sheds Light on the Origin and Significance of Early Archean Organic Microstructures from the Pilbara of Australia

NanoSIMS was used to characterize sub-micron scale morphology and elemental composition (C, N, S, Si, O) of organic microstructures in Early Archean (3 - 3.4 Ga) charts from the Pilbara of Western Australia. Three categories of structures were analyzed: small spheroids in clusters; spindle-shaped remains; and large spheroids. All are relatively poorly preserved and occur within the chert matrix of the samples. Carbonaceous material in a secondary hydrothermal vein also was analyzed, as an example of non-indigenous organic matter. Comparisons were made of NanoSIMS characteristics of the Archean samples and those from well-preserved, biogenic microfossils in the 0.8 Ga Bitter Springs Formation. The comparisons show that the Pilbara microstructures are generally distinct from material in the hydrothermal vein but similar in morphology and elemental composition to the Bitter Springs microfossils. In addition, the Pilbara structures exhibit a spatial relationship to silicon and oxygen that seemingly reflects silica nucleation on organic surfaces; this argues that the organic frameworks of the Archean structures were present in the sediment during crystallization of the silica matrix. The structures are thus interpreted as being indigenous to the enclosing sediment. While these results are suggestive of Early Archean biogenicity and are consistent with a growing body of data suggesting that life on Earth was well established by 3 to 3.4 Ga, work is continuing to determine the N/C and 13C ratios of individual forms, and this should provide additional insight into the derivation and significance of these ancient organic remains.

Oehler, Dorothy Z.↗
NASA NTRS1998

High Speed Research: Propulsion Project Accomplishments

This past year has been one of great accomplishment for the propulsion element of NASA's High Speed Research (HSR) Program. The HSR Program is a NASA/industry partnership to develop the high-risk/high-payoff airframe and propulsion technologies applicable to a second-generation supersonic commercial transport, or High Speed Civil Transport (HSCT). The propulsion element, which also involves industry partners, is managed by the NASA Lewis Research Center. These technologies will contribute greatly to U.S. industry's ability to make an informed product launch decision for an HSCT vehicle. Specific NASA Lewis accomplishments in 1997 include: 1. Small-scale combustor sector tests conducted in Lewis' Engine Research Building contributed to the evolution of approaches to developing a combustor with ultralow NOx emissions. 2. Components were tested in Lewis' CE-9 facility (in Lewis' Engine Research Building) to assess the performance of candidate ceramic matrix composite (CMC) materials in this realistic combustion environment. Test results were promising, and acceptable levels of structural durability were demonstrated for the ceramic matrix composite material tested. Ceramic matrix composites continue to show great promise for use in HSCT combustor liners. 3. Engine emissions tests in Lewis' Propulsion Systems Laboratory provided insight into other classes of emissions (e.g., particulates and aerosols) which will be important to control in HSCT propulsion system designs. 4. Small-scale nozzle tests conducted in Lewis' Aero-Acoustic Propulsion Laboratory are contributing to the design of a low-noise, high-performance mixer/ejector nozzle configuration for HSCT engines. Over 18,000 hours of durability testing were completed in Lewis' materials laboratories to evaluate superalloy and g-titanium aluminide performance for HSCT nozzle applications. A two-dimensional supersonic inlet concept was tested in Lewis' 10- by 10-Foot Supersonic Wind Tunnel. The extensive database and the knowledge gained contributed to the selection of a two-dimensional inlet as the preferred inlet concept for the HSR Program.

Shaw, Robert J.↗
NASA NTRS1997

Computational Simulation of Composite Behavior

Composite microfracture technique developed here is based on the concept of global strain energy release rate. Step-by-step procedures were outlined to evaluate composite microfracture. The technique can predict microfracture initiation/propagation, predict the "structural fracture toughness", and establish the hierarchy of fracture modes. Both unidirectional and cross-ply metal-matrix composite laminates were evaluated for microfracture, subjected to thermal and mechanical loads. Five NASA reports were published as shown in the bibliography and several presentations were made at the technical conferences/ symposia. Work was also performed to develop simplified micromechanics and macromechanics for ceramic matrix composites. A novel fiber sub-structuring technique was developed, which divides the fiber into several "slices" and applies the micromechanics equation at the "slice" level, which are then integrated upwards to get the ply and the laminate properties. It allows for a more accurate representation of interfacial conditions such as partial interface bond etc. It also predicts the stress-strain behavior of a composite up to failure by taking into account material properties dependence upon temperature as well as stress redistribution that occurs due to damage initiation and propagation. A computer code CEMCAN (Ceramic Matrix Composites Analyzer) which includes all these capabilities has been developed as a part of this research activity.

Keith, Theo G., Jr.↗
DOE OSTI2025

Novel Zwitterionic Polyurethane-in-Salt Electrolytes with High Ion Conductivity, Elasticity, and Adhesion for High-Performance Solid-State Lithium Metal Batteries

This study presents a novel polymer-in-salt (PIS) zwitterionic polyurethane-based solid polymer electrolyte (zPU-SPE) that offers high ionic conductivity, strong interaction with electrodes, and excellent mechanical and electrochemical stabilities, making it promising for high-performance all solid-state lithium batteries (ASSLBs). The zPU-SPE exhibits remarkable lithium-ion (Li+) conductivity (3.7 × 10⁻⁴ S cm−1 at 25 °C), enabled by exceptionally high salt loading of up to 90 wt.% (12.6 molar ratio of Li salt to polymer unit) without phase separation. It addresses the limitations of conventional SPEs by combining high ionic conductivity with a Li+ transference number of 0.44, achieved through the incorporation of zwitterionic groups that enhance ion dissociation and transport. The high surface energy (338.4 J m−2) and elasticity ensure excellent adhesion to Li anodes, reducing interfacial resistance and ensuring uniform Li+ flux. When tested in Li||zPU||LiFePO₄ and Li||zPU||S/C cells, the zPU-SPE demonstrated remarkable cycling stability, retaining 76% capacity after 2000 cycles with the LiFePO4 cathode, and achieving 84% capacity retention after 300 cycles with the S/C cathode. Molecular simulations and a range of experimental characterizations confirm the superior structural organization of the zPU matrix, contributing to its outstanding electrochemical performance. The findings strongly suggest that zPU-SPE is a promising candidate for next-generation ASSLBs.

Wang, Kun↗
DOE OSTI2025

Thermal conductivity measurement of U-Mo and U-Mo/Al interaction layers generated from in-pile irradiation using the suspended-bridge method

Here, this study presents the first measurement of the individual thermal conductivity of U-7wt.%Mo fuel particles and U-Mo/Al interaction layers (ILs) from in-pile irradiated dispersion fuel plates, using the suspended-bridge method. Nanorods of U-7wt.%Mo fuel and U-Mo/Al ILs were extracted by focused ion beam (FIB), and their microstructures were characterized with transmission electron microscopy (TEM). TEM revealed finely distributed nanobubbles in the U-7wt.%Mo matrix, along with an amorphous structure in the ILs. The thermal conductivity of in-pile irradiated U-7wt.%Mo was approximately 30% lower than that of the unirradiated material, ranging from 6.7 W/m·K at 300 K to 8.5 W/m·K at 380 K. The ILs exhibited even lower thermal conductivity, from 2.1 W/m·K at 300 K to 2.7 W/m·K at 380 K. These reductions, attributed to nanobubbles, fission products, and irradiation-induced point defects, were analyzed through a combination of microstructural characterization and literature-based transport models, which successfully reproduced the observed degradation trends.

42 - ENGINEERING↗
DOE OSTI2025

Understanding Peelle’s Pertinent Puzzle bias in generalized least squares regression through eigenspectrum analysis

Certain correlation structures in the data covariance matrix (DCM) used for generalized least squares (GLS) regression can result in biased estimates, commonly known in the field of nuclear data evaluation as Peele’s Pertinent Puzzle (PPP). This article introduces a generative, forward modeling framework within which the PPP bias is characterized through an eigenspectrum analysis of the DCM. This analysis highlights the root cause of the bias, generalizes the problem beyond the nuclear data field, and provides insight to the problem regimes where it can occur. What follows is an understanding that the bias can show up for any experimental neutron time-of-flight data for which systematic uncertainties have been quantified. Lastly, a discussion of the adaptation of cross validation approaches that require pre-whitening to incorporate the known ‘fix’ to the PPP bias in the GLS estimator.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Variance reduction in lattice QCD observables via normalizing flows

Normalizing flows can be used to construct unbiased, reduced-variance estimators for lattice field theory observables that are defined by a derivative with respect to action parameters. This work implements the approach for observables involving gluonic operator insertions in the SU(3) Yang-Mills theory and two-flavor QCD in four space-time dimensions. Variance reduction by factors of 10–60 is achieved in glueball correlation functions and in gluonic matrix elements related to hadron structure, with demonstrated computational advantages. The observed variance reduction is found to be approximately independent of the lattice volume, so volume transfer can be utilized to minimize training costs.

Abbott, Ryan [Columbia U.; MIT, Cambridge, CTP; IA↗
DOE OSTI2024

Scalable Tensor Methods for Nonuniform Hypergraphs

While multilinear algebra appears natural for studying the multiway interactions modeled by hypergraphs, tensor methods for general hypergraphs have been stymied by theoretical and practical barriers. A recently proposed adjacency tensor is applicable to nonuniform hypergraphs, but is prohibitively costly to form and analyze in practice. We develop tensor times same vector (TTSV) algorithms for this tensor which improve complexity from $O(n^r)$ to a low-degree polynomial in $r$, where $n$ is the number of vertices and $r$ is the maximum hyperedge size. Our algorithms are implicit, avoiding formation of the order $r$ adjacency tensor. Here, we demonstrate the flexibility and utility of our approach in practice by developing tensor-based hypergraph centrality and clustering algorithms. We also show these tensor measures offer complementary information to analogous graph-reduction approaches on data, and are also able to detect higher-order structure that many existing matrix-based approaches provably cannot.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Detailed Method for the Purification of Rhamnogalacturonan-I (RG-I) in Arabidopsis thaliana

The plant cell wall is a dynamic and complex extracellular matrix that not only provides structural integrity and determines cell shape but also mediates intercellular communication. Among its major components, pectins play essential roles in cell adhesion, wall porosity, hydration, and flexibility. Rhamnogalacturonan-I (RG-I), a structurally diverse pectic polysaccharide, remains one of the least understood components of the plant cell wall. Its backbone is substituted with arabinan, galactan, and arabinogalactan side chains that vary in length, branching, and composition across tissues, species, and developmental stages. In addition, RG-I can undergo modifications such as backbone acetylation, further contributing to its structural complexity and functional diversity. To advance understanding of RG-I, we present a detailed method for isolating RG-I from the model plant Arabidopsis thaliana . Leveraging Arabidopsis as a model system provides major advantages owing to its well-characterized genome and powerful molecular toolkit, enabling deeper investigation into the roles of RG-I in plant development and responses to environmental stress. Our method consists of two major steps: an initial chemical extraction using oxalate, followed by endo-polygalacturonase (EPG) digestion to fragment the pectic domains. An advantage of this approach is that it produces a dry material that can be stored at room temperature without special handling and does not introduce chemicals that may interfere with downstream analyses. The purified RG-I can be used for detailed compositional and structural analyses, as well as for functional studies of enzymes involved in pectin biosynthesis, modification, and degradation. Although this protocol was developed for isolating RG-I from Arabidopsis rosette leaves, it is also applicable to other Arabidopsis organs and other plant species.

25 ENERGY STORAGE↗
NASA NTRS1972

The optimal control of merging aircraft - Implementation of the hybrid air traffic controller.

The control of merging aircraft is formulated as a finite-time, quadratic optimal control problem of a linear system with state and control constraints. The purpose of this paper is to demonstrate that the Hybrid Air Traffic Controller (HAC), which has been previously developed as a solution to this problem, may be easily implemented. Use is made of both the properties of the algebraic solution to the matrix Riccati equation and the structure of the linear model. This approach results in a real-time synthesis procedure for the HAC which does not rely on iterative numerical integration techniques.

Schatz, J. G.↗
NASA NTRS1973

Control optimization, stabilization and computer algorithms for aircraft applications

Computationally useful algorithms are considered that can aid the control engineer in designing systems control in linear time invariant dynamics for aircraft applications. Structural aspects of system identification, matrix parameterization, and the effect of feedback on identifiability of systems. Adaptive and stochastic control model constructions are projected, and a method for approximate identification of aircraft characteristics and subsequent generation of control signals is outlined.

Mitter, S. K.↗
NASA NTRS1973

Phenylquinoxaline copolymers

The preparation of a series of homopolymers and block and random type phenylquinoxaline copolymers is described together with their important characteristics and preliminary measurements of composite properties. Phenylquinoxaline homopolymers consisting of low, intermediate, and high molecular weight versions were prepared from the reaction of 3,3'-diaminobenzidine (DAB) and 3,3',4,4'-tetraaminobenzophenone (TAB), each with p-bis(phenylglyoxalyl)benzene as solutions (18% solids content) in a 1:1 mixture of m-cresol and xylene. Three random and three block copolymers were prepared from the reaction of various amounts of DAB and TAB with p-bis(phenylglyoxalyl)benzene. The copolymers were prepared with DAB to TAB distribution ratios of 3:1, 1:1, and 1:3. The work was performed primarily to determine if phenylquinoxaline copolymers exhibit any advantage over the homopolymers for use as functional or structural resins, especially as a matrix material in combination with a high-modulus graphite fiber reinforcement.

Hergenrother, P. M.↗
NASA NTRS1974

Design guidelines for advanced LSI microcircuit packaging using thick film multilayer technology

Ceramic multilayer circuitry results from the sequential build-up of two or more layers of pre-determined conductive interconnections separated by dielectric layers and fired at an elevated temperature to form a solidly fused structure. The resultant ceramic interconnect matrix is used as a base to mount active and passive devices and provide the necessary electrical interconnection to accomplish the desired electrical circuit. Many methods are known for developing multilevel conductor mechanisms such as multilayer printed circuits, welded wire matrices, flexible copper tape conductors, and thin and thick-film ceramic multilayers. Each method can be considered as a specialized field with each possessing its own particular set of benefits and problems. This design guide restricts itself to the art of design, fabrication and assembly of ceramic multilayer circuitry and the reliability of the end product.

Peckinpaugh, C. J.↗
NASA NTRS1976

A NASTRAN implementation of the doubly asymptotic approximation for underwater shock response

A detailed description is given of how the decoupling approximation known as the doubly asymptotic approximation is implemented with NASTRAN to solve shock problems for submerged structures. The general approach involves locating the nonsymmetric terms (which couple structural and fluid variables) on the right hand side of the equations. This approach results in coefficient matrices of acceptable bandwidth but degrades numerical stability, requiring a smaller time step size than would otherwise be used. It is also shown how the structure's added (virtual) mass matrix, is calculated with NASTRAN.

Everstine, G. C.↗
NASA NTRS1979

Interim results of Thermid 600 engineering development

Thermid 600 was developed and evaluated as a matrix material for advanced composite structure applications in harsh environments. Prepreg work needed to develop a versatile and reproducible prepreg and fabrication work needed to develop laminate and structural shape processing methods are described. The use of reactive diluents in resin mixture studies with heat resin screening, prepreg process scaleup, and selection of final candidate are discussed.

Hoffman, R. D.↗