Search NASA⌕ Search

SEARCH · Search NASA

Results for “pine”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Surveying Dead Trees and CO2-Induced Stressed Trees Using AVIRIS in the Long Valley Caldera

Since 1980 the Long Valley Caldera in the eastern Sierra Nevada (California) has shown signs of renewed volcanic activity. Frequent earthquakes, a re-inflation of the caldera, hydrothermal activity and gas emissions are the outer symptoms of this renewed activity. In 1990 and 1991 several areas of dying trees were found around Mammoth Mountain. The cause of the die off of the trees was first sought in the persistent drought in the preceding years. However, the trees died regardless of age and species. Farrar et al. (1995) started a soil-gas survey in 1994 in the dead-tree areas and found carbon dioxide concentrations ranging from 30 to 96% at soil depths between 30 and 60 cm. CO2 concentrations in the atmosphere are usually around 0.03% and in the soil profile CO2 levels do commonly not exceed 4 to 5%. Although not much is known about the effect of high levels of carbon dioxide in the soil profile on roots, it is most likely that the trees are dying due to oxygen deprivation: the CO2 drives the oxygen out of the soil. So far, four sites of dead trees have been mapped around Mammoth Mountain. The two largest dying trees sites are located near Horseshoe Lake and near Mammoth Mountain Main Lodge covering approximately an area of 10 and 8 ha respectively. Analysis of the gas composition regarding the He-3/He-4 ratio and the percentage biogenic carbon reveals the source of the gas: the magma body beneath the Long Valley Caldera. Until recently it was not known that volcanoes release abundant carbon dioxide from their flanks as diffuse soil emanations. As a result of the magma gas emission around Mammoth Mountain there is an excellent sequence of dead trees, stressed trees, healthy trees and bare soil surfaces. This research site provides excellent opportunities to: (1) Study the capabilities of imaging spectrometry to map stressed (and dead) pine and fir species; (2) Study methods to separate the vivid vegetation, stressed vegetation and dead vegetation from the soil background of glacial deposits and crystalline rocks. The dead tree areas are located on the flanks of Mammoth Mountain (N:37 deg 37' 45" and W:119 deg 02' 05") at an elevation between 2600 and 3000 meters. The area is covered by an open type of Montane Forest. The dominant tree species are Lodgepole Pine (Pinus contorta), the Red Fir (Abies magnifica) and the Jeffrey Pine (Pinus jeffreyi). The soil surface near Horseshoe Lake is generally fairly bright. The surface is covered by glacial deposits (till) consisting mainly of weathered granitic rocks.

deJong, Steven M.↗
NASA NTRS2000

BOREAS TE-12 SSA Shoot Geometry Data

The Boreal Ecosystem-Atmospheric Study (BOREAS) TE-12 (Terrestrial Ecology) team collected shoot geometry data in 1993 and 1994 from aspen, jack pine, and black spruce trees. Collections were made at the Southern Study Area Nipawin Fen Site (SSA FEN), Young Jack Pine (YJP), Old Jack Pine (OJP), Old Aspen (OA), Young Aspen (YA), Mixed Site (MIX), and Old Black Spruce (OBS) sites. A caliper was used to measure shoot and needle lengths and widths. A volume displacement procedure was used to measure the weight of the shoot or twig submerged in water. The data files are available on a CD-ROM (see document number 20010000884), or from the Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC).

Hall, Forrest G.↗
NASA NTRS2000

BOREAS TGB-8 Photosynthetic Rate Data over the SSA-OBS and the SSA-OJP

The BOREAS TGB-8 team collected data to investigate the controls over NMHC fluxes from boreal forest tree species. This data set includes measurements of photosynthetic rates at mature jack pine and black spruce sites. The data were collected at the OJP and OBS tower flux locations in the BOREAS SSA. These areas contained mature stands of jack pine and black spruce and were the focal sites in the BOREAS program for studies of biosphere/atmosphere exchange from these two habitat types. The OBS site is situated in a black spruce/sphagnum bog with the largest trees 155 years old and 10-15 m tall. The OJP site is in a jack pine forest, 80 to 120 years old, which lies on a sandy bench of glacial outwash with the largest tree standing 15 m tall. Temporally, the data cover the period of 24-May-1994 to 19-Sep-1994. The data are stored in tabular ASCII files.

Hall, Forrest G.↗
NASA NTRS2000

BOREAS TGB-8 Starch Concentration Data Over the SSA-OBS and the SSA-OJP

The BOREAS TGB-8 team collected data to investigate the controls over NMHC fluxes from boreal forest tree species. This data set includes measurements of starch concentrations in foliar samples at mature jack pine and black spruce sites. The data were collected at the OJP and OBS tower flux locations in the BOREAS SSA. These areas contained mature stands of jack pine and black spruce and were the focal sites in the BOREAS program for studies of biosphere/atmosphere exchange from these two habitat types. The OBS site is situated in a black spruce/sphagnum bog with the largest trees 155 years old and 10-15 m tall. The OJP site is in a jack pine forest, 80 to 120 years old, which lies on a sandy bench of glacial outwash with the largest tree standing 15 m tall. Temporally, the data cover the period of 24-May-1994 to 19-Sep-1994. The data are stored in tabular ASCII files.

Lerdau, Manuel↗
NASA NTRS2001

Surface Elevation Changes in West Antarctica from Satellite Altimetry: Mass Balance Implications

Time-series of surface elevation change, which are constructed from 7-years (1992-1999) of ERS-1 and 2 satellite radar altimeter data of Antarctica, show significant seasonal, inter-annual, and long-term changes. Elevation time-series are created from altimeter crossovers among 90-day data periods on a 50 km grid to 81.5 degrees S and fit with a multivariate linear/sinusoidal function to give the average rate of elevation change (dH/dt) and account for seasonal changes. On the major Ronne, Filchner, and Ronne ice shelves, the dH/dt are small or near zero. In contrast, the ice shelves of the Antarctic Peninsula and along the West Antarctic coast appear to be thinning significantly, with a 23 +/- 3 cm a(exp -1) surface elevation decrease on the Larsen ice shelf and a 65 +/- 4 cm a(exp -1) decrease on the Dotson ice shelf. Significant elevation decreases are obtained over most of the drainage basins of the Pine Island and Thwaites glaciers. Significant increases are obtained over most of the other grounded ice in Marie Byrd Land, the Antarctic Peninsula, and Coates Land. Over the sector from 85 degrees W to 115 degrees W, which includes the Pine Island and Thwaites basins, the average elevation is significantly decreasing by 8.1 cm a(exp -1). The corresponding ice thickness change is about -11 cm a(exp -1), with a corresponding mass loss of 82 Gt a(exp -1), and a 0.22 mm a(exp -1) contribution to global sea level rise. In terms of elevation change, the decrease in the Pine Island-Thwaites sector is largely balanced by the increase in the Marie Byrd Land, but only balanced by about 1/4 in terms of ice thickness change and contribution to sea level rise. The overall average elevation change for the grounded ice is + 1.2 cm a(exp -1). Using an average bedrock uplift of 2.5 cm a(exp -1), implies an average ice thickness decrease of 1.3 cm a(exp -1), a mass loss of 22 Gt a(exp -1), and a 0.06 mm a(exp -1) contribution to global sea level rise.

Zwally, H. Jay↗
NASA NTRS1984

Growth and lignification in seedlings exposed to eight days of microgravity

Four-day-old pine seedlings and mung bean and oat seeds were prepared for flight on the third Space Transport System Mission (STS-3). The seedlings and seeds were planted in six mini-growth chambers (two chambers per species) which were placed in a plant growth unit (PGU). Another set of seedlings and seeds was prepared and placed in another PGU as the 1 g control. The flight PGU was positioned in the orbiter mid-deck locker area about 11 h prior to launch. The pine seedlings and germinating mung bean and oat seeds were exposed to 194 h of microgravity. The PGU was received at a temporary laboratory about 75 min post-landing. Plants were observed, photographed and the atmospheric gases analyzed at the landing site. The plants were then brought to our Houston laboratory where they were measured and analyzed for lignin and protein content and for phenylalanine ammonia-lyase (PAL) and peroxidase activities. Flight seedlings were shorter than the controls in all three species. Twenty-five to 40 per cent of the mung bean and oat roots were growing upward, and the mung beans showed signs of disorientation. Flight mung beans showed a significant reduction in lignin content in comparison to the controls, and PAL and peroxidase activities were reduced in flight pine seedlings. The results generally support the postulate that lignin synthesis is reduced in near-weightlessness and show other interesting findings.

Flight Experiment↗
NASA NTRS2011

The Potential Impact of CO2 and Air Temperature Increases on Krummholz's Transformation into Arborescent Form in the Southern Siberian Mountains

Trees in the southern Siberian Mountains forest-tundra ecotone have considerably increased their radial and apical growth increments during the last few decades. This leads to the widespread vertical transformation of mat and prostrate krummholz forms of larch (Larix sibirica Ledeb) and Siberian pine (Pinus sibirica Du Tour). An analysis of the radial growth increments showed that these transformations began in the mid-1980s. Larch showed a greater resistance to the harsh alpine environment and attained a vertical growth form in areas where Siberian pine is still krummholz. Upper larch treeline is about 10 m higher than Siberian pine treeline. Observed apical and radial growth increment increases were correlated with CO2 concentration (r = 0.83-0.87), summer temperatures (r = 0.55-0.64), and "cold period" (i.e. September-May) air temperatures (r = 0.36-0.37). Positive correlation between growth increments and winter precipitation was attributed to snow cover protection for trees during wintertime.

Kharuk, V. I.↗
DOE OSTI2023

Advanced Analytical Methodologies Enable Feedstock Screening and Correlation to Pyrolysis Yields and Catalytic Upgrading

Pyrolysis of lignocellulosic biomass can serve as a powerful pathway for the generation of renewable fuels and industrial products. However, procurement of some biomass may be costly, especially when there is competition for alternative uses. Forestry and agricultural byproducts may serve as valuable pyrolysis feedstocks due to their high availability and low cost. Although waste products may fill demand for affordable pyrolysis feedstocks, they are often high in ash and extractives which contribute to unfavorable changes in pyrolysis vapor composition, as well as end products. The work presented here investigates the correlations between various pine anatomical fractions to understand their effect on pyrolysis oil composition for forest residues. Analytical pyrolysis coupled to direct analysis by molecular beam mass spectrometry (MBMS) provides real-time monitoring of pyrolysis vapor composition, even for compounds that are not amenable to gas chromatography. Statistical analysis of MBMS data from the fast pyrolysis (FP) of clean pine, cambium, twigs and branches, needles, bark, and a forest residue samples revealed that bark and needles made the greatest differences in the vapor composition of forest residues during pyrolysis and were enriched in resin acids, furfural derivatives, and ions that have been previously observed from catalysis corresponding to ash content. These results were also compared to catalytic fast pyrolysis (CFP) using a platinum on titania catalyst, and correlations between FP and CFP products were observed for the anatomical fractions. The forest residues and corresponding anatomical fractions from a stand of 23-year-old pine will be converted by fast pyrolysis in a bench-scale 2-inch fluidized-bed reactor, and statistical correlations between the bench-scale products and analytical-scale pyrolysis vapors will be shown. This work highlights the power of advanced analytical methodologies in determining the contributions of vapor components to catalytic pyrolysis outcomes for mixed feedstocks and demonstrates the use of analytical methodologies to better screen feedstocks prior to pyrolysis.

analytical↗
DOE OSTI2015

Laurentian Bioenergy Project

Work performed under this contract involves development of forest management guidelines related to removal of forest harvest residues from forested sites and brushlands in Minnesota, assessments of biomass availability from forests and brushlands and logistics and equipment associated with handling woody biomass with emphasis on evaluation of a trailer-mounted bundling system. Also, work on hybrid poplar breeding, field testing and yield analysis is included. Evaluation of the production of aspen and red pine along with opportunities to procure woody biomass through thinning operations in red pine is described. Finally, an assessment of issues related to increasing biomass usage at the Laurentian Energy Authority generation facilities is discussed.

09 BIOMASS FUELS↗
NASA NTRS2021

Dendroarchaeological Analysis of the Terminal Warehouse in New York City Reveals A History of Long-Distance Timber Transport During the Gilded Age

The Gilded Age of the late 19th century marked a period of rapid development and urbanization in New York City, U.S. To accommodate the high demand in wood products during that time, the timbers used for development of the city were increasingly sourced from locations distant from the northeastern United States. The Terminal Warehouse in the Chelsea neighborhood of New York City was one of many large buildings erected during this period of city expansion, and is an important symbol of New York City commerce during the late 1800s. To determine the history and provenance of timbers used in the construction of the Terminal Warehouse, we used tree-ring analysis on longleaf pine (Pinus palustris Mill.) joists that were original to the building. The ring-width patterns on the joists cross dated well internally, suggesting a common origin of the sampled lumber. Further, our Terminal Warehouse tree-ring chronology (1512–1891 C.E.) correlated strongly with existing tree-ring chronologies from western/central Georgia and eastern Alabama, indicating that the timbers were extracted from this region of the southeastern United States. The provenancing and dating of the Terminal Warehouse timbers underscores the important role that southern pines played in the expansion and development of New York City during the Gilded Age.

Dendroprovenance↗
DOE OSTI2017

Incorporating variability in simulations of seasonally forced phenology using integral projection models

Phenology models are becoming increasingly important tools to accurately predict how climate change will impact the life histories of organisms. We propose a class of integral projection phenology models derived from stochastic individual-based models of insect development and demography. Our derivation, which is based on the rate-summation concept, produces integral projection models that capture the effect of phenotypic rate variability on insect phenology, but which are typically more computationally frugal than equivalent individual-based phenology models. We demonstrate our approach using a temperature-dependent model of the demography of the mountain pine beetle (Dendroctonus ponderosae Hopkins), an insect that kills mature pine trees. This work illustrates how a wide range of stochastic phenology models can be reformulated as integral projection models. Due to their computational efficiency, these integral projection models are suitable for deployment in large-scale simulations, such as studies of altered pest distributions under climate change.

Goodsman, Devin W.↗
DOE OSTI2021

Pyrolysis temperature and soil depth interactions determine PyC turnover and induced soil organic carbon priming

Pyrogenic organic carbon (PyC) is a complex, heterogeneous class of thermally altered organic substrates, but its dynamics and how its behavior changes with soil depth remain poorly understood. We conducted a laboratory incubation study to investigate the interactive effects of pyrolysis temperature and soil depth on the turnover of PyC compared to its precursor wood and native SOC (NSOC). We incubated dual-labeled (13C and 15N) jack pine pyrogenic organic matter produced at 300 °C (PyC300), 450 °C (PyC450), and their precursor pine wood in a fine-loamy, mixed-conifer forest soil for 745 days. A mixture of surface (0–10 cm) and subsurface (50–70 cm) forest soils, with and without labeled biomass were incubated in the dark at 55% soil water field capacity and 25 °C. Total 13C from PyC and wood mineralized as 13C-CO2 (as % of C added to soil) declined with an increase in pyrolysis temperature as follows: 54 ± 7.7% for wood, 3.1 ± 0.2% for PyC300, and 0.94 ± 0.08% for PyC450. Furthermore, after 2 years, soil depth interacted with pyrolysis temperature to affect C turnover, with total wood C losses significantly declining from 70.6% in surface soils to 37.5% in subsurface soil, while total losses of PyC300 and PyC450 were unaffected by differences between surface and subsurface soils. Wood induced negative priming (i.e., decreased mineralization rates) in surface soil at days 3 and 60, while PyC300 induced positive priming (i.e., increased mineralization rates) in subsurface soil at day 60. After 2 years, unlabeled NSOC losses increased from 9.2 ± 0.8% of NSOC in unamended treatments to 16.5 ± = 2.6% of NSOC with PyC450 additions. Our results suggest that PyC pyrolyzed at a given temperature can mineralize at similar rates between soil depths, and high amounts of PyC450 in subsurface soils can stimulate NSOC losses. These findings indicate that soil depth imposes critical controls on PyC dynamics belowground.

13C-labeling↗
DOE OSTI2019

Synthesis of Carboxyl-Rich Biosorbent by UV-Induced Graft Polymerization Method for High Efficiency Adsorption of Ce{sup 3+} from Aqueous Solution: Activation and Adsorption Mechanism

Developing a cost-effective and highly efficient sorbent for the recovery of rare-earth elements from aqueous solution is still an urgent need. In this study, a novel biosorbent, carboxyl-rich pine bark (CPB), was modified by UV-induced graft polymerization method to increase the carboxyl-containing functional groups and facilitate the adsorption of Ce{sup 3+}. The grafting process was examined by Fourier transform infrared (FTIR) spectroscopy and field emission scanning electron microscopy (FESEM), indicating that high-density carboxyl functional groups are present on the surface of pine bark and the grafting yield of surface polymer brushes reaches up to 128%. Interestingly, the maximum adsorption capacity of Ce{sup 3+} on CPB could reach up to 256.5 mg/g. The adsorption mechanism of Ce{sup 3+} by CPB has been determined by the adsorption models and x-ray photoelectron spectroscopy (XPS), which can be inferred from these results that the high performance of CPB is attributed to the surface coordination between Ce{sup 3+} and hydroxyl or carbonyl groups. This work suggests that engineered surface functional groups of biomass could have an opportunity for the development of high performance rare-earth element adsorbents.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

Effect of autohydrolysis pretreatment on biomass structure and the resulting bio-oil from a pyrolysis process

Pyrolysis is a promising method for converting biomass to biofuels. However, some of pyrolysis oil's physiochemical properties still limit its commercial applications. Here, the autohydrolysis pretreatment at 175 ± 3 °C for 40 min was conducted to improve the resulting pine pyrolysis oil’s properties as a fuel. During autohydrolysis, deacetylation and decomposition of hemicellulose was observed by ion-exchange chromatography and Fourier transform infrared spectroscopy (FT-IR). Additionally, the cleavage of lignin ether bonds was clearly determined by 13 C cross-polarization/magic angle spinning (CP/MAS) nuclear magnetic resonance (NMR). Phosphitylation followed by 31 P NMR analysis of the heavy oils gave detailed structural information of the hydroxyl groups; the results revealed that autohydrolysis pretreatment led to a reduction of carboxyl acids in the heavy oils generated at all three pyrolysis temperatures (400, 500, and 600 °C). The 31 P NMR analysis also revealed that autohydrolysis pretreatment led to a reduction of condensed phenolic hydroxyl groups in the heavy oils produced at 600 °C. 1 H- 13 C heteronuclear single-quantum correlation (HSQC) NMR analysis showed that at a pyrolysis temperature of 600 °C, the pretreated pine produced lower methoxy group constituents. In both 31 P and HSQC NMR results indicated that autohydrolysis pretreatment increased levoglucosan yields in the bio-oils.

09 BIOMASS FUELS↗
DOE OSTI2021

X-ray computed tomography-based porosity analysis: Algorithms and application for porous woody biomass

The properties of lignocellulosic biomass, such as bulk physical, thermal, and mechanical properties, as well as the mobility of enzymes or catalysts, are largely affected by porosity, pore structures, and pore size distribution. While X-ray computed tomography (CT) has been introduced to effectively produce 3D volumetric images of material microstructure, a quantitative porosity analysis from the 3D images has never been done. This work introduces a first-of-its-kind X-ray CT-based quantitative porosity analysis method and applies the developed toolkit to characterize the internal porosity distribution of loblolly pine. A sample loblolly pine chip was scanned by a nano-resolution X-ray CT system and digitally reconstructed after a sequence of image processing operations. Here, a comprehensive porosity analysis was then performed to quantify the envelope porosity, the spatial distribution of local porosity, and the directional porosity. Solutions to the various challenges in image processing, porosity calculation, and large data handling are provided.

42 ENGINEERING↗
DOE OSTI2015

Experimental drought and heat can delay phenological development and reduce foliar and shoot growth in semiarid trees

Higher temperatures associated with climate change are anticipated to trigger an earlier start to the growing season, which could increase the terrestrial C sink strength. Greater variability in the amount and timing of precipitation is also expected with higher temperatures, bringing increased drought stress to many ecosystems. We experimentally assessed the effects of higher temperature and drought on the foliar phenology and shoot growth of mature trees of two semiarid conifer species. We exposed field-grown trees to a ~45% reduction in precipitation with a rain-out structure (‘drought’), a ~4.8 °C temperature increase with open-top chambers (‘heat’), and a combination of both simultaneously (‘drought + heat’). Over the 2013 growing season, drought, heat, and drought + heat treatments reduced shoot and needle growth in piñon pine ( Pinus edulis ) by ≥39%, while juniper ( Juniperus monosperma ) had low growth and little response to these treatments. Needle emergence on primary axis branches of piñon pine was delayed in heat, drought, and drought + heat treatments by 19–57 days, while secondary axis branches were less likely to produce needles in the heat treatment, and produced no needles at all in the drought + heat treatment. Growth of shoots and needles, and the timing of needle emergence correlated inversely with xylem water tension and positively with nonstructural carbohydrate concentrations. Our findings demonstrate the potential for delayed phenological development and reduced growth with higher temperatures and drought in tree species that are vulnerable to drought and reveal potential mechanistic links to physiological stress responses. Furthermore, climate change projections of an earlier and longer growing season with higher temperatures, and consequent increases in terrestrial C sink strength, may be incorrect for regions where plants will face increased drought stress with climate change.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2014

Forest response and recovery following disturbance in upland forests of the Atlantic Coastal Plain

Carbon and water cycling of forests contribute significantly to the Earth’s overall biogeochemical cycling and may be affected by disturbance and climate change. As a larger body of research becomes available about leaf-level, ecosystem and regional scale effects of disturbances on forest ecosystems, a more mechanistic understanding is developing which can improve modeling efforts. Here, we summarize some of the major effects of physical and biogenic disturbances, such as drought, prescribed fire, and insect defoliation, on leaf and ecosystem-scale physiological responses as well as impacts on carbon and water cycling in an Atlantic Coastal Plain upland oak/pine and upland pine forest. During drought, stomatal conductance and canopy stomatal conductance were reduced, however, defoliation increased conductance on both leaf-level and canopy scale. Furthermore, after prescribed fire, leaf-level stomatal conductance was unchanged for pines but decreased for oaks, while canopy stomatal conductance decreased temporarily, but then rebounded the following growing season, thus exhibiting transient responses. This study suggests that forest response to disturbance varies from the leaf to ecosystem level as well as species level and thus, these differential respon

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Failure Modes and Effects Analysis of Biorefinery Pathways

This talk provides an overview of failure modes and effects analysis (FMEA) development and implementation as a systematic criticality and risk assessment tool for biorefinery pathways within the FCIC. This supports a quality by design (QbD) approach, and this talk provides a high-level overview of the results for the FMEA evaluation focused on the generation of pine residue materials for high-temperature pyrolysis conversion. the FMEA interviews included two approaches. The first approach was based around the entire system of unit operations giving a wholistic system level view. The second approach used detailed interviews from individual unit operation within the system allowing for specific failures for individual system components. These two approaches provide different resolutions of information about the reliability and risk. The FMEA results focused on failures associated with meeting critical quality attributes (CQAs) identified for the high temperature conversion of loblolly pine residues and were supplemented with experimental data supporting process upsets and reliability also collected within the consortium. Estimations of risk scores for meeting each given CQA specification, identification of the impacts for not meeting a CQA specification, capturing causes associated with material attributes and process parameters for each failure, identification of current detection methods, and speculation of potential mitigation strategies for decreasing a failure’s risk score were gathered through the FMEA interviews, and were combined to understand the overall process risk metrics and where technology, process, and knowledge improvements are needed in order to de-risk emerging biorefineries.

09 BIOMASS FUELS↗