Search NASA⌕ Search

SEARCH · Search NASA

Results for “quantum capacitance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

522 records · Page 29

Plasma cell adaptation to enhance particle acceleration

A plasma study is performed in order to construct a cell for plasma acceleration purpose. As well, a multicell design is introduced for the injection of beam driver application. The suggested idea is experimentally demonstrated for two plasma cell configuration. The preformed plasma is obtained by a symmetrically driven capacitive audio frequency discharge. It is featured by its moderate pressure of 0.1-0.2 Torr, low consumption power of 130 W maximum, low discharge voltage and frequency up to 950 V and 20 kHz, respectively, and high plasma density from 10{sup 11} to 10{sup 15} cm{sup -3}. The electron temperature obtained by Langmuir double probe varies from 1 up to 16 eV. It is observed that the increases of the discharge voltage and frequency enlarge the plasma parameters to their maximum values. The plasma cell filled with different gases demonstrates that the Ar and He gases manifest the highest ionization efficiency exceeding 100% at 950 V and 20 kHz. The formed plasma is cold; its density is uniform and stable along the positive column for long competitive lifetime. Showing that it follows the conditions to enhance particle acceleration and in conjunction with its periphery devices form a plasma cell that could be extended to serve this purpose. Demonstrating that an injected electron beam into the extended preformed plasma could follow, to long distance, a continuous trajectory of uniform density. Such plasma generated by H{sub 2} or Ar gases is suggested to be used, respectively, for low-density or higher density beam driver.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Voltage linearity modulation and polarity dependent conduction in metal-insulator-metal capacitors with atomic-layer-deposited Al{sub 2}O{sub 3}/ZrO{sub 2}/SiO{sub 2} nano-stacks

Excellent voltage linearity of metal-insulator-metal (MIM) capacitors is highly required for next generation radio frequency integration circuits. In this work, employing atomic layer deposition technique, we demonstrated how the voltage linearity of MIM capacitors was modulated by adding different thickness of SiO{sub 2} layer to the nano-stack of Al{sub 2}O{sub 3}/ZrO{sub 2}. It was found that the quadratic voltage coefficient of capacitance (α) can be effectively reduced from 1279 to −75 ppm/V{sup 2} with increasing the thickness of SiO{sub 2} from zero to 4 nm, which is more powerful than increasing the thickness of ZrO{sub 2} in the Al{sub 2}O{sub 3}/ZrO{sub 2} stack. This is attributed to counteraction between the positive α for Al{sub 2}O{sub 3}/ZrO{sub 2} and the negative one for SiO{sub 2} in the MIM capacitors with Al{sub 2}O{sub 3}/ZrO{sub 2}/SiO{sub 2} stacks. Interestingly, voltage-polarity dependent conduction behaviors in the MIM capacitors were observed. For electron bottom-injection, the addition of SiO{sub 2} obviously suppressed the leakage current; however, it abnormally increased the leakage current for electron top-injection. These are ascribed to the co-existence of shallow and deep traps in ZrO{sub 2}, and the former is in favor of the field-assisted tunnelling conduction and the latter contributes to the trap-assisted tunnelling process. The above findings will be beneficial to device design and process optimization for high performance MIM capacitors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Cold atmospheric pressure plasma jets as sources of singlet delta oxygen for biomedical applications

Absolute densities of singlet delta oxygen (SDO) molecules were measured using infrared optical emission spectroscopy in the flowing effluents of two different atmospheric-pressure plasma jets (APPJs): a capacitively coupled radio-frequency-driven jet (rf-APPJ) and a lower frequency kilohertz-driven dielectric barrier discharge jet. The plasma jets were operated in helium, with small admixtures of molecular oxygen (O{sub 2} < 2%). High absolute SDO densities of up to 6.2 x 10{sup 15} cm{sup -3} were measured at approximately 10 cm downstream. The rf-APPJ seems to be much more efficient in producing SDO. The influence of different parameters, such as gas flows and mixtures and power coupled to the plasmas, on the production of SDO by the two APPJs has been investigated. Despite the considerable differences between the two plasma jets (excitation frequency, electric field direction, inter-electrode distance, plasma propagation), similar dependencies on the oxygen admixture and on the dissipated power were found in both APPJs. However, opposite trends were observed for the gas flow dependence. The results presented in this paper show that the control of the external operating conditions of each APPJ enables the tailoring of the SDO composition of both plasma effluents. This provides scope to tune the plasma jets for desired applications, e.g., in biomedicine.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Argon metastable and resonant level densities in Ar and Ar/Cl 2 discharges used for the processing of bulk niobium

In this work, a comparative analysis of two popular spectroscopy techniques is conducted in a coaxial cylindrical capacitively coupled discharge designed for the plasma processing of superconducting radio frequency (SRF) cavities. The density of the metastable and resonant levels in Ar is measured in both Ar and Ar/Cl 2 discharges to properly characterize the unique discharge system and aid in the development of a cavity etching routine. The first method, deemed the “branching fraction method,” utilizes the sensitivity of photon reabsorption of radiative decay to measure the lower state (metastable and resonant) densities by taking ratios of spectral lines with a common upper level. This method has been gaining popularity as it does not require any a priori knowledge about the electron energy distribution. The second method is a tunable diode laser absorption spectroscopy technique that measures the thermal Doppler broadening of spectral lines, from which the neutral gas temperature and lower state density of the transition can be evaluated. The two methods were conducted in tandem, while external parameters that were empirically determined to be important to the etching mechanism of SRF cavities are varied. Relationships between the excited state densities and the external parameters are presented for both spectroscopy methods and conclusions about the effects of these parameters on the discharge are stated when appropriate.

Plasma properties and parameters↗

Three-dimensional model of magnetized capacitively coupled plasmas

A three-dimensional plasma model is used to understand the characteristics of magnetized capacitively coupled plasma discharges. The simulations consider plasmas generated using high frequency (13.5 MHz) and very high frequency (162 MHz) sources, electropositive (Ar) and electronegative (O{sub 2}) gases, and spatially uniform and nonuniform magnetic fields. Application of a magnetic field parallel to the electrodes is found to enhance the plasma density due to improved electron confinement and shift the plasma due to the ExB drift. The plasma is electrically symmetric at 162 MHz so it drifts in opposite directions adjacent to the two electrodes due to the ExB drift. On the other hand, the 13.5 MHz plasma is electrically asymmetric and it predominantly moves in one direction under the influence of the ExB drift. The ExB drift focuses the plasma into a smaller volume in regions with convex magnetic field lines. Conversely, the ExB drift spreads out the plasma in regions with concave magnetic field lines. In a magnetized O{sub 2} plasma, the overall plasma is found to move in one direction due to the ExB drift while the plasma interior moves in the opposite direction. This behavior is linked to the propensity of negative ions to reside in regions of peak plasma potential, which moves closer to the chamber center opposite to the ExB drift direction.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Control of plasma uniformity in a capacitive discharge using two very high frequency power sources

Very high frequency (VHF) capacitively coupled plasma (CCP) discharges are being employed for dielectric etching due to VHF's various benefits including low plasma potential, high electron density, and controllable dissociation. If the plasma is generated using multiple VHF sources, one can expect that the interaction between the sources can be important in determining the plasma characteristics. The effects of VHF mixing on plasma characteristics, especially its spatial profile, are investigated using both computational modeling and diagnostic experiments. The two-dimensional plasma model includes the full set of Maxwell equations in their potential formulation. The plasma simulation results show that electron density peaks at the center of the chamber at 180 MHz due to the standing electromagnetic wave. Electrostatic effects at the electrode edges tend to get stronger at lower VHFs such as 60 MHz. When the two rf sources are used simultaneously and power at 60 MHz is gradually increased, the ion flux becomes uniform and then transitions to peak at electrode edge. These results are corroborated by Langmuir probe measurements of ion saturation current. VHF mixing is therefore an effective method for dynamically controlling plasma uniformity. The plasma is stronger and more confined when the 60 MHz source is connected to the smaller bottom electrode compared to the top electrode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetic field-assisted synthesis of wire-like Co{sub 3}O{sub 4} nanostructures: Electrochemical and photocatalytic studies

Graphical abstract: Schematic illustration for the magnetic field-assisted growth of wire-like Co{sub 3}O{sub 4} nanostructure. Display Omitted Highlights: ► Co{sub 3}O{sub 4} nanowires are prepared by magnetic field hydrothermal reduction and annealing. ► These Co{sub 3}O{sub 4} nanowires possess enhanced capacitance. ► The Co{sub 3}O{sub 4} nanowires have a good photocatalytic activity for methyl orange. -- Abstract: Wire-like Co{sub 3}O{sub 4} nanostructures were prepared by the combination of magnetic field-assisted hydrothermal reduction of cobalt ions and the subsequent ambient annealing at 500 °C. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to characterize the structure and morphological evolution of the products. The results show that the wire-like nanostructures possess diameters about 250 nm and lengths over 10 μm. The possible formation mechanism of the wire-like Co{sub 3}O{sub 4} nanostructures is also proposed based on the SEM results. Galvanostatic methods were used to characterize the electrochemical properties. The measurements indicate that the wire-like Co{sub 3}O{sub 4} nanostructures show larger discharge and charge capacities than that of spherical Co{sub 3}O{sub 4} nanoparticles prepared in the absence of magnetic field. In addition, the photocatalytic activity of the products was investigated by measuring the photodegradation of methyl orange solution under ultraviolet radiation, which shows that both the wire-like and spherical products have a good photocatalytic activity.

36 MATERIALS SCIENCE↗

Numerical simulations of electrical asymmetry effect on electronegative plasmas in capacitively coupled rf discharge

Recently a so-called electrical asymmetry effect (EAE), which could achieve high-degree separate control of ion flux and energy in dual-frequency capacitively coupled radio-frequency (CCRF) discharges, was discovered theoretically by Heil et al. [J. Phys. D: Appl. Phys. 41, 165202 (2008)] and was confirmed by experiments and theory/numerical simulations later on for electropositive argon discharges. In this work simulations based on particle-in-cell/Monte Carlo collision are performed to study the EAE on electronegative oxygen plasmas in geometrically symmetric CCRF discharges. Dual frequency discharges operating at 13.56 and 27.12 MHz are simulated for different pressures and the results are compared with those of electropositive argon discharges at the same conditions. It is found that in general the EAE on oxygen discharges has similar behavior as on argon discharge: The self-bias voltage {eta} increases monotonically and almost linearly with the increase in the phase angle {theta} between the two driving voltages in the range 0<{theta}<90 deg. , and the maximum ion energy varies by a factor of 3 by adjusting {theta}. However, the ion flux varies with {theta} by {+-}12% for low pressure and by {+-}15% for higher pressure, due primarily to an enhanced plasma series resonance, which then leads to dramatic changes in plasma density, power absorption and consequently the electronegativity. This may place a limitation for achieving separate control of ion energy and flux for electronegative plasma via the EAE.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental study of spatial nonuniformities in 100 MHz capacitively coupled plasma using optical probe

Plasma spatial nonuniformities in the 100 MHz rf driven capacitively coupled reactor used for reactive ion etching of 300 mm substrates were experimentally studied using a linear scanning optical emission spectroscopy probe. Radial profiles of plasma emission intensity were measured both in argon and fluorocarbon-containing gas mixtures in the pressure interval of 10-80 mTorr and the rf power range of 500-1250 W. It was demonstrated that the plasma emission profiles strongly depend on the working gas composition and pressure. The profiles have a bell-like shape at pressures about 10 mTorr for all gases. As the pressure increases, the profile shape becomes more complex with the central and peripheral peaks, and the amplitudes of the peaks strongly depend on the working gas composition. It is suggested that the emission profiles show plasma spatial nonuniformities that can influence the etching rate profiles obtained with such systems. According to the existing theoretical models, the most probable reasons for these plasma nonuniformities are charged particle radial diffusion at low pressures (about 10 mTorr), as well as the standing wave and skin and edge effects at higher pressures. Using the experimental emission profiles, the working conditions have been found that allow one to achieve the most uniform plasma for discharges in argon and fluorocarbon-containing gas mixtures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nanometer-Scale Imaging of Inhomogeneous Active Charge Carriers in Arsenic-Doped CdTe Thin Films

We report nanometer-scale imaging of active carrier distribution of As-doped CdTe films by scanning capacitance microscopy (SCM). We developed SCM sample preparation for CdTe by ion-milling followed by thermal processing. The nanometer-resolution carrier delineation for CdTe was validated by imaging on a CdTe cross-section sample made by a molecular beam epitaxy layer stack with As-doping concentrations of 10^15 ~10^18 /cm 3 . We found that the carrier distribution in As-doped films was significantly nonuniform, with inhomogeneity ranging from sub-um to a few um and concentration variation of one order of magnitude (low 10^16 to low 10^17 /cm 3 ). This nonuniformity is distributed randomly, independent of grain structure and grain boundary (GB). We used Kelvin probe force microscopy (KPFM) and cathodoluminescence (CL) to further map the surface potential and radiative illumination on the same area as the SCM image. Higher potential and lower CL intensity were found on GBs but not on SCM contrast, illustrating positive GB charging and GB recombination but not GB-distinguished doping. The overall KPFM potential image is in rough agreement with the SCM carrier distribution, in terms of Fermi-level position relative to the bandgap edge - thus resulting in the band-edge potential fluctuation. Nonuniform carrier concentration, potential fluctuation, and defect recombination can all together cause the Voc deficit of the As-doped CdTe device.

14 SOLAR ENERGY↗

Scaling of silicon nanoparticle growth in low temperature flowing plasmas

Low temperature plasmas are an emerging method to synthesize high quality nanoparticles (NPs). An established and successful technique to produce NPs is using a capacitively coupled plasma (CCP) in cylindrical geometry. Although a robust synthesis technique, optimizing or specifying NP properties using CCPs, is challenging. In this paper, results from a computational investigation for the growth of silicon NPs in flowing inductively coupled plasmas (ICPs) using Ar/SiH 4 gas mixtures of up to a few Torr are discussed. ICPs produce more locally constrained and quiescent plasma potentials. These positive plasma potentials produce an electrostatic trap for negatively charged NPs, which can significantly extend the residence time of NPs in the plasma, which in turn provides a controllable period for particle growth. The computational platforms used in this study consist of a two-dimensional plasma hydrodynamics model, a three-dimensional nanoparticle growth and trajectory tracking model, and a molecular dynamics simulation for deriving reactive sticking coefficients of silane radicals on Si NPs. Trends for the nanoparticle growth as a function of SiH 4 inlet fraction, gas residence time, energy deposition per particle, pressure, and reactor diameter are discussed. The general path for particle synthesis is the trapping of small NPs in the positive electrostatic potential, followed by entrainment in the gas flow upon reaching a critical particle size. Optimizing or controlling NP synthesis then depends on the spatial distribution of plasma potential, the density of growth species, and the relative time that particles spend in the electrostatic trap and flowing through higher densities of growth species upon leaving the trap.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Comparative analysis of the effects of tantalum doping and annealing on atomic layer deposited (Ta{sub 2}O{sub 5}){sub x}(Al{sub 2}O{sub 3}){sub 1−x} as potential gate dielectrics for GaN/Al{sub x}Ga{sub 1−x}N/GaN high electron mobility transistors

This paper describes a method to optimally combine wide band gap Al{sub 2}O{sub 3} with high dielectric constant (high-κ) Ta{sub 2}O{sub 5} for gate dielectric applications. (Ta{sub 2}O{sub 5}){sub x}(Al{sub 2}O{sub 3}){sub 1−x} thin films deposited by thermal atomic layer deposition (ALD) on GaN-capped Al{sub x}Ga{sub 1−x}N/GaN high electron mobility transistor (HEMT) structures have been studied as a function of the Ta{sub 2}O{sub 5} molar fraction. X-ray photoelectron spectroscopy shows that the bandgap of the oxide films linearly decreases from 6.5 eV for pure Al{sub 2}O{sub 3} to 4.6 eV for pure Ta{sub 2}O{sub 5}. The dielectric constant calculated from capacitance-voltage measurements also increases linearly from 7.8 for Al{sub 2}O{sub 3} up to 25.6 for Ta{sub 2}O{sub 5}. The effect of post-deposition annealing in N{sub 2} at 600 °C on the interfacial properties of undoped Al{sub 2}O{sub 3} and Ta-doped (Ta{sub 2}O{sub 5}){sub 0.12}(Al{sub 2}O{sub 3}){sub 0.88} films grown on GaN-HEMTs has been investigated. These conditions are analogous to the conditions used for source/drain contact formation in gate-first HEMT technology. A reduction of the Ga-O to Ga-N bond ratios at the oxide/HEMT interfaces is observed after annealing, which is attributed to a reduction of interstitial oxygen-related defects. As a result, the conduction band offsets (CBOs) of the Al{sub 2}O{sub 3}/GaN-HEMT and (Ta{sub 2}O{sub 5}){sub 0.16}(Al{sub 2}O{sub 3}){sub 0.84}/GaN-HEMT samples increased by ∼1.1 eV to 2.8 eV and 2.6 eV, respectively, which is advantageous for n-type HEMTs. The results demonstrate that ALD of Ta-doped Al{sub 2}O{sub 3} can be used to control the properties of the gate dielectric, allowing the κ-value to be increased, while still maintaining a sufficient CBO to the GaN-HEMT structure for low leakage currents.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of electrode spacing on the density distributions of electrons, ions, and metastable and radical molecules in SiH{sub 4}/NH{sub 3}/N{sub 2}/He capacitively coupled plasmas

Semiconductor fabrication often requires the deposition of hydrogenated silicon nitride (SiN{sub x}H{sub y}) film using SiH{sub 4}/NH{sub 3}/N{sub 2}/He capacitively coupled plasma (CCP) discharge. As analysis of the discharge geometry is essential to understanding CCP deposition, the effect of electrode spacing on the two-dimensional distributions of electrons, ions, and metastable and radical molecules was analyzed numerically using a fluid model. The simulation shows that the spatial variations in the ionization rates near the sheath become more obvious as the electrode spacing increases. In addition, as molecule-molecule gas-phase reactions are significantly affected by the local residence time, large electrode spacings are associated with significant volumetric losses for positive ions. Consequently, an increase of the electrode spacing leads axial density profiles of ions to change from bell shaped to double humped. However, NH{sub 4}{sup +} persistently maintains a bell-shaped axial density profile regardless of the degree of electrode spacing. We set the mole fraction of NH{sub 3} to only 1% of the total flow at the inlet, but NH{sub 4}{sup +} is the most abundant positive ion at the large electrode spacings. As the gas flow can transport the radicals around the space between the electrodes, we found that radical density distribution shifts toward the grounded electrode. The shift becomes pronounced as the electrode spacing increases. Finally, to validate our model, we compared the calculated deposition rate profile with the experimental data obtained along the wafer radius. According to our numerical results, the SiN{sub x}H{sub y} deposition rate decreases by approximately 16% when the electrode spacing increases from 9 to 20 mm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Implementation of scalable suspended superinductors

Superinductors have become a crucial component in the superconducting circuit toolbox, playing a key role in the development of more robust qubits. Enhancing the performance of these devices can be achieved by suspending the superinductors from the substrate, thereby reducing stray capacitance. Here, we present a fabrication framework for constructing superconducting circuits with suspended superinductors in planar architectures. To validate the effectiveness of this process, we systematically characterize both resonators and qubits with suspended arrays of Josephson junctions, ultimately confirming the high quality of the superinductive elements. In addition, this process is broadly compatible with other types of superinductors and circuit designs. Furthermore, our results not only pave the way for scalable superconducting architectures utilizing superinductors but also provide the primitive for future investigation of loss mechanisms associated with the device substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Deep level transient spectroscopy investigation of ultra-wide bandgap ($\bar201$) and ($001$) β -Ga 2 O 3

Here, this work reports on a comprehensive examination of the electrical and thermal properties of vertical Schottky diodes fabricated on ($\bar201$) and ($001$)-oriented samples of β-Ga 2 O 3 . The temperature-dependent current–voltage (I–V) and capacitance–voltage (C–V) data were gathered and analyzed down to 60 K. Deep level transient spectroscopy (DLTS) was used to study bulk and interface defects in the two materials from approx. 325 K down to 60 K. In the bulk ($\bar201$) material, an electron trap was observed at E C -0.46 eV, with a capture cross section of 1.6 x 10 -14 cm 2 and a lambda-corrected maximum trap density of 9.08 x 10 15 cm -3 . These results and others indicate that the electron trap is a strong candidate for the well-known E1 defect in β-Ga 2 O 3 based on recent investigations. Additionally, in the ($\bar201$) material, the smooth modulation typical of interface states is evident at temperatures below 275 K. The ($001$) samples manifested what is likely the E2* electron trap at E C -0.68 eV, with a capture cross section of 1.64 x 10 -15 cm 2 and a lambda-corrected maximum trap density of 8.85 x 10 15 cm -3 . The presence of the E2* defect, in particular, is a contrast to the findings of recent DLTS investigations on β-Ga 2 O 3 , which report that E2* emerged only after low-energy proton irradiation. These results help to further map out the defect signatures found in β-Ga 2 O 3 materials, which are of vital importance in the design and fabrication of future β-Ga 2 O 3 devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Experimental investigations of electron heating dynamics and ion energy distributions in capacitive discharges driven by customized voltage waveforms

Capacitively coupled radio frequency plasmas driven by customized voltage waveforms provide enhanced opportunities to control process-relevant energy distributions of different particle species. Here, we present an experimental investigation of the spatio-temporal electron heating dynamics probed by Phase-Resolved Optical Emission Spectroscopy (PROES) in an argon discharge driven by up to three consecutive harmonics of 13.56 MHz with individually adjustable harmonics' amplitudes and phases. PROES and voltage measurements are performed at fixed total voltage amplitudes as a function of the number of driving harmonics, their relative phases, and pressure to study the effects of changing the applied voltage waveform on the heating dynamics in collisionless and collisional regimes. Additionally, the ion energy distribution function (IEDF) is measured at low pressure. In this collisionless regime, the discharge is operated in the α-mode. The velocity of energetic electron beams generated by the expanding sheaths is found to be affected by the number of driving harmonics and their relative phases. This is understood based on the sheath dynamics obtained from a model that determines sheath voltage waveforms. The formation of the measured IEDFs is understood and found to be directly affected by the observed changes in the electron heating dynamics. It is demonstrated that the mean ion energy can be controlled by adjusting the harmonics' phases. In the collisional regime at higher pressures changing the number of harmonics and their phases at fixed voltage is found to induce heating mode transitions from the α- to the γ-mode. Finally, a method to use PROES as a non-invasive diagnostic to monitor and detect changes of the ion flux to the electrodes is developed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A cryogenic slab CO laser

A compact capacitive transverse RF-discharge-pumped slab CO laser with cryogenically cooled electrodes, which operates both in the cw and repetitively pulsed regimes, is fabricated. The laser operation is studied in the free running multifrequency regime at the vibrational - rotational transitions of the fundamental (V + 1 {yields} V) vibrational bands of the CO molecule in the spectral region from 5.1 to 5.4 {mu}m. Optimal operation conditions (gas mixture composition and pressure, RF pump parameters) are determined. It is shown that only gas mixtures with a high content of oxygen (up to 20% with respect to the concentration of CO molecules) can be used as an active medium of this laser. It is demonstrated that repetitively pulsed pumping is more efficient compared to cw pumping. In this case, quasi-cw lasing regime can be obtained. The maximum average output power of {approx}12 W was obtained for this laser operating on fundamental bands and its efficiency achieved {approx}14 %. The frequency-selective operation regime of the slab RF-discharge-pumped CO laser was realised at {approx} 100 laser lines in the spectral region from 5.0 to 6.5 {mu}m with the average output power of up to several tens of milliwatts in each line. Lasing at the transitions of the first vibrational overtone (V + 2 {yields} V) of the CO molecule is obtained in the spectral region from 2.5 to 3.9 {mu}m. The average output power of the overtone laser achieved 0.3 W. All the results were obtained without the forced gas mixture exchange in the discharge chamber. Under fixed experimental conditions, repetitively pulsed lasing (with fluctuations of the output characteristics no more than {+-}10 %) was stable for more than an hour. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Self-consistent electrodynamics of large-area high-frequency capacitive plasma discharge

Capacitively coupled plasmas (CCPs) generated using high frequency (3-30 MHz) and very high frequency (30-300 MHz) radio-frequency (rf) sources are used for many plasma processing applications including thin film etching and deposition. When chamber dimensions become commensurate with the effective rf wavelength in the plasma, electromagnetic wave effects impose a significant influence on plasma behavior. Because the effective rf wavelength in plasma depends upon both rf and plasma process conditions (e.g., rf power and gas pressure), a self-consistent model including both the rf power delivery system and the plasma discharge is highly desirable to capture a more complete physical picture of the plasma behavior. A three-dimensional model for self-consistently studying both electrodynamic and plasma dynamic behavior of large-area (Gen 10, >8 m{sup 2}) CCP is described in this paper. This model includes Maxwell's equations and transport equations for charged and neutral species, which are coupled and solved in the time domain. The complete rf plasma discharge chamber including the rf power delivery subsystem, rf feed, electrodes, and the plasma domain is modeled as an integrated system. Based on this full-wave solution model, important limitations for processing uniformity imposed by electromagnetic wave propagation effects in a large-area CCP (3.05x2.85 m{sup 2} electrode size) are studied. The behavior of H{sub 2} plasmas in such a reactor is examined from 13.56 to 200 MHz. It is shown that various rectangular harmonics of electromagnetic fields can be excited in a large-area rectangular reactor as the rf or power is increased. The rectangular harmonics can create not only center-high plasma distribution but also high plasma density at the corners and along the edges of the reactor.

36 MATERIALS SCIENCE↗