Search NASA⌕ Search

SEARCH · Search NASA

Results for “scanning electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Liquid phase preparation and fluorescence of flake-liked NdF{sub 3} nanomaterials

Graphical abstract: Room-temperature emission spectra of NdF{sub 3} nanoflakes exhibit a strong luminescence emission peak at 402 nm when irradiated by an excitation wavelength of 250 nm. Display Omitted Highlights: ► NdF{sub 3} nanoflakes have been successfully prepared by a facile and repeatable liquid phase preparation. ► The action of oxalic acid in the reaction process was studied, showing important in the morphology of neodymium fluorides. ► The study on the fluorescent properties of flake-like NdF{sub 3} nanomaterials shows a strong emission peak at 402 nm by the excitation wavelength of 250 nm. -- Abstract: Neodymium fluoride nanoflakes were successfully prepared by a facile liquid phase preparation with Nd(NO{sub 3}){sub 3} and NaF as raw materials. In the process, oxalic acid acting as template agent was found to play important roles in the morphology of neodymium fluorides. The as-synthesized NdF{sub 3} nanoflakes were characterized by various techniques of X-ray diffraction (XRD), scanning electron microscope (SEM) and energy dispersive X-ray spectrometer instrument (EDS). The fluorescent properties of neodymium fluoride nanoflakes were investigated, showing a strong luminescence emission peak at 402 nm by the excitation wavelength of 250 nm.

36 MATERIALS SCIENCE↗

Effects of zinc salts on the structural and optical properties of acidic chemical bath deposited ZnS thin films

Graphical abstract: XRD patterns of annealed ZnS films from different zinc salts. Curves a, b, c, d correspond to the annealed ZnS–C1, ZnS–S{sub 3}, ZnS–Cl{sub 2}, ZnS–N{sub 2} thin films. Display Omitted Highlights: ► ZnS thin films were deposited using different zinc salts. ► The grain sizes of deposited ZnS thin films are about 12.5 15.5 nm. ► The band gaps of deposited ZnS thin films were in the range of 3.66–3.83 eV. -- Abstract: ZnS thin films were deposited from different zinc salts by chemical bath deposition (CBD). Structural, morphological and optical characterizations were performed using different methods such as X-ray diffraction (XRD), scanning electron microscopy (SEM) and Raman spectra. The particle sizes of as-deposited ZnS thin films were calculated to be about 12.5–15.5 nm and the crystal qualities were improved after annealed at 500 °C in Ar/H{sub 2}S (5%) atmosphere. Optical absorption measurements indicated that the band gaps of ZnS thin films were in the range of 3.66–3.83 eV and they decreased with the increasing of particle sizes. ZnCl{sub 2} was found to the best precursor due to the higher crystal quality and compact surface of deposited ZnS thin films.

36 MATERIALS SCIENCE↗

Pencil-like zinc oxide micro/nano-scale structures: Hydrothermal synthesis, optical and photocatalytic properties

Graphical abstract: - Highlights: • Zinc oxide micro/nanopencils have been synthesized hydrothermally. • Photocatalytic activity has been evaluated by the degradation of methylene blue under UV light irradiation. • ZnO nanopencils exhibit much higher photocatalytic activity than the commercial ZnO. - Abstract: Zinc oxide micro/nanopencils have been successfully synthesized by hydrothermal process using zinc acetate and diamines as structure-directing agents. The morphology, the structure, the crystallinity and the composition of the materials were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). The optical properties of synthesized ZnO were investigated by UV–vis spectroscopy. The photocatalytic activity of the material has been evaluated by the degradation of methylene blue under UV irradiation. As a result, after the lapse of 150 min, around 82% bleaching was observed, with ZnO nanopencils yielding more photodegradation compared to that of commercial ZnO (61%)

36 MATERIALS SCIENCE↗

A facile method to synthesize carbon coated Li{sub 1.2}Ni{sub 0.2}Mn{sub 0.6}O{sub 2} with improved performance

Graphical abstract: Li{sub 1.2}Ni{sub 0.2}Mn{sub 0.6}O{sub 2} powders are synthesized and then coated by decomposed carbon. The discharge capacity of carbon-coated cathode at 0.1 and 5 C are 246 and 125 mAhg{sup −1}, while those of ball-milled cathode are 222 and 49 mAhg{sup −1}. - Highlights: • A simple method was applied to synthesize carbon-coated Li{sub 1.2}Ni{sub 0.2}Mn{sub 0.6}O{sub 2}. • The discharge capacities of carbon-coated sample at 0.1 and 5.0 C rates are 246 and 125 mAh/g. • Capacity retention of carbon-coated electrode after 50 cycles is 97.5%. - Abstract: Carbon-coated Li{sub 1.2}Ni{sub 0.2}Mn{sub 0.6}O{sub 2} powders have been synthesized with Bakelite and heat process in air. The effect of carbon coating on the physical and electrochemical properties have been discussed through the characterizations of X-ray diffraction (XRD), scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS), discharge and rate tests. The carbon-coated cathode exhibits much improved first discharge capacity and rate capability than the pristine sample. The discharge capacity at 0.1 and 5.0 C rates are 246 and 125 mAhg{sup −1}, while that of pristine are only about 222 and 49 mAhg{sup −1}, respectively. The capacity retention of Li{sub 1.2}Ni{sub 0.2}Mn{sub 0.6}O{sub 2} electrode after 50 cycles is improved from 89.8 to 97.5% after carbon coating. EIS results indicate that R{sub ct} of Li{sub 1.2}Ni{sub 0.2}Mn{sub 0.6}O{sub 2} electrode is decreased from 62 to 37 Ω after carbon coating.

36 MATERIALS SCIENCE↗

Application of glucose as a green capping agent and reductant to fabricate CuI micro/nanostructures

Graphical abstract: - Highlights: • CuI nanostructures were prepared via a simple precipitation method. • Glucose as a green capping agent and reductant was applied. • The effect of glucose concentration on the morphology of CuI was investigated. • According to XRD results, pure cubic phase CuI have been formed by using glucose. - Abstract: In this work, CuI micro/nanostructures have been successfully prepared via a simple precipitation route at room temperature. By using glucose as a clean reducing agent with different concentrations, CuI micro/nanostructures with various morphologies were obtained. Besides glucose, Na{sub 2}SO{sub 3}, KBH{sub 4} and N{sub 2}H{sub 4}·H{sub 2}O have been applied as reductant. X-ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence spectroscopy, X-ray energy dispersive spectroscopy (EDS) and Fourier transformed infrared (FT-IR) spectroscopy were used to characterize the as-produced CuI micro/nanostructures. According to the XRD results, it was found that pure cubic phase CuI have been formed by using glucose.

36 MATERIALS SCIENCE↗

A facile route to high-purity BN nanoplates with ultraviolet cathodoluminescence emissions at room temperature

Highlights: • We present a novel and simple approach to great-scale fabrication of BN nanoplates. • The as-synthesized products are extensively characterized. • The formation mechanism of BN nanoplates are elucidated based on experimental observations. • A growth model was proposed according to our experimental observations and analysis. • BN nanoplates’ CL performance envisions its applications such as UV emitters. - Abstract: We present a novel and notably simple approach to fabricate BN nanoplates in large scale employing ammonia borane as a single-source precursor. The structure and chemical composition of the as-synthesized products are extensively characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM) and electron energy-loss spectroscopy (EELS). XRD analysis indicates that the products are hexagonal BN crystal. SEM images confirm that the BN nanoplates have an average diameter of about 200 nm and thickness of tens of nanometers. HRTEM results illustrate the BN nanoplates to be single-crystals. EELS result suggests the nanoplates are composed of boron and nitride elements. The formation mechanism of the BN nanoplates has been elucidated based on our experimental observations, and a growth model has been proposed accordingly. Cathodoluminescence spectroscopic analysis is performed and strong ultraviolet (UV) emissions are detected. Our method provides a simple route towards the large-scale fabrication of high-quality BN nanoplates, for which various promising applications such as compact UV emitters can be envisioned.

36 MATERIALS SCIENCE↗

Shape evolution of Eu-doped Bi{sub 2}WO{sub 6} and their photocatalytic properties

Highlights: • Hydrothermal synthesis of Eu-doped Bi{sub 2}WO{sub 6} micro/nanostructure without any additives. • Dopant and doping level affect the shape evolution and photocatalytic activities. • Eu-doped Bi{sub 2}WO{sub 6} exhibit superior photocatalytic activity in degradation of RhB. - Abstract: Europium-doped bismuth tungstate (Eu-doped Bi{sub 2}WO{sub 6}) was synthesized via hydrothermal method. The composition, structure, and microstructure of the products were characterized by X-ray diffraction and scanning electron microscopy. Depending on the doping level, nanoflakes and 3D hierarchical microspheres were formed. The photocatalytic activities of all products obtained were evaluated by the degradation of Rhodamine-B under visible light irradiation. A substantially improved photocatalytic performance of Eu-doped Bi{sub 2}WO{sub 6} is achieved. This study demonstrates a simple method that could produce stable photocatalysts with greatly enhanced performance.

36 MATERIALS SCIENCE↗

Structural, optical and ethanol gas sensing properties of In{sub 2}O{sub 3} and Dy{sup 3+}:In{sub 2}O{sub 3} nanoparticles

This paper reports the structural, optical and ethanol gas sensing properties of In{sub 2}O{sub 3} and 5% Dy{sup 3+}doped In{sub 2}O{sub 3} nanoparticles. The simple cost-effective hydrolysis assisted co-precipitation method was adopted. Synthesized samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and UV-visible spectroscopy (UV-vis) techniques. XRD revealed that synthesized nanoparticles have cubic bixbyite phase. The lattice parameter, strain and crystallite size have been calculated by using the Williamson-Hall plots. UV-vis spectroscopy showed the red shift in the optical band gap due to Dy{sup 3+} doping in In{sub 2}O{sub 3} nanoparticles. For ethanol gas sensing properties, the nanoparticles were applied as thick film onto alumina substrate and tested at different operating temperatures. The results showed that the optimum operating temperature of both the gas sensors is 300°C. At optimum operating temperature, the response of In{sub 2}O{sub 3} and Dy{sup 3+}:In{sub 2}O{sub 3} gas sensor towards 250 ppm ethanol was found to be 9.65 and 37.80. The investigations revealed that the addition of Dy{sup 3+} as a dopant enhanced the sensing response of In{sub 2}O{sub 3} nanoparticles appreciably.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Niobium boride layers deposition on the surface AISI D2 steel by a duplex treatment

In this paper, we investigated the possibility of deposition of niobium boride layers on the surface of AISI D2 steel by a duplex treatment. At the first step of duplex treatment, boronizing was performed on AISI D2 steel samples at 1000{sup o}C for 2h and then pre-boronized samples niobized at 850°C, 900°C and 950°C using thermo-reactive deposition method for 1–4 h. The presence of the niobium boride layers such as NbB, NbB{sub 2} and Nb{sub 3}B{sub 4} and also iron boride phases such as FeB, Fe{sub 2}B were examined by X-ray diffraction analysis. Scanning electron microscope (SEM) and micro-hardness measurements were realized. Experimental studies showed that the depth of the coating layers increased with increasing temperature and times and also ranged from 0.42 µm to 2.43 µm, depending on treatment time and temperature. The hardness of the niobium boride layer was 2620±180 HV{sub 0.005}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhanced Pr{sup 3+} photoluminescence by energy transfer in SrF{sub 2} : Eu{sup 2+}, Pr{sup 3+} phosphor

Efficient energy transfer was demonstrated in the SrF{sub 2} : Eu{sup 2+}, Pr{sup 3+} phosphor synthesized by the co-precipitation method. Results obtained with X-ray diffraction (XRD), scanning electron microscopy (SEM), x-ray spectroscopy (XPS), photoluminescence (PL) and decay curves proposed the UV-Vis energy transfer process. The energy transfer process between the Eu{sup 2+} and Pr{sup 3+} ions in SrF{sub 2} was investigated to evaluate the potential of the Eu{sup 2+} ion as a sensitizer for the Pr{sup 3+} ion. The results proposed that Eu{sup 2+} could be a good sensitizer for absorbing the UV photons and efficiently enhancing the Pr{sup 3+} emission intensity. The energy transfer process was effective until concentration quenching for the Pr{sup 3+} ions occurred. The concentration quenching was attributed to cross-relaxation between the Pr{sup 3+} ions.

36 MATERIALS SCIENCE↗

Optical, structural and morphological properties of zirconia nanoparticles prepared by laser ablation in liquids

Absorption, fluorescence and Raman spectra, the structural composition and morphology of zirconia nanoparticles synthesised via the laser ablation of a metal in water and aqueous solutions of the sodium dodecyl sulphate (SDS) surfactant have been studied using absorption spectroscopy, Raman spectroscopy, X-ray diffraction and scanning electron microscopy. The results demonstrate that, exposing zirconium to intense nanosecond laser pulses at a high repetition rate in these liquids, one can obtain stable cubic, tetragonal and monoclinic crystalline phases of nanozirconia with a particle size in the range 40 – 100 nm and a Zr – SDS organic – inorganic composite. The absorption and fluorescence of the synthesised zirconia strongly depend on the SDS concentration in the starting solution. The gas – vapour bubbles forming during ablation are shown to serve as templates for the formation of hollow nanoand microstructures. (nanostructures)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation of Cu{sub 2}O and ZnO Crystal Layers by Magnetron Assisted Sputtering and Their Optical Characterization

Copper (I) oxide and zinc oxide films are formed on silicon and glassy quartz substrates by magnetron assisted sputtering. The thickness of the films is tens and hundreds of nanometers. The films are grown at different substrate temperatures and different oxygen pressures in the working chamber. The film samples are studied by the X-ray diffraction technique, scanning electron microscopy, and optical methods. It is established that an increase in the substrate temperature yields a change in the surface morphology of copper (I) oxide films towards the formation of well-pronounced crystallites. The reflectance and Raman spectra suggest that the quality of such films is close to that of bulk Cu{sub 2}O crystals produced by the oxidation of copper. As concerns ZnO films, an increase in the substrate temperature and an increase in the partial oxygen pressure make it possible to produce films, for which a sharp exciton structure is observed in the reflectance spectra and the emission of excitons bound at donors is observed in the luminescence spectra.

36 MATERIALS SCIENCE↗

Electronic structure and magnetic properties of LiMn{sub 1.5}M{sub 0.5}O{sub 4} (M=Al, Mg, Ni, Fe) and LiMn{sub 2}O{sub 4}/TiO{sub 2} nanocrystalline electrode materials

The process of sol–gel synthesis was applied to obtain LiMn{sub 1.5}M{sub 0.5}O{sub 4} (M=Al, Mg, Ni, Fe) and LiMn{sub 2}O{sub 4}/TiO{sub 2} nanopowders. The samples were characterized by following methods: X-ray diffraction (XRD), scanning electron microscopy (SEM/EDX), X-ray photoelectron spectroscopy (XPS) and SQUID magnetometry. XPS was used to examine the chemical composition and oxidation state of manganese, in particular the Mn{sup 3+}/Mn{sup 4+} ratio from the deconvolution of the complex Mn3p lines. The size of the grains and crystallites were independently obtained from SEM images and XRD patterns, respectively. In all the cases a critical interplay of electronic (Mn{sup 3+}/Mn{sup 4+} ratio), structural (unit cell volume) and magnetic properties was observed depending on the synthesis process. - Graphical abstract: SEM image of Li{sub 0.79}Ni{sub 0.41}Mn{sub 1.35}O{sub 4.45} sample. Display Omitted - Highlights: • LiMn{sub 1.5}M{sub 0.5}O{sub 4} (M=Al, Mg, Ni, Fe) and LiMn{sub 2}O{sub 4}/TiO{sub 2} obtained by sol–gel method. • XRD method was used to determine the crystal structure. • SEM/EDX imaging have been done. • XPS electronic structure was examined and discussed. • Experimental effective magnetic moment and the calculated one were compared.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparative dielectric studies of nanostructured BaTiO{sub 3}, CaCu{sub 3}Ti{sub 4}O{sub 12} and 0.5BaTiO{sub 3}⋅ 0.5CaCu{sub 3}Ti{sub 4}O{sub 12} nano-composites synthesized by modified sol–gel and solid state methods

BaTiO{sub 3} (BTO), CaCu{sub 3}Ti{sub 4}O{sub 12} (CCTO) and 0.5BaTiO{sub 3}·0.5CaCu{sub 3}Ti{sub 4}O{sub 12} (BTO–CCTO), as a new nano-composite ceramic, were successfully designed and fabricated by a semi-wet gel route and a modified solid state method. The dielectric properties of the BTO–CCTO ceramic were compared to those of the BTO and CCTO ceramics at lower sintering temperatures and durations. The X-ray diffraction analysis revealed that the BTO and CCTO ceramics form a single crystalline phase and the average crystalline sizes calculated from X-ray diffraction data were in the range of 40–65 nm. The particle sizes of the BTO, CCTO, and BTO–CCTO ceramics obtained from transmission electron microscopy images were in the ranges of 40–65 nm, 80–110 nm, and 70–95 nm, respectively. The phase composition and microstructure were studied by X-ray diffraction and scanning electron microscopy. The energy dispersive X-ray results demonstrated the purity and stoichiometry of the BTO–CCTO nano-composite. The grain sizes of the BTO, CCTO and BTO–CCTO ceramics were found to be in the ranges of 500 nm–1 μm, 4–24 μm, and 250 nm–4 μm, respectively. The AC conductivity as a function of frequency confirmed the semiconducting nature of all of the ceramics and obeyed the Jonscher's power law. The impedance spectrum measurement result showed that the CCTO ceramic possessed an exceptional grain boundary resistance, which supports the internal barrier layer capacitance (IBLC) mechanism present in this ceramic and is responsible for the high ε{sub r} values. - Highlights: • Nanostructured BaTiO{sub 3}, CaCu{sub 3}Ti{sub 4}O{sub 12}, and 0.5BaTiO{sub 3}⋅ 0.5CaCu{sub 3}Ti{sub 4}O{sub 12} have been synthesized. • XRD and TEM analysis confirmed the formation of nanoparticles, 40–65 and 50–90 nm. • Impedance analysis shows high grain-boundary resistance present in CCTO ceramic. • AC conductivity as a function of frequency confirms the semiconducting nature.

36 MATERIALS SCIENCE↗

Activators generated by electron transfer for atom transfer radical polymerization of styrene in the presence of mesoporous silica nanoparticles

Graphical abstract: Effect of mesoporous silica nanoparticles (MCM-41) on the activator generated by electron transfer for atom transfer radical polymerization (AGET ATRP) is investigated. Decrement of conversion and number average molecular weight and also increment of polydispersity index (PDI) values are three main results of addition of MCM-41 nanoparticles. Incorporation of MCM-41 nanoparticles in the polystyrene matrix can clearly increase thermal stability and decrease glass transition temperature of the nanocomposites. - Highlights: • Spherical morphology, hexagonal structure, and high surface area with regular pore diameters of the synthesized MCM-41 nanoparticles are examined. • AGET ATRP of styrene in the presence of MCM-41 nanoparticles is performed. • Effect of MCM-41 nanoparticles addition on the polymerization rate, conversion and molecular weights of the products are discussed. • Improvement in thermal stability of the nanocomposites and decreasing T{sub g} values was also observed by incorporation of MCM-41 nanoparticles. - Abstract: Activator generated by electron transfer for atom transfer radical polymerization was employed to synthesize well-defined mesoporous silica nanoparticles/polystyrene composites. Inherent features of spherical mesoporous silica nanoparticles were evaluated by nitrogen adsorption/desorption isotherm, X-ray diffraction and scanning electron microscopy analysis techniques. Conversion and molecular weight evaluations were carried out using gas and size exclusion chromatography respectively. By the addition of only 3 wt% mesoporous silica nanoparticles, conversion decreases from 81 to 58%. Similarly, number average molecular weight decreases from 17,116 to 12,798 g mol{sup −1}. However, polydispersity index (PDI) values increases from 1.24 to 1.58. A peak around 4.1–4.2 ppm at proton nuclear magnetic resonance spectroscopy results clearly confirms the living nature of the polymerization. Thermogravimetric analysis shows that thermal stability of the nanocomposites increases by adding nanoparticles content. Decrease of glass transition temperature is also demonstrated by the addition of 3 wt% of silica nanoparticles according to the differential scanning calorimetry results.

36 MATERIALS SCIENCE↗

Scanning electron microscopy, X-ray diffraction and thermal analysis study of the TiH{sub 2} foaming agent

The decomposition of commercially available TiH{sub 2} was investigated while performing different thermal treatments. TiH{sub 2} powder, which is widely used as a foaming agent, was heat treated at 450 Degree-Sign C for various times, from 15 min to 120 min. Scanning electron microscopy (SEM) images of the surfaces at different magnifications were obtained and interpreted. A Bragg-Brentano X-ray diffractometer was used to measure the X-ray diffraction (XRD) spectra on all five samples. A close examination of the diffraction spectra showed that for an as-received sample and samples undergoing the longest thermal treatment (1 and 2 h) these spectra can be explained as deriving from cubic TiH{sub 1.924}, while for the other two samples they can be explained as deriving from tetragonal TiH{sub 1.924}. A constant-unit-cell-volume phase transition between the cubic and tetragonal phases in TiH{sub 2-y}-type compounds had been described in the literature. The unit-cell parameters obtained from measured spectra confirm that within the measurement uncertainty the unit-cell volume is indeed constant in all five samples. Thermo-gravimetry (TG) and differential thermal analysis (DTA) measurements were performed on all the samples, showing that the intensity of the dehydrogenation depends on the previous treatment of the TiH{sub 2}. After the thermal analysis XRD of the samples was performed again and the material was found to exhibit a Ti-like unit cell, but slightly enlarged due to the unreleased hydrogen. - Highlights: Black-Right-Pointing-Pointer TiH{sub 2} samples were cubic or tetragonal TiH{sub 1.924} Black-Right-Pointing-Pointer Onset of the hydrogen release temperature increases with the pre-treatment time. Black-Right-Pointing-Pointer Thermal dehydrogenation for the as-prepared TiH{sub 2} is a three-step process. Black-Right-Pointing-Pointer After thermal analysis 2 residual hydrogen TiH{sub x} phases, close to {alpha}Ti, appeared.

36 MATERIALS SCIENCE↗

Corrosion-induced microstructural developments in 316 stainless steel during exposure to molten Li 2 BeF 4 (FLiBe) salt

The microstructural evaluation and characterization of 316 stainless steel samples that were tested in molten Li 2 BeF 4 (FLiBe) salt were investigated in this study for evaluating its performance in high-temperature molten fluoride salts. Recently, 316 stainless steel and FLiBe salt are being actively considered as the main structural alloy and primary coolant of fluoride salt-cooled high-temperature reactor (FHR), a leading nuclear reactor concept for the next generation nuclear plants (NGNP). In support of the materials development for the FHR, high-temperature corrosion tests of 316 stainless steel in molten FLiBe salt at 700°C have been conducted in both bare graphite crucibles and 316 stainless steel-lined crucibles in an inert atmosphere for up to 3000 hours. The microstructure of the tested samples was comprehensively characterized using scanning electron microscopy (SEM) in conjunction with energy dispersive x-ray spectroscopy (EDS) and electron backscatter diffraction (EBSD), and scanning transmission electron microscopy (STEM) with EDS. In addition to the noticeable intergranular corrosion attack on surface, the corrosion in terms of the Cr depletion along high angle grain boundaries (15-180º) extended to 22µm in depth after 3000-hour exposure to molten FLiBe salt in graphite crucible. The coherent Σ3 grain boundary appeared high resistance to the Cr depletion. The substantial Cr depletion from the near-to-surface layer induced phase transformation from γ-martensite to α-ferrite phase (FeNi x ) during corrosion at 700ºC. Furthermore, the presence of graphite in the molten salt doubled the corrosion attack depth and led to the formation of round Mo2C, hexagonal Cr 7 C 3 and needle-like Al 4 C 3 phase within the alloy as deep as 50 µm after 3000-hour corrosion testing. Based on the microstructural analysis, the corrosion mechanisms of 316 stainless steel in molten FLiBe salt in different corrosion crucibles were illuminated through schematic diagrams. Additionally, a thermal diffusion controlled corrosion model was developed and validated by experimental data for predicting the long-term corrosion attack depth.

36 MATERIALS SCIENCE↗

Gallium Oxide Nanostructures for High Temperature Sensors

Gallium oxide (Ga 2 O 3 ) thin films were produced by sputter deposition by varying the substrate temperature (T s ) in a wide range (T s =25-800 °C). The structural characteristics and electronic properties of Ga 2 O 3 films were evaluated using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDS), Rutherford backscattering spectrometry (RBS) and spectrophotometric measurements. The effect of growth temperature is significant on the chemistry, crystal structure and morphology of Ga 2 O 3 films. XRD and SEM analyses indicate that the Ga 2 O 3 films grown at lower temperatures were amorphous while those grown at T s ≥500 oC were nanocrystalline. RBS measurements indicate the well-maintained stoichiometry of Ga 2 O 3 films at T s =300-800 °C. The electronic structure determination indicated that the nanocrystalline Ga 2 O 3 films exhibit a band gap of ~5 eV. Tungsten (W) incorporated Ga 2 O 3 films were produced by co-sputter deposition. W-concentration was varied by the applied sputtering-power. No secondary phase formation was observed in W-incorporated Ga 2 O 3 films. W-induced effects were significant on the structure and electronic properties of Ga2O3 films. The band gap of Ga 2 O 3 films without W-incorporation was ~5 eV. Oxygen sensor characteristics evaluated using optical and electrical methods indicate a faster response in W-doped Ga 2 O 3 films compared to intrinsic Ga 2 O 3 films. The results demonstrate the applicability of both intrinsic and W-doped Ga-oxide films for oxygen sensor application at temperatures ≥700 °C.

47 OTHER INSTRUMENTATION↗