Results for “selective separators” — Page 29

DOE OSTI2025

Enhanced Feedstock Characterization and Modeling to Facilitate Optimal Preprocessing and Deconstruction of Corn Stover (Final Report)

This project addresses the challenge of processing corn stover by fractionating this biomass feedstock to both streamline processing and generate new potential co-products. Additionally, the project developed new field-deployable analytical tools that can be coupled with empirical models that were used to predict feedstock properties and processing performance. The overall scope of this project was: (1) identify conditions for optimal corn stover fractionation using a two- stage physical fractionation, (2) assess how physical fractionation impacts properties, partitioning of biomass, and response to processing, (3) further adapt, develop, and validate several advanced characterization tools for assessing biomass properties that can be linked to processing behavior, and (4) develop and validate predictive models based on measurements that can be performed “in the field” or “at the biorefinery gate” to predict feedstock processing behavior (preprocessing and deconstruction). The first objective employed pre-separation processing (size reduction) which was next subjected to enhanced separations to yield fractions enriched or depleted in select compositional components or properties. For the second objective, fractions were screened for their response to post-separation processing (pretreatment and enzymatic hydrolysis). Detailed characterization profiles were developed and dynamic image analysis to assess distribution of particle size and morphology. For the final objective, we utilized these tools to develop empirical models to assess the relative abundance of tissue type in order to assess fractionation efficacy and to predict fraction performance during pretreatment and enzymatic hydrolysis.

09 BIOMASS FUELS↗

NASA NTRS2003

The Filtered Abel Transform and Its Application in Combustion Diagnostics

Many non-intrusive combustion diagnosis methods generate line-of-sight projections of a flame field. To reconstruct the spatial field of the measured properties, these projections need to be deconvoluted. When the spatial field is axisymmetric, commonly used deconvolution method include the Abel transforms, the onion peeling method and the two-dimensional Fourier transform method and its derivatives such as the filtered back projection methods. This paper proposes a new approach for performing the Abel transform method is developed, which possesses the exactness of the Abel transform and the flexibility of incorporating various filters in the reconstruction process. The Abel transform is an exact method and the simplest among these commonly used methods. It is evinced in this paper that all the exact reconstruction methods for axisymmetric distributions must be equivalent to the Abel transform because of its uniqueness and exactness. Detailed proof is presented to show that the two dimensional Fourier methods when applied to axisymmetric cases is identical to the Abel transform. Discrepancies among various reconstruction method stem from the different approximations made to perform numerical calculations. An equation relating the spectrum of a set of projection date to that of the corresponding spatial distribution is obtained, which shows that the spectrum of the projection is equal to the Abel transform of the spectrum of the corresponding spatial distribution. From the equation, if either the projection or the distribution is bandwidth limited, the other is also bandwidth limited, and both have the same bandwidth. If the two are not bandwidth limited, the Abel transform has a bias against low wave number components in most practical cases. This explains why the Abel transform and all exact deconvolution methods are sensitive to high wave number noises. The filtered Abel transform is based on the fact that the Abel transform of filtered projection data is equal to an integral transform of the original projection data with the kernel function being the Abel transform of the filtering function. The kernel function is independent of the projection data and can be obtained separately when the filtering function is selected. Users can select the best filtering function for a particular set of experimental data. When the kernal function is obtained, it can be used repeatedly to a number of projection data sets (rovs) from the same experiment. When an entire flame image that contains a large number of projection lines needs to be processed, the new approach significantly reduces computational effort in comparison with the conventional approach in which each projection data set is deconvoluted separately. Computer codes have been developed to perform the filter Abel transform for an entire flame field. Measured soot volume fraction data of a jet diffusion flame are processed as an example.

Simons, Stephen N.↗

NASA NTRS1999

Backus Effect on a Perpendicular Errors in Harmonic Models of Real vs. Synthetic Data

Measurements of geomagnetic scalar intensity on a thin spherical shell alone are not enough to separate internal from external source fields; moreover, such scalar data are not enough for accurate modeling of the vector field from internal sources because of unmodeled fields and small data errors. Spherical harmonic models of the geomagnetic potential fitted to scalar data alone therefore suffer from well-understood Backus effect and perpendicular errors. Curiously, errors in some models of simulated 'data' are very much less than those in models of real data. We analyze select Magsat vector and scalar measurements separately to illustrate Backus effect and perpendicular errors in models of real scalar data. By using a model to synthesize 'data' at the observation points, and by adding various types of 'noise', we illustrate such errors in models of synthetic 'data'. Perpendicular errors prove quite sensitive to the maximum degree in the spherical harmonic expansion of the potential field model fitted to the scalar data. Small errors in models of synthetic 'data' are found to be an artifact of matched truncation levels. For example, consider scalar synthetic 'data' computed from a degree 14 model. A degree 14 model fitted to such synthetic 'data' yields negligible error, but amplifies 4 nT (rmss) added noise into a 60 nT error (rmss); however, a degree 12 model fitted to the noisy 'data' suffers a 492 nT error (rmms through degree 12). Geomagnetic measurements remain unaware of model truncation, so the small errors indicated by some simulations cannot be realized in practice. Errors in models fitted to scalar data alone approach 1000 nT (rmss) and several thousand nT (maximum).

Voorhies, C. V.↗

DOE OSTI2020

Gas-Phase Complexes of Americium and Lanthanides with a Bis-triazinyl Pyridine: Reactivity and Bonding of Archetypes for F-Element Separations

Bis-triazinyl pyridines (BTPs) exhibit solution selectivity for trivalent americium over lanthanides (Ln), the origins of which remain uncertain. Here in this paper, electrospray ionization was used to generate gas-phase complexes [ML 3 ] 3+ , where M = La, Lu, or Am and L is EtBTP 2,6-bis(5,6-diethyl-1,2,4-triazin-3-yl)-pyridine. Collision-induced dissociation (CID) of [ML 3 ] 3+ in the presence of H 2 O yielded a protonated ligand [L(H)] + and hydroxide [ML 2 (OH)] 2+ or hydrate [ML(L–H)(H 2 O)] 2+ , where (L–H) - is a deprotonated ligand. Although solution affinities indicate stronger binding of BTPs toward Am 3+ versus Ln 3+ , the observed CID process is contrastingly more facile for M = Am versus Ln. To understand the disparity, density functional theory was employed to compute potential energy surfaces for two possible CID processes, for M = La and Am. In accordance with the CID results, both the rate determining transition state barrier and the net energy are lower for [AmL 3 ] 3+ versus [LaL 3 ] 3+ and for both product isomers, [ML 2 (OH)] 2+ and [ML(L–H)(H 2 O)] 2+ . More facile removal of a ligand from [AmL 3 ] 3+ by CID does not necessarily contradict stronger Am 3+ –L binding, as inferred from solution behavior. In particular, the formation of new bonds in the products can distort kinetics and thermodynamics expected for simple bond cleavage reactions. In addition to correctly predicting the seemingly anomalous CID behavior, the computational results indicate greater participation of Am 5f versus La 4f orbitals in metal–ligand bonding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1983

Preparation, characterization, physical testing and performance of flurocarbon membranes and separators

The direct fluorination method of converting carefully selected hydrocarbon substrates to fluorinated membranes was successfully applied to produce promising, novel membranes for electrochemical devices. A family of polymer blends was identified which permits wide latitude in the concentration of both crosslinks and carboxyl groups in hydrocarbon membranes. The membranes of paragraph two were successfully fluorinated.

Lagow, R. J.↗

NASA NTRS1982

Preparation, characterization, physical testing and performance of fluorocarbon membranes and separators

The direct fluorination method of converting carefully selected hydrocarbon substrates to fluorinated membranes was successfully applied to produce promising, novel membranes for electrochemical devices. A family of polymer blends was identified which permits wide latitude in the concentration of both crosslinks and carboxyl groups in hydrocarbon membranes. These membranes were successfully fluorinated and are potentially competitive with commercial membranes in performance, and potentially much cheaper in price.

Lagow, R. J.↗

NASA NTRS1988

Time evolution of surface chlorophyll patterns from cross-spectrum analysis of satellite color images

The rate of decorrelation of surface chlorophyll patterns as a function of the time separation between pairs of images was determined from two sequences of CZCS images of the Pacific Ocean area adjacent to Vancouver Island, Canada; cloud-free subareas were selected that were common to several images separated in time by 1-17 days. Image pairs were subjected to two-dimensional autospectrum and cross-spectrum analysis in an array processor, and squared coherence estimates found for several wave bands were plotted against time separation, in analogy with a time-lagged cross correlation function. It was found that, for wavelengths of 50-150 km, significant coherence was lost after 7-10 days, while for wavelengths of 25-50 km, significant coherence was lost after only 5-7 days. In both cases, offshore regions maintained coherence longer than coastal regions.

Denman, Kenneth L.↗

DOE OSTI2020

Cooperative Research and Development Agreement between National Energy Technology Laboratory and Korea Institute of Energy Research (KIER) [Abstract]

KIER and NETL will collaborate to study hydrate-based technologies to enhance desalination, gas separation, and hydrocarbon flow through pipelines and wellbores. With optimized selections of hydrate formers and reactors, gas hydrates can be effective and economic mechanisms of separation for solid-water and gas mixtures, and gas hydrate formation or dissociation can be significantly delayed or expedited with suitably selected additives. Comprehensive laboratory studies, including identifying novel hydrate formers or inhibitors to control temperature and pressure requirements and understanding their working mechanism or developing reactor systems for production of large quantities of hydrates, will be performed at both KIER and NETL either parallelly or serially.

03 NATURAL GAS↗

DOE OSTI2020

Cooperative Research and Development Agreement between National Energy Technology Laboratory and Raytheon Technologies Corporation [Abstract]

KIER and NETL will collaborate to study hydrate-based technologies to enhance desalination, gas separation, and hydrocarbon flow through pipelines and wellbores. With optimized selections of hydrate formers and reactors, gas hydrates can be effective and economic mechanisms of separation for solid-water and gas mixtures, and gas hydrate formation or dissociation can be significantly delayed or expedited with suitably selected additives. Comprehensive laboratory studies, including identifying novel hydrate formers or inhibitors to control temperature and pressure requirements and understanding their working mechanism or developing reactor systems for production of large quantities of hydrates, will be performed at both KIER and NETL either parallelly or serially.

02 PETROLEUM↗

NASA NTRSDate not supplied

Hazards of Lunar Surface Exploration: Determining the Immunogenicity/Allergenicity of Lunar Dust

Although infrequent, there have been Apollo program reports of lunar dust (LD) exposure leading to notable upper respiratory symptoms in select crewmembers. Possible mechanisms include particulate irritation, oxidization and release of noxious gas, or legitimate adaptive immune-mediated response. Although sterile non-protein matter would not be expected to be an allergen, one Apollo flight surgeon reported increasing symptoms upon repeated exposure with associated eosinophilia, indicative of allergy (*Acta Astronautica. 2008 63 (7–10): 980–987). Many ISS crews display a pattern of persistent immune system dysregulation and latent virus reactivation (NPJ Microgravity. 2015 Sep 3; 1:15013; NPJ Microgravity. 2017 Apr 12; 3:11). Some ISS crews manifest atypical respiratory and/or dermatitis symptoms which could have an allergic pathogenesis (J Allergy Clin. Immunol. Pract. 2016 Jul-Aug; 4(4):759-762.e8). It is logical to anticipate crew immune dysregulation would worsen during prolonged deep space missions. Planetary surface hazards will only complicate crew health risks. This study with investigate if LD exposure will elicit an IgE mediated allergic response either to the LD itself or concomitant antigen exposure during spaceflight. Allergic reactivity could adversely increase clinical and operational impacts for long-duration lunar astronauts and affect countermeasure requirements for surface vehicles. Specific aims for this study are to answer two questions: (1) Does in vitro LD exposure result in increased histamine from human peripheral blood basophils? (2) Can LD impact the capacity of CD4+ T helper and/or CD19+ B-cell mediated IgE production? To address these questions, after the proposal and selection by NASA, our laboratory has separately requested and been approved for receipt of actual LD samples from the Apollo 16 mission. These samples will be used during the study to complete the proposed set of in vitro cell culture experiments (short and long term), using human peripheral blood mononuclear cells (PBMC) and basophils from both atopic and non-atopic individuals. Cells will be co-cultured with cellular mitogens, common recall antigens (Der p1), fine ground silica quartz (as a possible allergenic component of LD), or LD, to study whether LD exposure for varying time intervals will alter the generation of selective immune responses associated with clinical allergic reactions. Measured outputs include supernatant-derived IgE, tryptase, histamine, and selected cytokine levels. Cellular activation will be monitored by assessing activation markers via flow cytometry. EM/x-ray analysis will be used to determine cellular interactions with dust particles. A series of validation experiments was initiated in FY22 once the delivery of LD was received. Based on initial experimental findings, we are optimizing the culture conditions, LD concentrations, and refining our other protocol stimuli.

Audrie A. Colorado↗

NASA NTRSDate not supplied

Hazards of Lunar Surface Exploration: Determining the Immunogenicity/Allergenicity of Lunar Dust

Although infrequent, there have been Apollo program reports of lunar dust (LD) exposure leading to notable upper respiratory symptoms in select crewmembers. Possible mechanisms include particulate irritation, oxidization and release of noxious gas, or legitimate adaptive immune-mediated response. Although sterile non-protein matter would not be expected to be an allergen, one Apollo flight surgeon reported increasing symptoms upon repeated exposure with associated eosinophilia, indicative of allergy (*Acta Astronautica. 2008 63 (7–10): 980–987). Many ISS crews display a pattern of persistent immune system dysregulation and latent virus reactivation (NPJ Microgravity. 2015 Sep 3; 1:15013; NPJ Microgravity. 2017 Apr 12; 3:11). Some ISS crews manifest atypical respiratory and/or dermatitis symptoms which could have an allergic pathogenesis (J Allergy Clin. Immunol. Pract. 2016 Jul-Aug; 4(4):759-762.e8). It is logical to anticipate crew immune dysregulation would worsen during prolonged deep space missions. Planetary surface hazards will only complicate crew health risks. This study with investigate if LD exposure will elicit an IgE mediated allergic response either to the LD itself or concomitant antigen exposure during spaceflight. Allergic reactivity could adversely increase clinical and operational impacts for long-duration lunar astronauts and affect countermeasure requirements for surface vehicles. Specific aims for this study are to answer two questions: (1) Does in vitro LD exposure result in increased histamine from human peripheral blood basophils? (2) Can LD impact the capacity of CD4+ T helper and/or CD19+ B-cell mediated IgE production? To address these questions, after the proposal and selection by NASA, our laboratory has separately requested and been approved for receipt of actual LD samples from the Apollo 16 mission. These samples will be used during the study to complete the proposed set of in vitro cell culture experiments (short and long term), using human peripheral blood mononuclear cells (PBMC) and basophils from both atopic and non-atopic individuals. Cells will be co-cultured with cellular mitogens, common recall antigens (Der p1), fine ground silica quartz (as a possible allergenic component of LD), or LD, to study whether LD exposure for varying time intervals will alter the generation of selective immune responses associated with clinical allergic reactions. Measured outputs include supernatant-derived IgE, tryptase, histamine, and selected cytokine levels. Cellular activation will be monitored by assessing activation markers via flow cytometry. EM/x-ray analysis will be used to determine cellular interactions with dust particles. A series of validation experiments was initiated in FY22 once the delivery of LD was received. Based on initial experimental findings, we are optimizing the culture conditions, LD concentrations, and refining our other protocol stimuli.

immunology↗

DOE OSTI2025

A Novel Zwitterionic Chromatography Approach to Separate Lithium from Unconventional Resources

Lithium (Li) is a key element for clean energy technologies, and, accordingly, the global lithium demand has been increasing rapidly. Therefore, to meet the Li demand and maintain supply chain stability, it is critical to develop efficient lithium extraction technologies that allow exploitation of unconventional lithium resources, such as geothermal brines and inland brine streams. However, the recovery of Li from these resources is challenging due to low Li concentration, low ratios of Li/Na, Li/Mg, or Li/Ca, and complex feed compositions. To address this, we introduced a new Direct Lithium Extraction (DLE) process using Zwitterionic Chromatography (ZIC) to separate Li from other salts. Since salts are partitioned on ZIC under water elution, no reagent chemicals are needed, and the Li separation is not limited by the adsorption capacity. We prepared 13 different zwitterionic (ZI) resins to investigate the salt retention on various ZI groups and then screened out promising sorbents for efficient Li separation. It was found that salt retention was synergistically affected by the pore size and ZI configurations. Using carboxybetaine (QAC3CA) sorbents, multicomponent separations showed that Li can be partitioned from divalent salts or Na with selectivities of 1.8 or 1.9, respectively. Although the selectivity is relatively low, in real brine tests, Li was separated from Ca and Mg with 79.2 % yield, showing the potential for a continuous process to achieve high productivity and high yield. Simulation studies suggest the salt elution mechanism is related to the hydration reaction energy and the effective hydrated radius of cations.

critical minerals↗

DOE OSTI2024

Carbon Capture through Membranes - Leveraging Multiphysics Modeling, Dimensional Analysis and Machine Learning to Scale up and Optimize Devices and Processes for Decarbonization

We study the separation performance using membrane modules through dimensional analysis (DA). We formulate the main process equations to identify relevant dimensionless numbers inherent in the physics. In particular, we identify that the critical step in the separation process is mass transfer through the selective layer. Remarkably, the dimensionless feed flow (DFfeed) emerges as a crucial factor in describing this process. Not only does DFfeed directly appear in the governing equations, but it also holds a physical significance associated with the time scales for the mass transfer across the feed side and through the selective layer. Regarding the output performance variables, we consider the recovery, stage cut, productivity and purity. In this context, we profit from experimental data and CFD simulations to evaluate the separation performance of the modules when varying the input flowrate, the scale of the module, and the CO2 permeance. These datasets enable us to establish correlations between performance metrics and the dimensionless feed flow (DFfeed). Using simple power functions of DFfeed, we obtain R2 coefficients exceeding 0.99, indicating the accuracy of the correlations built in the present work. In the future, we wish to use DA to understand key transport mechanisms, predict and control module performance, and challenge the universality of these findings by testing various gas separations across different membrane modules beyond our case study.

Pedrozo, Hector A.↗

DOE OSTI2024

Modeling and Scaling up of Membrane Modules Leveraging Dimensional Analysis

In the current analysis, we study the separation performance using membrane modules through dimensional analysis (DA). We formulate the main process equations to identify relevant dimensionless numbers inherent in the physics. In particular, we identify that the critical step in the separation process is mass transfer through the selective layer. Remarkably, the dimensionless feed flow (DFfeed) emerges as a crucial factor in describing this process. Not only does DFfeed directly appear in the governing equations, but it also holds a physical significance associated with the time scales for the mass transfer across the feed side and through the selective layer. Regarding the output performance variables, we consider the recovery, stage cut, productivity and purity. In this context, we profit from experimental data and CFD simulations to evaluate the separation performance of the modules when varying the input flowrate, the scale of the module, and the CO2 permeance. These datasets enable us to establish correlations between performance metrics and the dimensionless feed flow. Using simple power functions of DFfeed, we obtain R2 coefficients exceeding 0.99, indicating the accuracy of the correlations built in the present work. In the future, we wish to use DA to understand key transport mechanisms, predict and control module performance, and challenge the universality of these findings by testing various gas separations across different membrane modules beyond our case study.

Pedrozo, Hector A.↗

NASA NTRS1978

Orbit IMU alinement interpretation of onboard display data

The space shuttle inertial measurement unit (IMU) alinement algorith was examined to determine the most important alinement starpair selection criterion. Three crew displayed parameters were considered: (1) the results of the separation angle difference (SAD) check for each starpair; (2) the separation angle of each starpair; and (3) the age of each star measurement. It was determined that the SAD for each pair cannot be used to predict the IMu alinement accuracy. If the age of each star measurement is less than approximately 30 minutes, time is a relatively unimportant factor and the most important alinement pair selection criterion is the starpair separation angle. Therefore, when there are three available alinement starpairs and all measurements were taken within the last 30 minutes, the pair with the separation angle closest to 90 degrees should be selected for IMU alinement.

Corson, R.↗

NASA NTRS1991

TADPLOT program, version 2.0: User's guide

The TADPLOT Program, Version 2.0 is described. The TADPLOT program is a software package coordinated by a single, easy-to-use interface, enabling the researcher to access several standard file formats, selectively collect specific subsets of data, and create full-featured publication and viewgraph quality plots. The user-interface was designed to be independent from any file format, yet provide capabilities to accommodate highly specialized data queries. Integrated with an applications software network, data can be assessed, collected, and viewed quickly and easily. Since the commands are data independent, subsequent modifications to the file format will be transparent, while additional file formats can be integrated with minimal impact on the user-interface. The graphical capabilities are independent of the method of data collection; thus, the data specification and subsequent plotting can be modified and upgraded as separate functional components. The graphics kernel selected adheres to the full functional specifications of the CORE standard. Both interface and postprocessing capabilities are fully integrated into TADPLOT.

Hammond, Dana P.↗

NASA NTRS1990

Experimental measurements of internal store separation characteristics at supersonic speeds

This paper presents a summary of the experimental supersonic store separation studies that have been conducted at the NASA Langley Research Center. These studies have included investigations of rectangular box cavity flowfields, store separation tests of missiles from various cavity configurations, and tests of a passive venting system for improving the separation characteristics of stores from shallow cavities. Selected results from these investigations are presented which illustrate the types of cavity flowfields that exist at supersonic speeds and the effect of these flowfields and various cavity configurations on the separation characteristics of stores.

Wilcox, Floyd J., Jr.↗

DOE OSTI2023

Computational Screening of Cationic Zeolites for n -Butane/Methane Separations Using Quantitatively Accurate First-Principles-Derived Force Fields

We developed force fields for linear alkanes in Na and Ca-exchanged zeolites based on periodic first-principles calculations with coupled cluster corrections. These force fields were validated by comparing the simulated adsorption properties with extensive experimental data. As an example of using these force fields, we screened silica and aluminosilicate zeolites for separation of n-butane/methane mixtures in several different separation processes. A key step in this screening was the use of an interpolation method to create accurate zeolite structures that take account of the lattice constant changes for different Si/Al ratios for a given zeolite topology. We focused on zeolite structures that have known synthesis routes, so the materials selected from our calculations can be tested experimentally. Several promising materials that show good separation performance were selected for more detailed simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗