Search NASA⌕ Search

SEARCH · Search NASA

Results for “shock capturing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

A review of reduced Navier-Stokes computations for compressible viscous flows

A reduced form of the Navier-Stokes equations, defined by a single composite of the Euler, boundary layer, and triple deck approximations, is considered for the computation of viscous interacting flows. Global pressure or pseudopotential relaxation methods are integrated with coupled sparse matrix direct solvers or coupled strongly implicit ILU algorithms to efficiently capture sharp shocks and regions of recirculation. Solutions are obtained for a variety of 2D and 3D geometries and for Mach numbers (M) spanning the range from incompressible (M = 0) to supersonic (M = 6) flow.

Rubin, S. G.↗

A test suite for magnetohydrodynamical simulations

A collection is presented of MHD problems that will provide researchers who have interests in modeling MHD phenomena with a battery of tests (a 'test suite') for calibrating their numerical algorithms. Use of these tests will provide a common reference for comparison of different numerical MHD algorithms. The test suite includes both 1D and 2D problems. Taken together, these problems test the abilities of a numerical method to propagate accurately all of the MHD wave families in moving and stationary media, to capture MHD shocks and contact discontinuities, and to model accurately Lorentz force terms in multiple dimensions. An example solution of each test problem is presented. Diagnostic convergence-testing procedures that provide a quantitative evaluation of MHD algorithms are demonstrated.

Stone, James M.↗

A method of predicting quasi-steady aerodynamics for flutter analysis of high speed vehicles using steady CFD calculations

High speed linear aerodynamic theories like piston theory and Newtonian impact theory are relatively inexpensive to use for flutter analysis. These theories have limited areas of applicability depending on the configuration and the flow conditions. In addition, these theories lack the ability to capture viscous, shock and real gas effects. CFD methods can model all of these effects accurately, but the unsteady calculations required for flutter are expensive and often impractical. This paper describes a method for using steady CFD calculations to approximate the generalized aerodynamic forces for a flutter analysis. Example two-and three-dimensional aerodynamic force calculations are provided. In addition, a flutter analysis of a NASP-type wing will be discussed.

Scott, Robert C.↗

A method of predicting quasi-steady aerodynamics for flutter analysis of high speed vehicles using steady CFD calculations

High speed linear aerodynamic theories like piston theory and Newtonian impact theory are relatively inexpensive to use for flutter analysis. These theories have limited areas of applicability depending on the configuration and the flow conditions. In addition, these theories lack the ability to capture viscous, shock, and real gas effects. CFD methods can model all of these effects accurately, but the unsteady calculations required for flutter are expensive and often impractical. This paper describes a method for using steady CFD calculations to approximate the generalized aerodynamic forces for a flutter analysis. Example two-and three-dimensional aerodynamic force calculations are provided. In addition, a flutter analysis of a NASP-type wing will be discussed.

Scott, Robert C.↗

Transonic Flow Computations Using Nonlinear Potential Methods

This presentation describes the state of transonic flow simulation using nonlinear potential methods for external aerodynamic applications. The presentation begins with a review of the various potential equation forms (with emphasis on the full potential equation) and includes a discussion of pertinent mathematical characteristics and all derivation assumptions. Impact of the derivation assumptions on simulation accuracy, especially with respect to shock wave capture, is discussed. Key characteristics of all numerical algorithm types used for solving nonlinear potential equations, including steady, unsteady, space marching, and design methods, are described. Both spatial discretization and iteration scheme characteristics are examined. Numerical results for various aerodynamic applications are included throughout the presentation to highlight key discussion points. The presentation ends with concluding remarks and recommendations for future work. Overall. nonlinear potential solvers are efficient, highly developed and routinely used in the aerodynamic design environment for cruise conditions. Published by Elsevier Science Ltd. All rights reserved.

Holst, Terry L.↗

Computation of Transonic Flows Using Potential Methods

The proposed paper will describe the state of the art associated with numerical solution of the full or exact velocity potential equation for solving transonic, external-aerodynamic flows. The presentation will begin with a review of the literature emphasizing research activities of the past decade. Next, the various forms of the full or exact velocity potential equation, the equation's corresponding mathematical characteristics, and the derivation assumptions will be presented and described in detail. Impact of the derivation assumptions on simulation accuracy, especially with respect to shock wave capture, will be presented and discussed relative to the more complete Euler or Navier-Stokes formulations. The technical presentation will continue with a description of recently developed full potential numerical approach characteristics. This description will include governing equation nondimensionalization, physical-to-computational-domain mapping procedures, a limited description of grid generation requirements, the spatial discretization scheme, numerical implementation of boundary conditions, and the iteration scheme. The next portion of the presentation will present and discuss numerical results for several two- and three-dimensional aerodynamic applications. Included in the results section will be a discussion and demonstration of a typical grid refinement analysis for determining spatial convergence of the numerical solution and level of solution accuracy. Computer timings for a variety of full potential applications will be compared and contrasted with similar results for the Euler equation formulation. Finally. the presentation will end with concluding remarks and recommendations for future work.

Hoist, Terry L.↗

Overview of the Aeroelastic Prediction Workshop

The Aeroelastic Prediction Workshop brought together an international community of computational fluid dynamicists as a step in defining the state of the art in computational aeroelasticity. This workshop's technical focus was prediction of unsteady pressure distributions resulting from forced motion, benchmarking the results first using unforced system data. The most challenging aspects of the physics were identified as capturing oscillatory shock behavior, dynamic shock-induced separated flow and tunnel wall boundary layer influences. The majority of the participants used unsteady Reynolds-averaged Navier Stokes codes. These codes were exercised at transonic Mach numbers for three configurations and comparisons were made with existing experimental data. Substantial variations were observed among the computational solutions as well as differences relative to the experimental data. Contributing issues to these differences include wall effects and wall modeling, non-standardized convergence criteria, inclusion of static aeroelastic deflection, methodology for oscillatory solutions, post-processing methods. Contributing issues pertaining principally to the experimental data sets include the position of the model relative to the tunnel wall, splitter plate size, wind tunnel expansion slot configuration, spacing and location of pressure instrumentation, and data processing methods.

Heeg, Jennifer↗

Planar shock-induced bubble collapse and jetting in water captured via X-ray phase contrast imaging

Shock wave–bubble interactions in water manifest rich dynamics driven by a combination of strong pressure and density mismatches. They have a wide variety of applications, including the injection of pharmaceuticals, and through scaling, enable the exploration of various aspects of high-energy-density systems such as inertial confinement fusion. In this work, the interaction between a micrometric nitrogen bubble and a planar shock wave, characterized by a Mach number of M = 1.24 and a peak pressure of p max = 0.57 , is experimentally recorded using ultra-high-speed x-ray phase contrast imaging. Highly resolved radiographs provide access to all phase discontinuities along the beam path, offering quantities such as the time-varying bubble size, the speed of a jet produced during the bubble collapse, and the time evolution of the shock wave front, which are critical benchmark data for numerical scheme validation. This study addresses the lack of well-characterized, repeatable, and high spatiotemporal resolution experiments at negative Atwood numbers by providing shock–bubble visualization and corresponding numerical simulation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Numerical computation of two dimensional viscous blunt body flows with an impinging shock, part 2

Two-dimensional viscous blunt body flows with an impinging shock have been computed using a time-dependent finite-difference method which solves the complete set of Navier-Stokes equations for a compressible flow. For low Reynolds number flows, the entire flow field, including the bow shock and impinging shock, has been captured in the computation. For higher Reynolds number flows, the bow shock is treated as a discontinuity across which the Rankine-Hugoniot equations are applied, while the boundary layer and interaction regions are captured as before. Using this latter shock-fitting approach, a Type III shock interaction flow field has been computed with flow conditions corresponding to the space shuttle orbiter freestream conditions at 61 km (200,000 ft).

Holst, T. L.↗

Prediction of Undsteady Flows in Turbomachinery Using the Linearized Euler Equations on Deforming Grids

A linearized Euler solver for calculating unsteady flows in turbomachinery blade rows due to both incident gusts and blade motion is presented. The model accounts for blade loading, blade geometry, shock motion, and wake motion. Assuming that the unsteadiness in the flow is small relative to the nonlinear mean solution, the unsteady Euler equations can be linearized about the mean flow. This yields a set of linear variable coefficient equations that describe the small amplitude harmonic motion of the fluid. These linear equations are then discretized on a computational grid and solved using standard numerical techniques. For transonic flows, however, one must use a linear discretization which is a conservative linearization of the non-linear discretized Euler equations to ensure that shock impulse loads are accurately captured. Other important features of this analysis include a continuously deforming grid which eliminates extrapolation errors and hence, increases accuracy, and a new numerically exact, nonreflecting far-field boundary condition treatment based on an eigenanalysis of the discretized equations. Computational results are presented which demonstrate the computational accuracy and efficiency of the method and demonstrate the effectiveness of the deforming grid, far-field nonreflecting boundary conditions, and shock capturing techniques. A comparison of the present unsteady flow predictions to other numerical, semi-analytical, and experimental methods shows excellent agreement. In addition, the linearized Euler method presented requires one or two orders-of-magnitude less computational time than traditional time marching techniques making the present method a viable design tool for aeroelastic analyses.

Clark, William S.↗

Pulsed power driven cylindrical wire array explosions in different media

Cylindrical copper wire array explosions were carried out in de-ionized water, sodium polytungstate solution, nitromethane, and polyester in order to obtain high energy density conditions in the vicinity of implosion using the generated converging shock waves. The utilization of different materials in which the array is immersed can contribute to this goal with higher density resulting in higher shock velocities and possible combustion. The generated shock waves were captured by a framing and a streak camera and shock velocities were calculated and compared. Pressure behind the shock front was calculated using known hydrodynamic relations (for water, polytungstate, and polyester) and compared to two-dimensional hydrodynamic simulations coupled with equations of state (for water and polyester). It was demonstrated that despite lower shock wave velocity in polytungstate solution than water, the pressures generated are similar in both materials. In polyester, both shock velocities and generated pressures are 2-4 times higher than in water. Furthermore, it was shown that it is possible to carry out these explosions in a solid which has several advantages compared to liquids, such as not relying on waterproof systems and easier transportation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A computational study on the interaction between a vortex and a shock wave

A computational study of two-dimensional shock vortex interaction is discussed in this paper. A second order upwind finite volume method is used to solve the Euler equations in conservation form. In this method, the shock wave is captured rather than fitted so that the cases where shock vortex interaction may cause secondary shocks can also be investigated. The effects of vortex strength on the computed flow and acoustic field generated by the interaction are qualitatively evaluated.

Meadows, Kristine R.↗

Extended Lagrangian Born-Oppenheimer molecular dynamics simulations of the shock-induced chemistry of phenylacetylene

The initial chemical events that occur during the shock compression of liquid phenylacetylene have been investigated using self-consistent tight binding molecular dynamics simulations. The extended Lagrangian Born-Oppenheimer molecular dynamics formalism enabled us to compute microcanonical trajectories with precise conservation of the total energy. Our simulations revealed that the first density-increasing step under shock compression arises from the polymerization of phenylacetylene molecules at the acetylene moiety. The application of electronic structure-based molecular dynamics with long-term conservation of the total energy enabled us to identify electronic signatures of reactivity via monitoring changes in the HOMO-LUMO gap, and to capture directly adiabatic shock heating, transient non-equilibrium states, and changes in temperature arising from exothermic chemistry in classical molecular dynamics trajectories.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Soft-sphere simulations of a planar shock interaction with a granular bed

Here we consider the problem of shock propagation through a layer of spherical particles. A point particle force model is used to capture the shock-induced aerodynamic force acting upon the particles. The discrete element method (DEM) code liggghts is used to implement the shock-induced force as well as to capture the collisional forces within the system. A volume-fraction-dependent drag correction is applied using Voronoi tessellation to calculate the volume of fluid around each individual particle. A statistically stationary frame is chosen so that spatial and temporal averaging can be performed to calculate ensemble-averaged macroscopic quantities, such as the granular temperature. A parametric study is carried out by varying the coefficient of restitution for three sets of multiphase shock conditions. A self-similar profile is obtained for the granular temperature that is dependent on the coefficient of restitution. A traveling wave structure is observed in the particle concentration downstream of the shock and this instability arises from the volume-fraction-dependent drag force. The intensity of the traveling wave increases significantly as inelastic collisions are introduced. Downstream of the shock, the variance in Voronoi volume fraction is shown to have a strong dependence upon the coefficient of restitution, indicating clustering of particles induced by collisional dissipation. Statistics of the Voronoi volume are computed upstream and downstream of the shock and compared to theoretical results for randomly distributed hard spheres.

42 ENGINEERING↗

Comparison of coordinate-invariant and coordinate-aligned upwinding for the Euler equations

A floating-shock fitting method for the Euler equations has been developed that uses one-sided spatial differences along and across streamlines. The coordinate-invariant formulation of the spatial differences permits automatic capture of shears. Results are presented for unsteady shocked flow in a duct with a ramp, for supercritical flow over a circular cylinder, and for subsonic, transonic, and supersonic (0.3 is less than or equal to M(sub infinity) is less than 1.5) flow over airfoils. In flows with strong shears, the coordinate-invariant differencing concept appears to yield some gains in accuracy over Euler methods that rely on coordinate-aligned differencing concepts. In applications to transonic airfoils, fitted shocks have a tendency to be predicted upstream of captured shocks, regardless of whether coordinate-invariant or coordinate-aligned differencing is used. The coordinate-invariant differencing method requires between 2 and 3.5 times as much computing time as its coordinate-aligned counterpart.

Hartwich, Peter M.↗

The Impact of Nuclear Physics During Stellar Core Collapse

Nuclear electron capture and the nuclear equation of state play important roles during the collapse of a massive star and the subsequent supernova. The nuclear equation of state controls the nature of the bounce which initially forms the supernova shock while electron capture determines the location where the shock forms. Advances in nuclear structure theory have allowed a more realistic treatment of electron capture on heavy nuclei to be developed. We will review how this improvement has led to a change in our understanding of stellar core collapse, with electron capture on nuclei with masses larger than 50 found to dominate electron capture on free protons, resulting is significant changes in the hydrodynamics of core collapse and bounce. We will also demonstrate the impact of a variety of nuclear equations of state on supernova shock propagation. Of particular note is the interplay between the nuclear composition determined by the equation of state and nuclear electron capture.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Equations of state and shock-driven chemistry in poly(dimethylsiloxane)-based foams

We report that modeling the silicone-based polymer SX358 with two equations of state, one of the unreacted material and another for the decomposition products, captures the experimental shock and thermal data quite well for full density and porous material. By utilizing improved physics models that take into account the macromolecular nature of polymers we are able to capture experimental thermal data. The behavior of SX358 under shock compression is consistent with other polymers in that the threshold for reaction decreases with increasing porosity and chemical decomposition of foams causes a volume expansion, whereas we see a volume collapse in reacted full density SX358.

36 MATERIALS SCIENCE↗

GnarlyX: Eulerian multi-material hydrodynamics coupled to equation of state and hyperelastic, plastic constitutive models

GnarlyX is a new hydrocode for direct numerical simulations of the microstructural behavior of high explosives at the mesoscale. We summarize the computational framework for multidimensional, Eulerian multi-material hydrodynamics coupled to EOS and hyperelastic, plastic constitutive models. We present 1D verification tests of multi-material only and combined multimaterial and strength capabilities with comparisons to exact solutions of shock states resulting from an incident shock impacting the material interface of PBX9502 and aluminum. We show that GnarlyX performs well in capturing the resulting shock waves in examining numerical convergence with exact solutions. In later work, we will summarize the thermomechanics and multi-dimensional, parallel computing capabilities in GnarlyX with multi-dimensional verification tests.

42 ENGINEERING↗