Search NASA⌕ Search

SEARCH · Search NASA

Results for “solidification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Effect of Al-Si Coating on Weld Microstructure and Properties of 22MnB5 Steel Joints for Hot Stamping

22MnB5 hot stamping steels are gradually being used in tailor-welded blank applications. In this experiment, 1-mm-thick Al-Si coated and de-coated 22MnB5 steels were laser-welded and then hot-stamped. The chemical compositions, solidification process, microstructure and mechanical properties were investigated to reveal the effect of Al-Si coating and heat treatment. In the welded condition, the coated joints had an Al content of approximately 2.5 wt.% in the fusion zone and the de-coated joints had 0.5 wt.% Al. The aluminum promoted the δ-ferrite formation as the skeletal structure during solidification. In the high-aluminum weld, the microstructure consisted of martensite and long and band-like δ-ferrite. Meanwhile, the low-aluminum weld was full of lath martensite. After the hot stamping process, the δ-ferrite fraction increased from 10 to 24% in the coated joints and the lath martensite became finer in the de-coated joints. The tensile strengths of the coated joints or de-coated joints were similar to that before hot stamping, but the strength of the coated joints was reduced heavily after hot stamping compared to the de-coated joints and base material. The effect of δ-ferrite on the tensile properties became stronger when the fusion zone was soft and deformed first in the hot-stamped specimens. The coated weld showed a brittle fracture surface with many cleavage planes, and the de-coated weld showed a ductile fracture surface with many dimples in hot-stamped conditions.

36 MATERIALS SCIENCE↗

Grain Refinement by Authigenic Inoculation Inherited from the Medium-Range Order Structure of Ni-Cr-W Superalloy

The combination of liquidus casting and thermal control solidification furnace was applied to obtain a fine-grained ingot. A rapid quenching method and x-ray diffraction measurement were used to investigate the effect of authigenic inoculation on grain refinement. The structure factor S(Q) of liquid Ni-Cr-W superalloy at 1400 °C (Liquidus temperature) and bright-field image of the microstructures quenched from 1400 °C have been measured by the high-temperature x-ray diffractometer and the transmission electron microscopy (TEM), respectively. The results show that a pre-peak exists on a S(Q) curve at the liquidus temperature. The clusters of atom in rapidly quenched microstructures obtained by isothermal heat treatment at 1400 °C were studied using TEM. Meanwhile, the effect of isothermal different temperatures on rapidly quenched microstructures was studied. The results also show that there are only the globular, equiaxed grains distributed in the solidification structure. These particles are inherited from the medium-range order structure, which is beneficial for grain refinement. The normalized work-hardening rate-strain curve indicates the work-hardening rate of fine grain is higher than that of conventional grain at the same temperature and the same deformation.

36 MATERIALS SCIENCE↗

Influence of Thermal History on the Hot Ductility of a Continuously Cast Low Alloyed Cr-Mo Steel

The hot ductility of a low alloyed Cr-Mo steel has been investigated to evaluate the surface cracking sensitivity within the straightening or unbending regime during the continuous casting process. Tensile samples were subjected to various thermal treatments, including melting and solidification, and were tested at deforming temperatures ranging between 600 and 1100 °C using a strain rate of 10{sup −3} s{sup −1}. Hot ductility was evaluated based on reduction in area measurement and metallographic investigations. The investigated steel exhibits a drop in ductility at around 800 °C due to intergranular cracking. Microstructural examinations and supplementary thermokinetic computer simulations were carried out to describe the evolution of the microstructure during solidification and cooling.

36 MATERIALS SCIENCE↗

Microstructural and Mechanical Characterization of Directionally Solidified Conventional and Nb-Modified Mar-M247 Superalloy

This study analyzes the effects of replacing Ta by Nb (at.% basis) in the phase transformation temperatures, Scheil solidification behavior, and microstructural mechanical features of a Nb-modified as well as conventional Mar-M247 superalloys. Both alloys were directionally solidified at a withdrawal rate of 18 cm/h under a thermal gradient of about 80 °C/cm. DSC results were compared to thermodynamic simulations of phase transformation temperatures and showed a good correlation. The replacement of Ta by Nb has not altered the solidification path of Mar-M247, keeping the sequence L → L + γ → L + γ + MC → L + γ + MC + γ/γ′ eutectic. Due to the segregation of Hf and Zr to the very last liquid to solidify, a low melting point γ/Ni{sub 5}(Hf,Zr) constituent was observed. The as-solidified microstructures of both Mar-M247(Nb) and Mar-M247 were constituted of columnar dendrites of gamma matrix (γ) phase with cuboidal gamma-prime (γ′) precipitates. In addition, γ/γ′-eutectic was observed in the interdendritic region along with MC carbides in blocky, script (blocky dendritic), needle-like and fine nodular morphologies. Both alloys contained about 1.5 vol.% of MC carbides. The MC carbides in Mar-M247(Nb) and Mar-M247 are, respectively, Nb-rich and Ta-rich, with only a limited amount of Hf being detected in the MC phase. The yield stress of Nb-modified Mar-M247 showed higher values up to 750 °C. For higher temperatures, above 800 °C, a conventional Mar-M247 presented a higher value of yield stress.

36 MATERIALS SCIENCE↗

Deformation Behavior of Pure Copper Castings with As-Cast Surfaces for Electrical Parts

Herein, the tensile deformation behavior of pure copper castings with as-cast surfaces was investigated. It was found that small and sufficiently large uniform elongation types corresponded, respectively, to the presence or absence of a Cu-Cu{sub 2}O eutectic phase in the microstructure. Fissure defects were observed near the as-cast surfaces when the eutectic phase was present, probably leading to stress concentration. On the other hand, surface pinholes were observed when the eutectic phase was absent, and these were not prevented by directional solidification. Although the as-cast specimens (non-directionally solidified) exhibited a slightly reduced uniform elongation compared to the machined specimens in the absence of the eutectic phase, the directionally solidified as-cast samples exhibited a uniform elongation that was similar to that of the machined specimens. In addition, micropore arrays were formed along the grain boundaries inside the castings when the eutectic phase was absent, whereas almost no micropores were observed inside the directionally solidified as-cast specimens because the solidification process involved a faster cooling rate and/or higher temperature gradient. These results do not only suggest the existence of surface pinholes but also indicate that microporosity can reduce the cross-sectional area of the specimens, thus, affecting their uniform elongation.

36 MATERIALS SCIENCE↗

Building blocks for a digital twin of additive manufacturing

Properties and serviceability of additively manufactured components are affected by their geometry, microstructure and defects. These important attributes are now optimized by trial and error because the essential process variables cannot currently be selected from scientific principles. A recourse is to build and rigorously validate a digital twin of the additive manufacturing process that can provide accurate predictions of the spatial and temporal variations of metallurgical parameters that affect the structure and properties of components. Key building blocks of a computationally efficient first-generation digital twin of laser-based directed energy deposition additive manufacturing utilize a transient, three-dimensional model that calculates temperature and velocity fields, cooling rates, solidification parameters and deposit geometry. The measured profiles of stainless steel 316L and Alloy 800H deposits as well as the secondary dendrite arm spacing (SDAS) and Vickers hardness measurements are used to validate the proposed digital twin. The predicted cooling rates, temperature gradients, solidification rates, SDAS and micro-hardness values are shown to be more accurate than those obtained from a commonly used heat conduction calculation. Finally, these metallurgical building blocks serve as a phenomenological framework for the development of a digital twin that will make the expanding knowledge base of additive manufacturing usable in a practical way for all scientists and engineers.

36 MATERIALS SCIENCE↗

A stochastic scan strategy for grain structure control in complex geometries using electron beam powder bed fusion

Spatial control of microstructure within a three-dimensional component has been a dream of materials scientists for centuries. However, limitations in traditional manufacturing processes prevent detailed control over the distribution of microstructures in a single part. Here, we demonstrate the ability to control grain structure and crystallographic texture during metal additive manufacturing for arbitrary cross-sections of a practical size, with profound implications for the design and optimization of next-generation products. The key to this advance is a new geometry agnostic scan path algorithm that manipulates the spatial distribution of solidification conditions. Utilizing a fundamental understanding of solidification dynamics and a model of the heat transfer during processing, we have designed this algorithm to manipulate the natural competition between epitaxial dendrite growth and grain nucleation. With this algorithm, we successfully controlled the grain structure of Ni-based superalloy IN718 in the shape of the Mona Lisa.

36 MATERIALS SCIENCE↗

3D Printed eutectic aluminum alloy has facility for site-specific properties

Additive manufacturing (AM) has the ability to print structures with site-specific properties. Existing AM approaches for site-specific properties are, however, based on complex processing-microstructure relationships in conventional alloys that were not designed for this purpose. Here, in this work, we report a straightforward approach for achieving site-specific properties that takes advantage of eutectic solidification characteristics. We demonstrate that the yield strength of a eutectic Al-Cu-Ce-Zr alloy can be tuned by varying the laser scan speed in concert with hatch spacing in laser powder bed fusion AM. A faster speed increases solidification rate resulting in finer eutectic spacing and higher strength. The hatch spacing is reduced at faster speeds to ensure overlap between melt pools which become smaller with increasing scan speed. The yield strength and its anisotropy relative to build direction are further tunable with a heat treatment. The scan speed-eutectic spacing-strength relationship is successfully applied to print a complex pattern of site-specific hardness in the alloy. The generalized principle of using AM for a eutectic alloy to create site-specific properties and anisotropy in properties is demonstrated.

36 MATERIALS SCIENCE↗

Segmentation of tomography datasets using 3D convolutional neural networks

Dendritic microstructures are ubiquitous in nature and are the primary solidification morphologies in metallic materials. Techniques such as X-ray computed tomography (XCT) have provided new insights into dendritic phase transformation phenomena. However, manual identification of dendritic morphologies in microscopy data can be both labor intensive and potentially ambiguous. The analysis of 3D datasets is particularly challenging due to their large sizes (terabytes) and the presence of artifacts scattered within the imaged volumes. Here, in this study, we trained 3D convolutional neural networks (CNNs) to segment 3D datasets. Three CNN architectures were investigated, including a new version of FCDenseNet which we extended to 3D. We show that using hyperparameter optimization (HPO) and fine-tuning techniques, both 2D and 3D CNN architectures outperform the previous state of the art. The 3D U-Net architecture trained in this study produced the best segmentations according to quantitative metrics (intersection-over-union of 95.56% and a boundary displacement error of 0.58 pixels), while 3D FCDense produced the smoothest boundaries and best segmentations according to visual inspection. The trained 3D CNNs are able to segment entire 852 × 852 × 250 voxel 3D volumes in only ~60 s, thus hastening the progress towards a deeper understanding of phase transformation phenomena such as dendritic solidification.

36 MATERIALS SCIENCE↗

Massively parallel phase-field simulations targeting exascale

The interface thickness in the phase-field (PF) method limits its simulation scales. Consequently, large-scale PF simulations become prohibitively expensive for resolving the extremely fine microstructures that typically form during rapid solidification processing. This challenge is significant in predicting microstructure evolution in metal additive manufacturing and has been identified by the United States Department of Energy’s Exascale Computing Project. Here, to address this, we develop a multi-GPU and MPI-based massively parallel simulation code, utilizing state-of-the-art algorithms, software, and libraries, for large-scale three-dimensional (3D) PF simulations. We report the first GPU-parallel PF simulations on Frontier (currently the second TOP500 exascale cluster) and Summit machines, taking dendritic growth as an example problem. We evaluate the parallel performance of our implementation using scaling studies with more than 24 000 GPUs (among the largest known computations to date) and the acceleration performance using large-scale simulations of dendritic growth in 3D. Finally, massively parallel GPUs in these supercomputers enabled the first coupled multiscale simulations of laser melting and subsequent dendritic solidification on the scale of a full melt-pool, demonstrating the feasibility of performing PF simulations with a point total over 2 billion grid points within an acceptable time.

Exascale↗

Effect of Sb substitution on crystal structure, texture and hard magnetic properties of melt-spun MnBi alloys

Melt-spun Mn 50 Bi 50-x Sb x alloys with x ≤ 5 were prepared at different solidification rates and characterized both in the as-spun state and after annealing. In the as-spun alloys, the Sb substitution leads to the formation of a metastable phase, similar to the binary "quenched high-temperature phase" but without the superstructure of the latter and exhibiting a different – increasing – temperature dependence of coercivity. The new nanocrystalline metastable phase is not only itself characterized by a high room-temperature coercivity (in excess of 20 kOe), but upon annealing it transforms into a high-coercivity (up to 13.5 kOe) "low-temperature" α phase. However, the advantage of obtaining a high coercivity without the otherwise required milling made possible by the Sb substitution is undermined by the absence of a local crystallographic texture in the melt-spun alloys. The best combination of the isotropic hard magnetic properties realized for the Mn 55 Bi 43.5 Sb 1.5 composition is a remanence of 35.5 emu/g and a coercivity of 8.1 kOe. The annealed Sb-free Mn 50 Bi 50 alloys did possess a local crystallographic alignment and, for high solidification rates, a moderate coercivity up to 5.6 kOe; however, they had an inadequate "rectangularity" in the demagnetization curve. The orthorhombic compound known as MnBi 0.9 Sb 0.1 and described earlier as antiferromagnetic was obtained in the annealed ribbons with x ≈ 5. The compound was found to order ferromagnetically between 200 K and ≈250 K and to exhibit a significant coercivity, 14.3 kOe at 50 K. Here, it is suggested that the MnBi 0.9 Sb 0.1 may actually be a Sb-stabilized "new phase" observed earlier as metastable in the Bi–MnBi eutectic alloys.

36 MATERIALS SCIENCE↗

The study of the crystalline phosphates of kosnarite type structure containing different alkali metals

The incorporation possibilities of different alkali elements into crystalline phosphates A{sub 1-x}A'{sub x}Hf{sub 2}(PO{sub 4}){sub 3} (A=Li, Na, K, Rb, Cs) were studied, the formation regions of kosnarite solid solutions were determined. Na{sub 0.5}K{sub 0.5}Hf{sub 2}(PO{sub 4}){sub 3} crystal structure was studied by powder X-ray diffraction, and the distribution of alkali metals in kosnarite structure was found out. The phosphate crystallizes in the space group R3c, with a=8.7295(1) A, c=23.2023(4) A, V=1531.24(4) A{sup 3}, Z=6; R{sub wp}=6.15, R{sub p}=4.43. The concentration region knowledge of the kosnarite phase existence and peculiarities of their phase formation in the A{sub 1-x}A'{sub x}M{sub 2}(PO{sub 4}){sub 3} (M=Ti, Zr, Hf) systems allow us to choose phosphate matrice compositions suitable for solidification of reprocessing wastes of spent U-Pu nuclear fuels. - Graphical abstract: The incorporation possibilities of different alkali elements into crystalline phosphates A{sub 1-x}A'{sub x}Hf{sub 2}(PO{sub 4}){sub 3} (A=Li, Na, K, Rb, Cs) were studied, the formation regions of kosnarite solid solutions were determined. Na{sub 0.5}K{sub 0.5}Hf{sub 2}(PO{sub 4}){sub 3} crystal structure was studied by powder X-ray diffraction, and the distribution of alkali metals in kosnarite structure was found out. The phosphate crystallizes in the space group R3c, with a=8.7295(1) A, c=23.2023(4) A, V=1531.24(4) A{sup 3}, Z=6; R{sub wp}=6.15, R{sub p}=4.43. The concentration region knowledge of the kosnarite phase existence and peculiarities of their phase formation in the A{sub 1-x}A'{sub x}M{sub 2}(PO{sub 4}){sub 3} (M=Ti, Zr, Hf) systems allow us to choose phosphate matrice compositions suitable for solidification of reprocessing wastes of spent U-Pu nuclear fuels.

36 MATERIALS SCIENCE↗

Solubility and microstructure in the pseudo-binary PbTe-Ag{sub 2}Te system

The solvus lines of the PbTe and Ag{sub 2}Te phases in the pseudo-binary PbTe-Ag{sub 2}Te system have been determined using diffusion couples and unidirectional solidification by the Bridgman method. The solubilities of both Ag{sub 2}Te in PbTe and PbTe in Ag{sub 2}Te decrease with decrease in temperature. For the former, this change is from 14.9 at% Ag (694 deg. C) to 0.5 at% Ag (375 deg. C), while for the latter it is from 12.4 at% Pb (650 deg. C) to 3.1 at% Pb (375 deg. C). The decrease in solubilities leads to the formation of precipitates of Ag{sub 2}Te in PbTe and PbTe in Ag{sub 2}Te. In particular, fast atomic diffusion in Ag{sub 2}Te results in the precipitation of PbTe even in quenched samples. From the temperature dependence of these solubilities, heats of solution have been determined. In the diffusion couple, the phase boundary moves toward PbTe. In the region between the phase boundary and the initial interface, PbTe transforms to {beta}-Ag{sub 2}Te (cubic) retaining the cube-on-cube orientation relationship. - Graphical abstract: The precipitation in the diffusion couple in fast cooling suggests high chemical diffusivity. The large heat of solution for the Ag{sub 2} Te dissolution in PbTe leads to fine microstructure. Highlights: > The solvus lines were determined by diffusion couples and unidirectional solidification. > The solubilities in both phases decrease with decrease in temperature. > Chemical diffusivity in Ag2Te phase is high. > Heat of solution is one of the key parameters to control the number density of precipitates. > The Ag2Te phase transformed from PbTe in diffusion couples holds the cube-on-cube relationship.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of hot tearing of A206 aluminum alloy using Instrumented Constrained T-shaped Casting method

The hot tearing susceptibility of A206 aluminum alloy was investigated using Instrumented Constrained T-shaped Casting method and the effect of the casting temperature on hot tearing was studied. The Instrumented Constrained T-shaped Casting apparatus enabled real-time measurements of the contraction load developed in the casting and the temperature variations during solidification as a function of time. Critical temperatures and points during solidification of the castings were extracted from these data. The contraction load developed at the coalescence point of the castings was identified as a comparative criterion for predicting the hot tearing susceptibility of the alloys which could be utilized even when no visual tearing had occurred. The results showed that hot tearing susceptibility increased with the casting temperature. This was associated with reduced cooling rate, increased solute segregation and more localized hot spot formation at the T-junction area. Increase in the casting temperature also increased the grain size which may in turn have affected the initiation of the hot tears. The visual observations were further validated with radiographic tests.

36 MATERIALS SCIENCE↗

The influence of Nb, Ti, and Si additions on the liquidus and solidus temperatures and primary microstructure refinement in 0.3C-30Ni-18Cr cast steel

This study explores the effect of niobium, titanium and silicon on the liquidus and solidus temperatures and primary structural refinement in creep-resistant 0.3C-30Ni-18Cr cast steel. Fifteen test alloys were investigated. The concentrations of niobium, titanium and silicon in these alloys ranged from 0.03 to 3.0 wt.%, 0.03 to 1.42 wt.%, and 1.39 to 4.26 wt.%, respectively. It was found that an increase of these elements in 0.3C-30Ni-18Cr cast steel lowered the beginning and ending temperatures of the solidification process, extended the range of solidification temperatures, reduced the density, and refined the microstructure, i.e., reduced the secondary dendrite arm spacing. Alloys with the highest content of the examined elements were reported to contain carbide precipitates, as well as the G phase in an as-cast state.

36 MATERIALS SCIENCE↗

Effect of cooling rate on the microstructure and microhardness of the CuZrAgAl alloy

The effect of cooling rate on the microstructure and microhardness of the Cu{sub 40}Zr{sub 44}Ag{sub 8}Al{sub 8} (at.%) alloy has been studied. The crystalline phases were characterized by X-ray diffraction, optical microscopy and scanning electron microscopy with energy dispersive X-ray spectroscopy, and identified as AlCu{sub 2}Zr, Cu{sub 10}Zr{sub 7} and CuZr{sub 2}. The solidification sequence was established as following: the Cu{sub 10}Zr{sub 7} phase forms first in the periphery of the rod, then following with AlCu{sub 2}Zr phase in the rod center and finally CuZr{sub 2} crystals in Cu-depleted areas. The effect of crystals on the mechanical properties of the Cu{sub 40}Zr{sub 44}Ag{sub 8}Al{sub 8} alloy was also estimated through the microhardness. According to the value of microhardness, inhomogeneous structure of the amorphous matrix is more easily formed for the alloy in the low cooling rate (i.e., 9 mm) as compared with the alloy with fully amorphous state in the large cooling rate (i.e., 3 mm). This inhomogeneous structure was attributed to the composition change of amorphous matrix arising from the forming of crystalline phases due to the low cooling rate. - Highlights: Black-Right-Pointing-Pointer The crystalline phases in the Cu{sub 40}Zr{sub 44}Ag{sub 8}Al{sub 8} alloy were identified. Black-Right-Pointing-Pointer The solidification sequence of Cu{sub 40}Zr{sub 44}Ag{sub 8}Al{sub 8} alloy was verified. Black-Right-Pointing-Pointer The softening and hardening of alloy could be observed due to the crystallization.

36 MATERIALS SCIENCE↗

Microstructural evolution during transient liquid phase bonding of Inconel 738LC using AMS 4777 filler alloy

IN-738LC nickel-based superalloy was joined by transient liquid phase diffusion bonding using AMS 4777 filler alloy. The bonding process was carried out at 1050 Degree-Sign C under vacuum atmosphere for various hold times. Microstructures of the joints were studied by optical and scanning electron microscopy. Continuous centerline eutectic phases, characterized as nickel-rich boride, chromium-rich boride and nickel-rich silicide were observed at the bonds with incomplete isothermal solidification. In addition to the centerline eutectic products, precipitation of boron-rich particles was observed in the diffusion affected zone. The results showed that, as the bonding time was increased to 75 min, the width of the eutectic zone was completely removed and the joint was isothermally solidified. Homogenization of isothermally solidified joints at 1120 Degree-Sign C for 300 min resulted in the elimination of intermetallic phases formed at the diffusion affected zone and the formation of significant {gamma} Prime precipitates in the joint region. - Highlights: Black-Right-Pointing-Pointer TLP bonding of IN-738LC superalloy was performed using AMS 4777 filler alloy. Black-Right-Pointing-Pointer Insufficient diffusion time resulted in the formation of eutectic product. Black-Right-Pointing-Pointer Precipitation of B-rich particles was observed within the DAZ. Black-Right-Pointing-Pointer The extent of isothermal solidification increased with increasing holding time. Black-Right-Pointing-Pointer Homogenizing of joints resulted in the dissolution of DAZ intermetallics.

36 MATERIALS SCIENCE↗