SEARCH · Search NASA

Results for “surface albedo”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

All sources NASA NTRS DOE OSTI

NASA NTRS2004

Clear-Sky Narrowband Albedo Variations Derived from VIRS and MODIS Data

A critical parameter for detecting clouds and aerosols and for retrieving their microphysical properties is the clear-sky radiance. The Clouds and the Earth's Radiant Energy System (CERES) Project uses the visible (VIS; 0.63 m) and near-infrared (NIR; 1.6 or 2.13 m) channels available on same satellites as the CERES scanners. Another channel often used for cloud and aerosol, and vegetation cover retrievals is the vegetation (VEG; 0.86- m) channel that has been available on the Advanced Very High Resolution Radiometer (AVHRR) for many years. Generally, clear-sky albedo for a given surface type is determined for conditions when the vegetation is either thriving or dormant and free of snow. Snow albedo is typically estimated without considering the underlying surface type. The albedo for a surface blanketed by snow, however, should vary with surface type because the vegetation often emerges from the snow to varying degrees depending on the vertical dimensions of the vegetation. For example, a snowcovered prairie will probably be brighter than a snowcovered forest because the snow typically falls off the trees exposing the darker surfaces while the snow on a grassland at the same temperatures will likely be continuous and, therefore, more reflective. Accounting for the vegetation-induced differences should improve the capabilities for distinguishing snow and clouds over different surface types and facilitate improvements in the accuracy of radiative transfer calculations between the snow-covered surface and the atmosphere, eventually leading to improvements in models of the energy budgets over land. This paper presents a more complete analysis of the CERES spectral clear-sky reflectances to determine the variations in clear-sky top-of-atmosphere (TOA) albedos for both snow-free and snow-covered surfaces for four spectral channels using data from Terra and Aqua.. The results should be valuable for improved cloud retrievals and for modeling radiation fields.

Sun-Mack, Sunny↗

NASA NTRS1986

The First International Satellite Land Surface Climatology Project (ISLSCP) field experiment FIFE

The purpose of ISLSCP is to verify the use of satellite data for the estimation of land-surface properties. This is to be done through a series of field experiments using a combination of point measurements on the ground and areal measurements from aircraft overflights. In addition to validating satellite estimates of surface properties, approaches for obtaining areal averages of the radiation, moisture, and heat fluxes from remotely sensed data are to be studied. The procedure for doing this is to combine the surface point measurements of the fluxes with the aircraft areal observations using a surface-energy-balance model. This should make it possible to interpolate between the point estimates of these fluxes and calculate area-averaged quantities. The surface parameters to be estimated from aircraft observations include: surface radiation temperature, albedo, land-cover or vegetation index, and surface soil moisture.

Schmugge, T. J.↗

NASA NTRS1977

The surface abundance and stratigraphy of lunar rocks from data about their albedo

The data pf ground-based studies and surveys of the lunar surface by the Zond and Apollo spacecraft have been used to construct an albedo map covering 80 percent of the lunar sphere. Statistical analysis of the distribution of areas with various albedos shows several types of lunar surface. Comparison of albedo data for maria and continental areas with the results of geochemical orbital surveys allows the identification of the types of surface with known types of lunar rock. The aluminum/silcon and magnesium/silicon ratios as measured by the geochemical experiments on the Apollo 15 and Apollo 16 spacecraft were used as an indication of the chemical composition of the rock. The relationship of the relative aluminum content to the age of crystalline rocks allows a direct dependence to be constructed between the mean albedo of areas and the age of the rocks of which they are composed.

Shevchenko, V. V.↗

NASA NTRS1984

Slant-lidar aerosol extinction measurements and their relation to measured and calculated albedo changes

Lidar and albedo data for a single day on which aerosols increased the surface plus atmospheric albedo above values measured on two surrounding very clean days are presented. The slant-lidar extinction measurement technique used is described along with the equipment and operating procedures. The derivation of optical depths, backscatter-to-extinction ratios, and extinction profiles is addressed, and the use of the lidar-derived optical depths in calculating expected albedo change is considered. Measured and calculated albedo changes are compared, and the results are found to agree within experimental uncertainties.

Russell, P. B.↗

NASA NTRS1989

Dark surfaces of asteroids and comets - Evidence for macromolecular carbon compounds

The presence of very low-albedo material on the surfaces of some classes of asteroids (C,P,D) and most comets appears to be related to macromolecular carbon compounds on these bodies. Preliminary detections of an organic spectral signature have been reported for some asteroids. The complex refractory organics that occur in some meteorites are probably the material that makes low-albedo asteroids dark. Comet surfaces and ejected dust particles are also very low albedo, apparently resulting from the radiation processing of organic ices.

Cruikshank, D. P.↗

NASA NTRSDate not supplied

Surface and Atmospheric Shortwave Radiative Fluxes From ISCCP Data and Fu-Liou Algorithm at Higher Spatial and Vertical Resolution

NASA/GEWEX Surface Radiation Budget (SRB) has provided surface and TOA shortwave and longwave radiative fluxes using International Satellite Cloud Climatology data as the primary input. Release 4.0 came out in 2019, with data from July 1983 through June 2017, and improved validation stats relative to Release 3.0 (Stackhouse et al., 2012). Release 4.0 used the newly reprocessed ISCCP H data set. The shortwave algorithm for versions 3 and 4 has been based on the Pinker and Laszlo (1992) algorithm, which relies on the satellite-measured shortwave radiance to produce a TOA albedo. This background TOA albedo is made utilizing the background clear-sky visible radiance (called clear-sky composite radiance in the ISCCP data) and applying narrowband-to-broadband angular distribution models. Using a climatological aerosol assumption, the surface albedo is estimated using radiative transfer based (i.e., Fu/Liou radiative transfer model; Fu and Liou, 1993) look-up tables. Using this surface albedo and an instantaneous TOA albedo, the look-up tables are used to adjust both the aerosol optical depth (for clear sky) and cloud optical depth (for cloudy sky) for each scene. These properties and look up tables are then used to generate surface fluxes. While this has worked well to provide useful fluxes, it has occasionally resulted in inaccurate direct and diffuse surface SW fluxes due to the overreliance on aerosol optical depth. With increased computational power and storage now available, a more direct approach is now possible. Here we present a different approach for a future high resolution SRB Release 5.0. We replace the Pinker-Laszlo lookup table approach with a forward call to the Fu-Liou radiative transfer model as modified by the CERES team (Rose et al., 2006). In addition to being a proven radiation code, Fu-Liou allows the calculation of fluxes at different atmospheric levels and spectral bands, which will provide more insight into the surface radiation budget, its variability and attribution. It is expected that horizontal resolution will increase to at least 0.5°x0.5° from the current 1°x1°. Here we demonstrate a preliminary look at the next SRB, and show comparisons with the current release.

Earth Radiation Budget↗

NASA NTRS1994

Global shortwave energy budget at the earth's surface from ERBE observations

A method is proposed to compute the net solar (shortwave) irradiance at the earth's surface from Earth Radiation Budget Experiment (ERBE) data in the S4 format. The S4 data are monthly averaged broadband planetary albedo collected at selected times during the day. Net surface shortwave irradiance is obtained from the shortwave irradiance incident at the top of the atmosphere (known) by subtracting both the shortwave energy flux reflected by the earth-atmosphere system (measured) and the energy flux absorbed by the atmosphere (modeled). Precalculated atmospheric- and surface-dependent functions that characterize scattering and absorption in the atmosphere are used, which makes the method easily applicable and computationally efficient. Four surface types are distinguished, namely, ocean, vegetation, desert, and snow/ice. Over the tropical Pacific Ocean, the estimates based on ERBE data compare well with those obtained from International Satellite Cloud Climatology Project (ISCCP) B3 data. For the 9 months analyzed the linear correlation coefficient and the standard difference between the two datasets are 0.95 and 14 W/sq m (about 6% of the average shortwave irradiance), respectively, and the bias is 15 W/sq m (higher ERBE values). The bias, a strong function of ISCCP satellite viewing zenith angle, is mostly in the ISCCP-based estimates. Over snow/ice, vegetation, and desert no comparison is made with other satellite-based estimates, but theoretical calculations using the discrete ordinate method suggest that over highly reflective surfaces (snow/ice, desert) the model, which accounts crudely for multiple reflection between the surface and clouds, may substantially overestimate the absorbed solar energy flux at the surface, especially when clouds are optically thick. The monthly surface shortwave irradiance fields produced for 1986 exhibit the main features characteristic of the earth's climate. As found in other studies, our values are generally higher than Esbensen and Kushnir's by as much as 80 W/sq m in the tropical oceans. A cloud parameter, defined as the difference between clear-sky and actual irradiances normalized to top-of-atmosphere clear-sky irradiance, is also examined. This parameter, minimally affected by sun zenith angle, is higher in the midlatitude regions of storm tracks than in the intertropical convergence zone (ITCZ), suggesting that, on average, the higher cloud coverage in midlatitudes is more effective at reducing surface shortwave irradiance than opaque, convective, yet sparser clouds in the ITCZ. Surface albedo estimates are realistic, generally not exceeding 0.06 in the ocean, as high as 0.9 in polar regions, and reaching 0.5 in the Sahara and Arabian deserts.

Breon, Francois-Marie↗

NASA NTRS1982

Classification of surface units in the equatorial region of Mars based on Viking Orbiter color, albedo, and thermal data

Clusters corresponding to mappable surface units are sought in Viking Orbiter color, albedo, and thermal inertia data for the equatorial region of Mars. A principal components analysis indicated that 84% of the variance within the data for this region can be carried along two vector directions which typify the dominant trend of Martian surface materials. These dominant trends were deemphasized by stretching the data from a five-dimensional elliptical swarm into a hypersphere, through the use of principal component techniques. The decorrelated data were then plotted in a triangle diagram with red/violet, albedo and thermal inertia apices to facilitate inherent cluster discrimination. As many as eight clusters can be identified, with important mixing between them. The three major clusters consist of red and grey material extremes, along with intermediate value materials.

Arvidson, R. E.↗

NASA NTRS1979

Phobos and Deimos - A preview of what asteroids are like

The surfaces of Phobos and Deimos are discussed, as the best available examples of what asteroid surfaces may be like. Attention is given to shape, regolith properties, crater densities, albedo markings and surface gravities. It is found that although the surfaces of these two similarly-sized asteroid-like bodies are nearly identical in terms of many disk-integrated properties, they are strikingly different in surface morphology.

Veverka, J.↗

NASA NTRS1988

Sensitivity of satellite-derived net shortwave irradiance at the Earth's surface to radiometric calibration

The effect of radiometric calibration uncertainties on satellite-derived net shortwave irradiance at the Earth's surface was examined. Net shortwave irradiance sensitivity to calibration is expressed as a function of two basic components that depend on surface and cloud albedo sensitivities, respectively. The analysis of these sensitivities for a wide range of atmospheric and surface conditions, as well as radiation geometries, shows that a 10 percent uncertainty in the calibration induces up to 40 W/sqm errors in instantaneous net shortwave irradiance (negative when the calibration uncertainty is positive). The maximum relative errors are obtained in overcast conditions when cloud albedos are high. On a monthly time scale, the induced error becomes typically 13 W/sqm in the tropics and 16 W/sqm in higher latitude regions during summer. The error almost vanishes at high latitudes during winter. A 10 percent positive uncertainty in the calibration gives a net shortwave irradiance error similar to that induced by the 3 hr sampling of the ISCCP Project.

Gautier, C.↗

NASA NTRS1984

Voyager photometry of Iapetus

Voyager images of Saturn's satellite Iapetus ranging in phase angle from 8 to 90 deg have been used to define the satellite's photometric properties and construct an albedo map of its surface. Iapetus shows variations in reflectance across its surface of a factor of 10 to 20, the greatest albedo range known for a solar system object. It is darkest at the apex of orbital motion, becomes brighter away from the apex, and is brightest near the poles. The 'boundary' between light and dark material is gradual rather than sharp. The photometric properties of the surface are adequately described by a lunarlike photometric function, but the surface phase function varies with albedo. The dark material on Iapetus is reddish, the bright material somewhat less so.

Squyres, S. W.↗

NASA NTRS1989

The effects of the Arctic haze as determined from airborne radiometric measurements during AGASP II

The effect of the Arctic-haze aerosol on the parameters of solar radiation was investigated using airborne radiometric measurements of radiation parameters during the second Arctic Gas and Aerosol Sampling Project. Simultaneously with absorption measurements, optical depths and total, direct, and scattered radiation fields were determined. The experimentally determined parameters were used to define an aerosol model, which was then used to calculate atmospheric heating rate profiles. It was found that, besides the increased absorption (30 to 40 percent) and scattering of radiation by the atmosphere, Arctic haze reduces the surface absorption of solar energy by 6 to 10 percent, and the effective planetary albedo over ice surfaces by 3 to 6 percent.

Valero, Francisco P. J.↗

NASA NTRS2001

Atmospheric Constraints on Landing Site Selection

The Martian atmosphere is a significant part of the environment that the Mars Exploration Rovers (MER) will encounter. As such, it imposes important constraints on where the rovers can and cannot land. Unfortunately, as there are no meteorological instruments on the rovers, there is little atmospheric science that can be accomplished, and no scientific preference for landing sites. The atmosphere constrains landing site selection in two main areas, the entry descent and landing (EDL) process and the survivability of the rovers on the surface. EDL is influenced by the density profile and boundary layer winds (up to altitudes of 5 to 10 km). Surface survivability involves atmospheric dust, temperatures and winds. During EDL, the atmosphere is used to slow the lander down, both ballistically and on the parachute. This limits the maximum elevation of the landing site to -1.3 km below the MOLA reference aeroid. The landers need to encounter a sufficiently dense atmosphere to be able to stop, and the deeper the landing site, the more column integrated atmosphere the lander can pass through before reaching the surface. The current limit was determined both by a desire to be able to reach the hematite region and by a set of atmosphere models we developed for EDL simulations. These are based on Thermal Emission Spectrometer (TES) atmospheric profile measurements, Ames Mars General Circulation Model (MGCM) results, and the 1-D Ames GCM radiative/convective model by J. Murphy. The latter is used for the near surface diurnal cycle. The current version of our model encompasses representative latitude bands, but we intend to make specific models for the final candidate landing sites to insure that they fall within the general envelope. The second constraint imposed on potential landing sites through the EDL process is the near surface wind. The wind in the lower approximately 5 km determines the horizontal velocity that the landers have when they land. Due to the mechanics of the landing process, the total velocity (including both the horizontal and vertical components) determines whether or not the landers are successful. Unfortunately, the landing system has no easy way to nullify any horizontal velocity imparted by the wind, so the landing sites selected need to have as little wind as possible. In addition to the mean wind velocity, the landing system is sensitive to vertical wind shear in the lowest kilometer or so. Wind shear can deflect the retro rockets (RADs) from their nominal vertical orientation producing unwanted horizontal spacecraft velocities. Both mean velocity and wind shear are dominated by the the local topography and other surface properties (in particular albedo and thermal inertia which control the surface temperature). This is seen even in simplified 2-D mesoscale models. The effects in a fully 3-D model are expected to he even more topographically dependent. In particular there is potential for wind channeling in canyons and other terrain features. Boundary layer winds and wind shear are currently being modeled based on terrestrial data and boundary layer scaling laws modified for Martian conditions. We hope to supplement this with mesoscale model results (from several sources) once the number of landing sites is reduced to a manageable number.

Kass, David M.↗

NASA NTRS2005

Cassini Imaging Results at Titan

The Cassini Imaging Science Subsystem (ISS) images show striking albedo markings on the surface of Titan. In equatorial regions the albedo patterns have high contrast and exhibit prominent lineaments and linear/angular boundaries suggestive of tectonic influences or fracturing of brittle surficial materials. There are intriguing dark curving lines near the south pole. Here we present several working hypotheses to explain these patterns. We also briefly summarize atmospheric science results.

McEwen, A.↗

NASA NTRS2005

The Effects of Atmospheric Opacity on the Seasonal Variation of Martian Surface Temperature

The daily and seasonal variation of surface temperature is a central element in the description of martian climate. Surface thermal inertia and albedo are critical boundary inputs for simulating surface temperature in Mars general circulation models (MGCMs). Thermal inertia (TI) is also of intrinsic interest as it may be related to regolith properties such as particle size and surface character and so high spatial resolution is desirable. The recent mapping of TI at very high (0.25 deg) spatial resolution was achieved by fitting a thermal model to surface temperature observations obtained over a broad range of several martian years. However, varying atmospheric opacity (dust and water ice clouds) can significantly influence the estimated TI field and this effect was not fully compensated for. Opacity leads to an increase in morning temperature and a decrease in afternoon temperature, thus increasing the apparent thermal inertia.

Wilson, R. J.↗

NASA NTRS1981

Theoretical interpretation of photometric properties of the Martian surface and atmosphere

Earth-based UBV photometry, photographs from the Lowell Observatory, and Mariner 9 data are combined with a new radiative transfer theory to derive physical parameters for the Martian surface and atmosphere, both before and during the 1971 dust storm. Storm dust particles had a single scattering albedo of 0.84 plus or minus 0.02 and an asymmetry factor of 0.35 plus or minus 0.10 in green (V) light. The geometric albedo of Mars was 0.15 and the phase integral 1.83, yielding 0.27 for the Bond albedo. The mean optical thickness of the 'clear' atmosphere averaged over the whole planet was 0.15 plus or minus 0.05 and was not dependent on wavelength. Geometric albedos for the surface are 0.25 (light areas) and 0.17 (dark areas) in V, 0.095 in B, and 0.060 in U. The soil particles are moderately backward scattering with an asymmetry factor of minus 0.20, and therefore rather opaque. The mean surface roughness is 0.57, representing the depth/radius ratio of an average hole, and being only one-half as large as values typical for the moon and asteroids.

Lumme, K.↗

NASA NTRS1975

The search for the cause of the low albedo of the moon

Experimentation concerning lunar weathering and its effect on the albedo of the surface cover consisted of: (1) determination of the surface chemical composition of lunar soil and ground-up rock samples by Auger electron spectroscopy, (2) measurement of the optical albedo of these samples, and (3) proton or alpha-particle irradiation of terrestrial rock chips and rock powders and of ground-up lunar rock samples in order to determine the optical and surface chemical effect of simulated solar wind.

Gold, T.↗

NASA NTRS1994

Assessment of climate variability of the Greenland Ice Sheet: Integration of in situ and satellite data

The proposed research involves the application of multispectral satellite data in combination with ground truth measurements to monitor surface properties of the Greenland Ice Sheet which are essential for describing the energy and mass of the ice sheet. Several key components of the energy balance are parameterized using satellite data and in situ measurements. The analysis will be done for a ten year time period in order to get statistics on the seasonal and interannual variations of the surface processes and the climatology. Our goal is to investigate to what accuracy and over what geographic areas large scale snow properties and radiative fluxes can be derived based upon a combination of available remote sensing and meteorological data sets. Operational satellite sensors are calibrated based on ground measurements and atmospheric modeling prior to large scale analysis to ensure the quality of the satellite data. Further, several satellite sensors of different spatial and spectral resolution are intercompared to access the parameter accuracy. Proposed parameterization schemes to derive key component of the energy balance from satellite data are validated. For the understanding of the surface processes a field program was designed to collect information on spectral albedo, specular reflectance, soot content, grain size and the physical properties of different snow types. Further, the radiative and turbulent fluxes at the ice/snow surface are monitored for the parameterization and interpretation of the satellite data. The expected results include several baseline data sets of albedo, surface temperature, radiative fluxes, and different snow types of the entire Greenland Ice Sheet. These climatological data sets will be of potential use for climate sensitivity studies in the context of future climate change.

Steffen, K.↗