Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface codes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

RISK-INFORMED EXTERNAL HAZARDS ANALYSIS BY EEVE TOOLKIT

Introducing risk-informed safety analyses for external events can bring sensible benefits to the nuclear power industry easing the regulatory burden introduced in the aftermath of the Fukushima accident. In the framework of the US-DOE Light-Water Reactor Sustainability program, Risk-Informed Margin Characterization project (LWRS-RISMC), research activities were conducted at INL for developing and applying a toolkit for performing risk-informed external hazards analysis. The “EEVE” (External EVEnts) toolkit, a chain of INL and state-of-the-art codes, was set-up and applied for simulating earthquake-induced transients with internal flooding in a PWR. This was done using methodology set-up for evaluating new data and determining critical areas that would benefit most from advanced analysis methods. The methodology is agnostic and it can be applied to other external hazards than just seismic and flooding (e.g., high winds, intense precipitation, etc.). The first step was the deterministic calculations for evaluating the propagation of a set of earthquakes and for determining the effects on a fire suppression system in an auxiliary building. These deterministic calculations were performed using the LS-DYNA and the OPENSEE structural mechanics codes. Probability failures and event trees of a generic 3-loops Westinghouse PWR were derived from a generic SAPHIRE model. Seismically induced Loss of Offsite Power, Station Blackout, and fire suppression piping failure events were considered. SAPHIRE code allowed a pre-screening of all possible branches of the event tree and a selection of those with the largest Core Damage Frequency increase for further analysis using dynamic PRA methods. INL's EMRALD code performed dynamic PRA calculations of the identified sequences, integrating risk analysis with on-line deterministic safety analysis results (seismically-induced internal flooding calculations by NEUTRINO code and system analysis by RELAP5-3D code). RELAP5-3D Best-Estimate calculations coupled with RAVEN statistical code were used for deriving limit surfaces as function of relevant transient parameters. This data was used by EMRALD for determining the final core status (core damage/core safe). Finally, the coupling of seismic, flooding, system thermal-hydraulic, uncertainty quantification and probabilistic risk analysis for an advanced risk-informed external hazards analysis was demonstrated. Results showed the sensible decrease in the level of conservatism achieved using the developed risk-informed methodology, which allowed also improving the evaluation of the failure modes and failure probabilities of different components.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Performance Tests of Snow-Related Variables Over the Tibetan Plateau and Himalayas Using a New Version of NASA GEOS-5 Land Surface Model that Includes the Snow Darkening Effect

The snow darkening effect, i.e. the reduction of snow albedo, is caused by absorption of solar radiation by absorbing aerosols (dust, black carbon, and organic carbon) deposited on the snow surface. This process is probably important over Himalayan and Tibetan glaciers due to the transport of highly polluted Atmospheric Brown Cloud (ABC) from the Indo-Gangetic Plain (IGP). This effect has been incorporated into the NASA Goddard Earth Observing System model, version 5 (GEOS-5) atmospheric transport model. The Catchment land surface model (LSM) used in GEOS-5 considers 3 snow layers. Code was developed to track the mass concentration of aerosols in the three layers, taking into account such processes as the flushing of the compounds as liquid water percolates through the snowpack. In GEOS-5, aerosol emissions, transports, and depositions are well simulated in the Goddard Chemistry Aerosol Radiation and Transport (GO CART) module; we recently made the connection between GOCART and the GEOS-5 system fitted with the revised LSM. Preliminary simulations were performed with this new system in "replay" mode (i.e., with atmospheric dynamics guided by reanalysis) at 2x2.5 degree horizontal resolution, covering the period 1 November 2005 - 31 December 2009; we consider the final three years of simulation here. The three simulations used the following variants of the LSM: (1) the original Catchment LSM with a fixed fresh snowfall density of 150 kg m-3 ; (2) the LSM fitted with the new snow albedo code, used here without aerosol deposition but with changes in density formulation and melting water effect on snow specific surface area, (3) the LSM fitted with the new snow albedo code as same as (2) but with fixed aerosol deposition rates (computed from GOCART values averaged over the Tibetan Plateau domain [Ion.: 60-120E; lat.: 20-50N] during March-May 2008) applied to all grid points at every time step. For (2) and (3), the same setting on the fresh snowfall density as in (1) was used.

Yasunari, Tppei J.↗

LDEF environment modeling updates

An updated gas dynamics model for gas interactions around the LDEF is presented that includes improved scattering algorithms. The primary improvement is more accurate predictions of surface fluxes in the wake region. The code used is the Integrated Spacecraft Environments Model (ISEM). Additionally, initial results of a detailed ISEM prediction model of the Solar Array Passive LDEF Experiment (SAMPLE), A0171, is presented. This model includes details of the A0171 geometry and outgassing characteristics of the many surfaces on the experiment. The detailed model includes the multiple scattering that exists between the ambient atmosphere, LDEF outgassing, and atomic oxygen erosion products. Predictions are made for gas densities, surface fluxes and deposition at three different time periods of the LDEF mission.

Gordon, Tim↗

Development of a coupling code for PWR reactor cavity radiation streaming calculation

PWR reactor cavity radiation streaming is important for the safe of the personnel and equipment, thus calculation has to be performed to evaluate the neutron flux distribution around the reactor. For this calculation, the deterministic codes have difficulties in fine geometrical modeling and need huge computer resource; and the Monte Carlo codes require very long sampling time to obtain results with acceptable precision. Therefore, a coupling method has been developed to eliminate the two problems mentioned above in each code. In this study, we develop a coupling code named DORT2MCNP to link the Sn code DORT and Monte Carlo code MCNP. DORT2MCNP is used to produce a combined surface source containing top, bottom and side surface simultaneously. Because SDEF card is unsuitable for the combined surface source, we modify the SOURCE subroutine of MCNP and compile MCNP for this application. Numerical results demonstrate the correctness of the coupling code DORT2MCNP and show reasonable agreement between the coupling method and the other two codes (DORT and MCNP). (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Mapping of the HIDRA stellarator magnetic flux surfaces

The Hybrid Illinois Device for Research and Applications (HIDRA) is a classical stellarator designed for conducting plasma material interaction experiments and developing novel Plasma Facing Components (PFCs). Notably, the testing of two open-channel liquid lithium PFCs is imminent. Determining the shape of the plasma and its magnetic structure inside HIDRA is essential to carry out these tests. For this, electron traces were captured to build up the images of the HIDRA magnetic flux surfaces for several magnetic configurations, following the same procedure previously employed on the WEGA stellarator coupling an electron gun with a fluorescent detector. The FIELDLINES code has then been used to generate computational surfaces matching the experimental results. The obtained surfaces were found to be subject to a similar n = 1 error field as the one observed on WEGA, suggesting that the origin of this error field is inherent to the HIDRA vacuum vessel. Also, the effect of adding a vertical field was investigated, demonstrating the ability to radially shift the magnetic axis and move to a regime free of low-order rational resonances. Finally, this additional control over the HIDRA plasma and magnetic structure allows more freedom in setting up the PFC tests in the limiter and divertor regions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of surface catalysis on heating to ceramic coated thermal protection systems for transatmospheric vehicles

This paper describes the effect of surface catalysis on the heat transfer rate to the heat shield of a typical Transatmospheric Vehicle (TAV) during ascent and atmospheric entry. Surface kinetics and optical properties obtained from arc-jet tests on candidate thermal protection systems (coated metals) were used in a reacting boundary layer code to estimate the heating distribution along the surface of a TAV. Thermochemical stability of the coatings is described in terms of reduction in emittance and loss of opacifiers from the coatings during the arc-jet tests.

Stewart, David A.↗

Validation of the Hypersolve CFD Solver for Entry Descent and Landing Applications

The functional equivalence of the HyperSolve unstructured edge-based, finite-volume computational fluid dynamics code to the Langley Aerothermodynamic Upwind Relaxation Algorithm multiblock structured grid code is documented for applications of interest to the Entry, Descent, and Landing community. A suite of cases using a range of thermochemical gas models on relevant vehicle configurations were analyzed with both codes and the results compared. A tolerance of ±4% difference in surface pressure and surface heat flux from a benchmark LAURA solution was used as the criterion for functional equivalence, and comparisons of flowfield quantities are also included to verify that the thermochemical nonequilibrium capabilities in HyperSolve match those of the LAURA code. The functional equivalence of the HyperSolve unstructured edge-based finite-volume computational fluid dynamics (CFD) code to the Langley Aerothermodynamic Upwind Relaxation Algorithm (LAURA) multiblock structured grid code is documented for applications of interest to the Entry, Descent, and Landing (EDL) community. A suite of cases using a range of thermochemical gas models on EDL-relevant vehicle configurations were analyzed with both codes and the results compared. A tolerance of ±4% difference in surface pressure and surface heat flux from a benchmark LAURA solution was used as the criterion for functional equivalence, and comparisons of flow field quantities are also included to verify that the thermochemical nonequilibrium capabilities in HyperSolve match those of the LAURA code. In general, HyperSolve predictions for surface pressure and surface heat flux are in close agreement with those predicted by LAURA.

hypersolve↗

Validation of the HyperSolve CFD Solver for Entry Descent and Landing Applications

The functional equivalence of the HyperSolve unstructured edge-based, finite-volume computational fluid dynamics code to the Langley Aerothermodynamic Upwind Relaxation Algorithm multiblock structured grid code is documented for applications of interest to the Entry, Descent, and Landing community. A suite of cases using a range of thermochemical gas models on relevant vehicle configurations were analyzed with both codes and the results compared. A tolerance of ±4% difference in surface pressure and surface heat flux from a benchmark LAURA solution was used as the criterion for functional equivalence, and comparisons of flowfield quantities are also included to verify that the thermochemical nonequilibrium capabilities in HyperSolve match those of the LAURA code. The functional equivalence of the HyperSolve unstructured edge-based finite-volume computational fluid dynamics (CFD) code to the Langley Aerothermodynamic Upwind Relaxation Algorithm (LAURA) multiblock structured grid code is documented for applications of interest to the Entry, Descent, and Landing (EDL) community. A suite of cases using a range of thermochemical gas models on EDL-relevant vehicle configurations were analyzed with both codes and the results compared. A tolerance of ±4% difference in surface pressure and surface heat flux from a benchmark LAURA solution was used as the criterion for functional equivalence, and comparisons of flow field quantities are also included to verify that the thermochemical nonequilibrium capabilities in HyperSolve match those of the LAURA code. In general, HyperSolve predictions for surface pressure and surface heat flux are in close agreement with those predicted by LAURA.

hypersolve↗

Single Airfoil Gust Response Problem: Category 3, Problem 1

An unsteady aerodynamic code, called GUST3D (ref. 3), has been developed to solve equation (8) for flows with periodic vortical disturbances. The code uses a frequency-domain approach with second-order central differences and a pressure radiation condition in the far field. GUST3D requires as input certain mean flow quantities which are calculated separately by a potential flow solver. The solver calculates the mean ow using a Gothert's Rule approximation (ref. 3). On the airfoil surface, it uses the solution calculated by the potential code FLO36 (ref. 4). Figures 1-2 show the mean pressure along the airfoil surface for the two airfoil geometries. In Figures 3 - 8, we present the RMS pressure on the airfoil surface. Each figure shows three GUST3D solutions (calculated on grids with different far-field boundary locations). Three solutions are shown to provide some indication of the numerical uncertainty in the results. Figures 9 - 13 present the acoustic intensity. We again show three solutions per case. Note that no results are presented for the k1 = k2 = 2.0 loaded airfoil case, as an acceptable solution could not be obtained. A few comments need to be made about the results shown. First, since the last Workshop, the GUST3D code has been substantially upgraded. This includes implementing a more accurate far-field boundary condition (ref. 5) and developing improved gridding capabilities. This is the reason for any differences that may exist between the present results and results from the last Workshop. Second, the intensity results on the circle R = 4C were obtained using a Kirchoff method (ref. 6). The Kirchoff surface was the circle R = 2C. Finally, the GUST3D code is most accurate for low reduced frequencies. A new domain decomposition approach (ref. 7) has been developed to improve accuracy. Both the single domain and domain decomposition approaches were used in generating the present results.

Scott, James R.↗

Los Alamos RAGE Simulations of the HAIV Mission Concept

The mitigation of potentially hazardous objects (PHOs) can be accomplished by a variety of methods including kinetic impactors, gravity tractors and several nuclear explosion options. Depending on the available lead time prior to Earth impact, non- nuclear options can be very effective at altering a PHOs orbit. However if the warning time is short nuclear options are generally deemed most effective at mitigating the hazard. The NIAC mission concept for a nuclear mission has been presented at several meetings, including the last PDC (2013).We use the adaptive mesh hydrocode RAGE to perform detailed simulations of this Hypervelocity Asteroid Intercept Vehicle (HAIV) mission concept. We use the RAGE code to simulate the crater formation by the kinetic impactor as well as the explosion and energy coupling from the follower nuclear explosive device (NED) timed to detonate below the original surface to enhance the energy coupling. The RAGE code has been well validated for a wide variety of applications. A parametric study will be shown of the energy and momentum transfer to the target 100 m diameter object: 1) the HAIV mission as planned; 2) a surface explosion and 3) a subsurface (contained) explosion; both 2) and 3) use the same source energy as 1).Preliminary RAGE simulations show that the kinetic impactor will carve out a surface crater on the object and the subsequent NED explosion at the bottom of the crater transfers energy and momentum to the target effectively moving it off its Earth crossing orbit. Figure 1 shows the initial (simplified) RAGE 2D setup geometry for this study. Figure 2 shows the crater created by the kinetic impactor and Figure 3 shows the time sequence of the energy transfer to the target by the NED.

Asteroid Mitigation↗

Stellarator coil design using cubic splines for improved access on the outboard side

In recent years many efforts have been undertaken to simplify coil designs for stellarators due to the difficulties in fabricating non-planar coils. Additionally, the FOCUS code removes the need for a winding surface and represents the coils as arbitrary curves in 3D. In the following work, the implementation of a spline representation for the coils in FOCUS is described, along with the implementation of a new engineering constraint to design coils with a straighter outer section. The new capabilities of the code are shown as an example on HSX, NCSX, and a prototype quasi-axisymmetric reactor-sized stellarator. The flexibility granted by splines along with the new constraint will allow for stellarator coil designs with improved accessibility and simplified maintenance.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

STREAM II-V5: REVISION OF STREAM II-V4 AQUEOUS TRANSPORT CODE TO ACCOUNT FOR THE EFFECTS OF RAINFALL EVENTS

STREAM II is an aqueous transport model developed by the Savannah River National Laboratory (SRNL) for use in the Savannah River Site (SRS) emergency response program. The transport model of the Water Quality Analysis Simulation Program (WASP) is used by STREAM II to perform contaminant transport calculations. WASP5 is a US Environmental Protection Agency (EPA) water quality analysis program that simulates contaminant transport and fate through surface water. A recent version of the code (STREAM II-V4) predicts peak concentration and peak concentration arrival time at downstream locations for releases from the SRS facilities to the Savannah River. The input flows for STREAM II-V4 are derived from the historical flow records measured by the United States Geological Survey (USGS). The stream flow for STREAM II-V4 is fixed and the flow only varies with the month in which the releases are taking place. Therefore, the effects of flow surge due to a severe storm are not accounted for by STREAM IIV4. STREAM II-V5 is an upgraded version which accounts for the effects of a storm event. The revised model finds the proper stream inlet flow based on the total rainfall and rainfall duration as input by the user. STREAM II-V5 then adjusts the stream segment volumes (cross sections) based on the stream inlet flow. The rainfall based stream flow and the adjusted stream segment volumes are then used for contaminant transport calculations. This paper will discuss the required modifications to STREAM II and a comparison of results between the older and newer versions for an example involving a rainfall event.

54 ENVIRONMENTAL SCIENCES↗

Guide to AERO2S and WINGDES Computer Codes for Prediction and Minimization of Drag Due to Lift

The computer codes, AER02S and WINGDES, are now widely used for the analysis and design of airplane lifting surfaces under conditions that tend to induce flow separation. These codes have undergone continued development to provide additional capabilities since the introduction of the original versions over a decade ago. This code development has been reported in a variety of publications (NASA technical papers, NASA contractor reports, and society journals). Some modifications have not been publicized at all. Users of these codes have suggested the desirability of combining in a single document the descriptions of the code development, an outline of the features of each code, and suggestions for effective code usage. This report is intended to supply that need.

Carlson, Harry W.↗

Radar Reflectivity of the Martian Polar Regions

Radar experiments provide a unique method of probing the surfaces and subsurfaces of planetary bodies. Information on surface and subsurface structures and properties can be extracted from radar data. There is a well developed history of radar investigations of the planet Mars, beginning with the first reports of variations of scattering properties as a function of martian longitude in the mid-1960's. Because of the rapid rotation of Mars, the standard technique of delay-doppler mapping cannot be used as effectively as it is on Mercury and Venus, making it a more difficult radar target. Techniques have been developed to overcome this difficulty, including an inversion technique to combine many doppler-only (CW) experiments from different viewing geometries into a map of surface reflectivity, and new random long-code techniques. These techniques still suffer from ambiguities, however. A third technique which does not suffer from these ambiguities is the combination of the powerful Goldstone transmitter with the VLA as the receiving instrument to create a combined radar imaging instrument. We have used this combined radar instrument to image the surface of Mars in 3.5-cm radar reflectivity during the 1988, 1992/93, and 1999 oppositions. During the 1988 experiments, the residual south polar ice cap (RSPIC) was the brightest radar reflector on the planet - intrinsically brighter than even the Tharsis lava flows. This was quite an unexpected result. In contrast, during the 1992/93 experiments, the residual north polar ice cap (RNPIC) was not nearly so bright, and in fact showed no enhancement at all, This was puzzling, given the 1988 results for the RSPIC. We attributed the lack of a radar reflection enhancement to a combination of three effects: the geometry was different; the season was different; and the intrinsic scattering from the residual ice caps was different. The 1999 experiments provided a chance to test the relative importance of these three effects, since the RNPIC would be visible in a geometry very similar to the RSPIC in 1988, and the season would also be very similar. Preliminary reduction of the data taken in 1999 shows that the RNPIC did in fact show a radar reflectivity enhancement, but that it was still not as bright as the RSPIC in 1988. Details regarding the radar reflectivity of the residual ice caps, as well as the surrounding polar layered terrains (in light of our radar reflectivity data) will be discussed. Additional information is contained in the original extended abstract.

Butler, B. J.↗

GPU-friendly surface model for Monte-Carlo detector simulations

The demands for Monte-Carlo simulation are drastically increasing with the Large Hadron Collider’s high-luminosity upgrade, and are expected to exceed the currently available compute resources. At the same time, modern high-performance computing has adopted powerful hardware accelerators, particularly GPUs. The AdePT and Celeritas projects aim to address the demanding computational needs by leveraging these heterogeneous computing architectures. While both have successfully ported realistic detector simulations to GPUs using the VecGeom library, the complexity of geometry modeling emerged as a bottleneck. Thread divergence and high register usage were degrading the GPU performance. Therefore, a new, GPU-friendly surface-based model has been introduced in the VecGeom library that decomposes the divergent code of the 3D primitive solids into simpler and more balanced surface algorithms. In this work, we present the latest developments, focusing on the additions required to efficiently model complex setups like the CMS Phase-2 geometry. This includes memory reduction techniques, and adding accelerating structures for faster traversal.

Diederichs, Severin [CERN]↗

LEWICE/E: An Euler based ice accretion code

A new version of the LEWICE ice accretion computer code was developed which calculates the ice growth on two dimensional surfaces, incorporating the effects of compressibility through the solution of the Euler equations. The code is modular and contains separate stand-alone program elements that create a grid, calculate the flow field parameters, calculate the droplet trajectory paths, determine the amount of ice growth, and plot results. This code increases the applicability of ice accretion predictions by allowing calculations at higher Mach numbers. The new elements of the code are described. Calculated results are compared to experiment for several cases, including a LEWICE example case and a thin airfoil section at a Mach number of 0.58.

Potapczuk, Mark G.↗

LEWICE/E - An Euler based ice accretion code

A new version of the LEWICE ice accretion computer code was developed which calculates the ice growth on two dimensional surfaces, incorporating the effects of compressibility through the solution of the Euler equations. The code is modular and contains separate stand-alone program elements that create a grid, calculate the flow field parameters, calculate the droplet trajectory paths, determine the amount of ice growth, and plot results. This code increases the applicability of ice accretion predictions by allowing calculations at higher Mach numbers. The new elements of the code are described. Calculated results are compared to experiment for several cases, including a LEWICE example case and a thin airfoil section at a Mach number of 0.58.

Potapczuk, Mark G.↗

A Summary of Validation Results for LEWICE 2.0

A research project is underway at NASA Lewis to produce a computer code which can accurately predict ice growth under any meteorological conditions for any aircraft surface. This report will present results from version 2.0 of this code, which is called LEWICE. This version differs from previous releases due to its robustness and its ability to reproduce results accurately for different point spacing, and time step criteria across general computing platforms. It also differs in the extensive amount of effort undertaken to compare the results in a quantifiable manner against the database of ice shapes which have been generated in the NASA Lewis Icing, Research Tunnel (IRT), The complete set of data used for this comparison is available in a recent contractor report . The result of this comparison shows that the difference between the predicted ice shape from LEWICE 2.0 and the average of the experimental data is 7.2% while the variability of the experimental data is 2.5%.

Wright, William B.↗