SEARCH · Search NASA
Results for “surface steps”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
In situ atomic-scale observation of inhomogeneous oxide reduction
Here, we report in situ atomic-scale transmission electron microscopy observations of the surface dynamics during Cu 2 O reduction. We show inhomogeneous oxide reduction caused by the preferential adsorption of hydrogen at step edges that induces oxygen loss and destabilizes Cu atoms within the step edge, thereby resulting in the retraction motion of atomic steps at the oxide surface.
Heterobinuclear Light Absorber Coupled to Molecular Wire for Charge Transport across Ultrathin Silica Membrane for Artificial Photosynthesis
Coupling of robust, all-inorganic heterobinuclear light absorbers to metal oxide catalysts for water oxidation across an ultrathin product-separating silica membrane requires charge transfer through organic molecular wires embedded in the silica. A synthetic approach for assembling the bimetallic units on the silica surface is introduced that is compatible with the presence of encapsulated organic molecules. Accurate selection and fine tuning of the concentration of embedded conducting wires are enabled by a two-step method consisting of surface attachment of a tripodal anchor, trimethoxysilyl aniline, followed by attachment of p-oligo(phenylene vinylene) through amide linkage. Each step of the assembly process was monitored and characterized by a combination of Fourier transform infrared, Fourier transform-Raman, and UV-vis spectroscopy techniques. Hole transfer was observed from transient Co III , formed by Ti IV OCo II → Ti III OCo III charge transfer excitation of the chromophore, to p-oligo(phenylene vinylene) molecule within the 8 ns width of the photolysis laser pulse by transient optical absorption spectroscopy of the wire radical cation. The rectifying property of the light absorber-wire assembly enabled by appropriate selection of redox potentials of metals and embedded wire obviates the need for a molecularly defined linkage between the components. Combined with the previously observed ultrafast hole injection from the embedded wires to Co oxide catalyst, the result implies visible-light-induced hole transfer from visible-light-excited binuclear light absorber to water oxidation catalyst across the silica separation membrane in a few nanoseconds or faster. Finally, demonstration and understanding of this interfacial charge-transfer step is critical for developing nanoscale core-shell architectures for complete photosynthetic cycles.
Electropolishing parameters study for surface smoothening of low-$\beta$650 MHz five-cell niobium superconducting radio frequency cavity
Electropolishing (EP) is applied to niobium (Nb) superconducting radio frequency (SRF) cavities, which are used in particle accelerators for their surface treatment. The EP process for 1.3 GHz cavities has been extensively studied earlier. In this work, a parametric study on EP of low-β (0.61) 650 MHz Nb SRF cavities (LB650), which will be used in pre-production cryomodule for proton improvement plan-II (PIP-II) linear accelerator, was conducted to determine adequate EP conditions for attaining a smooth surface of the cavities. EP performed with the standard parameters and an initial cathode (cathode-I) having a cathode surface area of ~5% of the cavity surface area yielded a rough equator surface of the cavity. The grain step height on the equator weld position was measured to be ~ 32 μm. The rough surface was attributed to preferential grain etching confirmed by a polarization curve showing a linear relationship between the EP current and voltage and the absence of the current plateau region. The cathode was modified to make its surface area twice that of cathode-I. The modified cathode (cathode-M) provided a current plateau region in the corresponding I-V curves measured at different cavity temperatures. The onset voltage for the plateau was found to be higher at higher cavity temperatures. Here this study revealed that even with cathode-M, the standard 18 V was low for EP of such large-sized cavities when the cavity temperature was 18 °C. EP performed at a higher voltage of 22–24.5 V with cathode-M yielded a smooth surface with a grain step height of only 0.6 μm. The applied EP conditions also improved removal uniformity along the cavity length. In contrast to the cavity treated with cathode-I, the cavities treated with cathode-M achieved a significantly higher accelerating gradient (E acc ) in vertical tests conducted in a cryostat at 2 K. The modified EP was found efficient to produce the cavities that achieved E acc of 22.4 MV/m, required by PIP II project in the baseline RF tests, to qualify for further surface processing used to enhance their quality factors.
A three-dimensional model of the Orion Nebula
We have constructed a geometric model for the Orion Nebula exploiting the fact that most of the radiation arises from a relatively thin layer of ionized material near the ionization front on the near side of the giant molecular cloud OMC-1. As a first step, an extinction corrected surface brightness map of H alpha emission was combined with point by point determinations of the electron density to determine the thickness of the emitting layer across the nebula. The second step involved calculation of the geometry that would satisfy the derived emitting layer thickness constraint, the surface brightness in H alpha, and the assumption that all of the ionizing radiation comes from a single star, theta(sup 1) Ori C. This was done both for the case of a constant gas density along a line of sight and the more realistic case of an exponentially decreasing density. The resulting models show that M42 is a highly irregular object, with regions in the ionization front where the local slope in the geometry is steeper producing higher surface brightnesses. This model also explains local ionization variations near the Bright Bar and the brightest region about 40 sec southwest of theta(sup 1) Ori C.
Direct spontaneous growth and interfacial structural properties of inclined GaN nanopillars on r-plane sapphire
The spontaneous growth of GaN nanopillars (NPs) by direct plasma-assisted molecular beam epitaxy on nitridated r-plane sapphire substrates has been studied. The emanation of metal-polarity NPs from inside an a-plane nonpolar GaN film was found to depend on both the substrate nitridation and the growth conditions. The density of NPs increased with increasing the duration of the nitridation process and the power applied on the radio-frequency plasma source, as well as the III/V flux ratio, while variation of the first two parameters enhanced the roughness of the substrate's surface. Transmission electron microscopy (TEM) techniques were employed to reveal the structural characteristics of the NPs and their nucleation mechanism from steps on the sapphire surface and/or interfacial semipolar GaN nanocrystals. Lattice strain measurements showed a possible Al enrichment of the first 5–6 monolayers of the NPs. By combining cross-sectional and plan-view TEM observations, the three-dimensional model of the NPs was constructed. The orientation relationship and interfacial accommodation between the NPs and the nonpolar a-plane GaN film were also elucidated. The NPs exhibited strong and narrow excitonic emission, suggesting an excellent structural quality.
Influence of Microstructure on the Absorption of Tritium into Gold-Plated 316 Stainless Steel
The interaction of tritium with metal surfaces is the initial step in the overall absorption of tritium by the substrate metal. As a result, limiting the adsorption of tritium to the surface may effectively reduce the quantity of tritium absorbed by a metal when it is in contact with tritium gas. To limit tritium adsorption, many tritium users electroplate gold onto the substrate metal. The gold layer is expected to reduce tritium adsorption, and subsequently absorption, by reducing water adsorption. The present work shows a comparison between tritium inventories in nonplated 316 stainless steel to the inventories in 316 stainless-steel samples electroplated with gold by various commercial vendors and laboratories. Of the various gold-plated samples, only one type of plating shows ~25% reduction in tritium inventory, relative to non-plated steel samples. The degree of tritium absorption appears to be significantly influenced by the porosity, texture, and completeness of the gold layer. Incomplete and/or porous layers lead to increased absorption, while gold layers with smaller surface features lead to similar tritium inventories as non-plated samples. Furthermore, reduced tritium absorption was observed only for complete gold layers with small surface features.
Surface structure of coherently strained ceria ultrathin films
Cerium oxide, or ceria, is an important material for solid oxide fuel cells and water splitting devices. Although the ceria surface is active in catalytic and electrochemical reactions, how its catalytic properties are affected by the surface structure under operating conditions is far from understood. We investigate the structure of the coherently strained CeO 2 ultrathin films on yttria-stabilized zirconia (001) single crystals by specular synchrotron x-ray diffraction (XRD) under oxidizing conditions as a first step to study the surface structure in situ . An excellent agreement between the experiment data and the model is achieved by using a “stacks and islands” model that has a two-component roughness. One component is due to the tiny clusters of nanometer scale in lateral dimensions on each terrace, while the other component is due to slightly different CeO 2 thickness that span over hundreds of nanometers on neighboring terraces. We attribute the nonuniform thickness to step depairing during the thin film deposition that is supported by the surface morphology results on the microscopic level. Importantly, our model also shows that the polarity of the ceria surface is removed by a half monolayer surface coverage of oxygen. In conclusion, the successful resolution of the ceria surface structure using in situ specular synchrotron XRD paves the way to study the structural evolution of ceria as a fuel cell electrode under catalytically relevant temperatures and gas pressures.
Temperature dependence of epitaxial graphene formation on SiC(0001).
The formation of epitaxial graphene on SiC(0001) surfaces is studied using atomic force microscopy, Auger electron spectroscopy, electron diffraction, Raman spectroscopy, and electrical measurements. Starting from hydrogen-annealed surfaces, graphene formation by vacuum annealing is observed to begin at about 1150 C, with the overall step-terrace arrangement of the surface being preserved but with significant roughness (pit formation) on the terraces. At higher temperatures near 1250 C, the step morphology changes, with the terraces becoming more compact. At 1350 C and above, the surface morphology changes into relatively large flat terraces separated by step bunches. Features believed to arise from grain boundaries in the graphene are resolved on the terraces, as are fainter features attributed to atoms at the buried graphene/SiC interface.
Strained-Induced Morphological Reconstruction of RuO 2 (110) Thin-Film Electrocatalysts
Strain is a widely used strategy for electrocatalyst engineering. Overstraining, however, can lead to unintentional materials transformation. We investigate the impact of strain on the surface morphology of a rutile RuO 2 (110) film grown on a symmetry-matching rutile TiO 2 (110) substrate. When the film thickness exceeds 9 nm, the RuO 2 surface relaxes by forming step edges that expose the {011} plane. Density functional theory (DFT) calculation shows that the (011) facet is among the lower energy surfaces of rutile RuO 2 , suggesting that this formation incurs minimal energetic penalties. In situ atomic force microscopy (AFM) shows that the film maintains the (110) structure of the terrace during electrochemistry. Inductively coupled plasma–mass spectrometry (ICP-MS) further reveals the insensitivity of the Ru dissolution to strain. Here, our findings show a strain-relieving pathway via surface reconstruction in RuO 2 (110) and provide an example of a strain-relieving mechanism that does not affect dissolution.
Sapphire evolution of the vicinal (0001) sapphire surface upon annealing in air
The evolution of a terrace-step nanostructure (TSN) on the sapphire (0001) surface misoriented by an angle of 0.1° with respect to the (101̄0) plane was observed by atomic force microscopy (AFM) at temperatures from 1273 to 1673 K. It was established that, with an increase in the annealing temperature to 1373 K, the step height attains 0.44 nm at a distance of 220 nm between steps; i.e., heating by 100 K doubles these parameters. In this case, the relief periodicity is retained. Rapid cooling of the substrate to 973 K leads to partial freezing of the surface structure, which makes it possible to observe the transition from one TSN to another. It was established that two steps coalescence upon annealing to 1373 K toward the (101̄0) plane, which has the lowest rigidity and, consequently, the lowest atomic density. The coalescence of two steps at a specified temperature is completed at a sufficiently large distance between the steps, at which their interaction energy is negligible. Upon further annealing of the samples above 1373 K, the steps overgrow to 1 nm; however, their periodicity is broken in this case.
Origins of electronic bands in the antiferromagnetic topological insulator MnBi 2 Te 4
Despite the rapid progress in understanding the first intrinsic magnetic topological insulator MnBi 2 Te 4 , its electronic structure remains a topic under debates. In this work, we perform a thorough spectroscopic investigation into the electronic structure of MnBi 2 Te 4 via laser-based angle-resolved photoemission spectroscopy. Through quantitative analysis, we estimate an upper bound of 3 meV for the gap size of the topological surface state. Furthermore, our circular dichroism measurements reveal band chiralities for both the topological surface state and quasi-2D bands, which can be well reproduced in a band hybridization model. A numerical simulation of energy-momentum dispersions based on a four-band model with an additional step potential near the surface provides a promising explanation for the origin of the quasi-2D bands. Our study represents a solid step forward in reconciling the existing controversies in the electronic structure of MnBi 2 Te 4 , and provides an important framework to understand the electronic structures of other relevant topological materials MnBi 2n Te 3n+1 .
Keck Segment Surface Artifacts: Impacts on Segment Phasing and Image Quality
We show that the segments of the Keck telescopes su er from small but signi cant surface artifacts that limit segment phasing accuracy. Both the segment surface artifacts themselves and the limits they place on segment phasing have important implications for adaptive optics, high contrast imaging, and seeing limited observations. These surface artifacts are likely by-products of the segment polishing, most likely the Ion Beam Figuring (IBF) process that constitutes the nal step of the segment surface guring. The surface artifacts di ract a signi cant amount of light out past 3.5 arcseconds and generate chromatic e ects that limit segment phasing accuracy. We present on-sky measurements of the di racted intensity. Segment surface roughness measurements are also presented, which show that surface roughness is not the source of the problem. These results have direct relevance to segment manufacturing for the Thirty Meter Telescope (TMT) and other segmented mirror telescopes.
Luminescent systems based on the isolation of conjugated PI systems and edge charge compensation with polar molecules on a charged nanostructured surface
A photoluminescent or electroluminescent system and method of making a non-luminescent nanostructured material into such a luminescent system is presented. The method of preparing the luminescent system, generally, comprises the steps of modifying the surface of a nanostructured material to create isolated regions to act as luminescent centers and to create a charge imbalance on the surface; applying more than one polar molecule to the charged surface of the nanostructured material; and orienting the polar molecules to compensate for the charge imbalance on the surface of the nanostructured material. The compensation of the surface charge imbalance by the polar molecules allows the isolated regions to exhibit luminescence.
Role of Surface Hydroxyls and Lattice Oxygen in Governing Selectivity and Restructuring During Acetic Acid Conversion on Fe 3 O 4 (001)
Understanding the reactivity of carboxylic acids on metal oxide surfaces is critical for elucidating ketonization mechanisms relevant to biomass upgrading. Here, we investigate the adsorption and thermal decomposition of acetic acid (CH 3 COOH) on Fe 3 O 4 (001) using scanning tunneling microscopy (STM), temperature-programmed reaction spectroscopy (TPRS), and X-ray photoelectron spectroscopy (XPS). At room temperature, acetic acid adsorbs dissociatively to form ordered bidentate acetate (CH 3 COO) overlayer that lifts the (√2 × √2)R 45° surface reconstruction. TPRS reveals ketene (CH 2 CO) as the dominant product, along with CO, CO 2 , and H 2 O, the latter evolving via a Mars–van Krevelen (MvK) mechanism. Isotopic labeling shows preferential CO 2 formation from the carboxyl carbon and a more balanced CO/CO 2 ratio from the methyl carbon, suggesting distinct oxidation pathways. STM imaging reveals embedded acetate intermediates filling surface oxygen vacancies created in MvK steps. Upon product formation completion (~700 K), extensive surface etching is observed, with pits elongated along the octahedral Fe rows. Approximately 20% of the surface oxygen is removed, consistent with vacancy formation stoichiometry inferred from product distributions. These findings demonstrate that carboxylate-induced restructuring of Fe 3 O 4 (001) involves both surface healing and reduction processes, offering mechanistic insights relevant to ketonization and broader carboxylic acid chemistry on metal oxides.
Window defect planar mapping technique
A method of planar mapping defects in a window having an edge surface and a planar surface. The method is comprised of steps for mounting the window on a support surface. Then a light sensitive paper is placed adjacent to the window surface. A light source is positioned adjacent to the window edge. The window is then illuminated with the source of light for a predetermined interval of time. Defects on the surface of the glass, as well as in the interior of the glass are detected by analyzing the developed light sensitive paper. The light source must be in the form of optical fibers or a light tube whose light transmitting ends are placed near the edge surface of the window.
Lunar Vehicle Active Charge Control System (LVACCS)+
The Lunar Vehicle Active Charge Control System (LVACCS) is an instrument in development that will measure the electrical potential of a spacecraft or rover under both positive and negative charge conditions, actively discharge negative charge, and charge the vehicle to a safe positive potential. All surfaces immersed in a plasma charge to non-zero potentials. In very low-density plasma (< 100 cm^-3), space vehicle charging can interfere with plasma probe measurements, degrade avionics performance, or cause a total system failure. LVACCS provides real-time in-situ space situational awareness that overcome these challenges in a small package. LVACCS has been awarded a NASA PICASSO grant to bring the instrument to technology readiness level 5. LVACCS consists of two main components: a collimated photoelectron gun (CPEG) and a Spacecraft Charge Detector (SCD).Monitoring charge build up on the lunar surface isa critical first step to understand hazards for crew, rovers, and instrumentation operating there.The LVACCS instrument will be able to fill in this gap providing robust lunar surface potential measurements and active charge dissipation.
The Land Surface in Current and Planned MERRA Reanalysis Products
Current global atmospheric reanalysis products such as the European Centre for Medium-Range Weather Forecasts Reanalysis version 5 (ERA5), the NASA Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2), and the Japanese Reanalysis for Three Quarters of a Century (JRA-3Q) provide estimates of land surface states and fluxes, including soil moisture, soil temperature, snow mass, latent and sensible heat fluxes, and runoff, that are widely used in research and applications. These land surface estimates are based on land surface process models and, depending on the reanalysis product, on precipitation observations or the assimilation of land surface observations of soil moisture, soil temperature, snow conditions, and screen-level air temperature and humidity from satellite observations and in situ measurements. In this presentation, we review the land surface modeling and data assimilation components of the suite of current and planned MERRA reanalysis products. In addition to MERRA-2, we will discuss the latest NASA reanalysis, MERRA for the 21st century (M21C), which is currently under production, as well as the development and planning of the next version of the MERRA reanalysis, tentatively labeled MERRA-3. In MERRA-2, observations-based precipitation data products are used to correct the precipitation falling on the land surface. Outside of the high-latitudes and Africa, the daily, 0.5-degree, gauge-based Climate Prediction Center (CPC) Unified (CPCU) product is used. In Africa, the pentad, 2.5-degree, satellite- and gauge-based CPC Merged Analysis of Precipitation (CMAP) product is used. Poleward of 62.5 degrees latitude, the land surface sees the precipitation generated by the atmospheric model in the cycling data assimilation system. This configuration provides improved soil moisture estimates compared to those of the original (version 1) MERRA estimates, which did not benefit from the use of precipitation observations. Moreover, the use of precipitation observations facilitates a seamless spin-up of the land surface initial conditions across the MERRA-2 production streams. The use of a gauge-only precipitation product in MERRA-2 across much of the globe, however, adversely impacts the quality of the MERRA-2 land surface estimates in regions with poor gauge coverage, including most of South America and Australia. Therefore, the forthcoming M21C reanalysis uses satellite- and gauge-based precipitation from the Integrated Multi-satellitE Retrievals for the Global Precipitation Measurement Mission (IMERG). This change results in significant improvements in the quality of the M21C soil moisture estimates in the Southern Hemisphere compared to those from MERRA-2. Planning for MERRA-3 focuses on the assimilation of soil moisture observations from the Soil Moisture Active Passive (SMAP) mission and the Advanced Scatterometer (ASCAT), along with snow cover area fraction observations from the Moderate Resolution Imaging Spectroradiometer (MODIS) to further improve the quality of the land surface estimates from the reanalysis. As a first step towards the assimilation of land surface observations in MERRA-3, the offline (land-only) M21C-Land reanalysis is currently under development as a supplemental M21C product that includes the assimilation of SMAP, ASCAT, and MODIS observations. Preliminary results from M21C and M21C-Land will be discussed in the context of MERRA-2 and plans for MERRA-3.