Search NASA⌕ Search

SEARCH · Search NASA

Results for “synthesis and processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Synthesis of multifilament silicon carbide fibers by chemical vapor deposition

A process for development of clean silicon carbide fiber with a small diameter and high reliability is presented. An experimental evaluation of operating conditions for SiC fibers of good mechanical properties and devising an efficient technique which will prevent welding together of individual filaments are discussed. The thermodynamic analysis of a different precursor system was analyzed vigorously. Thermodynamically optimum conditions for stoichiometric SiC deposit were obtained.

Revankar, Vithal↗
NASA NTRS2014

Processing and Characterization of Carbon Nanotube Composites

Recent advances in the synthesis of large-scale quantities of carbon nanotubes (CNT) have provided the opportunity to study the mechanical properties of polymer matrix composites using these novel materials as reinforcement. Nanocomp Technologies, Inc. currently supplies large sheets with dimensions up to 122 cm x 244 cm containing both single-wall and few-wall CNTs. The tubes are approximately 1 mm in length with diameters ranging from 8 to 12 nm. In the present study being conducted at NASA Langley Research Center (LaRC), single and multiple layers of CNT sheets were infused or coated with various polymer solutions that included commercial toughened-epoxies and bismaleimides, as well as a LaRC developed polyimide. The resulting CNT composites were tested in tension using a modified version of ASTM D882-12 to determine their strength and modulus values. The effects of solvent treatment and mechanical elongation/alignment of the CNT sheets on the tensile performance of the composite were determined. Thin composites (around 50 wt% CNT) fabricated from acetone condensed and elongated CNT sheets with either a BMI or polyimide resin solution exhibited specific tensile moduli approaching that of toughened epoxy/ IM7 carbon fiber unidirectional composites.

Can, Roberto J.↗
DOE OSTI2025

One-step atmospheric microplasma synthesis of an NMC-type lithium-ion battery cathode

The manufacture of battery cathode materials is the most energy-intensive step in the production of commercial lithium-ion batteries; specifically, the synthesis of the widely used transition metal oxide cathodes can require tens of hours at temperatures exceeding 700 °C. Attempts to limit the reaction time and energy required to form crystalline cathode materials often still include a heating or calcination step. This communication aims to highlight a nascent yet novel synthesis route: a one-step atmospheric microplasma process for synthesizing cathode particles in less than one second. The hollow-tube reactor employed produces crystalline particles measuring 0.1–3 μm in diameter, displays narrow XRD peaks corresponding to the 003, 104, and 101 planes, and exhibits anodic redox behavior at 3.75 V vs. lithium—characteristic of transition-metal oxide cathode materials—all without requiring an additional calcination step.

25 ENERGY STORAGE↗
NASA NTRS2005

Synthesis of Virtual Environments for Aircraft Community Noise Impact Studies

A new capability has been developed for the creation of virtual environments for the study of aircraft community noise. It is applicable for use with both recorded and synthesized aircraft noise. When using synthesized noise, a three-stage process is adopted involving non-real-time prediction and synthesis stages followed by a real-time rendering stage. Included in the prediction-based source noise synthesis are temporal variations associated with changes in operational state, and low frequency fluctuations that are present under all operating conditions. Included in the rendering stage are the effects of spreading loss, absolute delay, atmospheric absorption, ground reflections, and binaural filtering. Results of prediction, synthesis and rendering stages are presented.

Rizzi, Stephen A.↗
DOE OSTI2024

A Semi‐Automated, High‐Throughput Approach for the Synthesis and Identification of Highly Photo‐Cytotoxic Iridium Complexes

Abstract The discovery of new compounds with pharmacological properties is usually a lengthy, laborious and expensive process. Thus, there is increasing interest in developing workflows that allow for the rapid synthesis and evaluation of libraries of compounds with the aim of identifying leads for further drug development. Herein, we apply combinatorial synthesis to build a library of 90 iridium(III) complexes (81 of which are new) over two synthesise‐and‐test cycles, with the aim of identifying potential agents for photodynamic therapy. We demonstrate the power of this approach by identifying highly active complexes that are well‐tolerated in the dark but display very low nM phototoxicity against cancer cells. To build a detailed structure–activity relationship for this class of compounds we have used density functional theory (DFT) calculations to determine some key electronic parameters and study correlations with the experimental data. Finally, we present an optimised semi‐automated synthesise‐and‐test protocol to obtain multiplex data within 72 hours.

Kench, Timothy↗
DOE OSTI2024

A Semi‐Automated, High‐Throughput Approach for the Synthesis and Identification of Highly Photo‐Cytotoxic Iridium Complexes

Abstract The discovery of new compounds with pharmacological properties is usually a lengthy, laborious and expensive process. Thus, there is increasing interest in developing workflows that allow for the rapid synthesis and evaluation of libraries of compounds with the aim of identifying leads for further drug development. Herein, we apply combinatorial synthesis to build a library of 90 iridium(III) complexes (81 of which are new) over two synthesise‐and‐test cycles, with the aim of identifying potential agents for photodynamic therapy. We demonstrate the power of this approach by identifying highly active complexes that are well‐tolerated in the dark but display very low nM phototoxicity against cancer cells. To build a detailed structure–activity relationship for this class of compounds we have used density functional theory (DFT) calculations to determine some key electronic parameters and study correlations with the experimental data. Finally, we present an optimised semi‐automated synthesise‐and‐test protocol to obtain multiplex data within 72 hours.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1971

Chemically regenerated foods.

The raw materials for the synthesis of food for the crew of a spacecraft would be the major metabolic products carbon dioxide and water. Synthetic processes could develop carbohydrates, fats, or proteins. The one potential method of sugar synthesis which has received most attention makes use of the formose reaction. Various aspects of this method are discussed, giving attention also to the nutritional qualities of formose sugars. Questions regarding the utilization of glycerol, propylene glycol, and ethanol as dietary components are also examined. The possibility is considered to use the triglyceride triacetin as food. The use of free amino acids does not appear promising. Methods are described for the synthesis of formaldehyde from carbon dioxide and the synthesis of glycerol from formaldehyde.

Shapira, J.↗
DOE OSTI2025

From Nonclassical to Classical: Crystallization Seeds Reshape Nucleation Mechanisms

Crystalline seeds are widely employed in crystallization to accelerate nucleation and control product polymorphs; yet, their impact on nucleation mechanisms remains poorly understood. While homogeneous nucleation of crystals from solution often proceeds through nonclassical pathways involving amorphous intermediates, it is unclear how seeds that promote heterogeneous nucleation reshape these mechanisms and govern polymorph selection. Here, in this study, we provide the first direct evidence that crystalline seeds can bypass the need for amorphous intermediates as nucleation sites, converting nonclassical nucleation mechanisms into classical, monomer-by-monomer crystallization pathways. Using molecular dynamics simulations of zeolite synthesis, we uncover a complex reaction network of competing nucleation processes mediated by intermediate interfacial polymorphs. The interplay between thermodynamic stability and kinetic favorability of these interfacial polymorphs dictates nucleation outcomes, creating a dynamic balance between the interfacial polymorph stability and crystallization rates. Furthermore, we show that the synthesis environment-whether monomers or aggregates serve as reactants-profoundly impacts these pathways. At moderate supersaturation, seeds eliminate amorphous intermediates and promote classical nucleation, whereas high supersaturation or aggregate-based reactants favor nonclassical pathways, even in the presence of seeds. These findings establish a general framework for understanding how seeds govern crystallization mechanisms, with broad implications for controlling nucleation kinetics, polymorph selection, and material properties. While focused on zeolites, this work reveals insights that may be applicable to biominerals, pharmaceuticals, functional materials, and catalysts, providing a basis for engineering crystallization pathways in diverse applications.

Chu-Jon, Carlos [Univ. of Utah, Salt Lake City, UT↗
NASA NTRS1994

Containerless liquid-phase processing of ceramic materials

Containerless melting and solidification provides a powerful tool for investigation and synthesis of ceramic and glass materials. The work described in this article explored and extended the limits of ground-based experimentation by using aero-acoustic and aerodynamic levitation in combination with laser beam heating and melting to investigate ceramic and glass processing. Results of liquid-phase processing experiments on calcia-gallia and calcia-gallia-silica glass-forming mixtures, aluminum oxide, and ceramic superconductors are summarized. The work is discussed in the context of low gravity experimental and materials synthesis requirements and opportunities.

Weber, J. K. R.↗
DOE OSTI2025

Using Electrochemistry to Benchmark, Understand, and Develop Noble Metal Nanoparticle Syntheses

The complex chemical nature of metal nanoparticle synthesis presents obstacles for the mechanistic understanding of nanoparticle growth and predictive synthesis design, despite significant progress in this area. Real-time characterization of the chemical processes that take place throughout nanoparticle growth will enable progress toward addressing outstanding challenges in metal nanoparticle synthesis, such as mitigating synthetic reproducibility issues, defining chemical mechanisms that direct nanoparticle growth, and designing synthetic conditions for previously unachievable combinations of nanoparticle shape and composition. In this Perspective, we present open-circuit potential (OCP) measurements as an in situ, real-time method for characterizing chemical changes during nanoparticle growth and discuss the method’s strengths in comparison to and in combination with other characterization techniques. We propose the use of OCP measurements as benchmarks for troubleshooting irreproducibility and streamlining synthetic optimization. Finally, we explore possibilities for using the increased parameter space accessible by electrodeposition to accelerate the development of shape-selective nanoparticle syntheses.

benchmarking↗
DOE OSTI2026

Evaluation of Iron‐Phosphate Glass–Ceramic Waste Form for Electrorefiner Salt Waste Simulant Dechlorinated With Phosphoric Acid

The importance of glass and glass–ceramic nuclear waste forms has been reaffirmed in recent years by the growing interest in nuclear power as a reliable energy source. Determination of processing methods for the disposal of halide-containing wastes will be essential for the advancement of nuclear technologies such as non-aqueous fuel reprocessing. Phosphate-based dechlorination and subsequent vitrification of radioactive salt waste into an iron-phosphate waste form have been identified as a potential processing scheme for electrochemical processing waste. The impact of H 3 PO 4 -based dechlorination of complex salt mixtures on the vitrification process and structure of the final iron-phosphate waste form has not yet been investigated. In this work, iron-phosphate glass–ceramics were made from simulant salt waste (48LiCl–33KCl–19NaCl mol%) dechlorinated with the H3PO4-based method. The glass-forming region was compared to that of traditionally prepared Na 2 O–Fe 2 O 3 –P 2 O 5 systems. For a candidate glass-forming composition, the processing scheme presented here was determined to favor Fe 3+ species. The O/P molar ratio was consistent for the candidate composition when dechlorinated at 400°C and 600°C in air and argon environments, indicating glass network connectivity was maintained despite variations in processing parameters. The results presented here validate processing schemes requiring iron-phosphate waste form synthesis following H 3 PO 4 -based dechlorination.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

MgO Nanostructures on Cu(111): Understanding Size- and Morphology-Dependent CO 2 Binding and Hydrogenation

To design and optimize cost-effective technologies for the capture, utilization, and storage of carbon dioxide (CO 2 ), we need a fundamental knowledge and control of chemical interactions associated with the capture and conversion of the molecule into high-value chemicals, minerals, and all kinds of materials. Bulk magnesium oxide (MgO) is frequently used for the trapping and storage of CO 2 by generation of magnesium carbonates. In this study, the growth and reactivity of MgO nanostructures on a Cu 2 O/Cu(111) substrate were investigated using scanning tunneling microscopy (STM) and synchrotron-based ambient-pressure X-ray photoelectron spectroscopy (AP-XPS). For extremely small concentrations of Mg (~ 0.01 monolayer (ML)), a well-ordered film of copper oxide with small clusters (0.2-0.5 nm in width, 0.4-0.6 Å in height) of embedded MgO was seen. At a coverage of 0.1 ML, MgO nanoparticles with a width of 0.4 to 1 nm and a height of ~ 1.5 Å were randomly distributed on the copper oxide. Further, random distribution was also observed when the MgO coverage was raised to 0.25 ML, with the width of the MgO particles increasing to 2-2.5 nm and the height reaching 2 Å. These oxide nanostructures displayed a high reactivity towards CO 2 and H 2 that is not seen for bulk MgO. Dissociation of H 2 was observed at room temperature with reaction of the H adatoms with CuO x and C-containing groups. On the small MgO nanostructures (< 1 nm in width), instead of plain carbonate formation, there was dissociation of CO 2 into CO and C species, opening reaction channels for the conversion of this harmful molecule into oxygenates and light alkanes.

03 NATURAL GAS↗
DOE OSTI2025

Bacteria export alarmone synthetases that produce (p)ppApp and (p)ppGpp

Guanosine penta- and tetraphosphate [(p)ppGpp] and their adenosine analogs [(p)ppApp] are bacterial second messengers known as alarmones. Members of the RelA-SpoT homolog (RSH) family synthesize (p)ppGpp to mediate the stringent response during nutrient starvation, whereas (p)ppApp synthetases have been identified as bactericidal toxins in diverse contexts including type VI secretion systems, toxin-antitoxin modules, and phages. Although alarmone synthesis has traditionally been viewed as a cytoplasmic process, early studies in Streptomyces suggested the existence of secreted alarmone synthetases. Here, we identify SaEAS, an exported alarmone synthetase (EAS) from Streptomyces albidoflavus, as the long-mysterious source of extracellular alarmone synthetase activity in Streptomyces. SaEAS produces both (p)ppGpp and (p)ppApp at rates exceeding 100,000 molecules per minute and has kinetic properties adapted to low substrate environments. A broader bioinformatic survey reveals ~600 EASs linked to a range of specialized bacterial secretion systems. Characterization of two additional EASs, VpEAS from Vibrio parahaemolyticus and AaEAS from Amycolatopsis azurea, shows that both produce (p)ppGpp exclusively and inhibit bacterial growth when localized to the cytoplasm. These findings challenge the longstanding view of (p)ppGpp as strictly pro-survival and unveil a diverse family of secreted RSH enzymes with potential roles in interbacterial antagonism and environmental signaling.

Ahmad, Shehryar↗
DOE OSTI2026

Polar primary aerosols across the ocean-sea ice-snow-atmosphere interface: From sources to impacts

Primary aerosols play a critical role in polar climate systems, influencing cloud formation, precipitation, radiative balance, and surface energy budgets. This paper provides a comprehensive synthesis of primary aerosol sources, transformation and removal processes, and broader atmospheric impacts in polar regions, emphasizing their links to ocean and sea ice biogeochemistry. These aerosols (including sea salt, primary organic aerosol, and primary biological aerosol particles) originate from marine and cryospheric environments and are emitted through physical processes, such as wave breaking, bubble bursting, and blowing snow. Emission sources include seawater, sea ice, snow, and freshwater from river discharge and glacial runoff. Once airborne, these particles can serve as a chemical reservoir, influencing atmospheric composition and reactivity, and as seeds for cloud droplet and ice crystal formation, influencing cloud microphysics and polar climate. Despite their importance, many of the processes governing primary aerosol emissions and transformations remain poorly constrained. The most pressing knowledge gaps pertain to emission processes, limited spatiotemporal observational coverage, instrumentation constraints, parameterization development, and the integration of interdisciplinary expertise. To improve our understanding of primary aerosol drivers and their response to climate, future research efforts should prioritize strategically coordinated and cross-disciplinary process studies, advancements in measurement technologies and coverage, and close collaboration between modelers and observational scientists to inform and refine model parameterizations. As polar regions continue to undergo profound changes marked by increased precipitation, reduced sea and land ice, freshening oceans, and shifting ecosystem dynamics, characterizing present-day primary aerosol populations is vital. Improved understanding will be essential for anticipating future changes in aerosol-radiation and aerosol-cloud interactions and their implications for polar and global climate systems.

Aerosol-cloud↗
NASA NTRS1971

Improvement of chemical vapor deposition process for production of large diameter carbon base monofilaments

Research was conducted to develop large diameter carbon monofilament, containing 25 to 35 mole % element boron, in the 2.0 to 10.0 mil diameter range using the chemical vapor deposition process. The objective of the program was to gain an understanding of the critical process variables and their effect on fiber properties. Synthesis equipment was modified to allow these variables to be studied. Improved control of synthesis variables permitted reduction in scatter of properties of the monofilaments. Monofilaments have been synthesized in the 3.0 to nearly 6.0 mil diameter range having measured values up to 552,000 psi for ultimate tensile strength and up to 30 million psi for elastic modulus.

Hough, R. L.↗
NASA NTRS1974

Simulation of lunar carbon chemistry. I - Solar wind contribution

Simulation experiments were conducted to identify the role of solar and lunar winds in the evolution of lunar carbon chemistry. Major conclusions are that (1) implantation of solar wind C, D, and N ions in silicates synthesizes small molecules that can be released into vacuum either by ion sputtering or by heating; (2) this synthesis is highly specific when compared to other processes accounting for the formation of molecules in the solar nebula or in interstellar space; (3) the carbon injected by the solar wind in the crystalline component of mature soils should reach a saturation concentration of about 200 ppm; and (4) the carbon chemistry of the crystalline component of mature soils is dominated by solar wind implantation effects.

Bibring, J. P.↗
NASA NTRS1984

The Pilot Land Data System: Report of the Program Planning Workshops

An advisory report to be used by NASA in developing a program plan for a Pilot Land Data System (PLDS) was developed. The purpose of the PLDS is to improve the ability of NASA and NASA sponsored researchers to conduct land-related research. The goal of the planning workshops was to provide and coordinate planning and concept development between the land related science and computer science disciplines, to discuss the architecture of the PLDs, requirements for information science technology, and system evaluation. The findings and recommendations of the Working Group are presented. The pilot program establishes a limited scale distributed information system to explore scientific, technical, and management approaches to satisfying the needs of the land science community. The PLDS paves the way for a land data system to improve data access, processing, transfer, and analysis, which land sciences information synthesis occurs on a scale not previously permitted because of limits to data assembly and access.

Source record↗