Search NASA⌕ Search

SEARCH · Search NASA

Results for “wake effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Wind tunnel measurements of three-dimensional wakes of buildings

Measurements relevant to the effect of buildings on the low level atmospheric boundary layer are presented. A wind tunnel experiment was undertaken to determine the nature of the flow downstream from a gap between two transversely aligned, equal sized models of rectangular cross section. These building models were immersed in an equilibrium turbulent boundary layer which was developed on a smooth floor in a zero longitudinal pressure gradient. Measurements with an inclined (45 degree) hot-wire were made at key positions downstream of models arranged with a large, small, and no gap between them. Hot-wire theory is presented which enables computation of the three mean velocity components, U, V and W, as well as Reynolds stresses. These measurements permit understanding of the character of the wake downstream of laterally spaced buildings. Surface streamline patterns obtained by the oil film method were used to delineate the separation region to the rear of the buildings for a variety of spacings.

Logan, E., Jr.↗
NASA NTRS1993

Attenuation of empennage buffet response through active control of damping using piezoelectric material

Dynamic response and damping data obtained from buffet studies conducted in a low-speed wind tunnel by using a simple, rigid model attached to spring supports are presented. The two parallel leaf spring supports provided a means for the model to respond in a vertical translation mode, thus simulating response in an elastic first bending mode. Wake-induced buffeting flow was created by placing an airfoil upstream of the model of that the wake of the airfoil impinged on the model. Model response was sensed by a strain gage mounted on one of the springs. The output signal from the strain gage was fed back through a control law implemented on a desktop computer. The processed signals were used to 'actuate' a piezoelectric bending actuator bonded to the other spring in such a way as to add damping as the model responded. The results of this 'proof-of-concept' study show that the piezoelectric actuator was effective in attenuating the wake-induced buffet response over the range of parameters investigated.

Heeg, Jennifer↗
NASA NTRS1984

A study of the aerodynamic interaction between a main rotor and a fuselage

The wake of a helicopter rotor can have a significant effect on a fuselage. Results from a recent wind-tunnel investigation show that certain fuselage characteristics, normalized by rotor thrust, scale proportionally to a rotor-wake-induced velocity parameter. Effects on the body of changes in velocity, thrust, tip-path-plane angle of attack, and rotor/body position are discussed. These results show that the rotor can have a favorable or unfavorable influence on the body, depending upon the operating condition.

Smith, C. A.↗
DOE OSTI2023

Predicting wind farm operations with machine learning and the P2D‐RANS model: A case study for an AWAKEN site

Abstract The power performance and the wind velocity field of an onshore wind farm are predicted with machine learning models and the pseudo‐2D RANS model, then assessed against SCADA data. The wind farm under investigation is one of the sites involved with the American WAKE experimeNt (AWAKEN). The performed simulations enable predictions of the power capture at the farm and turbine levels while providing insights into the effects on power capture associated with wake interactions that operating upstream turbines induce, as well as the variability caused by atmospheric stability. The machine learning models show improved accuracy compared to the pseudo‐2D RANS model in the predictions of turbine power capture and farm power capture with roughly half the normalized error. The machine learning models also entail lower computational costs upon training. Further, the machine learning models provide predictions of the wind turbulence intensity at the turbine level for different wind and atmospheric conditions with very good accuracy, which is difficult to achieve through RANS modeling. Additionally, farm‐to‐farm interactions are noted, with adverse impacts on power predictions from both models.

17 WIND ENERGY↗
NASA NTRS1976

Vortex interactions in multiple vortex wakes behind aircraft

A flow visualization technique has been developed which allows the nature of lift-generated wakes behind aircraft models to be investigated. Several different configurations of a 0.61-m span model of a Boeing 747-type transport aircraft were tested to allow observation of typical vortex interactions and merging in multiple vortex wakes. The vortices were identified by emitting tracer dyes from selected locations on the model. Wing span loading and model attitude were found to effect both vortex motions within the wake and resulting far-field wake velocity. Landing gear deployment caused a far-field reformation of vorticity behind a model configuration which dissipated concentrated vorticity in the near-field wake. A modified landing configuration was developed which appeared to significantly alleviate the concentrated wake vorticity.

Ciffone, D. L.↗
NASA NTRS1976

The effect of vertical distortion in the modeling of sedimentation phenomena - Martian crater wake streaks

Theoretical mass flow rate and the particle trajectory equations of motion of granular material in saltation are used to correlate experimental data for the rate of erosion in the wake regions of wind-tunnel-model Martian craters. Vertical geometric distortion is inherent in the simulation because of the equivalent roughness height characteristic of a turbulent boundary layer, which is affected by material in saltation. It is thus necessary to distort topographic model geometry in the vertical direction. A systematic similitude which is based on erosion rate and equivalent roughness in saltation is shown to correlate time-dependent model data as long as the model Reynolds number is higher than a critical value.

Iversen, J. D.↗
NASA NTRS1994

The Effect of Two-Dimensional Forcing on Self-Similar Turbulent Plane Wakes

Three direct numerical simulations of time-evolving turbulent plane wakes with velocity deficit Reynolds numbers of about 2,000 have been simulated using a spectral numerical method with up to 600 x 260 x 160 modes. The initial conditions for the simulations are generated from direct numerical simulations of a turbulent boundary layer (momentum thickness Reynolds number of 670), and varying amounts of additional two- dimensional, forcing. In order to preserve the self-similar flow evolution, the forcing is implemented by multiplying all the two-dimensional modes in the initial condition by a constant factor. In the "natural" case no additional forcing is used; in the "forced" and "heavily forced" cases this factor is 5 and 20, respectively. The wake spreading rate Is increased by factors of 1.7 and 7.1 for the two forced cases. The Reynolds stresses are also increased by a similar or even larger factor. These results indicate that the plane wake is much more sensitive to initial forcing than the plane mixing layer. As in the plane mixing layer, two-dimensional forcing promotes more organized large-scale vortical flow structures and these structures axe sometimes separated by "braid regions" containing streamwise "rib" vortices, unlike in the unforced wake.

Rogers, M. M.↗
NASA NTRS2017

Navier-Stokes Simulation of UH-60A Rotor/Wake Interaction Using Adaptive Mesh Refinement

High-resolution simulations of rotor/vortex-wake interaction for a UH60-A rotor under BVI and dynamic stallconditions were carried out with the OVERFLOW Navier-Stokes code.a. The normal force and pitching moment variation with azimuth angle were in good overall agreementwith flight-test data, similar to other CFD results reported in the literature.b. The wake-grid resolution did not have a significant effect on the rotor-blade airloads. This surprisingresult indicates that a wake grid spacing of (Delta)S=10% ctip is sufficient for engineering airloads predictionfor hover and forward flight. This assumes high-resolution body grids, high-order spatial accuracy, anda hybrid RANS/DDES turbulence model.c. Three-dimensional dynamic stall was found to occur due the presence of blade-tip vortices passing overa rotor blade on the retreating side. This changed the local airfoil angle of attack, causing stall, unlikethe 2D perspective of pure pitch oscillation of the local airfoil section.

CFD Validation↗
NASA NTRS1962

Linearized Theory of Wind-tunnel Jet-boundary Corrections and Ground Effect for VTOL-STOL Aircraft

A linearized theory is developed to obtain interference factors for wind tunnels and ground effect. The calculated results, presented in tabular form in NASA Technical Notes D-933, D-934, D-935, and D-936, indicate that the degree to which the wake is deflected downward has a primary effect on the magnitude of the interference. When the wake is undeflected the corrections are essentially the same as those of classical theory. When the wake is deflected severely downward, the corrections are primarily determined by the floor of the wind tunnel. Under these conditions, the corrections are, in general, much larger than those given by previously available results. Because of deformations at the lower boundary of the jet, the corrections for an open wind tunnel are uncertain. Testing at low speeds and high lift coefficients in open wind tunnels, therefore, is not recommended. Although the theory is developed expressly for single-element, vanishingly small models, methods, with sample calculations, are given for extending the results to multielement and finite span models. The theory is at least partially verified by available test data; however, complete verification would require a substantially more detailed experimental study.

V/STOL aircraft↗
NASA NTRS1997

Flow Quality and Boundary Layer Transition

The widely held view is that transition to turbulence in the Blasius boundary layer occurs via amplification and eventual nonlinear breakdown of initially small amplitude instabilities i.e. Tollmien-Schlichting (TS) waves. However this scenario is only observed for low amplitude free-stream turbulence levels, i.e. u/U < 0.1%. Bypass of linear TS instability mechanism occurs for higher EST levels, yet considerable differences exist between the few experiments carefully designed to assess the effect of EST on transition. The consensus is that EST leads to longitudinal streaks that form near the leading edge in the boundary layer . These streaks appeal to be regions of concentrated streamwise vorticity and they are often referred to as Klebanoff modes. The importance of mean flow free-stream nonuniformity (FSN) is not as widely appreciated as EST for characterizing wind tunnel flow quality. Here it is shown that, although the v like generated by a d=50micron wire located upstream of the contraction (Re(sub d)=6.6, x/d=45,000) is immeasurably small by the time it interacts with the leading edge in the test section, it is responsible for generation of a pair of weak streamwise vortices in the boundary layer downstream. The characteristics of these wake-induced vortices and their effect on TS waves are demonstrated. Small remnant FSN variations are also shown to exist downstream of a turbulence grid. The question arises Are the adverse effects introduced by the turbulence grid caused by FST or by small remnant FSN variations?

Watmuff, Jonathan H↗
NASA NTRS1985

Wind-tunnel evaluation of a 21-percent-scale powered model of a prototype advanced scout helicopter

An exploratory wind tunnel investigation of a 21 percent scale powered model of a prototype advanced scout helicopter was conducted in the Langley 4 by 7 Meter Tunnel. The investigation was conducted to define the overall aerodynamic characteristics of the Army Helicopter Improvement Program (AHIP), to determine the effects of the rotor on the aerodynamic characteristics and to evaluate the effect of a mast mounted sight on the aircraft stability characteristics. Tests covered a range of thrust coefficients, advance ratios, angles of attack and angles of sideslip and were run for both rotor on and rotor off configurations. Results of the investigation showed that the prototype configuration was longitudinally unstable with angle of attack for all configurations tested. The instability was due to unfavorable interference effects between the horizontal tail and the wake shed from the engine pylon and rotor hub, which caused a loss of horizontal tail effectiveness. The addition of the mast mounted sight had little effect on the stability of the model, but it caused an alteration in the rotor lift distribution that resulted in substantial interference drag for the sight.

Phelps, A. E., III↗
NASA NTRS1972

Exploratory flight investigation of aircraft response to the wing vortex wake generated by jet transport aircraft

The effect of intercepting wing tip vortices generated by large jet transports, including jumbo jets, over separation distances from 1 nautical mile to 15 nautical miles is evaluated on the basis of the response of a vortex probe airplane in the roil mode. The vortex probe test aircraft included a representative general aviation airplane, an executive jet, a fighter, and light and medium weight jet transports. The test conditions and airplane configurations were comparable to those normally used during takeoff, landing, or holding pattern operations. For flight safety the tests were performed at altitudes from 9500 feet to 12,500 feet. In addition to an evaluation of the probe airplane response, a flight test technique is suggested for determining minimum separation distance, using as variable the ratio of vortex-induced roll acceleration to maximum lateral control acceleration and the gross weight of the generating aircraft.

Andrews, W. H.↗
NASA NTRS1998

Low Speed Aerodynamics of the X-38 CRV

This project was performed in support of the engineering development of the NASA X-38 Crew Return Vehicle (CRV)system. Wind tunnel experiments were used to visualize various aerodynamic phenomena encountered by the CRV during the final stages of descent and landing. Scale models of the CRV were used to visualize vortex structures above and below the vehicle, and in its wake, and to quantify their trajectories. The effect of flaperon deflection on these structures was studied. The structure and dynamics of the CRV's wake during the drag parachute deployment stage were measured. Regions of high vorticity were identified using surveys conducted in several planes using a vortex meter. Periodic shedding of the vortex sheets from the sides of the CRV was observed using laser sheet videography as the CRV reached high angles of attack during the quasi-steady pitch-up prior to parafoil deployment. Using spectral analysis of hot-film anemometer data, the Strouhal number of these wake fluctuations was found to be 0.14 based on the model span. Phenomena encountered in flight test during parafoil operation were captured in scale-model tests, and a video photogrammetry technique was implemented to obtain parafoil surface shapes during flight in the tunnel. Forces on the parafoil were resolved using tension gages on individual lines. The temporal evolution of the phenomenon of leading edge collapse was captured. Laser velocimetry was used to demonstrate measurement of the porosity of the parafoil surface. From these measurements, several physical explanations have been developed for phenomena observed at various stages of the X-38 development program. Quantitative measurement capabilities have also been demonstrated for continued refinement of the aerodynamic technologies employed in the X-38 project. Detailed results from these studies are given in an AIAA Paper, two slide presentations, and other material which are given on a Web-based archival resource. This is the Digital Library of the Georgia Tech Experimental Aerodynamics Group.

Komerath, N. M.↗
DOE OSTI2026

The AWAKEN wind farm benchmark, Part 2: Modeling results

Accurately modeling wind farm performance in complex atmospheric flows remains a challenge. This paper presents the modeling results of the American WAKE experimeNt (AWAKEN) wind farm benchmark, a collaborative effort involving 16 research groups from academia and industry within the International Energy Agency Wind Technology Collaboration Programme Task 57. The study evaluates a diverse suite of simulation tools, ranging from fast-running engineering wake models to high-fidelity large-eddy simulations, against a diurnal case study observed during the AWAKEN campaign. The benchmark utilized a three-phase structure to progressively assess model performance as observational data availability increased. Initial blind predictions showed that higher-fidelity models did not uniformly outperform simpler simulation tools. A distinct spatial bias was observed where models struggled to resolve the interplay between a low-level jet, wakes, and terrain-induced flow acceleration. In subsequent phases, leveraging additional measurements for model improvement led to a reduction in mean absolute error across the model ensemble; however, this effect was most pronounced in engineering wake models, where targeted calibration reduced error by up to 40~\%. Overall, the study demonstrates that inflow characterization remains a primary prerequisite for accuracy, particularly for models relying on coarse forcing datasets. While the limited ability to resolve local terrain-flow interactions under single-day conditions represent a recognized constraint, the overall findings on wake modeling and real-world validation still provide valuable guidance for model application and for mitigating this limitation.

Bodini, Nicola↗
NASA NTRS1979

Hot plasma environment at Jupiter - Voyager 2 results

Preliminary results are reported from measurements made with the low-energy charged particle (LECP) instrument on Voyager 2 as it approached and traversed the Jovian magnetosphere. The primary objectives of the LECP instrument were to make measurements of the hot plasma (no less than about 20 keV and no less than about 28 keV for electrons and ions, respectively), to characterize the composition of the hot plasma and energetic-particle population, and to determine the particle flows and spatial distributions. In addition, the effects associated with the possible wake of Ganymede are discussed. Attention is given to inbound and outbound passes, along with Jovian plasma characteristics. The results suggest that the Jovian magnetosphere is confined by a plasma boundary rather than a conventional magnetopause. Inside the plasma boundary there exists a discontinuity at about 50-60 Jupiter radii, and the region inside this discontinuity is termed the 'inner plasmasphere'.

Krimigis, S. M.↗
NASA NTRS1984

Application of a full potential method for computation of three-dimensional supersonic flows

A nonlinear aerodynamic analysis technique based on the full potential equation in conservative form has been modified to permit treatment of supersonic flows with embedded subsonic regions (typically near the fuselage-canopy juncture and the wing leading edge). Solution procedures for the equations do not require any specific form of geometry or physical grid system. This results in the capability to analyze easily very complex geometries provided the posed problem lies within the isentropic restrictions of the full potential theory. Characteristic signal propagation theory is used to monitor the type dependent flow and a conservative switching scheme is employed to transition from the supersonic marching algorithm to a subsonic relaxation procedure and vice versa. An implicit approximate factorization scheme is used to solve the finite-difference equations. These modifications now permit analysis of fully three-dimensional flowfields including the interference effects due to lifting surface wakes. Improved grid generation capability allows analysis of complete complex aircraft geometries (fuselage, wing, tail, wing wake, and tail wake). Results are presented showing very good correlations with experimental surface pressure data and aerodynamic force data at both design and off-design operating points. Configurations examined include several waverider concepts, an arrow wing-body with wake, an advanced tactical fighter concept, and a fighter forebody-canard configuration.

Jones, K. M.↗
NASA NTRS1985

Transition in Turbines

The concept of a large disturbance bypass mechanism for the initiation of transition is reviewed and studied. This mechanism, or some manifestation thereof, is suspected to be at work in the boundary layers present in a turbine flow passage. Discussion is presented on four relevant subtopics: (1) the effect of upstream disturbances and wakes on transition; (2) transition prediction models, code development, and verification; (3) transition and turbulence measurement techniques; and (4) the hydrodynamic condition of low Reynolds number boundary layers.

Source record↗