Search NASA⌕ Search

SEARCH · Search NASA

Results for “wind data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 523 records · Page 29

Remote detection of ocean features in the Lesser Antilles using ERTS-1 data

The author has identified the following significant results. Photographic data received from the ERTS-1 satellite over the Lesser Antilles Islands shows distinct ocean features on the leeward side of each island. Attempts to relate these features to ocean eddy formations with the aid of ground truth data proved unsuccessful. However, analysis of surface and upper air wind data correlate extremely well with the size, shape, and downwind extent of the ocean features. Studies to date indicate strongly that these features result from horizontal differences in sea surface roughness due to the wind shadow effect of the islands. The results suggest that horizontal variations in the reflectance of the sea surface will make remote sensing of the ocean mixed layer more difficult than previously anticipated. The surface reflection seems to be large enough to mask the smaller variations in backscattered energy from the mixed layer. Efforts to limit the effect of surface reflectance by photographic differencing of two MSS bands were unsuccessful. A supplementary study to enhance the energy reflected from the mixed layer through numerical differencing of ERTS-1 digital data is planned.

Hanson, K. J.↗

Wind Characterization for the Assessment of Collision Risk During Flight Level Changes

A model of vertical wind gradient is presented based on National Oceanic and Atmospheric Administration (NOAA) wind data. The objective is to have an accurate representation of wind to be used in Collision Risk Models (CRM) of aircraft procedures. Depending on how an aircraft procedure is defined, wind and the different characteristics of the wind will have a more severe or less severe impact on distances between aircraft. For the In-Trail Procedure, the non-linearity of the vertical wind gradient has the greatest impact on longitudinal distance. The analysis in this paper extracts standard deviation, mean, maximum, and linearity characteristics from the NOAA data.

Carreno, Victor↗

The behavior of forecast error covariances for a Kalman filter in two dimensions

The behavior of forecast error covariances in a fairly realistic setting is demonstrated via a Kalman filter algorithm. It is used to assimilate simulated data from the existing radiosonde network, from the demonstration network of 31 Doppler wind profilers in the central U.S., and from hypothetical radiometers located at five of the profiler sites. Some theoretical justification of the hypothesis advanced by Phillips (1982), and the hypothesis is used to formulate the model error covariance matrix required by the Kalman filter. The results show that assimilating the profiler wind data leads to a large reduction of forecast/analysis error in heights as well as in winds, over the profiler region and also downstream, when compared with the results of assimilating the radiosonde data alone. The forecast error covariance matrices that the Kalman filter calculates to obtain this error reduction differ considerably from those prescribed by the optimal interpolation schemes that are employed for data assimilation at operational centers.

Cohn, Stephen E.↗

Sodar Data from Oyster Bay at Winyah Bay National Estuarine Research Reserve in South Carolina

The SecondWind Triton® is a SODAR (SOnic Detection and Ranging) sonic wind profiler (Triton® sodar) system capable of profiling the wind characteristics up to 200m above the instrument. SODAR systems transmit acoustic chirps into the atmosphere and measure the backscattered signal returned to the device. The primary source of acoustic scattering is variations in air temperature, which cause changes in the refractive index of sound. By measuring the Doppler-shifted frequency of these returned signals, the Triton® can calculate the wind’s speed and direction for the volume of air above the instrument, measured at ten fixed heights, known as station heights. The Triton® is specifically designed for the purpose of wind energy resource assessment as it can remotely capture wind data at heights above ground where wind turbine rotors operate. The measurements made include horizontal wind speed and direction, vertical wind speed, and turbulence. Other integrated sensors provide time and location via GPS, barometric pressure, humidity, and the tilt of the instrument. The study area is located east of Georgetown, South Carolina in North Inlet - Winyah Bay National Estuarine Research Reserve. The monitoring period for data in this report begins 5/14/2009 9:30:00 AM EST and ends 8/2/2010 11:40:00 AM EST.

17 WIND ENERGY↗

Wind Information Uplink to Aircraft Performing Interval Management Operations

Interval Management (IM) is an ADS-B-enabled suite of applications that use ground and flight deck capabilities and procedures designed to support the relative spacing of aircraft (Barmore et al., 2004, Murdoch et al. 2009, Barmore 2009, Swieringa et al. 2011; Weitz et al. 2012). Relative spacing refers to managing the position of one aircraft to a time or distance relative to another aircraft, as opposed to a static reference point such as a point over the ground or clock time. This results in improved inter-aircraft spacing precision and is expected to allow aircraft to be spaced closer to the applicable separation standard than current operations. Consequently, if the reduced spacing is used in scheduling, IM can reduce the time interval between the first and last aircraft in an overall arrival flow, resulting in increased throughput. Because IM relies on speed changes to achieve precise spacing, it can reduce costly, low-altitude, vectoring, which increases both efficiency and throughput in capacity-constrained airspace without negatively impacting controller workload and task complexity. This is expected to increase overall system efficiency. The Flight Deck Interval Management (FIM) equipment provides speeds to the flight crew that will deliver them to the achieve-by point at the controller-specified time, i.e., assigned spacing goal, after the target aircraft crosses the achieve-by point (Figure 1.1). Since the IM and target aircraft may not be on the same arrival procedure, the FIM equipment predicts the estimated times of arrival (ETA) for both the IM and target aircraft to the achieve-by point. This involves generating an approximate four-dimensional trajectory for each aircraft. The accuracy of the wind data used to generate those trajectories is critical to the success of the IM operation. There are two main forms of uncertainty in the wind information used by the FIM equipment. The first is the accuracy of the forecast modeling done by the weather provider. This is generally a global environmental prediction obtained from a weather model such as the Rapid Refresh (RAP) from the National Centers for Environmental Prediction (NCEP). The weather forecast data will have errors relative to the actual, or truth, winds that the aircraft will encounter. The second source of uncertainty is that only a small subset of the forecast data can be uplinked to the aircraft for use by the FIM equipment. This results in loss of additional information. The Federal Aviation Administration (FAA) and RTCA are currently developing standards for the communication of wind and atmospheric data to the aircraft for use in NextGen operations. This study examines the impact of various wind forecast sampling methods on IM performance metrics to inform the standards development.

Ahmad, Nashat N.↗

Reduction of Skylab 2 ground winds

A dampometer was designed and fabricated for measuring the amount of damping in the wind tunnel test model. The ground winds data reduction system (GWDRS) was taken to Langley Research Center in support of wind tunnel tests on the Skylab 2 program. Final data reduction of the test results was accomplished by the GWDRS.

Rolfes, M. J.↗

RANS simulations of neutral atmospheric boundary layer flow over complex terrain with comparisons to field measurements

Micro-scale Reynolds-averaged Navier-Stokes (RANS) simulations of the neutral atmospheric boundary layer (ABL) over complex terrain and a comparison of the results with conditionally averaged met-tower data are presented. A robust conditional sampling procedure for the meteorological tower (met-tower) data to identify near-neutral conditions based on a criterion for the turbulence intensity is developed. The conditionally averaged wind data on 14 met-towers are used for the model validation. The ABL flow simulations are conducted over complex terrain which includes a prominent hill using the OpenFOAM-based simulator for on/offshore wind farm applications (SOWFA) with the k-ϵ and the SST k-ω turbulence models. The discretization of the production term in the transport equation for the turbulent kinetic energy (TKE) is modified to greatly reduce the commonly observed nonphysical near surface TKE peak. The driving inflow is generated through an iterative approach using a precursor method to reproduce the measured wind statistics at the reference tower. Both of the RANS models are able to capture the flow behavior windward of the hill. The SST k-ω model predicts more intense flow separation than the k-ϵ model downstream of the steepest sections of the hill. The wind statistics predicted at the location of the met-towers by both of the RANS models are fairly consistent. Overall, the comparisons of the direction, mean, and standard deviation of the wind between the simulations and the tower data show reasonable agreement except for the differences of the mean wind speeds at four met-towers located closer to the main ridge of the hill in a region of strong terrain variations.

17 WIND ENERGY↗

Analysis of Satellite Drag and Spin Decay Data

Work was begun as an effort to obtain satellite drag and upper atmospheric wind data from a spinning spherical satellite to be launched from the space shuttle scheduled for the STS-11 flight. The satellite was an inflated sphere having high area-to-mass ratio which would result in measurable orbital decay due to aerodynamic drag forces experienced by the satellite in the Earth's upper atmosphere. The satellite would also experience a spin decay due to the aerodynamic torque acting to slow the satellite spinning. The original proposal was to develop data analysis procedures to be employed to extract the desired information. Work was performed concerning the data analysis procedure prior to the STS-11 launch; however, the major effort was to begin after the data had been obtained. Unfortunately, the launch of the inflatable sphere on STS-11 was a failure in that the sphere did not inflate properly and no data was obtained. The emphasis of the work planned under this effort was then changed to develop a proposal for a series of experiments similar to the one originally planned for STS-11.

Karr, G. R.↗

The use of assimilated stratospheric data in constituent transport calculations

A stratospheric assimilation system has been developed, which generates wind data that is consistent with the geopotential height (and temperature) field and the primitive equations in the general circulation model. This paper reports the first known calculations to use data from an assimilation to calculate constituent transport in the stratosphere. Nitric acid (NHO3) during the Limb IR Monitor of the Stratosphere (Gille et al., 1984) period is studied. The high-latitude time variance of the HNO3 is accurately captured. These studies suggest that data from an assimilation process offers tremendous potential for studying stratospheric dynamics, constituent transport, and chemistry.

Rood, Richard B.↗

Using Simple Statistical Analysis of Historical Data to Understand Wind Ramp Events

As renewable resources start providing an increasingly larger percentage of our energy needs, we need to improve our understanding of these intermittent resources so we can manage them better. In the case of wind resources, large unscheduled changes in the energy output, called ramp events, make it challenging to keep the load and the generation balanced. In this report, we show that simple statistical analysis of the historical data on wind energy generation can provide insights into these ramp events. In particular, this analysis can help answer questions such as the time period during the day when these events are likely to occur, the relative severity of positive and negative ramps, and the frequency of their occurrence. As there are several ways in which ramp events can be defined and counted, we also conduct a detailed study comparing different options. Our results indicate that the statistics are relatively insensitive to these choices, but depend on utility-specific factors, such as the magnitude of the ramp and the time interval over which this change occurs. These factors reflect the challenges faced by schedulers and operators in keeping the load and generation balanced and can change over the years. We conduct our analysis using data from wind farms in the Tehachapi Pass region in Southern California and the Columbia Basin region in Northern Oregon; while the results for other regions are likely to be different, the report describes the benefits of conducting simple statistical analysis on wind generation data and the insights that can be gained through such analysis.

99 GENERAL AND MISCELLANEOUS↗

Evolution of large-scale plasma structures in comets: Kinematics and physics

Cometary and solar wind data from December 1985 through April 1986 are presented for the purpose of determining the solar wind conditions associated with comet plasma tail disconnection events (DE's). The cometary data are from The International Halley Watch Atlas of Large-Scale Phenomena (Brandt, Niedner, and Rahe, 1992). In addition, we present the kinematic analysis of 4 DE's, those of Dec. 13.5 and 31.2, 1985, and Feb. 21.7 and 28.7, 1986. The circumstances of these DE's clearly illustrate the need to analyze DE's in groups. In situ solar wind measurements from IMP-8, ICE, and PVO were used to construct the variation of solar wind speed, density, and dynamic pressure during this interval. Data from these same spacecraft plus Vega-1 were used to determine the time of 48 current sheet crossings. These data were fitted to heliospheric current sheet curves extrapolated from the corona into the heliosphere in order to determine the best-fit source surface radius for each Carrington rotation. Comparison of the solar wind conditions and 16 DE's in Halley's comet (the four DE's discussed in this paper and 12 DE's in the literature) leaves little doubt that DE's are associated primarily with crossings of the heliospheric current sheet and apparently not with any other property of the solar wind. If we assume that there is a single or primary physical mechanism and that Halley's DE's are representative, efforts at simulation should concentrate on conditions at current sheet crossings. The mechanisms consistent with this result are sunward magnetic reconnection and tailward magnetic reconnection, if tailward reconnection can be triggered by the sector boundary crossing.

Brandt, John C.↗

Wind Integration National Dataset (WIND) Toolkit

Wind resource data for North America was produced using the Weather Research and Forecasting Model (WRF). The WRF model was initialized with the European Centre for Medium Range Weather Forecasts Interim Reanalysis (ERA-Interm) data set with an initial grid spacing of 54 km. Three internal nested domains were used to refine the spatial resolution to 18, 6, and finally 2 km. The WRF model was run for years 2007 to 2014. While outputs were extracted from WRF at 5 minute time-steps, due to storage limitations instantaneous hourly time-step are provided for all variables while full 5 min resolution data is provided for wind speed and wind direction only. The following variables were extracted from the WRF model data: - Wind Speed at 10, 40, 60, 80, 100, 120, 140, 160, 200 m - Wind Direction at 10, 40, 60, 80, 100, 120, 140, 160, 200 m - Temperature at 2, 10, 40, 60, 80, 100, 120, 140, 160, 200 m - Pressure at 0, 100, 200 m - Surface Precipitation Rate - Surface Relative Humidity - Inverse Monin Obukhov Length

API↗

Wind energy potential analysis in Al-Fattaih-Darnah

In this paper the wind energy potential in Al-Fattaih-Darnah, Libya, had been studied. Wind energy is very attractive because it can provide a clean and renewable energy. Due mostly to the uncertainty caused by the chaotic characteristics of wind near the earth’s surface, wind energy characteristic need to be investigated carefully in order to get consistent power generation. This investigation was based on one year wind data measured in 2003. As a result of the analysis, wind speed profile and wind energy potential have been developed. The wind energy potential of the location is looked very promising to generate electricity. The annual wind speed of the site is 8.21 m/s and the wind speed carrying maximum energy is 7.97 m/s. The annual power density of the site is classified into class 3. The Polaris P50-500 wind turbine can produce 768.39 M Wh/year and has capacity factor of 17.54%.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

TYPE III RADIO BURSTS IN CORONAL PLASMAS WITH KAPPA PARTICLE DISTRIBUTIONS

We present the first simulations of type III bursts produced in the corona with suprathermal non-Maxwellian background particles, as inferred from solar wind data and proposed by theories for the corona and solar wind. The coronal background particles are assumed to follow kappa ({kappa}) distributions. The predicted f{sub p} emission of type III bursts is sensitive via the {kappa} index to the presence of suprathermal background particles, where f{sub p} is the local plasma frequency. The simulations show that (1) the speeds v{sub b} of type III beams are much larger (e.g., v{sub b} Almost-Equal-To 0.58c for {kappa} = 5) and so type III bursts drift much faster for low {kappa} ({<=}5) background plasmas than for Maxwellian backgrounds (producing v{sub b} < 0.3c), and (2) f{sub p} emission generated in a {kappa}-distributed background corona has a larger total bandwidth than in a Maxwellian background, for similar onset frequencies. Type III beams are thus more persistent, i.e., extending over larger distances, in {kappa}-distributed corona. Consequently, observations of fast-drifting coronal type III bursts and associated fast electron beams suggest that the ambient electrons in the corona are {kappa}-distributed, at least when such bursts are observed. These results support, from the new viewpoint of nonthermal radio emission, the occasional presence of suprathermal background electrons in the corona and the associated mechanisms (e.g., 'velocity filtration') for coronal heating and solar wind acceleration. The new results also help resolve longstanding issues regarding the speeds and persistence of type III beams, and the production of remotely observable levels of f{sub p} emission despite severe losses during propagation.

79 ASTRONOMY AND ASTROPHYSICS↗

Simulation studies of the impact of future observing systems on weather prediction

The features and preliminary results from a simulation system being implemented to develop realistic estimates of the impacts future data acquisition systems will have on large-scale numerical weather simulation are described. The new instruments may include advanced passive IR and microwave satellite sensors, as well as active scatterometer and lidar sounders. A main goal of the impact study is to identify those sensor systems which will provide the most benefit. The realism of the study is being enhanced by assimilating as much real-world data as possible and generating global weather maps for comparison with maps generated on the bases on the projected new, higher resolution data. Early results have indicated a preference for higher resolution wind data than for temperature data for making 1-5 day forecasts. The prime instrument candidate for collecting the data is lidar, provided the sensor resolution design goals are met.

Atlas, R.↗

Growth-phase thinning of the near-Earth current sheet during the CDAW 6 substorm

The thinning of the near-Earth current sheet during the growth phase of the Coordinated Data Analysis Workshop (CDAW) 6 magnetospheric substorm is studied. The expansion onset of the substorm occurred at 1054 UT, March 22, 1979. During the growth phase, two spacecraft, International Sun Earth Explorer (ISEE) 1 and ISEE 2, were within the current sheet approximately 13 R(sub E) from the Earth and obtained simultaneous high-resolution magnetic data at two points in the current sheet. Plasma data were also provided by the ISEE spacecraft and solar wind data by IMP 8. To facilitate the analysis, the GSM magnetic field data are transformed to a 'neutral sheet coordinate system' in which the new x axis is parallel to the average magnetic field above and below the neutral sheet and the new y axis lies in the GSM equatorial plane. A model based on the assumption that the current sheet is a time-invariant structure fails to predict neutral sheet crossing times. Consequently, the Harris sheet model, which allows one to remove the restriction of time invariancy, is used instead. It is found that during the growth phase, a model parameter corresponding to the thickness of the current sheet decreased exponentially from about 5 R(sub E) to 1 R(sub E) with a time constant of about 14 min. In addition, the ISEE 1 and ISEE 2 neutral sheet crossings after expansion onset indicate that the neutral sheet was moving upward at 7 km/s relative to the spacecraft. Since both crossings occurred in approximately 80 s, the current sheet thickness is estimated to be about 500 km. These results demonstrate that the near-Earth current sheet undergoes dramatic thinning during the substorm growth phase and expansion onset.

Sanny, Jeff↗

DEPOSITION VELOCITY ESTIMATION WITH THE GENII V2 SOFTWARE

In 2010, the Department of Energy (DOE) Chief of Nuclear Safety and Office of Health, Safety and Security (HSS), with the support of industry experts in atmospheric sciences and accident dose consequences analysis, performed detailed analyses of the basis for the dry deposition velocity (DV) values used in the MACCS2 computer code. As a result of these analyses, DOE concluded that the historically used default DV values of 1 centimeter/second (cm/s) for unfiltered/unmitigated releases and 0.1 cm/s for filtered/mitigated releases may not be reasonably conservative for all DOE sites and accident scenarios. HSS recently issued Safety Bulletin 2011-02, Accident Analysis Parameter Update, recommending the use of the newly developed default DV, 0.1 cm/s for an unmitigated/unfiltered release. Alternatively site specific DV values can be developed using GENII version 2 (GENII v2) computer code. Key input parameters for calculating DV values include surface roughness, maximum wind speed for calm, particle size, particle density and meteorological data (wind speed and stability class). This paper will include reasonably conservative inputs, and a truncated parametric study. In lieu of the highly-conservative recommended DV value (0.1cm/s) for unmitigated/unfiltered release, GENII v2 has been used to justify estimated 95th percentile DV values. Also presented here are atmospheric dilution factors ({chi}/Q values) calculated with the MACCS2 code using the DV values form GENII v2, {chi}/Q values calculated directly with GENII v2, and a discussion of these results compare with one another. This paper will give an overview of the process of calculating DV with GENII v2 including a discussion of the sensitivity of input parameters.

99 GENERAL AND MISCELLANEOUS↗