Search NASA⌕ Search

SEARCH · Search NASA

Results for “2D organic complexes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Extremely rapid, Lagrangian modeling of 2D flooding: A rivulet-based approach

Estimates of potential flood inundation areas and depths are critical to informing the preparedness, response, and investment decisions of many government agencies and private sector organizations, especially under a changing climate. The standard modeling approaches, however, are often either computationally intensive or constrained in their accuracy or applicability. A novel, rivulet-based, 2D model of pluvial flooding is described in this article that is 10,000 to 10 million times less computationally complex than the full solution of the shallow water equations, yet achieves inundation area hit rates of between 0.8 and 0.9 and relative absolute mean errors of 10%-20% across a wide range of flow depths. This combination of accuracy and efficiency will enable real-time depth estimates during flood events, detailed sensitivity analyses, and the generation of large ensembles to support broad uncertainty analyses.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Evolution of the Electronic and Excitonic Properties in 2D Ruddlesden–Popper Perovskites Induced by Bifunctional Ligands

2D Ruddlesden–Popper metal‐halide perovskites exhibit structural diversity due to a variety of choices of organic ligands. Incorporating bifunctional ligands in such materials is particularly intriguing since it can result in novel electronic properties and functions. However, an in‐depth understanding of the effects of bifunctional ligands on perovskite structures and, consequently, their electronic and excitonic properties, is still lacking. Here, in this work, n = 1 2D perovskites built with organic ligands containing ─CN, ─OH, ─COOH, ─phenyl (Ph), and ─CH 3 functional groups are investigated using ultraviolet and inverse photoemission spectroscopies, density functional theory calculations, and tight‐binding model analyses. The experimentally determined electronic gaps of the ─CN, ─COOH, ─Ph, and ─CH 3 based perovskites exhibit a strong correlation with the in‐plane Pb─I─Pb bond angle, while the ─OH based perovskite deviates from the linear trend. Based on the band structure calculations, this anomaly is attributed to the out‐of‐plane dispersion, caused predominantly by significant interlayer electronic coupling that is present in ─OH based perovskites. These results highlight the complex and diverse impacts of organic ligands on electronic properties, especially in terms of the involvement of strong interlayer electronic coupling. The impact of the bifunctional ligands on the evolution of the exciton binding energy is also addressed.

2D perovskites↗
DOE OSTI2024

Synthesis and characterization of low-dimensional N-heterocyclic carbene lattices

The covalent interaction of N-heterocyclic carbenes (NHCs) with transition metal atoms gives rise to distinctive frontier molecular orbitals (FMOs). These emergent electronic states have spurred the widespread adoption of NHC ligands in chemical catalysis and functional materials. Although formation of carbene-metal complexes in self-assembled monolayers on surfaces has been explored, design and electronic structure characterization of extended low-dimensional NHC-metal lattices remains elusive. Here, in this work, we demonstrate a modular approach to engineering one-dimensional (1D) metal-organic chains and two-dimensional (2D) Kagome lattices using the FMOs of NHC–Au–NHC junctions to create low-dimensional molecular networks exhibiting intrinsic metallicity. Scanning tunneling spectroscopy and first-principles density functional theory reveal the contribution of C–Au–C π-bonding states to dispersive bands that imbue 1D- and 2D-NHC lattices with exceptionally small work functions.

Qie, Boyu↗
NASA NTRS1998

Evidence of Microfossils in Carbonaceous Chondrites

Investigations have been carried out on freshly broken, internal surfaces of the Murchison, Efremovka and Orgueil carbonaceous chondrites using Scanning Electron Microscopes (SEM) in Russia and the Environmental Scanning Electron Microscope (ESEM) in the United States. These independent studies on different samples of the meteorites have resulted in the detection of numerous spherical and ellipsoidal bodies (some with spikes) similar to the forms of uncertain biogenicity that were designated "organized elements" by prior researchers. We have also encountered numerous complex biomorphic microstructures in these carbonaceous chondrites. Many of these complex bodies exhibit diverse characteristics reminiscent of microfossils of cyanobacteria such as we have investigated in ancient phosphorites and high carbon rocks (e.g. oil shales). Energy Dispersive Spectroscopy (EDS) analysis and 2D elemental maps shows enhanced carbon content in the bodies superimposed upon the elemental distributions characteristic of the chondritic matrix. The size, distribution, composition, and indications of cell walls, reproductive and life cycle developmental stages of these bodies are strongly suggestive of biology' These bodies appear to be mineralized and embedded within the meteorite matrix, and can not be attributed to recent surface contamination effects. Consequently, we have interpreted these in-situ microstructures to represent the lithified remains of prokaryotes and filamentous cyanobacteria. We also detected in Orgueil microstructures morphologically similar to fibrous kerite crystals. We present images of many biomorphic microstructures and possible microfossils found in the Murchison, Efremovka, and Orgueil chondrites and compare these forms with known microfossils from the Cambrian phosphate-rich rocks (phosphorites) of Khubsugul, Northern Mongolia.

Hoover, Richard B.↗
DOE OSTI2023

Reversible Phase Transformation of Colloidal 2D Lead Halide Perovskite Platelets under Photoirradiation

The photostability of lead halide perovskites is an important criterion for their utilization in light harvesting applications. Colloidal two-dimensional mixed halide perovskites offer a convenient approach to probe photoinduced transformations using spectroscopy tools. We employed suspensions of colloidal 2D methylammonium lead halide perovskite platelets with butylammonium and octylammonium as organic spacer cations. Upon irradiation of the mixed halide perovskite (BAOAMAPb 2 (Br 3.5 I 3.5 )) colloidal platelet suspension, we observe a phase transformation, as seen from the formation of bromide rich domains (BAOAMAPb 2 Br 7 ) and an iodide complex (PbI 3 – ). Unlike in the case of 3D mixed halide films, we did not observe the formation of iodide rich domains as part of the photoinduced phase segregation process. Instead, we observed the dissociation of the BAOAMAPb 2 I 7 to form an iodide complex, PbI 3 – . Interestingly, this photoinduced phase transformation was reversible, as the products which were confined in the colloidal core restored the original mixed halide phase upon storage in dark. The spectroscopic measurements that characterize excited states of different colloidal methylammonium lead halide perovskites and kinetics of photoinduced transformation and their dark recovery are presented. Furthermore, these new phototransformations of colloidal perovskite platelets provide new insights into the processes that dictate their overall photostability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Photophysics and Carrier Dynamics of Lasing in Quasi-2D Lead Halide Perovskites

Quasi-2D perovskites have recently been extensively studied due to their narrow-bandwidth-tunable emission, solution processability, and applicability as optical gain media. Quasi-2D perovskites are composed of inorganic perovskite crystal layers encapsulated with a bulky organic ligand such as phenylethylammonium, endowing the perovskite with a quantum-well structure and improved stability. In this article, we explore the photophysics of a quasi-2D metal halide perovskite as a promising light-harvesting and emitting medium. We find it exhibits high optical absorption (~10 5 cm -1 ) and an optically pumped amplified spontaneous emission threshold at 623 μJ/cm 2 . We study charge transfer processes in the complex mixed quantum wells of these perovskites through transient absorption and time-resolved photoluminescence measurements and develop a phenomenological model that incorporates optical gain for lasing. Further, while both free carriers and excitons are observed, we show surprisingly that photoluminescence is dominated by excitons despite the relatively small binding energy (~16 meV) of the low-energy band edge. Additionally, we extract the rates of exciton relaxation pathways, revealing a relatively large radiative term of 4.6 x 10 8 s -1 as well as an exciton-exciton annihilation term of 3.6 x 10 -13 cm 3 s -1 that is 3 orders of magnitude smaller than in similar quasi-2D perovskites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Mosaic Cu I –Cu II –In III 2D Perovskites: Pressure–Dependence of the Intervalence Charge Transfer and a Mechanochemical Alloying Method

The perovskite (BA) 4 [Cu II (Cu I In III ) 0.5 ]Cl 8 (1 BA ; BA + =butylammonium) allows us to study the high-pressure structural, optical, and transport properties of a mixed-valence 2D perovskite. Compressing 1 BA reduces the onset energy of Cu I/II intervalence charge transfer from 1.2 eV at ambient pressure to 0.2 eV at 21 GPa. The electronic conductivity of 1 BA increases by 4 orders of magnitude upon compression to 20 GPa, when the activation energy for conduction decreases to 0.16 eV. In contrast, Cu II perovskites achieve similar conductivity at ≈50 GPa. The solution-state synthesis of these perovskites is complicated, with more undesirable side products likely from the precursor mixtures containing three different metal ions. Finally, to circumvent this problem, we demonstrate an efficient mechanochemical synthesis to expand this family of halide perovskites with complex composition by simply pulverizing together powders of 2D Cu II single perovskites and Cu I In III double perovskites.

2D perovskite↗
DOE OSTI2021

Luminescent and Magnetic Tb-MOF Flakes Deposited on Silicon

The synthesis of a terbium-based 2D metal–organic framework (MOF), of formula [Tb(MeCOO)(PhCOO) 2 ] (1), a crystalline material formed by neutral nanosheets held together by Van der Waals interactions, is presented. The material can be easily exfoliated by sonication and deposited onto different substrates. Uniform distributions of Tb-2D MOF flakes onto silicon were obtained by spin-coating. We report the luminescent and magnetic properties of the deposited flakes compared with those of the bulk. Complex 1 is luminescent in the visible and has a sizeable quantum yield of QY = 61% upon excitation at 280 nm. Photoluminescence measurements performed using a micro-Raman set up allowed us to characterize the luminescent spectra of individual flakes on silicon. Magnetization measurements of flakes-on-silicon with the applied magnetic field in-plane and out-of-plane display anisotropy. Ac susceptibility measurements show that 1 in bulk exhibits field-induced slow relaxation of the magnetization through two relaxation paths and the slowest one, with a relaxation time of τ lf ≈ 0.5 s, is assigned to a direct process mechanism. The reported exfoliation of lanthanide 2D-MOFs onto substrates is an attractive approach for the development of multifunctional materials and devices for different applications.

2D MOFs↗
DOE OSTI2023

Water, Ion, and Proton Dynamics and Interactions in Nanoconfined Systems

The research was directed at understanding the role that nanoconfinement has on the dynamics and structure of liquids confined in nanometer size structures. Experiments were conducted using ultrafast infrared methods. The methods were two dimensional infrared (2D IR) spectroscopy and polarization pump-probe (PSPP) experiments. In addition FT-IR spectroscopy was used. To augment the experimental work, high level molecular dynamics simulations of the systems were conducted. The system used for confinement were nanoporous silica with essentially monodispersed pores. Pores of different diameters were studies, i.e., 2.5 nm to 8 nm. Water and organic liquids were investigated. The experiments were performed on a vibrational probe molecule, i.e., the CN stretch of the anion SeCN-. The 2D IR experiments measured spectral diffusion, which directly reported on the structural dynamics of the confined liquids. 2D IR was also used to perform chemical exchange measurements, which observed the formation and dissociation of molecular complexes with surface silanols. The PSPP experiments measured orientational relaxation of the probe molecule as well as it vibrational lifetime. All of the observables depended on the diameter of the pores and the type of liquid. The simulations of the observables provided detailed structural information on the structure of the confined liquids and there interactions with the surfaces. In addition to the study of the confinement in nanopores, water in hydrogels was also studied. The same experimental methods were used along with MD simulations. It was found the influence of hydrogels on water did not come from confinement of the water in the hydrogel polymer network, but rather from the interactions of the water with the individual monomers that compose the polymer. In addition, the temperature dependence of a polymer/water system was tracked from below to above the lower critical solution temperature to observe the nature of the phase separated polymer and how water responded to the phase separation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Capturing the Relative‐Humidity‐Sensitive Gas–Particle Partitioning of Organic Aerosols in a 2D Volatility Basis Set

Abstract Aerosol water affects the physicochemical properties and mass concentration of organic aerosols (OA), but it is typically omitted by air quality, weather, and climate models. We compare two classes of simplified models to estimate the OA water uptake and gas–particle partitioning of organic compounds. One class uses a single‐hygroscopicity‐parameter (κ) approach while the other is based on the reduced‐complexity Binary Activity Thermodynamics (BAT) model. We show that a BAT‐based two‐dimensional volatility basis set (VBS) model always predicts a higher OA mass concentration at elevated relative humidity (RH), for example, ∼16% at 80% RH, than any variation of theκ‐based method considered—even when BAT‐VBS predicts a lower water uptake. The main reason being that the BAT‐VBS model captures variations in effective saturation mass concentration of organics (C*) with RH, a feature that other VBS methods lack. The BAT‐VBS framework offers an efficient, RH‐sensitive treatment for reduced‐complexity OA modeling.

Geology↗
DOE OSTI2020

Applying Configurational Complexity to the 2D Ruddlesden–Popper Crystal Structure

The layered Ruddlesden–Popper crystal structure can host a broad range of functionally important behaviors. In this work, we establish extraordinary configurational disorder in a layered Ruddlesden–Popper (RP) structure using entropy stabilization assisted synthesis. A protype A 2 CuO 4 RP cuprate oxide with five cations on the A-site sublattice is designed and fabricated into epitaxial single crystal films using pulsed laser deposition. When grown on a near lattice matched substrate, the (La 0.2 Pr 0.2 Nd 0.2 Sm 0.2 Eu 0.2 ) 2 CuO 4 film features a T'-type RP structure with uniform A-site cation mixing and square-planar CuO4 units. These observations are made with a range of combined characterizations using X-ray diffraction, atomic-resolution scanning transmission electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray absorption spectroscopy measurements. It is further found that heteroepitaxial strain plays an important role in crystal phase formation during synthesis. Compressive strain over ~1.5% results in the formation of a non-RP cubic phase consistent with a Cu X 2O 4 spinel structure. The ability to manipulate configurational complexity and move between 2D layered RP and 3D cubic crystal structures in cuprate and related materials promises to enable flexible design strategies for a range of functionalities, such as magnetoresistance, unconventional superconductivity, ferroelectricity, catalysis, and ion transport.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Large exchange-driven intrinsic circular dichroism of a chiral 2D hybrid perovskite

Abstract In two-dimensional chiral metal-halide perovskites, chiral organic spacers endow structural and optical chirality to the metal-halide sublattice, enabling exquisite control of light, charge, and electron spin. The chiroptical properties of metal-halide perovskites have been measured by transmissive circular dichroism spectroscopy, which necessitates thin-film samples. Here, by developing a reflection-based approach, we characterize the intrinsic, circular polarization-dependent complex refractive index for a prototypical two-dimensional chiral lead-bromide perovskite and report large circular dichroism for single crystals. Comparison with ab initio theory reveals the large circular dichroism arises from the inorganic sublattice rather than the chiral ligand and is an excitonic phenomenon driven by electron-hole exchange interactions, which breaks the degeneracy of transitions between Rashba-Dresselhaus-split bands, resulting in a Cotton effect. Our study suggests that previous data for spin-coated films largely underestimate the optical chirality and provides quantitative insights into the intrinsic optical properties of chiral perovskites for chiroptical and spintronic applications.

25 ENERGY STORAGE↗
DOE OSTI2024

Elimination of homogeneous broadening in 1 H solid-state NMR

1 H solid-state NMR spectra are plagued by low resolution, necessitating the use of complex pulse sequences or specialized equipment. Here, we introduce a new resolution enhancement method, inspired by super-resolution microscopy, that uses a 2D Hahn-echo experiment to constrain deconvolution. The result is an effective doubling of the MAS frequency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Applications of ultrafast nano-spectroscopy and nano-imaging with tip-based microscopy

Innovation in microscopy has often been critical in advancing both fundamental science and technological progress. Notably, the evolution of ultrafast near-field optical nano-spectroscopy and nano-imaging has unlocked the ability to image at spatial scales from nanometers to ångströms and temporal scales from nanoseconds to femtoseconds. This approach revealed a plethora of fascinating light-matter states and quantum phenomena, including various species of polaritons, quantum phases, and complex many-body effects. This review focuses on the working principles and state-of-the-art development of ultrafast tip-enhanced and near-field microscopy, integrating diverse optical pump-probe methods across the terahertz (THz) to ultraviolet (UV) spectral ranges. It highlights their utility in examining a broad range of materials, including two-dimensional (2D), organic molecular, and hybrid materials. The review concludes with a spatio-spectral-temporal comparison of ultrafast nano-imaging techniques, both within already well-defined domains, and offering an outlook on future developments of ultrafast tip-based microscopy and their potential to address a wider range of materials.

Zhao, Zhichen [Tongji University, Shanghai (China)↗
NASA NTRS2003

A Cartesian Adaptive Level Set Method for Two-Phase Flows

In the present contribution we develop a level set method based on local anisotropic Cartesian adaptation as described in Ham et al. (2002). Such an approach should allow for the smallest possible Cartesian grid capable of resolving a given flow. The remainder of the paper is organized as follows. In section 2 the level set formulation for free surface calculations is presented and its strengths and weaknesses relative to the other free surface methods reviewed. In section 3 the collocated numerical method is described. In section 4 the method is validated by solving the 2D and 3D drop oscilation problem. In section 5 we present some results from more complex cases including the 3D drop breakup in an impulsively accelerated free stream, and the 3D immiscible Rayleigh-Taylor instability. Conclusions are given in section 6.

Ham, F.↗
DOE OSTI2022

Understanding the p-doping of spiroOMeTAD by tris(pentafluorophenyl)borane

The solid-state organization of photoabsorber, hole and electron transporting layers, and interfaces between them plays an important role in governing the performance and stability of emerging optoelectronic devices such as perovskite solar cells (PSCs). The molecular organic semiconductor (OSC) 2,2' ,7,7' -tetrakis [N,N-di(4-methoxyphenyl)amino]-9,9'-spirobifluorene (spiroOMeTAD) is a promising hole-transporting material (HTM) for PSCs, which is p-doped by molecular dopants to augment the charge carrier mobility. Here, the p-type doping of spiroOMeTAD by tris(pentafluorophenyl)borane (BCF) is investigated by a combination of techniques including optical spectroscopy, X-ray diffraction, Fourier transform infrared (FTIR), solid-state (ss)NMR, and electron paramagnetic resonance (EPR) spectroscopy. BCF molecules interact with traces of water molecules to form BCF-water complexes. Optical spectroscopy analysis suggests that the BCF/BCF-water complexes oxidize spiroOMeTAD molecules and facilitate p-type doping of spiroOMeTAD molecules. The different distributions of BCF and BCF-water molecules in doped spiroOMeTAD are characterized by FTIR and 11B NMR spectroscopy. An NMR crystallography approach which combines two-dimensional (2D) ssNMR and crystallography modeling is employed to unravel the packing interactions in spiroOMeTAD, and this analysis is extended to probe the morphological and structural changes in spiroOMeTAD:BCF blends. The hyperfine interactions are characterized by 2D hyperfine sub-level correlation (HYSCORE) spectroscopy. In this way, insight into the complex spiroOMeTAD:BCF blend morphology is obtained and compared for different dopant concentrations. Further, molecular-level analysis of doped HTMs enabled by this study has much wider relevance for further investigation, for example, chemical design and interfacial engineering of p-type doped HTMs for stable and efficient hybrid perovskite photovoltaics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

1,8-Dihydroxy Naphthalene—A New Building Block for the Self-Assembly with Boronic Acids and 4,4′-Bipyridine to Stable Host–Guest Complexes with Aromatic Hydrocarbons

The new Lewis acid–base adducts of general formula X(nad)B←NC5H4-C5H4N→B(nad)X [nad = 1,8-O2C10H6, X = C6H5 (2c), 3,4,5-F3-C6H2 (2d)] were synthesized in high yields via reactions of 1,8-dihydroxy naphthalene [nadH2] and 4,4′-bipyridine with the aryl boronic acids C6H5B(OH)2 and 3,4,5-F3-C6H2B(OH)2, respectively, and structurally characterized by multi-nuclear NMR spectroscopy and SCXRD. Self-assembled H-shaped Lewis acid–base adduct 2d proved to be effective in forming thermally stable host–guest complexes, 2d × solvent, with aromatic hydrocarbon solvents such as benzene, toluene, mesitylene, aniline, and m-, p-, and o-xylene. Crystallographic analysis of these solvent adducts revealed host–guest interactions to primarily occur via π···π contacts between the 4,4′-bipyridyl linker and the aromatic solvents, resulting in the formation of 1:1 and 1:2 host–guest complexes. Thermogravimetric analysis of the isolated complexes 2d × solvent revealed their high thermal stability with peak temperatures associated with the loss of solvent ranging from 122 to 147 °C. 2d, when self-assembled in an equimolar mixture of m-, p-, and o-xylene (1:1:1), preferentially binds to o-xylene. Collectively, these results demonstrate the ability of 1,8-dihydroxy naphthalene to serve as an effective building block in the selective self-assembly to supramolecular aggregates through dative covalent N→B bonds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗