Search NASA⌕ Search

SEARCH · Search NASA

Results for “3D electronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Wire Plane Transparency: Commissioning the Time Projection Chambers for the Short-Baseline Near Detector

The Short Baseline Near Detector (SBND) serves as the near detector for Fermilab's Short Baseline Neutrino (SBN) programme. It is a 112-ton Liquid Argon Time Projection Chamber (LArTPC) designed to study neutrino-argon interactions and search for new physics phenomena such as sterile neutrinos. Situated just 110 m from the Booster Neutrino Beam (BNB), SBND just began its first physics run and is expected to record over two million neutrino interactions annually. Commissioning the time projection chambers of SBND is crucial for optimising detector performance. Each of the two anodes is composed of three charge-sensing wire planes which detect drifting ionisation electrons from charged particles traversing the detector. The wire planes, arranged with different 2D orientations, facilitate the 3D reconstruction of neutrino interactions. Electron transport induces signals on the first two planes, with the signal being collected by the rear plane. The first two induction planes require transparency to ensure all drift electrons reach the collection plane. This transparency depends on the bias voltages applied to the wires and the spacing between them. Fine-tuning these bias voltages ensures the optimisation of wire plane transparency. In this poster, I will demonstrate how transparency can be assessed by analysing the waveforms from cosmic-ray muon tracks traversing the detector at specific orientations.

McCusker, Bethany [Unlisted, US]↗
DOE OSTI2024

Fast photodiode arrays for high frequency fluctuation measurements of reconnecting flux ropes

An array of compact, high-bandwidth (>200 MHz) and low-cost optical photodiodes has been developed and implemented on the PHASe MApping (PHASMA) experiment. Using purpose-built electronics, an array of 16 photodetectors was constructed and used to monitor broadband (1–5 MHz) fluctuations in light intensity emitted by flux ropes undergoing electron-only magnetic reconnection. These measurements reveal a swath of oscillatory behavior, including wave propagation inward toward the diffusion region at approximately the local electron Alfvén speed. Custom 3D-printed collection optics and mounting hardware allow quick reconfiguration of the array for radial or axial measurements. The electronics design is flexible enough to be used with other current-sourcing transducers, such as avalanche photodiodes; silicon photomultipliers; and infrared, x-ray, and UV photodiodes. A noise-rejecting electrical layout allows for low-noise operation close to pulsed plasma discharges. A 16-channel, 64-pixel tomographic array was constructed and initial reconstructions are presented.

Instruments & Instrumentation↗
DOE OSTI2024

Synergistic Combination of Living Ring-Opening Metathesis Polymerization and Atom Transfer Radical Polymerization to Synthesize Structurally Tailored and Engineered Macromolecular Networks

Structurally tailored and engineered macromolecular (STEM) networks are attractive materials for soft robotics, stretchable electronics, tissue engineering, and 3D printing due to their tunable properties. To date, STEM networks have been synthesized by atom transfer radical polymerization (ATRP) or the combination of reversible addition–fragmentation chain-transfer (RAFT) polymerization and ATRP. RAFT polymerization could have limited selectivity with ATRP inimer sites that can participate in radical-transfer processes. On the other hand, living ring-opening metathesis polymerization (ROMP) can produce a polymeric network with latent ATRP initiator sites in high selectivity. Herein, for the first time, we report the syntheses of STEM zero-generation (STEM-0) networks using a monomer, a cross-linker, and an ATRP/ROMP inimer via living ROMP, followed by their modification using a second monomer via ATRP to synthesize STEM first-generation (STEM-1) networks. The mechanical property and swelling capacity analyses of these networks were carried out. A change in mechanical properties and swelling capacity of these networks was observed due to their structural modification.

Absorption↗
DOE OSTI2026

Power Electronics Module with Integrated Ceramic Heat Exchanger

NREL, in partnership with Synteris and Packet Digital, has developed a 3D-printable ceramic package for power electronic modules to improve their thermal management, power density, performance, and lifetime. Existing power modules contain flat ceramic substrates that serve as both the electrically insulating component and thermal conductor that transfer the large heat outputs of these devices. The team has developed an additive manufacturing process that replaces the traditional insulating metalized substrate, substrate attach, and baseplate/heat exchanger with an additively-manufactured ceramic packaging that acts as both an electrical insulator and heat exchanger for better thermal management. The design, manufacturability, and function of this power module will be discussed.

25 ENERGY STORAGE↗
DOE OSTI2025

Using convolutional neural networks to accelerate three-dimensional coherent synchrotron radiation computations

Calculating the effects of coherent synchrotron radiation (CSR) is one of the most computationally expensive tasks in accelerator physics. Here, we use convolutional neural networks (CNNs), along with a latent conditional diffusion (LCD) model, trained on physics-based simulations to speed up calculations. Specifically, we produce the 3D CSR wakefields generated by electron bunches in circular orbit in the steady-state condition. Two datasets are used for training and testing the models: wakefields generated by three-dimensional Gaussian electron distributions and wakefields from a sum of up to 25 three-dimensional Gaussian distributions. The CNNs are able to accurately produce the 3D wakefields ∼250–1000 times faster than the numerical calculations, while the LCD achieves a gain of a factor of ∼34. We also test the extrapolation and out-of-distribution generalization ability of the models. They generalize well on distributions with larger spreads than what they were trained on but struggle with smaller spreads.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Atomic ionization: sd energy imbalance and Perdew–Zunger self-interaction correction energy penalty in 3d atoms

To accurately describe the energetics of transition metal systems, density functional approximations (DFAs) must provide a balanced description of s- and d- electrons. One measure of this is the sd transfer error, which has previously been defined as E ( 3 d n − 1 4 s 1 ) − E ( 3 d n − 2 4 s 2 ) . Theoretical concerns have been raised about this definition due to its evaluation of excited-state energies using ground-state DFAs. A more serious concern appears to be strong correlation in the 4s 2 configuration. Here, we define a ground-state measure of the sd energy imbalance, based on the errors of s- and d-electron second ionization energies of the 3d atoms, that effectively circumvents the aforementioned problems. We find an improved performance as we move from the local spin density approximation (LSDA) to the Perdew-Burke-Ernzerhof (PBE) generalized gradient approximation (GGA) to the regularized and restored Strongly Constrained and Appropriately Normed (r 2 SCAN) meta-GGA for first-row transition metal atoms. However, we find large (∼2 eV) ground-state sd energy imbalances when applying a Perdew–Zunger 1981 self-interaction correction. This is attributed to an “energy penalty” associated with the noded 3d orbitals. A local scaling of the self-interaction correction to LSDA results in a balance of s- and d-errors.

Science & Technology - Other Topics↗
DOE OSTI2025

A search for Heavy Neutral Leptons with masses up to 150 MeV and studies on scintillation light detection in SBND

Introduction Neutrino physics is one of today’s most promising fields in particle physics. The discovery of neutrino oscillations is an evidence of their mass not being null. However, the Standard Model of elementary particles (SM) does not contain a mechanism that generates them, so we have to search beyond the SM to find answers. Other unknowns remain open, such as the amount of CP symmetry violated in the lepton sector that could help explain the differences between matter and antimatter that formed the present universe. Nor is it understood why these particles are so light, more than six orders of magnitude below the next fermion, the electron. A possible explanation is the existence of heavier neutrino mass states usually referred as heavy neutral leptons (HNLs). One of the most advanced technologies for detecting neutrino interactions is the liquid argon time projection chamber (LArTPC). LArTPC detectors form a 3D image of the ionized electrons in the interaction, producing a detailed description of each neutrino event. Argon is also a prolific scintillator (40k photons/MeV) with light signals indicating the interaction time. The Short-Baseline Near Detector (SBND), a 112-active mass LArTPC at Fermilab, will measure millions of neutrino interactions from the Booster Neutrino Beam (BNB). As the near (L=110 m) detector of the Short-Baseline neutrino program, SBND will search for a fourth light neutrino (∼ eV) in the coming years. This hypothesis could explain the anomalous data observed in the LSND and MiniBooNE experiments.

Álvarez Garrote, Rodrigo [Madrid U.] (ORCID:000000↗
DOE OSTI2026

Hot electron preheat effects in two-photon polymerization plastic lattice laser-driven shock-tube experiments on the OMEGA laser

We present simulations of Omega shock tube experiments designed to investigate hot electron preheat effects in 3D-printed, two-photon polymerization (2PP) plastic lattices. Preheat is inferred in the experiments from the expansion of a plastic witness disk embedded in the lattice. Using the Eulerian radiation-hydrodynamics code xRAGE, we model shock propagation and preheat from both radiative and hot electron energy sources to evaluate their relative impact. To simulate the transport of laser-generated hot electrons, the nonlocal electron heat transport model proposed by Schurtz, Nicolaï, and Busquet (SNB) is extended with a hot electron source term and an energy cascade algorithm. We explore how variations in ablator, lattice geometry, and laser drive affect the shock velocity and witness disk expansion. Simulations show that the inclusion of a 5 μm gold layer reduces shock pressure by 60% and shock speeds by 30%–40% but does not significantly reduce the hot electron preheat, and that different lattice geometries lead to enhanced shock velocities—up to 40% faster than in homogeneous foams. However, radiative and conductive preheat from classical mechanisms alone fail to match experiment. By including a hot electron source term, we reproduce experimental observables such as disk expansion rates and spatial radiographic features. We find that a hot electron population corresponding to 4%–8% of the incident laser energy with T hot = 50 keV produces expansion which agrees with the experimental data, suggesting hot electron preheat is the most plausible explanation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Atomic-scale 3D structural dynamics and functional degradation of Pt alloy nanocatalysts during the oxygen reduction reaction

Pt-based electrocatalysts are the primary choice for fuel cells due to their superior oxygen reduction reaction (ORR) activity. To enhance ORR performance and durability, extensive studies have investigated transition metal alloying, doping, and shape control to optimize the three key governing factors for ORR: geometry, local chemistry, and strain of their surface and subsurface. However, systematic optimization remains incomplete, as it requires an atomic-scale understanding of these factors and their dynamics over potential cycling, as well as their relationship to ORR activity. Here, we implement neural network-assisted atomic electron tomography to measure the 3D atomic structural dynamics and their effects on the functional degradation of PtNi alloy catalysts. Our results reveal that PtNi catalysts undergo shape changes, surface alloying, and strain relaxation during cycling, which can be effectively mitigated by Ga doping. By combining geometry, local chemistry, and strain analysis, we calculated the changes in ORR activity over thousands of cycles and observed that Ga doping leads to higher initial activity and greater stability. These findings offer a pathway to understanding 3D atomic structural dynamics and their relation to ORR activity during cycling, paving the way for the systematic design of durable, high-efficiency nanocatalysts.

Jeong, Chaehwa↗
DOE OSTI2025

Dark-field x-ray microscopy for 2D and 3D imaging of microstructural dynamics at the European x-ray free-electron laser

Dark field x-ray microscopy (DXFM) can visualize microstructural distortions in bulk crystals. Using the femtosecond x-ray pulses generated by x-ray free-electron lasers (XFELs), DFXM can achieve sub-μm spatial resolution and <100 fs time resolution simultaneously. In this paper, we demonstrate ultrafast DFXM measurements at the European XFEL to visualize an optically driven longitudinal strain wave propagating through a diamond single crystal. We also present two DFXM scanning modalities that are new to the XFEL sources: spatial 3D and 2D axial-strain scans with sub-μm spatial resolution. With this progress in XFEL-based DFXM, we discuss new opportunities to study multi-timescale spatiotemporal dynamics of microstructures.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Intrinsic Limits of Charge Carrier Mobilities in Layered Halide Perovskites

Layered halide perovskites have emerged as potential alternatives to three-dimensional (3D) halide perovskites due to their improved stability and larger material phase space, allowing fine tuning of structural, electronic, and optical properties. However, their charge carrier mobilities are significantly smaller than those of 3D halide perovskites, which has a considerable impact on their application in optoelectronic devices. Here, we employ state-of-the-art approaches to unveil the electron-phonon mechanisms responsible for the diminished transport properties of layered halide perovskites. Starting from a prototypical A M X 3 halide perovskite, we model the case of n = 1 and n = 2 layered structures and compare their electronic and transport properties to the 3D reference. The electronic and phononic properties are investigated within density functional theory (DFT) and density functional perturbation theory (DFPT), while transport properties are obtained via the Boltzmann transport equation. The vibrational modes contributing to charge carrier scattering are investigated and associated with polar-phonon scattering mechanisms arising from the long-range Fröhlich coupling and deformation-potential scattering processes. Our investigation reveals that the lower mobilities in layered systems primarily originate from the increased electronic density of states at the vicinity of the band edges, while the electron-phonon coupling strength remains similar. Such an increase is caused by the dimensionality reduction and the break in octahedra connectivity along the stacking direction. Our findings provide a fundamental understanding of the electron-phonon coupling mechanisms in layered perovskites and highlight the intrinsic limitations of the charge carrier transport in these materials. Published by the American Physical Society 2024

Cucco, Bruno (ORCID:0000000331564143)↗
DOE OSTI2024

Cu(II) Stability and UV-Induced Electron Transfer in a Metal–Organic Hybrid: An EPR, DFT, and Crystallographic Characterization of Copper-Doped Zinc Creatininium Sulfate

Single-crystal X-ray diffraction and electron paramagnetic resonance (EPR) spectroscopic experiments, complemented by quantum chemical DFT calculations, were carried out on the copper-doped metal–organic hybrid and Tutton salt analogue zinc creatininium sulfate to determine its crystal structure, to characterize the electronic structure of the doped Cu(II) binding site, and to propose a pathway for an excited-state, proton-coupled electron transfer (PCET) process in UV-exposed crystals. The crystal structure is isomorphous to that of cadmium creatininium sulfate, which has the transition ion, not in direct coordination with the creatinine, but forming a hexahydrate complex, which is bridged to a creatininium through an intervening sulfate ion. The EPR g (2.446, 2.112, 2.082) and copper hyperfine (A Cu : -327, -59.6, 10.8 MHz) tensor parameters are consistent with doped copper replacing host zinc in the metal–hexahydrate complex. These parameters are similar to those observed for copper hexahydrate in doped Tutton salt systems at low temperature, where the unpaired electron occupies mainly the copper 3d x 2 –y 2 orbital. At room temperature in the Tutton systems, vibration couplings stemming from a dynamic Jahn–Teller effect cause tensor averaging which results in a reduction in their maximum g-tensor and hyperfine tensor values. However, like for the doped isomorphous Cd creatinine crystal, the Cu(II) EPR exhibits little, or no room temperature averaging compared to its low temperature pattern. Samples exposed to 254 nm UV light generate a carbon-centered free radical species, characterized by an isotropic g-tensor (g = 2.0029) and an alpha-proton hyperfine coupling (-24 -14 +4 G). These parameters identify it as a creatinine radical cation formed by the oxidative release of one of its C2 methylene hydrogens. DFT calculations confirm the unpaired electronic structures of both the Cu(II) site and free radical. The growth in radical concentration with an increase in the UV exposure time coincides with a decrease in the copper EPR signal, indicating a coupled light-induced oxidation reduction process. A comparison of the crystal structure with the EPR parameters and DFT results provides evidence for a UV-induced PCET.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Classification of electronic nematicity in three-dimensional crystals and quasicrystals

Electronic nematic order has been reported in a rich landscape of materials, encompassing not only a range of intertwined correlated and topological phenomena but also different underlying lattice symmetries. Motivated by these findings, we investigate the behavior of electronic nematicity as the spherical symmetry of three-dimensional (3D) space is systematically lowered by the lattice environment. Here, we consider all 32 crystallographic point groups as well as four major classes of quasicrystalline point groups, given the recent observations of electronic phases of interest in quasicrystalline materials and artificial twisted quasicrystals. Valuable insights are gained by establishing a mapping between the five-component charge-quadrupolar nematic order parameter of the electronic fluid and the 3D tensorial order parameter of nematic liquid crystals. We find that a uniaxial nematic state is only generically realized in polyhedral point groups (icosahedral and cubic), with the nematic director pointing along different sets of rotational symmetry axes. Interestingly, icosahedral point groups are the only ones in which the five nematic order parameter components transform as the same irreducible representation, making them the closest analog of 3D isotropic nematics. In axial point groups, one of the nematic components is always condensed, whereas the other four components decompose into an in-plane and an out-of-plane nematic doublet, resulting in biaxial nematic ground states. Because these two nematic doublets behave as Z q clock order parameters, this allows us to identify the types of crystals and quasicrystals that can host interesting electronic nematic phenomena enabled by the critical properties of the q ≥ 4 clock model, such as emergent continuous nematic fluctuations in 3D, critical phases with quasi-long-range nematic order in two dimensions (2D), and Ashkin-Teller nematicity in 2D.

3-dimensional systems↗
DOE OSTI2026

Revealing the Hidden Third Dimension of Point Defects in Two-Dimensional MXenes

Point defects govern many important functional properties of two-dimensional (2D) materials. However, resolving the three-dimensional (3D) arrangement of these defects in multi-layer 2D materials remains a fundamental challenge, hindering rational defect engineering. Here, we overcome this limitation using an artificial intelligence-guided electron microscopy workflow to map the 3D topology and clustering of atomic vacancies in Ti3C2TX MXene. Our approach reconstructs the 3D coordinates of vacancies across hundreds of thousands of lattice sites, generating robust statistical insight into their distribution that can be correlated with specific synthesis pathways. This large-scale data enables us to classify a hierarchy of defect structures-from isolated vacancies to nanopores-revealing their preferred formation and interaction mechanisms, as corroborated by molecular dynamics simulations. This work provides a generalizable framework for understanding and ultimately controlling point defects across large volumes, paving the way for the rational design of defect-engineered functional 2D materials.

2D materials↗
DOE OSTI2025

Revisiting the assignment of atomic charges in metal oxides based on core-level x-ray photoelectron spectra: The case of Ti in SrTiO3(001)

We demonstrate that assigning formal charges to transition metal (TM) cations based on core-level (CL) x-ray photoemission binding energies in oxides leads to physically inconsistent pictures of electronic structure. O 2p–TM 3d hybridization is well known to result in significant covalency in TM–O bonds, thereby reducing TM cation charges from their fully ionic values. However, the ionic bonding model remains the working paradigm for assigning TM CL features, and the resulting cation charges are often taken to be representative of the material under study. Here, we show that a more physically meaningful way to assign charges is to extract information about charge distributions utilizing Dirac–Hartree–Fock theory to calculate CL spectra from first principles and then use the resulting wave functions to determine charges based on orbital occupancies. TM cation charges can also be determined using density functional theory and Bader population analysis. We illustrate these two methods using the Ti 2p spectrum for SrTiO3(001) and show that the agreement between them is excellent. Significantly, the resulting Ti charge is considerably lower than the formal charge. The high degree of similarity between the Ti 2p spectrum for SrTiO3 and those for the rutile and anatase polymorphs of TiO2 suggests that the charge densities surrounding Ti in the latter materials are similar to that in SrTiO3. Taking a broader perspective, oxides containing other first-row transition metals also exhibit covalent character, leading to TM cation charges lower than the analogous fully ionic values in these materials as well.

Chambers, Scott A. (ORCID:000000025415043X)↗
DOE OSTI2024

pyTriBeam

SAND2025-01899O pyTriBeam is a software tool that creates automated processes for a scanning electron microscope including workflows for 3D serial sectioning dataset collection, high-res image montaging, and support for custom script use. This includes integration for 3D chemical mapping (EDS) and crystallographic (EBSD) data collection with select supported detectors. The application allows end users to setup and run customizable data collection workflows without requiring expertise in programming. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Hovey, Chad↗
DOE OSTI2024

Characterization of Stress-Corrosion-Cracking in Plutonium-Bearing Storage Containers

Introduction • The Integrated Surveillance Program, under the Department of Energy, is responsible for the periodic surveillance of storage containers containing plutonium-bearing materials. • The container-packages are designed to isolate the materials for 50 to 100 years with minimal surveillance. • During monitoring, corrosion-pitting and stress-corrosion-cracking (SCC) has been identified in some of the inner-cans near the weld regions. • SCC through wall penetration would result in an undesired increased risk of leakage. • An investigation is in progress to identify and characterize corrosion events to determine the prevalence of corrosion features and the likelihood of a throughwall breach. • Here, we discuss the characterization efforts carried out by Scanning Electron Microscopy (SEM), including 3D-tomography by Focused Ion Beam (FIB) methods.

Perez, Emmanuel E.↗
DOE OSTI2026

Studying the SBND Cathode Structure

The Short-Baseline Near Detector (SBND) is a Liquid Argon Time Projection Chamber (LArTPC) located at Fermilab. It utilizes electrons ionized by passing particles inside the detector to create 3D reconstructions of interactions. This is achieved by drifting ionized electrons towards the instrumented wire planes. Structurally, the cathode can be mapped using cosmic ray muons by using information of their trajectories and their timing. This study shows that the cathode has rich structure. Though preliminary, this work shows evidence of non-negligible effects and warrants further investigation of these structures which could lead to improved detector simulations and more reliable event reconstructions.

Cataldo, Aedan [Notre Dame U.]↗