Search NASA⌕ Search

SEARCH · Search NASA

Results for “ADIABATIC DEMAGNETIZATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

MANX: A 6D Ionization-Cooling Experiment

Six-dimensional ionization cooling of muons is essential for muon colliders and possibly beneficial for neutrino factories. An experiment to demonstrate six-dimensional ionization cooling using practical apparatus is presented. It exploits recent innovative ideas that may lead to six-dimensional muon-cooling channels with emittance reduction approaching that needed for high-luminosity muon colliders.

43 PARTICLE ACCELERATORS↗

MUCOOL/MICE RF Cavity R and D Programs

We report recent progress on normal conducting RF cavity R and D for the US MUCOOL program and international Muon Ionization Cooling Experiment (MICE)

43 PARTICLE ACCELERATORS↗

A Dogbone Cooling Channel

Muon cooling schemes typically involve placing RF cavities in intense magnetic fields. Ongoing work has shown that this may reduce the maximum RF gradient by a significant factor. A linear cooling channel scheme is presented whereby RF cavities sit in much smaller fields. In addition, a scheme is studied for recirculating muons through this linear cooling channel in order to re-use hardware.

43 PARTICLE ACCELERATORS↗

Open Cavity Solutions to the rf in Magnetic Field Problem

It has been observed that breakdown in an 805 MHz pill-box cavity occurs at much lower gradients as an external axial magnetic field is increased. This effect was not observed with on open iris cavity. It is proposed that this effect depends on the relative angles of the magnetic and maximum electric fields: parallel in the pill-box case; at an angle in the open iris case. If so, using an open iris structure with solenoid coils in the irises should perform even better. A lattice, using this principle, is presented, for use in 6D cooling for a Muon Collider. Experimental layouts to test this principle are proposed.

43 PARTICLE ACCELERATORS↗

Challenge of Muon Cooling Rings

In order to obtain cost effective design for the neutrino factory and a front end of the muon collider compact rings for muon ionization cooling have been proposed in various schemes. Nevertheless muon cooling rings show several difficulties, which make their design a very challenging subject. In order to obtain space necessary for injection/extraction systems, 4 m long straight section has to be matched to low beta cooling section. Adiabatic matching is discussed, which was proposed as a solution for broad momentum deviation.

43 PARTICLE ACCELERATORS↗

Development of Large Aperture PRISM-FFAG Magnet

The magnetic field of three scaled-radial-sector fixed field alternating gradient (FFAG)-magnets has been measured. The measurements results are compared to a three-dimensional field analysis using the TOSCA code; the generated magnetic field agrees satisfactorily with the TOSCA calculation in a range of 0.5%. Tracking simulation with the measured-field map has been performed and compared to that with the TOSCA field map.

36 MATERIALS SCIENCE↗

The Effect of Extending the Length of the Coupling Coils in a Muon Ionization Cooling Channel

RF cavities are used to re-accelerate muons that have been cooled by absorbers that are in low beta regions of a muon ionization cooling channel. A superconducting coupling magnet (or magnets) are around or among the RF cavities of a muon ionization-cooling channel. The field from the magnet guides the muons so that they are kept within the iris of the RF cavities that are used to accelerate the muons. This report compares the use of a single short coupling magnet with an extended coupling magnet that has one or more superconducting coils as part of a muon-cooling channel of the same design as the muon ionization cooling experiment (MICE). Whether the superconducting magnet is short and thick or long and this affects the magnet stored energy and the peak field in the winding. The magnetic field distribution also affects is the muon beam optics in the cooling cell of a muon cooling channel.

43 PARTICLE ACCELERATORS↗

Ferromagnetism and superparamagnetism of ZnCoO:H nanocrystals

ZnCoO:H nanocrystals are weak ferromagnetic at room temperature with a small coercivity and a small remanence, whereas ZnCoO nanocrystals are paramagnetic. The thermal irreversibility of zero-field cooling and field cooling magnetizations of ZnCoO:H nanocrystals corresponds to the existence of superparamagnetism due to the nanosize effect. X-ray photoelectron spectra show the incorporation of Co{sup 2+} ions inside the ZnO lattice without changing the wurtzite structure. Our data suggest that hydrogen can induce ferromagnetism in ZnCoO and that ferromagnetic ZnCoO:H crystals with small particle size can show the superparamagnetism.

36 MATERIALS SCIENCE↗

Trapped Ion Quantum Computation by Adiabatic Passage

We propose a new universal quantum computation scheme for trapped ions in thermal motion via the technique of adiabatic passage, which incorporates the advantages of both the adiabatic passage and the model of trapped ions in thermal motion. Our scheme is immune from the decoherence due to spontaneous emission from excited states as the system in our scheme evolves along a dark state. In our scheme the vibrational degrees of freedom are not required to be cooled to their ground states because they are only virtually excited. It is shown that the fidelity of the resultant gate operation is still high even when the magnitude of the effective Rabi frequency moderately deviates from the desired value.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Recent advances in the microstructure design of materials for near room temperature magnetic cooling (invited)

Successful operation of a magnetic cooling device depends crucially on the performance of active magnetic refrigerant material. Extensive research activity has been concentrated on optimizing the magnetic properties of these materials by chemical composition modification. Here, it is shown how the design of appropriate microstructure can be used to control the magnetic properties as well as mechanical stability of refrigerant materials experiencing a first-order magnetic phase transition. In particular, introducing porosity in LaFe{sub 13-x}Si{sub x} alloys provides long-term stability by sacrificing only a small fraction of the magnetocaloric effect and results in the desired reduction of the magnetic and thermal hysteresis by a factor of 5, as compared to bulk alloys. Reducing crystallite size down to the nanometer range is shown to substantially lower magnetic hysteresis. On the other hand, the magnetocaloric effect is weakened by about 40% and 60% in alloys with grain size of 70 and 44 nm, respectively.

36 MATERIALS SCIENCE↗

Structure and exchange bias of Ni{sub 50}Mn{sub 37}Sn{sub 13} ribbons

Ni{sub 50}Mn{sub 37}Sn{sub 13} ribbons were produced by the melt-spinning method. Structure and magnetic measurements on the Ni{sub 50}Mn{sub 37}Sn{sub 13} ribbons indicated that it is ferromagnetic below 340 K and undergoes an austenitic-to-martensitic phase transition just below room temperature. The austenitic phase has the cubic L2{sub 1} structure, with the excess manganese atoms occupying the 4(b) sites. The martensitic phase has an orthorhombic structure. With increasing applied magnetic field, the martensite start temperature M{sub s} and martensite finish temperature M{sub f} shift to lower temperatures because of the field-induced phase transition. The exchange-bias effect is observed and strongly varied with different cooling fields at low temperature. At 5 K, the exchange-bias field reaches a maximum of 290 Oe when the cooling field increases to 200 Oe, and then reduces sluggishly with further increase of the cooling field because of weakening of exchange coupling between antiferromagnetic and ferromagnetic interfaces.

36 MATERIALS SCIENCE↗

Observation of spin-glass behavior in nickel adsorbed few layer graphene

Nickel-adsorbed graphene was prepared by first synthesizing graphite oxide (GO) by modified Hummers' method and then reducing a solution containing both GO and Ni{sup 2+}. Energy dispersive X-ray spectroscopy analysis showed 31 at. % nickel was present. Magnetization measurements under both dc and ac magnetic fields were carried out in the temperature range 2 K to 300 K. The zero field cooled and field cooled magnetization data showed a pronounced irreversibility at a temperature around 20 K. The analysis of the ac susceptibility data was carried out by both Vogel-Fulcher as well as power law. From dynamic scaling analysis, the microscopic flipping time {tau}{sub 0}{approx}10{sup -13}s and critical exponent z{nu}=5.9{+-}0.1 were found, indicating the presence of conventional spin glass in the system. The spin glass transition temperature was estimated as 19.5 K. Decay of thermoremanent magnetization was explained by stretched exponential function with a value of the exponent as 0.6. From the results, it is concluded that nickel adsorbed graphene behaves like a spin-glass.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Magnetic and magnetocaloric properties of bulk dysprosium chromite

In this work, a polycrystalline bulk DyCrO{sub 3} sample was prepared by a solution route and the structural and magnetic properties were investigated. The phase purity and ionic valence state of the DyCrO{sub 3} sample were determined by x-ray diffraction/Raman spectroscopy and x-ray photoelectron spectroscopy, respectively. The AC and DC magnetization measurements revealed the onset of antiferromagnetic order at 146 K with an effective moment of 8.88 μ{sub B}. Isothermal magnetization measurements of this material are presented for the first time, showing a peak in the coercive field at 80 K that is explained by the competition between the paramagnetic Dy{sup 3+} and Cr{sup 3+} sublattices. DyCrO{sub 3} was found to display a large magnetocaloric effect (8.4 J/kg K) and relative cooling power (217 J/kg) at 4 T applied field, which renders DyCrO{sub 3} useful for magnetic refrigeration between 5 K and 30 K.

36 MATERIALS SCIENCE↗

Development of a He{sup 3}−He{sup 4} sub Kelvin active magnetic regenerative refrigerator (AMRR) with no moving parts

Current state of the art particle and photon detectors such as Transition Edge Sensors (TES) and Microwave Kinetic Inductance Detectors (MKID) use large arrays of sensors or detectors for space science missions. As the size of these space science detectors increases, future astrophysics missions will require sub-Kelvin cooling over larger areas. This leads to not only increased cooling power requirements, but also a requirement for distributed sub-Kelvin cooling. We propose an active Magnetic Regenerative Refrigerator (AMRR) that uses a Superfluid Magnetic Pump (SMP) to circulate liquid He{sup 3}−He{sup 4} through a magnetic regenerator to provide the necessary cooling at sub-Kelvin temperatures. Such system will be capable of distributing the cooling load to a relatively large array of objects. One advantage of using a fluid for heat transfer in such systems is to isolate components such as the superconducting magnets from detectors that are sensitive to magnetic fields. Another advantage of the proposed tandem AMRR is that it does not need Gas Gap Heat Switches (GGHS) to transfer heat during various stages of the magnetic cooling. Our proposed system consists of four superconducting magnets, one superleak, and three heat exchangers. It will operate continuously with no moving parts and it will be capable of providing the necessary cooling at sub-Kelvin temperatures for future space science applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of structural disorder on the magnetocaloric properties of Ni-Mn-Sn alloy

The magnetic and magnetocaloric properties of Ni{sub 50}Mn{sub 36.5}Sn{sub 13.5} Heusler alloy has been studied by varying the duration of annealing (0, 6, 12, 18, and 24 h) at 1173 K. The atomic ordering increases, martensitic transition (MT) becomes sharper and exchange bias field increases with increasing annealing time. The sample annealed for 24 h has shown a large magnetic entropy change (ΔS{sub M}) near its MT. But, the net refrigerant capacity at the MT of 12 h annealed sample is larger than the former one. We have discussed these results in the context of structural disorder and the ferro/antiferro correlations present in these alloy systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin reorientation transition and near room-temperature multiferroic properties in a W-type hexaferrite SrZn{sub 1.15}Co{sub 0.85}Fe{sub 16}O{sub 27}

In this Letter, we investigate the magnetic and multiferroic properties of a W-type hexaferrite SrZn{sub 1.15}Co{sub 0.85}Fe{sub 16}O{sub 27}. Due to the strong planar contribution to the anisotropy provided by Co{sup 2+} ions, this hexaferrite shows a spin reorientation transition from easy-axis to easy-cone at 302 K, which is different from the onset temperature of ferroelectric polarization, 275 K. By applying magnetic field, a remarkable drop of polarization is observed, suggesting a large magnetoelectric effect in this multiferroics. The difference between spin reorientation and ferroelectric phase transition temperature as well as the origin of magnetoelectric effect are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Near fifty percent sodium substituted lanthanum manganites—A potential magnetic refrigerant for room temperature applications

Nearly half of lanthanum sites in lanthanum manganites were substituted with monovalent ion-sodium and the compound possessed distorted orthorhombic structure. Ferromagnetic ordering at 300 K and the magnetic isotherms at different temperature ranges were analyzed for estimating magnetic entropy variation. Magnetic entropy change of 1.5 J·kg{sup −1}·K{sup −1} was observed near 300 K. An appreciable magnetocaloric effect was also observed for a wide range of temperatures near 300 K for small magnetic field variation. Heat capacity was measured for temperatures lower than 300 K and the adiabatic temperature change increases with increase in temperature with a maximum of 0.62 K at 280 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗