Search NASA⌕ Search

SEARCH · Search NASA

Results for “AERODYNAMIC HEATING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1960

A Radiant Heater to Simulate Aerodynamic Heating in a Wind Tunnel

A recently developed radiant-heating test technique for simulation of aerodynamic heating in wind tunnel is describes. The heating device, which utilized quartz-tube lamps, was operated successfully while exposed directly to a supersonic airstream. Tests were made on a calibration panel, and experimental temperature and pressure data are presented. Results indicate that initial heating rates of about 26 Btu/(sq ft) (sec) are obtainable at a distance of 12 inches from the heater. Further applications of the basic design are discussed briefly.

Trussell, Donald H.↗
NASA NTRS1975

Aerodynamic heating to the gaps and surfaces of simulated reusable-surface-insulation tile arrays in turbulent flow at Mach 6.6

An experimental investigation was made on a simulated reusable-surface-insulation tile array in a turbulent boundary layer to determine aerodynamic-heating distributions representative of those expected on the surface of the shuttle orbiter during earth entry due to the presence of longitudinal and transverse surface gaps. The tests were conducted in an 8-foot high-temperature structures tunnel in a test medium of methane-air combustion products at a nominal Mach number of 6.6 and over a free-stream Reynolds number range from 2,000,000 to 4,900,000 per meter (600,000 to 1,500,000 per foot). The results were used to assess the aerodynamic heating effects produced by parameters that include gap width, boundary-layer displacement thickness, in-line and staggered tile arrangement, and tile protrusion.

Weinstein, I.↗
NASA NTRS2001

Thermal Analysis and Design of Multi-layer Insulation for Re-entry Aerodynamic Heating

The combined radiation/conduction heat transfer in high-temperature multi-layer insulations was modeled using a finite volume numerical model. The numerical model was validated by comparison with steady-state effective thermal conductivity measurements, and by transient thermal tests simulating re-entry aerodynamic heating conditions. A design of experiments technique was used to investigate optimum design of multi-layer insulations for re-entry aerodynamic heating. It was found that use of 2 mm foil spacing and locating the foils near the hot boundary with the top foil 2 mm away from the hot boundary resulted in the most effective insulation design. A 76.2 mm thick multi-layer insulation using 1, 4, or 16 foils resulted in 2.9, 7.2, or 22.2 percent mass per unit area savings compared to a fibrous insulation sample at the same thickness, respectively.

Daryabeigi, Kamran↗
NASA NTRS1974

Non-equilibrium stagnation region aerodynamic heating of hypersonic glide vehicles

A simple method of predicting aerodynamic heating and corresponding radiation equilibrium surface temperature-time histories for critical locations on space shuttle orbiter-type vehicles is presented. The method is based on a generalization of correlation equations developed earlier by Rosner for predicting the energy transfer and radiation equilibrium temperatures of surfaces with arbitrary catalytic activity and total hemispheric emittance. Recently obtained experimental data for O and N atom recombination probabilities on candidate material surfaces above 1000 K are used to assess nonequilibrium effects for a range of nose radii and a specific space shuttle re-entry trajectory. It is concluded that low catalytic activity will be especially important in locations of large effective nose radii by both increasing oxidation-resistant coating lifetime and reducing energy transfer into the vehicle.

Rosner, D. E.↗
NASA NTRS1958

Free-Flight Investigation of Aerodynamic Heat Transfer to a Simulated Glide-Rocket Shape at Mach Numbers up to 10

Heat-transfer measurements were made on a simulated glide-rocket shape in free flight at Mach numbers up to 10 and free-stream Reynolds numbers of 2 x 10 based on distance along surface from apex and 3 x 10 based on nominal leading-edge diameter. The model simulated the bottom of a 75 deg delta wing at 8O deg angle of attack. The data indicated that for the test conditions a modified three-dimensional stagnation-point theory will predict to reasonable engineering accuracy the heating on a highly swept wing leading edge, the heating being reduced by sweep by the 3/2 power of the cosine of the sweep angle. The data also indicate that laminar heating rates over the windward surface of a highly swept flat glider wing at moderate angles of attack can be predicted with reasonable engineering accuracy by flat-plate theory using wedge local flow conditions and basing Reynolds numbers on lengths from the wing leading edge parallel to the surface center line.

FREE FLIGHT↗
NASA NTRS1989

Coupled fluid-thermal-structural analysis for aerodynamically heated structures

A finite element approach for integrated fluid-thermal-structural analysis of aerodynamically heated structures is described. The approach is used to solve: (1) the Navier-Stokes equations for the aerodynamic flow, (2) the energy equation of the structure for the temperature response, and (3) the quasi-static equilibrium equations of the structure for the structural response. Coupling between the three disciplines is demonstrated using two applications: Mach 7 flow over a panel and Mach 8 shock-shock interference on a cylinder.

Dechaumphai, Pramote↗
NASA NTRS1972

A method for calculating aerodynamic heating on sounding rocket tangent ogive noses

A method is presented for calculating the aerodynamic heating and shear stresses at the wall for tangent ogive noses that are slender enough to maintain an attached nose shock through that portion of flight during which heat transfer from the boundary layer to the wall is significant. The lower entropy of the attached nose shock combined with the inclusion of the streamwise pressure gradient yields a reasonable estimate of the actual flow conditions. Both laminar and turbulent boundary layers are examined and an approximation of the effects of (up to) moderate angles-of-attack is included in the analysis. The analytical method has been programmed in FORTRAN 4 for an IBM 360/91 computer.

Wing, L. D.↗
NASA NTRS1973

A method for calculating aerodynamic heating on sounding rocket tangent ogive noses.

A method is presented for calculating the aerodynamic heating and shear stresses at the wall for tangent ogive noses that are slender enough to maintain an attached nose shock through that portion of flight during which heat transfer from the boundary layer to the wall is significant. The lower entropy of the attached nose shock combined with the inclusion of the streamwise pressure gradient yields a reasonable estimate of the actual flow conditions. Both laminar and turbulent boundary layers are examined and an approximation of the effects of (up to) moderate angles-of-attack is included in the analysis. The analytical method has been programmed in FORTRAN IV for an IBM 360/91 computer.

Wing, L. D.↗
NASA NTRS1993

Aerodynamic heating in the vicinity of hypersonic, axisymmetric, shock-wave boundary-layer interactions

Aerodynamic heating rates are calculated from time-dependent temperature measurements in the vicinity of shock-wave boundary-layer interactions due to conical compression ramps on an axisymmetric body. The data were acquired at the Ohio State University Aeronautical and Astronautical Research Laboratory and at the Air Force Flight Dynamics Laboratory at Mach numbers of 6 and 10. The model is a cylindrical body with a 10 deg conical nose. Conical ramps with half-angles of 10, 20, 25, 30, and 35 deg serve as shock-wave generators. Flowfield surveys are made in the vicinity of the ramp vertices, separation points, and reattachment points. Experimental results quantify temperature response and the resulting heat transfer rates as a function of ramp angle, Reynolds number and freestream Mach number. The temperature responses within the flowfield appear to be steady-state for all angles and all Reynolds numbers, and hence, the heat transfer rates appear to be steady-state.

Flanagan, M. J., Jr.↗