Search NASA⌕ Search

SEARCH · Search NASA

Results for “AMMONIUM COMPOUND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Isotopic analyses of nitrogenous compounds from the Murchison meteorite: ammonia, amines, amino acids, and polar hydrocarbons

The combined volatile bases (ammonia, aliphatic amines, and possibly other bases), ammonia, amino acids, and polar hydrocarbons were prepared from the Murchison meteorite for isotopic analyses. The volatile bases were obtained by cryogenic transfer after acid-hydrolysis of a hot-water extract and analyzed by combined gas chromatography-mass spectrometry of pentafluoropropionyl derivatives. The aliphatic amines present in this preparation comprise a mixture that includes both primary and secondary isomers through C5 at a total concentration of > or = 100 nmoles g-1. As commonly observed for meteoritic organic compounds, almost all isomers through C5 are present, and the concentrations within homologous series decrease with increasing chain length. Ammonia was chromatographically separated from the other volatile bases and found at a concentration of 1.1-1.3 micromoles g-1 meteorite. The ammonia analyzed includes contributions from ammonium salts and the hydrolysis of extractable organic compounds, e.g., carboxamides. Stable isotope analyses showed the volatile bases to be substantially enriched in the heavier isotopes, relative to comparable terrestrial compounds delta D < or = +1221%; delta 13C = +22%; delta 15N = +93%). Ammonia, per se, was found to have a somewhat lower delta 15N value (+69%) than the total volatile bases; consequently, a higher delta 15N (>93%) can be inferred for the other bases, which include the amines. Solvent-extractable polar hydrocarbons obtained separately were found to be enriched in 15N (delta 15N = +104%). Total amino acids, prepared from a hydrolyzed hot-water extract by cation exchange chromatography, gave a delta 15N of +94%, a value in good agreement with that obtained previously. Nitrogen isotopic data are also given for amino acid fractions separated chromatographically. The delta 15N values of the Murchison soluble organic compounds analyzed to date fall within a rather narrow range (delta 15N = +94 +/- 8%), an observation consistent with their formation, or formation of their precursors, by interstellar chemistry.

Non-NASA Center↗
DOE OSTI2020

On Aerosol Liquid Water and Sulfate Associations: The Potential for Fine Particulate Matter Biases

In humid locations of the Eastern U.S., sulfate is a surrogate for aerosol liquid water (ALW), a poorly measured particle constituent. Regional and seasonal variation in ALW–sulfate relationships offers a potential explanation to reconcile epidemiology and toxicology studies regarding particulate sulfur and health endpoints. ALW facilitates transfer of polar species from the gas phase to the particle phase and affects particle pH and metal oxidation state. Though abundant and a potential indicator of adverse health endpoints, ALW is largely removed in most particulate matter measurement techniques, including in routine particulate matter (PM 2.5 ) networks that use federal reference method (FRM) monitors, which are used in epidemiology studies. We find that in 2004, a typical year in the available record, ambient ALW mass is removed during sampling and filter equilibration to standard laboratory conditions at most (94%) sites, up to 85% of the ambient water mass. The removal of ALW can induce the evaporation of other semi-volatile compounds present in PM 2.5 , such as ammonium nitrate and numerous organics. This produces an artifact in the PM mass measurements that is, importantly, not uniform in space or time. This suggests that PM 2.5 epidemiology studies that exclude ALW are biased. This work provides a plausible explanation to resolve multi-decade discrepancies regarding ambient sulfate and health impacts in some epidemiological and toxicological studies

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2023

Soluble Organic Matter Molecular Atlas of Ryugu Reveals Cold Hydrothermalism on C-Type Asteroid Parent Body

The sample from the near-Earth carbonaceous asteroid (162173) Ryugu is analyzed in the context of carbonaceous meteorites soluble organic matter. The analysis of soluble molecules of samples collected by the Hayabusa2 spacecraft shines light on an extremely high molecular diversity on the C-type asteroid. Sequential solvent extracts of increasing polarity of Ryugu samples are analyzed using mass spectrometry with complementary ionization methods and structural information confirmed by nuclear magnetic resonance spectroscopy. Here we show a continuum in the molecular size and polarity, and no organomagnesium molecules are detected, reflecting a low temperature and water-rich environment on the parent body approving earlier mineralogical and chemical data. High abundance of sulfidic and nitrogen rich compounds as well as high abundance of ammonium ions confirm the water processing. Polycyclic aromatic hydrocarbons are also detected in a structural continuum of carbon saturations and oxidations, implying multiple origins of the observed organic complexity, thus involving generic processes such as earlier carbonization and serpentinization with successive low temperature aqueous alteration.

Asteroids, comets and Kuiper belt↗
DOE OSTI2021

Controlled Conversion of Sodium Metal From Nuclear Systems to Sodium Chloride

A series of three bench-scale experiments was performed to investigate the conversion of sodium metal to sodium chloride via reactions with non-metal and metal chlorides. Specifically, batches of molten sodium metal were separately contacted with ammonium chloride and ferrous chloride to form sodium chloride in both cases along with iron in the latter case. Additional ferrous chloride was added to two of the three batches to form low melting point consolidated mixtures of sodium chloride and ferrous chloride, whereas consolidation of a sodium-chloride product was performed in a separate batch. Samples of the products were characterized via X-ray diffraction to identify attendant compounds. The reaction of sodium metal with metered ammonium chloride particulate feeds proceeded without reaction excursions and produced pure colorless sodium chloride. The reaction of sodium metal with ferrous chloride yielded occasional reaction excursions as evidenced by temperature spikes and fuming ferrous chloride, producing a dark salt-metal mixture. This investigation into a method for controlled conversion of sodium metal to sodium chloride is particularly applicable to sodium containing elevated levels of radioactivity—including bond sodium from nuclear fuels—in remote-handled inert-atmosphere environments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1992

Hydrothermal organic synthesis experiments

The serious scientific debate about spontaneous generation which raged for centuries reached a climax in the nineteenth century with the work of Spallanzani, Schwann, Tyndall, and Pasteur. These investigators demonstrated that spontaneous generation from dead organic matter does not occur. Although no aspects of these experiments addressed the issue of whether organic compounds could be synthesized abiotically, the impact of the experiments was great enough to cause many investigators to assume that life and its organic compounds were somehow fundamentally different than inorganic compounds. Meanwhile, other nineteenth-century investigators were showing that organic compounds could indeed be synthesized from inorganic compounds. In 1828 Friedrich Wohler synthesized urea in an attempt to form ammonium cyanate by heating a solution containing ammonia and cyanic acid. This experiment is generally recognized to be the first to bridge the artificial gap between organic and inorganic chemistry, but it also showed the usefulness of heat in organic synthesis. Not only does an increase in temperature enhance the rate of urea synthesis, but Walker and Hambly showed that equilibrium between urea and ammonium cyanate was attainable and reversible at 100 C. Wohler's synthesis of urea, and subsequent syntheses of organic compounds from inorganic compounds over the next several decades dealt serious blows to the 'vital force' concept which held that: (1) organic compounds owe their formation to the action of a special force in living organisms; and (2) forces which determine the behavior of inorganic compounds play no part in living systems. Nevertheless, such progress was overshadowed by Pasteur's refutation of spontaneous generation which nearly extinguished experimental investigations into the origins of life for several decades. Vitalism was dealt a deadly blow in the 1950's with Miller's famous spark-discharge experiments which were undertaken in the framework of the Oparin and Haldane hypotheses concerning the origin of life. These hypotheses were constructed on some basic assumptions which included a reduced atmosphere, and a low surface temperature for the early Earth. These ideas meshed well with the prevailing hypothesis of the 1940's and 50's that the Earth had formed through heterogeneous accretion of dust from a condensing solar nebula. Miller's experiments were extremely successful, and were followed by numerous other experiments by various investigators who employed a wide variety of energy sources for abiotic synthesis including spark discharges, ultra-violet radiation, heat, shock waves, plasmas, gamma rays, and other forms of energy. The conclusion reached from this body of work is that energy inputs can drive organic synthesis from a variety of inorganic starting materials.

Shock, Everett L.↗
DOE OSTI2022

Metal–Oxo Cluster Formation Using Ammonium and Sulfate to Differentiate M IV (Th, U, Ce) Chemistries

Isolating isostructural compounds of tetravalent metals M IV (Zr, Hf, Ce, Th, U, Pu, Np) improves our understanding of metal hydrolysis and coordination behavior across the periodic table. These metals form polynuclear clusters typified by the hexamer [M IV 6 O 4 (OH) 4 ] 12+ . Exploiting the ammonium M IV -sulfate (Ce IV , Th IV , and U IV ) phase space targeting rapid crystallization, we isolate the common hexamer [M IV 6 (OH) 4 (O) 4 ] 12+ but with different numbers of capping sulfates and water molecules for Ce IV , Th IV , and U IV . Furthermore, these phases allowed a direct comparison of bonding trends across the series. Upon cocrystallization with the hexamers, higher complex structures can be identified. Thorium features assemblies with monomer-linked hexamer chains. Uranium features assemblies with sulfate-bridged hexamers and the supramolecular assembly of 14 hexamers into the U 84 , [U 6 (OH) 4 (O) 4 ) 14 (SO 4 ) 120 (H 2 O) 42 ] 72– . Last, cerium showcases the isolation from monomers to the Ce 62 , [Ce 62 (OH) 30 (O) 58 (SO 4 ) 71 (H 2 O) 33.25 ] 41– . Furthermore, small-angle X-ray scattering (room temperature) shows ammonium-induced cluster assembly for Ce IV but minimal reactivity for U IV and Th IV . In this study, because the phases crystallized at elevated temperature demonstrates favorable cluster assembly, these solution phase results were surprising and suggest some other characteristics such as Ce’s facile redox behavior, contributes to its solution-phase speciation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Thorium Bis‐Salophen Trimers as Anion Detectors and Binding Agents

Bis‐salophen ligands are the condensation product of a tetramine and a salicylaldehyde derivative. They feature two binding sites, both of which are tetradentate with mixed O/N donor atoms. Reaction with the ligand precursor and thorium nitrate tetrahydrate forms a 3:3 metal‐to‐ligand trimer with a ΔΔΔ‐chirality confirmed by X‐ray crystallography of a racemic single crystal. The structure has a pore in the center of the triangular structure measuring 6.22 Å at its narrowest point. This compound is air‐ and water‐stable as well as soluble in organic solvents. Here, this compound was screened with a series of tetrabutyl ammonium halide salts, and tetrabutylammonium (TBA) chloride showed the strongest binding to the complex. After the addition of 2 equivalents of TBACl, the complex and salt precipitate out of solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1970

Intumescent Coatings as Fire Retardants

The development of fire-retardant coatings to protect surfaces which may be exposed to fire or extreme heat is a subject of intense interest to many industries. A fire-retardant paint has been developed which represents a new chemical approach for preparing intumescent coatings, and potentially, is very important to fire-prevention authorities. The requirements for a superior coating include ease of application, suitability to a wide variety of surfaces and finishes, and stability over an extended period of time within a broad range of ambient temperature and humidity conditions. These innovative coatings, when activated by the heat of a fire, react to form a thick, low-density, polymeric coating or char layer. Water vapor and sulphur dioxide are released during the intumescent reaction. Two fire-protection mechanisms thus become available: (1) the char layer retards the flow of heat, due to the extremely low thermal conductivity; and (2) water vapor and sulfur dioxide are released, providing fire quenching properties. Still another mechanism functions in cases where the char, by virtue of its high oxidation resistance and low thermal conductivity, reaches a sufficiently high temperature to re-radiate much of the incident heat load. The coatings consist of dispersions of selective salts of a nitro-amino-arornatic compound. Specifically, para-nitroaniline bisulfate and the ammonium salt of para-nitroaniline-ortho sulphuric acid (2-amino-5-nitrobenzenesulphuric acid) are used. Suitable vehicles are cellulose nitrate of lacquer grade, a nitrite-phenolic modified rubber, or epoxy-polysulfide copolymer. Three separate formulations have been developed. A solvent is usually employed, such as methylethyl ketone, butyl acetate, or toluene, which renders the coatings suitably thin and which evaporates after the coatings are applied. Generally, the intumescent material is treated as insoluble in the vehicle, and is ground and dispersed in the vehicle and solvent like an ordinary coating pigment. The char found on intumescence is better in terms of yield and physical properties than chars obtained from many previously known intumescent materials. Prior to intumescence, the coating has a density of 85 pounds per cubic foot. After intumescence, the density is approximately 0.3 pounds per cubic loot. The linear expansion of the coatings ranges from 70 to 200 times the applied coating thickness.

Parker, J. A.↗
NASA NTRS2022

Measurement report: Closure Analysis of Aerosol–cloud Composition in Tropical Maritime Warm Convection

Cloud droplet chemical composition is a key observable property that can aid understanding of how aerosols and clouds interact. As part of the Clouds, Aerosols and Monsoon Processes – Philippines Experiment (CAMP2Ex), three case studies were analyzed involving collocated airborne sampling of relevant clear and cloudy air masses associated with maritime warm convection. Two of the cases represented a polluted marine background, with signatures of transported East Asian regional pollution, aged over water for several days, while the third case comprised a major smoke transport event from Kalimantan fires. Sea salt was a dominant component of cloud droplet composition, in spite of fine particulate enhancement from regional anthropogenic sources. Furthermore, the proportion of sea salt was enhanced relative to sulfate in rainwater and may indicate both a propensity for sea salt to aid warm rain production and an increased collection efficiency of large sea salt particles by rain in subsaturated environments. Amongst cases, as precipitation became more significant, so too did the variability in the sea salt to (non-sea salt) sulfate ratio. Across cases, nitrate and ammonium were fractionally greater in cloud water than fine-mode aerosol particles; however, a strong covariability in cloud water nitrate and sea salt was suggestive of prior uptake of nitrate on large salt particles. A mass-based closure analysis of non-sea salt sulfate compared the cloud water air-equivalent mass concentration to the concentration of aerosol particles serving as cloud condensation nuclei for droplet activation. While sulfate found in cloud was generally constrained by the sub-cloud aerosol concentration, there was significant intra-cloud variability that was attributed to entrainment – causing evaporation of sulfate-containing droplets –and losses due to precipitation. In addition, precipitation tended to promote mesoscale variability in the sub-cloud aerosol through a combination of removal, convective downdrafts, and dynamically driven convergence. Physical mechanisms exerted such strong control over the cloud water compositional budget that it was not possible to isolate any signature of chemical production/loss using in-cloud observations. The cloud-free environment surrounding the non-precipitating smoke case indicated sulfate enhancement compared to convective mixing quantified by a stable gas tracer; however, this was not observed in the cloud water (either through use of ratios or the mass closure), perhaps implying that the warm convective cloud timescale was too short for chemical production to be a leading-order budgetary term and because precursors had already been predominantly exhausted. Closure of other species was truncated by incomplete characterization of coarse aerosol (e.g., it was found that only 10 %–50% of sea salt mass found in cloud was captured during clear-air sampling) and unmeasured gasphase abundances affecting closure of semi-volatile aerosol species (e.g., ammonium, nitrate and organic) and soluble volatile organic compound contributions to total organic carbon in cloud water.

Ewan Crosbie↗
NASA NTRS1983

Methylhydrazinium nitrate

Methylhydrazinium nitrate was synthesized by the reaction of dilute nitric acid with methylhydrazine in water and in methanol. The white needles formed are extremely hygroscopic and melt at 37.5-40.5 C. The IR spectrum differs from that reported elsewhere. The mass spectrum exhibited no parent peak at 109 m/z, and thermogravimetric analysis indicated that the compound decomposed slowly at 63-103 C to give ammonium and methylammonium nitrate. The density is near 1.55 g/cu cm.

Lawton, E. A.↗
DOE OSTI2022

Correlating Broadband Photoluminescence with Structural Dynamics in Layered Hybrid Halide Perovskites

The emission of white light from a single material is atypical and is of interest for solid-state lighting applications. Broadband light emission has been observed in some layered perovskite derivatives, A 2 PbBr 4 (A = R-NH 3 + ), and correlates with static structural distortions corresponding to out-of-plane tilting of the lead bromide octahedra. While materials with different organic cations can yield distinct out-of-plane tilts, the underlying origin of the octahedral tilting remains poorly understood. Using high energy resolution (e.g., quasi-elastic) neutron scattering, this contribution details the rotational dynamics of the organic cations in A 2 PbBr 4 materials where A = n-butylammonium (nBA), 1,8-diaminooctammonium (ODA), and 4-aminobutyric acid (GABA). The organic cation dynamics differentiate (nBA) 2 PbBr 4 from (ODA)PbBr 4 or (GABA) 2 PbBr 4 in that the larger spatial extent of dynamics of nBA yields a larger effective cation radius. The larger effective volume of the nBA cation in (nBA) 2 PbBr 4 yields a closer to ideal A-site geometry, preventing the out-of-plane tilt and broadband luminescence. In all three compounds, we observe hydrogen dynamics attributed to rotation of the ammonium headgroup and at a time scale faster than the white light photoluminescence studied by time-correlated single photon counting spectroscopy. This supports a previous assignment of the broadband emission as resulting from a single ensemble, such that the emissive excited state experiences many local structures faster than the emissive decay. Furthermore, the findings presented here highlight the role of the organic cation and its dynamics in hybrid organic–inorganic perovskites and white light emission.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1973

Some environmental considerations relating to the interaction of the solid rocket motor exhaust with the atmosphere: Predicted chemical composition of exhaust species and predicted conditions for the formation of HCl aerosol

The exhaust products of a solid rocket motor using as propellant 14% binder, 16% aluminum, and 70% (wt) ammonium perchlorate consist of hydrogen chloride, water, alumina, and other compounds. The equilibrium and some frozen compositions of the chemical species upon interaction with the atmosphere were computed. The conditions under which hydrogen chloride interacts with the water vapor in humid air to form an aerosol containing hydrochloric acid were computed for various weight ratios of air/exhaust products. These computations were also performed for the case of a combined SRM and hydrogen-oxygen rocket engine. Regimes of temperature and relative humidity where this aerosol is expected were identified. Within these regimes, the concentration of HCL in the aerosol and weight fraction of aerosol to gas phase were plotted. Hydrochloric acid aerosol formation was found to be particularly likely in cool humid weather.

Rhein, R. A.↗
NASA NTRS1982

Sterilizable Binder Is Stable at 135 degrees C

Polyurethane binder for solid propellants endures heat sterilization without decomposition based on an ester diol. Binder resists oxidation under prolonged exposure to 135 degrees C temperature, low enough in viscosity to be handled easily during processing, and readily mixed with oxidizers, such as ammonium perchlorate. Polyurethane is also suitable material for encapsulants, potting compounds, and coatings that must be sterilized.

Kalfayan, S. H.↗
NASA NTRS2024

Sublimation and Infrared Spectral Properties of Ammonium Cyanide

The ammonium ion (NH 4 + ) has been suggested to be present in interstellar ices and has been observed on the surfaces of planetary bodies using infrared (IR) spectroscopy as the primary means of identification. Evidence for several ammonium salts has also been found in the dust and surface ices of comet 67P/Churyumov-Gerasimenko. Here we present a laboratory study of ammonium cyanide (NH 4 CN) and report on several properties of this compound, measured with higher accuracy than in previous reports, including its IR band strengths and optical constants for use in quantifying its abundance in interstellar and planetary ices. We also report the first measurements since 1882 of NH 4 CN vapor pressures, sublimation fluxes, and sublimation enthalpy measured at temperatures relevant to subliming cometary ices (134–155 K). The density and refractive index of NH 4 CN at 125 K and the sublimation enthalpy and vapor pressures of NH 3 at ~100 K are also reported.

Ices↗
DOE OSTI2024

Enhancing characterization of organic nitrogen components in aerosols and droplets using high-resolution aerosol mass spectrometry

Abstract. This study aims to enhance the understanding and application of the Aerodyne high-resolution aerosol mass spectrometer (HR-AMS) for the comprehensive characterization of organic nitrogen (ON) compounds in aerosol particles and atmospheric droplets. To achieve this goal, we analyzed 75 N-containing organic compounds, representing a diverse range of ambient non-organonitrate ON (NOON) types, including amines, amides, amino acids, N heterocycles, protein, and humic acids. Our results show that NOON compounds can produce significant levels of NHx+ and NOx+ ion fragments, which are typically recognized as ions representative of inorganic nitrogen species. We also identified the presence of CH2N+ at m/z = 28.0187, an ion fragment rarely quantified in ambient datasets due to substantial interference from N2+. As a result, the utilization of an updated calibration factor of 0.79 is necessary for accurate NOON quantification via the HR-AMS. We also assessed the relative ionization efficiencies (RIEs) for various NOON species and found that the average RIE for NOON compounds (1.52 ± 0.58) aligns with the commonly used default value of 1.40 for organic aerosol. Moreover, through a careful examination of the HR-AMS mass spectral features of various NOON types, we propose fingerprint ion series that can aid the NOON speciation analysis. For instance, the presence of CnH2n+2N+ ions is closely linked with amines, with CH4N+ indicating primary amines, C2H6N+ suggesting secondary amines, and C3H8N+ representing tertiary amines. CnH2nNO+ ions (especially for n values of 1–4) are very likely derived from amides. The co-existence of three ions, C2H4NO2+, C2H3NO+, and CH4NO+, serves as an indicator for the presence of amino acids. Additionally, the presence of CxHyN2+ ions indicates the occurrence of 2N-heterocyclic compounds. Notably, an elevated abundance of NH4+ is a distinct signature for amines and amino acids, as inorganic ammonium salts produce only negligible amounts of NH4+ in the HR-AMS. Finally, we quantified the NOON contents in submicron particles (PM1) and fog water in Fresno, California, and PM1 in New York City (NYC). Our results revealed the substantial presence of amino compounds in both Fresno and NYC aerosols, whereas concurrently collected fog water in Fresno contained a broader range of NOON species, including N-containing aromatic heterocycle (e.g., imidazoles) and amides. These findings highlight the significant potential of employing the widespread HR-AMS measurements of ambient aerosols and droplets to enhance our understanding of the sources, transformation processes, and environmental impacts associated with NOON compounds in the atmosphere.

Ge, Xinlei (ORCID:0000000195316478)↗
DOE OSTI2022

Spatiotemporal Route to Understanding Metal Halide Perovskitoid Crystallization

Here, a spatiotemporal experimental route is reported for the antisolvent vapor diffusion crystal growth of metal halide perovskitoids. A computational analysis combining automated image capture and diffusion modeling enables the determination of the critical concentrations required for nucleation and crystal growth from a single experiment. Five different solvent systems and ten distinct organic ammonium iodide salts were investigated with lead iodide, from which nine previously unreported compounds were discovered. Automated image capture of the mother liquor and antisolvent vials was used to determine changes in solution meniscus positions and detect the nucleation event location. Matching the observations to a numerical solution of Fick's second law diffusion model enables the calculation of reactant, solvent, and antisolvent concentrations at both the time and position of the first stable nucleation and crystal growth. A machine learning model was trained on the resulting data, and it reveals solvent- and amine-specific crystallization tendencies. Solvent systems that interact more weakly with dissolved lead species promote crystallization, while those with stronger interactions can prevent crystallization through increased solubilities. Organic amines that interact more strongly with inorganic components and exhibit greater rigidity are more likely to be incorporated into crystalline products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Enhancing characterization of organic nitrogen components in aerosols and droplets using high-resolution aerosol mass spectrometry

This study aims to enhance the understanding and application of the Aerodyne high-resolution aerosol mass spectrometer (HR-AMS) for comprehensive characterization of organic nitrogen (ON) compounds in aerosol particles and atmospheric droplets. To achieve this, we analyzed seventy-five N-containing organic compounds, representing a diverse range of ambient ON types, including amines, amides, amino acids, N-heterocycles, protein, and humic acids. Our results show that ON compounds can produce significant levels of NH x + and NO x + ion fragments, which are typically recognized as ions representative of inorganic nitrogen species. We also discovered the presence of CH 2 N + at m/z = 28.0187, an ion fragment that is rarely quantified in ambient datasets due to substantial interference from air-related N 2 + . As a result, we determined that an updated calibration factor of 0.79 is necessary to accurately quantify ON content using aerosol mass spectrometry. We also assessed the relative ionization efficiencies (RIEs) for different ON species and found that the average RIE of ON compounds (1.52 ± 0.58) aligns with the commonly used default value of 1.40 for organic aerosol (OA). Moreover, through a careful examination of the HR-AMS mass spectral features of various ON types, we propose fingerprint ion series that can aid the ON speciation analysis. The presence of C n H 2n+2 N + ions is closely linked with amines, with CH 4 N + indicating primary amines, C 2 H 6 N + suggesting secondary amines, and C 3 H 8 N + representing tertiary amines. C n H 2n NO + ions (especially for n values of 1–4) are very likely derived from amides. The co-existence of three ions, C 2 H 4 NO 2 + , C 2 H 3 NO + , and CH 4 NO + , serves as an indicator for the presence of amino acids. Additionally, the presence of C x H y N 2 + ions indicates the occurrence of 2N-heterocyclic compounds. Notably, an elevated abundance of NH 4 + is a distinct signature for amines and amino acids, as inorganic ammonium salts produce only negligible amounts of NH 4 + in HR-AMS. Finally, we quantified the ON contents in submicron particles (PM 1 ) and fog waters in Fresno, California and PM 1 in New York City (NYC). Our results revealed the substantial presence of amino compounds in both Fresno and NYC aerosols, whereas concurrently collected fog waters contained a broader range of ON species, including N-containing aromatic heterocycle (e.g., imidazoles) and amides. These findings highlight the significant potential of employing the widespread HR-AMS measurements of ambient aerosols and droplets to enhance our understanding of the sources, transformation processes, and environmental impacts associated with ON compounds in the atmosphere.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Electrocatalytic oxidation of hydrothermal liquefaction-derived aqueous phase for on-site wastewater treatment and H 2 production

Electrocatalytic oxidation (ECO) is a promising method for generating molecular hydrogen (H 2 ) while simultaneously treating the aqueous phase (AP) from hydrothermal liquefaction (HTL) of biomass-derived feedstocks such as algae, food waste, sludge, and wood. This study highlights the impact of HTL-AP composition on ECO performance, mainly activity, stability, and efficiency in a batch and flow electrolyzer. We demonstrated current efficiency (CE) for chemical oxygen demand (COD) removal ranges from 14% to 85% in the flow electrolyzer with electrode stability increasing from 20 to ≥2,800 h. Decreasing the applied potential enhances the CE. High ammonium content can accelerate deactivation, yet chloride ions appear to aid oxidation of organic compounds and enhanced anode stability. A preliminary energy and H 2 balance for an HTL sewage sludge plant shows that the HTL-AP contains sufficient COD to produce all the H 2 needs for bio-oil hydrotreating, with a 26% surplus available for other uses.

Electrolysis↗