Search NASA⌕ Search

SEARCH · Search NASA

Results for “APXPS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Probing the surface chemistry for reverse water gas shift reaction on Pt(1 1 1) using ambient pressure X-ray photoelectron spectroscopy

Using ambient pressure XPS (APXPS), we explored carbon dioxide (CO 2 ) adsorption and CO 2 hydrogenation on Pt(1 1 1) single crystal surface to observe the activation of CO 2 and the subsequent reaction mechanism. In pure CO 2 , we observed CO adsorbates and adsorbed oxygen on Pt(1 1 1) derived from CO 2 dissociation at room temperature. The introduction of H 2 (at a pressure ratio of 1:1 (H 2 :CO 2 )) increased the production of CO across all temperatures by facilitating the removal of surface oxygen. As a consequence, the surface could expose sites that could then be utilized for producing CO. Under these conditions, the reverse water–gas shift (RWGS) reaction was observed starting at 300 °C. At higher H 2 partial pressure (10:1 (H 2 :CO 2 )), the RWGS reaction initiated at a lower temperature of 200 °C and continued to enhance the conversion of CO 2 with increasing temperatures. Our results revealed that CO 2 was activated on a clean Pt(1 1 1) surface through the dissociation mechanism to form adsorbed CO and O at room temperature and at elevated temperatures. Introducing H 2 facilitated the RWGS as adsorbed oxygen was consumed continuously to form H 2 O, and adsorbed CO desorbed from the surface at elevated temperatures. This work clearly provides direct experimental evidence for the surface chemistry of CO 2 dissociation and demonstrates how hydrogen impacts the RWGS reaction on a platinum surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Kinetically versus thermodynamically controlled factors governing elementary pathways of GaP(111) surface oxidation

GaP and related III-V semiconductors have attracted interest as high-efficiency photoelectrochemical electrodes for solar water splitting. However, their efficacy is linked to the presence, identity, and integrity of native surface oxides, which are structurally and chemically complex and evolve during operation. Using ambient pressure X-ray photoelectron spectroscopy (APXPS) coupled with ab initio simulations, we track key chemical motifs expressed during evolution of GaP(111) surface oxides, their associated reaction kinetics, and their correlations with electronic properties. We identify two distinct thermal regimes corresponding to kinetically and thermodynamically controlled oxidation. Below 600 K, exposure to O2 generates kinetically facile Ga-O-Ga configurations, whereas higher temperatures cause activated oxygen to insert into Ga–P bonds as part of a thermodynamically driven transformation into a complex, heterogeneous 3D network of surface POx (1≤x ≤ 4) groups and Ga2O3 species, the latter of which eventually dominates upon depletion of surface phosphorus. Here our study highlights the critical competition between kinetic and thermodynamic factors during GaP oxidation, yielding insights for fabricating stable III-P-based photoelectrodes with precisely engineered surface properties.

08 HYDROGEN↗

Development and Elucidation of Superior Turnover Rates and Selectivity of Supported Molecular Catalysts

Abstract Supported molecular catalysts consist of nanomaterials immobilized on a solid support. Important factors that control catalyst properties (reactivity, product selectivity, and stability) include the structure and compositions of both nanomaterials and supports. This review focuses on recent studies of supported molecular catalysts with controlled activity and selectivity in our group. We will first introduce the development of previously unexplored supported molecular catalysts. We will demonstrate the controllable selectivity of catalysts based on acidified mesoporous silica, metal‐organic frameworks (MOFs), hydrogen‐activated tungsten oxides, and noble metal doped Mn x O y /Na 2 WO 4 catalyst supported on mesoporous silica. We will then discuss advanced characterization techniques under reaction conditions, which offer mechanistic explanations of activity and selectivity of supported molecular catalysts. The applications of chemical transient kinetics (CTK) analysis, ambient pressure X‐ray photoelectron spectroscopy (APXPS), and sum‐frequency generation vibrational spectroscopy (SFG‐VS) are discussed. Next, we will describe new insights into catalysis at the nanoparticle‐support interfaces, which are catalytic environments unique to supported molecular catalysts. Examples include reactions at oxide‐metal interfaces and alcohol oxidation reactions at solid–gas and solid–liquid interfaces. Lastly, we will discuss heterogenized homogeneous catalysts and heterogenized enzyme catalysts as future directions of supported molecular catalysts.

Ye, Rong↗

Mechanisms of Degradation of Toxic Nerve Agents: Quantum-chemical Insight into Interactions of Sarin and Soman with Molybdenum Dioxide

With the urgent need to provide an efficient and reliable protection for people from fatal chemical and biological weapons, our fundamental understanding of how toxins interact with filters is far from complete. The situation is further complicated by natural difficulties of performing experimental measurements with lethal toxins. Unlike experiments, computational modeling offers an attractive and safe yet reliable way of studying behavior of toxic agents on a variety of substrates at a great level of detail. Here, we report DFT-based quantum-chemical calculations of adsorption and decomposition of DMMP, sarin and soman on MoO 2 (011) surface. Our calculations show that MoO 2 strongly adsorbs toxic nerve agents and quickly decomposes them. Decomposition of DMMP on the MoO 2 (011) surface proceeds via the PO-CH 3 bond breaking and a formation of a surface methoxy group. The calculated activation barrier for this reaction is 131.5 kJ mol -1 . Unlike DMMP, decomposition of sarin and soman proceeds via the dealkylation reaction yielding propene and 3,3-dimethyl-1-butene, respectively. Decomposition of sarin requires a remarkably low energy (53.7 kJ mol- 1 ), whereas the similar reaction in soman requires 50 kJ mol -1 more energy. We also make specific predictions to guide Ambient-Pressure X-ray Photoelectron Spectroscopy (APXPS) experiments on sarin interaction with MoO 2 samples. We conclude that MoO 2 serves as an efficient substrate able of degrading toxins.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure of the Clean and Oxygen-Covered Cu(100) Surface at Room Temperature in the Presence of Methanol Vapor in the 10–200 mTorr Pressure Range

Using ambient pressure X-ray photoelectron spectroscopy (APXPS) and high pressure scanning tunneling microscopy (HPSTM), we show that in equilibrium with 0.01–0.2 Torr of methanol vapor, at room temperature, the Cu(100) surface is covered with methoxy species forming a c(2 × 2) overlayer structure. In contrast, no methoxy is formed if the surface is saturated with an ordered oxygen layer, even when the methanol pressure is 0.2 Torr. At oxygen coverages below saturation, methanol dissociates and reacts with the atomic oxygen, producing methoxy and formate on the surface, and formaldehyde that desorbs to the gas phase. Unlike the case of pure carbon monoxide and carbon dioxide, methanol does not induce the restructuring of the Cu(100) surface. These results provide insight into catalytic anhydrous production of aldehydes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ammonia Adsorption and Co-adsorption with Water in HKUST-1: Spectroscopic Evidence for Cooperative Interactions

Ammonia interactions and competition with water at the interface of nanoporous metal organic framework thin films of HKUST-1 (Cu 3 Btc 2 , Btc = 1,3,5-benzenedicarboxylate) are investigated with ambient pressure X-ray photoelectron spectroscopy (APXPS). In the absence of water, ammonia adsorption at the Cu 2+ metal center weakens the metal-linker bond of the framework. In the presence of water, due to the higher binding energy (adsorption strength) of ammonia compared to water, ammonia replaces water at the unsaturated Cu 2+ metal centers. The water molecules remaining in the pores are stabilized by hydrogen bonding to ammonia. Hydrogen bonding between the water and ammonia strengthens the metal-ammonia interaction due to cooperative interactions. Cooperative interactions result in a reduction in the metal center oxidation state facilitating linker replacement by other species explaining the previously reported structure degradation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adsorption of Dimethyl Methylphosphonate on MoO 3 : The Role of Oxygen Vacancies

Dimethyl methylphosphonate (DMMP) is a common chemical warfare agent simulant and is widely used in adsorption studies. To further increase the understanding of DMMP interactions with metal oxides, ambient pressure X-ray photoelectron spectroscopy was used here to study the adsorption of DMMP on MoO 3 , including the effects of oxygen vacancies, surface hydroxyl groups, and adsorbed molecular water. Density functional theory calculations were used to aid in the interpretation of the APXPS results. An inherent lack of Lewis acid metal sites results in weak interactions of DMMP with MoO 3 . Adsorption is enhanced by the presence of oxygen vacancies, hydroxyl groups, and molecular water on the MoO 3 surface, as measured by photoelectron spectroscopy. Computational results agree with these findings and suggest the formation of methanol through several possible pathways, but all require a proton transferred from a hydroxyl group on the surface.

36 MATERIALS SCIENCE↗

An In Situ Surface-Enhanced Infrared Absorption Spectroscopy Study of Electrochemical CO 2 Reduction: Selectivity Dependence on Surface C-Bound and O-Bound Reaction Intermediates

The CO2 electroreduction reaction (CO2RR) is a promising avenue to convert greenhouse gases into high-value fuels and chemicals, in addition to being an attractive method for storing intermittent renewable energy. Although polycrystalline Cu surfaces have long been known to be unique in their capabilities of catalyzing the conversion of CO2 to higher-order C1 and C2 fuels, such as hydrocarbons (CH4, C2H4, etc.) and alcohols (CH3OH, C2H5OH), product selectivity remains a challenge. Rational design of more selective catalysts would greatly benefit from a mechanistic understanding of the complex, multiproton, and multielectron conversion of CO2. In this study, we select three metal catalysts (Pt, Au, Cu) and apply in situ surface enhanced infrared absorption spectroscopy (SEIRAS) and ambient-pressure X-ray photoelectron spectroscopy (APXPS), coupled to density-functional theory (DFT) calculations, to get insight into the reaction pathway for the CO2RR. We present a comprehensive reaction mechanism for the CO2RR and show that the preferential reaction pathway can be rationalized in terms of metal–carbon (M–C) and metal–oxygen (M–O) affinity. We show that the final products are determined by the configuration of the initial intermediates, C-bound and O-bound, which can be obtained from CO2 and (H)CO3, respectively. C1 hydrocarbons are produced via OCH3,ad intermediates obtained from O-bound CO3,ad and require a catalyst with relatively high affinity for O-bound intermediates. Additionally, C2 hydrocarbon formation is suggested to result from the C–C coupling between C-bound COad and (H)COad, which requires an optimal affinity for the C-bound species, so that (H)COad can be further reduced without poisoning the catalyst surface. It is suggested that the formation of C1 alcohols (CH3OH) is the most challenging process to optimize, as stabilization of the O-bound species would both accelerate the formation of key intermediates (OCH3,ad) but also simultaneously inhibit their desorption from the catalyst surface. Our findings pave the way toward a design strategy for CO2RR catalysts with improved selectivity, based on the experimental/theoretical reaction mechanisms that have been identified. These results also suggest that designing the electronic structure of the catalyst is not the sole determining factor to achieve highly selective CO2RR catalysis; rather, tuning additional experimental reaction conditions such as electrolyte–intermediate interactions also become critical.

Katayama, Yu↗

Probing the Surface Chemistry of Lithium Nitridation

Chemical synthesis of Li 3 N through lithium nitridation has potential to advance rechargeable battery and nitrogen fixation technology. However, studies of the conditions for forming Li 3 N on the lithium surface via nitrogen gas exposure report contradictory findings, such as the spontaneous reaction of Li with pure N 2 , the impossibility of forming Li 3 N through pure Li and N 2 interaction, the requirement of trace H 2 O to catalyze the reaction, and evidence to the contrary. In this study, ambient pressure X-ray photoelectron spectroscopy (APXPS) was applied to evaluate the in situ chemical evolution of the lithium metal surface under nitrogen gas up to 800 mTorr. At pressures ≤10 mTorr, no Li 3 N was detected. At higher pressures, surface Li 3 N rapidly reacts with trace CO 2 . Additionally, because metallic lithium is readily oxidized by trace gases, the atomic nitrogen concentration of the lithium surface remains below 2%. When nitridation follows oxidation by O 2 gas, CO 2 gas, or H 2 O vapor, surface Li 3 N formation is inhibited. These results suggest that nitrogen gas can diffuse through the oxidized lithium metal surface to react with subsurface metallic lithium.

Binding energy↗

Multimodal Ambient Pressure Sample Environment for the HIPPIE Solid-Gas Endstation at MAX IV Laboratory

The HIPPIE APXPS instruments have undergone several major upgrades, such as developing a dedicated solid gas endstation to specialize in multimodal ambient pressure sample environments centered around X-ray photoelectron spectroscopy. Herein, the technical specifications of the HIPPIE solid gas endstation are detailed; upgrades to the laser heating and gas systems, as well as the addition of an offline 1 bar reactor, are introduced. To demonstrate how the endstation is currently being utilized, scientific examples of all upgrades are presented, as well as science cases using infrared reflection-adsorption spectroscopy. The HIPPIE solid gas endstation is maturing into an instrument offering bespoke sample environments aimed at pushing experimental capabilities, especially in the time-resolved domain.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The role of manganese in CoMnO x catalysts for selective long-chain hydrocarbon production via Fischer-Tropsch synthesis

Cobalt is an efficient catalyst for Fischer–Tropsch synthesis (FTS) of hydrocarbons from syngas (CO + H 2 ) with enhanced selectivity for long-chain hydrocarbons when promoted by Manganese. However, the molecular scale origin of the enhancement remains unclear. Here we present an experimental and theoretical study using model catalysts consisting of crystalline CoMnO x nanoparticles and thin films, where Co and Mn are mixed at the sub-nm scale. Employing TEM and in-situ X-ray spectroscopies (XRD, APXPS, and XAS), we determine the catalyst’s atomic structure, chemical state, reactive species, and their evolution under FTS conditions. We show the concentration of CH x , the key intermediates, increases rapidly on CoMnO x , while no increase occurs without Mn. DFT simulations reveal that basic O sites in CoMnO x bind hydrogen atoms resulting from H 2 dissociation on Co 0 sites, making them less available to react with CH x intermediates, thus hindering chain termination reactions, which promotes the formation of long-chain hydrocarbons.

36 MATERIALS SCIENCE↗

In Situ Ambient Pressure X-ray Photoelectron Spectroscopy Studies of Lithium-Oxygen Redox Reactions

The lack of fundamental understanding of the oxygen reduction and oxygen evolution in nonaqueous electrolytes significantly hinders the development of rechargeable lithium-air batteries. Here we employ a solid-state Li4+xTi5O12/LiPON/LixV2O5 cell and examine in situ the chemistry of Li-O2 reaction products on LixV2O5 as a function of applied voltage under ultra high vacuum (UHV) and near ambient-pressure of oxygen using X-ray photoelectron spectroscopy (APXPS). Oxygen reduction and evolution reactions take place on the surface of the mixed electronic and Li+ ionic conductor, LixV2O5, which eliminate parasitic reactions between oxygen reduction/evolution reaction intermediates and aprotic electrolytes used in Li-O2 batteries reported to date. Under UHV, reversible lithium intercalation and de-intercalation from LixV2O5 was noted, where the changes in the vanadium valence state revealed from XPS in this study were comparable to that reported previously from Li/LixV2O5 thin film batteries. In presence of oxygen near ambient pressure, the LixV2O5 surface was covered gradually by the reaction product of oxygen reduction, namely lithium peroxide (Li2O2) (approximately 1-2 unit cells) upon discharge. Interestingly, the LixV2O5 surface became re-exposed upon charging, and the oxidation of Li2O2 began at much lower overpotentials (~240 mV) than the charge overpotentials of Li-O2 cells (~1000 mV) with aprotic electrolytes, which can be attributed to subnanometer-thick Li2O2 with surfaces free of contaminants such as carbonate species. Our study provides first evidence of reversible lithium peroxide formation and decomposition in situ on an oxide surface using a solid-state cell, and new insights into the reaction mechanism of Li-O2 chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In situ study of the electronic structure of atomic layer deposited oxide ultrathin films upon oxygen adsorption using ambient pressure XPS

In this work, ambient pressure X-ray photoelectron spectroscopy (APXPS) was used to investigate the effect of oxygen adsorption on the band bending and electron affinity of Al 2 O 3 , ZnO and TiO 2 ultrathin films (~1 nm in thickness) deposited on a Si substrate by atomic layer deposition (ALD). Upon exposure to oxygen at room temperature (RT), upward band bending was observed on all three samples, and a decrease in electron affinity was observed on Al 2 O 3 and ZnO ultrathin films at RT. At 80°C, the magnitude of the upward band bending decreased, and the change in the electron affinity vanished. These results indicate the existence of two surface oxygen species: a negatively charged species that is strongly adsorbed and responsible for the observed upward band bending, and a weakly adsorbed species that is polarized, lowering the electron affinity. Based on the extent of upward band bending on the three samples, the surface coverage of the strongly adsorbed species exhibits the following order: Al 2 O 3 > ZnO > TiO 2 . This finding is in stark contrast to the trend expected on the surface of these bulk oxides, and highlights the unique surface activity of ultrathin oxide films with important implications, for example, in oxidation reactions taking place on these films or in catalyst systems where such oxides are used as a support material.

36 MATERIALS SCIENCE↗

Temporal and thermal evolutions of surface Sr-segregation in pristine and atomic layer deposition modified La 0.6 Sr 0.4 CoO 3-δ epitaxial films

The bulk-to-surface Sr segregation can seriously compromise the stability of oxygen electrocatalysis in La 1-x Sr x CoO 3-δ and limit its practical applications such as in solid oxide fuel cells. We show via in situ ambient pressure X-ray photoelectron spectroscopy (APXPS) that the surface Sr-segregation is a kinetically fast process and the equilibrium surface Sr-concentration follows Arrhenius law from 250 to 520 °C at a fixed p O 2 = 1 × 10 -3 atm. We also show that application of a nanoscaled, atomic layer deposition (ALD) derived ZrO 2 overcoat can effectively suppress the Sr-segregation by reducing the surface concentration of oxygen vacancies. Electrochemical impedance spectroscopy (EIS) study further confirms that the ALD-ZrO 2 -coated LSCo epitaxial film exhibits a much lower and more stable polarization resistance than the uncoated one at 550 °C for >300 hours, suggesting that Sr-segregation is the source of the higher resistance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dimethyl methylphosphonate adsorption and decomposition on MoO 2 as studied by ambient pressure x-ray photoelectron spectroscopy and DFT calculations

Organophosphonates range in their toxicity and are used as pesticides, herbicides, and chemical warfare agents (CWAs). Few laboratories are equipped to handle the most toxic molecules, thus simulants such as dimethyl methylphosphonate (DMMP), are used as a first step in studying adsorption and reactivity on materials. Benchmarked by combined experimental and theoretical studies of simulants, calculations offer an opportunity to understand how molecular interactions with a surface changes upon using a CWA. However, most calculations of DMMP and CWAs on surfaces are limited to adsorption studies on clusters of atoms, which may differ markedly from the behavior on bulk solid-state materials with extended surfaces. We have benchmarked our solid-state periodic calculations of DMMP adsorption and reactivity on MoO 2 with ambient pressure x-ray photoelectron spectroscopy studies (APXPS). Furthermore, DMMP is found to interact strongly with a MoO 2 film, a model system for the MoOxcomponent in the ASZM-TEDA.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase Transformation and Water Adsorption Behavior of As‐Deposited and Annealed Ru Metal Thin Films Prepared by Atomic Layer Deposition

ABSTRACT Surfaces play a central role in catalytic processes, and understanding the transformation of ruthenium metal into ruthenium oxide during annealing is essential for tailoring functional catalytic interfaces. In this study, we systematically investigate ≈22 nm thick Ru metal films deposited by atomic layer deposition (ALD) at 300°C, focusing on their chemical composition, structural evolution, and surface hydration behavior following post‐deposition annealing in air from 400 to 600°C. Lab‐based and synchrotron X‐ray photoelectron spectroscopy (XPS) reveal a gradual conversion from metallic Ru to fully oxidized Ru 4+ with increasing annealing temperature, accompanied by a corresponding increase in lattice oxygen. X‐ray diffraction (XRD) shows amorphous Ru oxide phases at 400°C and 500°C that evolve into crystalline RuO 2 at 600°C, while atomic force microscopy (AFM) indicates enhanced grain growth and surface roughening upon annealing. Ambient‐pressure XPS (AP‐XPS) under controlled H 2 O vapor environments (1–17 Torr) demonstrates that samples annealed at 400°C and 500°C exhibit initially high hydroxyl coverage that decreases with increasing water vapor pressure, concurrent with a rise in molecular H 2 O adsorption. In contrast, the crystalline RuO 2 surface formed at 600°C maintains stable hydroxylation and supports increased water uptake. Overall, this work provides fundamental insight into Ru oxide–H 2 O interactions and establishes design principles for engineering oxide surfaces optimized for electrocatalytic applications.

APXPS↗

X-Ray Spectroscopic Characterization of BaO, Ba(OH) 2 , BaCO 3 , and Ba(NO 3 ) 2

Simple inorganic barium compounds are difficult to study spectroscopically in the surface sensitive soft X-ray regime due to significant surface contamination that can dominate the spectra. In this work, we present a near-edge X-ray absorption (NEXAFS) and X-ray photoelectron spectroscopic (XPS) study of four barium compounds: BaO, Ba(OH) 2 , BaCO 3 , and Ba(NO 3 ) 2 . Using an ambient-pressure XPS instrument we prepared thin film samples in situ, which provided a high degree of control over the surface chemistry and significantly reduced the amount of contamination. The O K-edge spectrum for BaO presented here is in excellent agreement with the latest calculations in the literature, and indicates that experimental spectra in the literature for this compound may have suffered from carbonate contamination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗