Search NASA⌕ Search

SEARCH · Search NASA

Results for “Adducts”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Ultrasonic characterization of changes in viscoelastic properties of epoxy during cure

A technique for using the longitudinal velocity (LV) of an ultrasonic wave to monitor the extent of cross linking (CL) during the cure of thermosetting resins is described. The method was developed by monitoring the rate of change in LV during the cure of a bisphenol-A epoxy resin with an amine adduct. The experiment included variations in the temperature and stoichiometry in order to express the rate of change in terms of the reaction kinetics. The pulse-echo method was used with a single transducer operating at 20 MHz. Numerical models were defined to account for the acoustic response of a single layer, the attenuation and the reflection coefficient. A linear relationship was observed between the inverse of the temperature and the log of the rate of change in the velocity, supporting the theory that the velocity could be used to monitor the extent of the cross-linking reaction. An activation energy of 11.9 kcal/mole was calculated for the mixture being investigated.

Winfree, W. P.↗
NASA NTRS1986

Measurement of the degree of cure in epoxies with ultrasonic velocity

The use of ultrasonic longitudinal velocity values to measure the degree of cure (defined for an epoxide system as the concentration of epoxide/amine bonds divided by the initial epoxide concentration) in epoxy resins is investigated. The experimental setup used to measure the changes in longitudinal velocity with time is described, together with the technique used to calculate the degree of cure from the acoustic data, using the principle of additive module. Measurements were done with diglycidyl ether of bisphenol A epoxy resin cured with an amine adduct agent. Good qualitative agreement was shown between the time dependence of the acoustically measured degree of cure and the predicted rate of reaction.

Winfree, W. P.↗
NASA NTRS1986

Rate constant for the reaction of O(3P) with diacetylene from 210 to 423 K

The absolute rate constant for the reaction of O(3P) with diacetylene (C4H2) has been measured as a function of pressure and temperature by the flash-photolysis/resonance-fluorescence method. At 298 K and below, no pressure dependence of the rate constant was observed, but at 423 K a moderate (factor-of-2) increase was detected in the range 3 to 75 torr Ar.Results at or near the high-pressure limit are represented by an Arrhenius expression over the temperature range 210 to 423 K. The results are compared with previous determinations, all of which employed the discharge-flow/mass-spectrometry technique. The mechanism of the reaction is considered, including both primary and secondary processes. The heats of formation of the reactants, adducts, and products for the O(3P) + C4H2 reaction are discussed and contrasted with those for O(3P) + C2H2.

Mitchell, M. B.↗
NASA NTRS1987

The triose model - Glyceraldehyde as a source of energy and monomers for prebiotic condensation reactions

Glyceraldehyde acts as a source of energy and monomers in a new model of the origin of life. The simplest form of the model functions by converting formaldehyde from the environment into glyceraldehyde which spontaneously forms hemiacetal adducts that are oxidized to polyglyceric acid. Polyglyceric acid, in turn, acts as an autocatalyst with a rudimentary replicating ability. A unique property of the model is its ability to unite the origin of metabolism and the origin of polymer synthesis into a single process. Furthermore, the chemical resemblance of the model to glycolysis gives it the potential to develop a biological metabolism in a straightforward manner.

Weber, Arthur L.↗
NASA NTRS1987

Mass spectrometric studies of phosphine pyrolysis and OMVPE growth of InP

The mechanism of PH3 decomposition was studied by using D2 as a carrier gas and analyzing the reaction products with a mass spectrometer. The effects of InP and silica surfaces were investigated. The only gaseous product below 600 C is H2. Since any gas-phase H atoms would produce HD, the reaction occurs entirely on the surface. The slow step is the unimolecular removal of the first hydrogen atom, with an activation energy of 36.0 kcal/mole on InP surfaces. The reaction on InP is first-order for PH3 concentrations as high as 15 percent, so the surface is not saturated at those conditions. When trimethylindium (TMIn) is added to the gas mixture, the mechanism changes dramatically, probably proceeding via an unstable intermediate adduct of TMIn and PH3 which eliminates CH4 upon formation. This concerted reaction lowers the pyrolysis temperatures of both PH3 and TMIn.

Larsen, C. A.↗
NASA NTRS1988

Reaction mechanisms in the organometallic vapor phase epitaxial growth of GaAs

The decomposition mechanisms of AsH3, trimethylgallium (TMGa), and mixtures of the two have been studied in an atmospheric-pressure flow system with the use of D2 to label the reaction products which are analyzed in a time-of-flight mass spectrometer. AsH3 decomposes entirely heterogeneously to give H2. TMGa decomposes by a series of gas-phase steps, involving methyl radicals and D atoms to produce CH3D, CH4, C2H6, and HD. TMGa decomposition is accelerated by the presence of AsH3. When the two are mixed, as in the organometallic vapor phase epitaxial growth of GaAs, both compounds decompose in concert to produce only CH4. A likely model is that of a Lewis acid-base adduct that forms and subsequently eliminates CH4.

Larsen, C. A.↗
NASA NTRS1988

Kinetics of CH(X 2Pi) radical reactions with cyclopropane, cyclopentane, and cyclohexane

Rate constants have been obtained for CH(X 2Pi) radical reactions with cyclopropane, cyclopentane, and cyclohexane in order to establish the rate of CH insertion into secondary C-H bonds in alkanes. Data indicate that there is no measurable dependence on photolysis laser energy. The reactions all exhibited rate constants that decrease with increasing temperature. It is suggested that a possible set of pathways for the cycloalkane reactions is a ring-opening process where the excited adduct decomposes to a hydrogen atom and a diene.

Zabarnick, S.↗
NASA NTRS1988

Chemistry of chlorinated species in the Antarctic stratosphere

The chemistry of Cl sub 2 O sub 2, the chlorine monoxide dimer, has been further investigated in order to better asses its potential role in catalytic ozone destruction cycles. The dimer has been generated in a flow system, in the 200 to 250 K temperature range, by using ozone and chlorine atoms as ClO precursors. The Cl-atoms are produced by a microwave discharge of either Cl sub 2, or of F sub 2 with subsequent addition of HCl. With this later scheme the dimer can be generated in the absence of Cl sub 2. The Fourier transform infrared spectra of the products clearly indicates the presence of two isomers, in agreement with earlier results (J. Phys. Shen., 91, 433, 1987). None of the observed IR bands can be attributed to a ClO-OClO adduct, since they all appear in the absence of any detectable amount of OCl. It is likely that the particles in the polar stratospheric clouds will have a relatively dilute nitric acid outer layer, even if the core is the nitric acid monohydrate, since the particles are in equilibrium with the ambient water vapor, which is present at levels of a few parts per million.

Molina, Mario J.↗
NASA NTRS1988

Quantitation and immunocytochemical localization of ubiquitin conjugates within rat red and white skeletal muscles

Solid-phase immunochemical methods were employed to probe the dynamics of ubiquitin pools within selected rat skeletal muscles. The total ubiquitin content of red muscles was greater than that of white muscles, even though the fractional conjugation was similar for both types of muscles. The specificity for conjugated ubiquitin in solid-phase applications, previously demonstrated for an affinity-purified antibody against SDS-denatured ubiquitin, was retained when used as a probe for ubiquitin-protein adducts in tissue sections. Immunohistochemical localization revealed that differences in ubiquitin pools derived from the relative content of red (oxidative) vs white (glycolytic) fibers, with the former exhibiting a higher content of ubiquitin conjugates. Subsequent immunogold labeling demonstrated statistically significant enhanced localization of ubiquitin conjugates to the Z-lines in both red and white muscle fiber types.

Riley, Danny A.↗
NASA NTRS1987

Linear acene derivatives - New routes to pentacene and naphthacene and the first synthesis of a triptycene with two anthracene moieties

The cycloaddition of o-xylylene to arene 1,4-endoxides was used to construct linear arene derivatives. An analogous sequence but with naphthalene 1,4-endoxides gave naphthacenes. Dehydration of the di adducts from 4 and anthracene 1,4:5,8-diendoxides gave a mixture of 5,9,14,18- and 5,8,15,18-tetrahydroheptacenes 3 and 9. The previously unknown triptycene 2 was synthesized from 5,14-dihydropentacene, an intermediate in the new pentacene synthesis, in three steps and 29 percent overall yield.

Luo, Jihmei↗
NASA NTRS1988

Bisannelation with a benzo(1,2-c:4,5-c-prime) difuran equivalent - A new route to linear acene derivatives

It was observed that the base peak in the mass spectra of all the Diels-Alder bis adducts of anthracene diendoxide as well as of its tetrahydro derivative appear at m/e 158, corresponding to the radical cation of benzo(1,2-c:4,5-c-prime) difuran (BDF). This paper describes a synthetic equivalent of BDF and demonstrates its utility for obtaining linear acene derivatives.

Luo, Jihmei↗
NASA NTRS1989

Iptycene synthesis: A new method for attaching a 2,3-anthracene moiety to the 9,10-positions of another anthracene moiety - Exceptional conditions for a Lewis acid catalyzed Diels-Alder reaction

An efficient three-step method for appending a 2,3-anthracene moiety to the 9,10-positions of an existing anthracene moiety is described. The first step uses excess 1,4-anthraquinone (3 equiv) and aluminum chloride (6 equiv) to obtain the anthracene-quinone cycloadduct (omission of the AlCl3 resulted in no adduct). The resulting diketone was reduced to the corresponding diol (excess LiAlH4), which was dehydrated to the arene with phosphorus oxychloride and pyridine. Specific examples include the preparation of heptipycene 8 from pentiptycene 6 (66 percent overall yield) and a similar conversion of 8 to the noniptycene 13 (75 percent overall yield). The methodology led to a markedly improved synthesis of tritriptycene 9 and the first synthesis of undecaiptycene 14.

Chen, Yong-Shing↗
NASA NTRS1989

Organic cathode for a secondary battery

A liquid catholyte for a battery based on liquid metal such as sodium anode and a solid, ceramic separator such as beta alumina (BASE) comprises a mixture of a Group I-III metal salt such as sodium tetrachloroaluminate and a minor amount of an organic carbonitrile depolarizer having at least one adjacent ethylenic band such as 1 to 40 percent by weight of tetracyanoethylene. The tetracyanoethylene forms an adduct with the molten metal salt.

Bugga, Ratnakumar V.↗
NASA NTRS1991

Association reactions at low pressure. IV - The HC3N(+)/HC3N system

Ion cyclotron mass spectrometry is used here to study the reactions between HC3N(+) and HC3N and between HC5N(+) and HC3N at pressures from 1 x 10 to the -7th to 0.001 Torr. The former reaction has both a bimolecular reaction path and a termolecular reaction path. The overall bimolecular reaction rate coefficient is 1.3 x 10 to the -19 cu cm/s. The primary product HC5N(+) represents 90 percent of the product ions, while HC6N2(+) and H2C6N2(+) each represent 5 percent. The termolecular association rate coefficient is 3.7 x 10 to the -24th cm exp 6/s, with He as the third body. The mean lifetime of the collision is 180 microsec. HC5N(+) reacts with HC3N to form the adduct ion H2C8N2(+) through both bimolecular and termolecular reactions. The bimolecular rate coefficient is 5.0 x 10 to the -10th cu cm/s and the termolecular one is 1.2 x 10 to the -22nd cm exp 6/s, with HC3N as the third body.

Sen, Atish D.↗
NASA NTRS1992

Tough, high performance, addition-type thermoplastic polymers

A tough, high performance polyimide is provided by reacting a triple bond conjugated with an aromatic ring in a bisethynyl compound with the active double bond in a compound containing a double bond activated toward the formation of a Diels-Adler type adduct, especially a bismaleimide, a biscitraconimide, or a benzoquinone, or mixtures thereof. Addition curing of this product produces a high linear polymeric structure and heat treating the highly linear polymeric structure produces a thermally stable aromatic addition-type thermoplastic polyimide, which finds utility in the preparation of molding compounds, adhesive compositions, and polymer matrix composites.

Pater, Ruth H.↗
NASA NTRS1992

Ignition delays, heats of combustion, and reaction rates of aluminum alkyl derivatives used as ignition and combustion enhancers for supersonic combustors

The work was based on adapting an apparatus and procedure developed at Southwest Research Institute for rating the ignition quality of fuels for diesel engines. Aluminum alkyls and various Lewis-base adducts of these materials, both neat and mixed 50/50 with pure JP-10 hydrocarbon, were injected into the combustion bomb using a high-pressure injection system. The bomb was pre-charged with air that was set at various initial temperatures and pressures for constant oxygen density. The ignition delay times were determined for the test materials at these different initial conditions. The data are presented in absolute terms as well as comparisons with the parent alkyls. The relative heats of reaction of the various test materials were estimated based on a computation of the heat release, using the pressure data recorded during combustion in the bomb. In addition, the global reaction rates for each material were compared at a selected tmperature and pressure.

Ryan, T. W., III↗
NASA NTRS1995

Gas chromatography/ion mobility spectrometry as a hyphenated technique for improved explosives detection and analysis

Ion Mobility Spectrometry (IMS) is currently being successfully applied to the problem of on-line trace detection of plastic and other explosives in airports and other facilities. The methods of sample retrieval primarily consist of batch sampling for particulate residue on a filter card for introduction into the IMS. The sample is desorbed into the IMS using air as the carrier and negative ions of the explosives are detected, some as an adduct with a reagent ion such as Cl(-). Based on studies and tests conducted by different airport authorities, this method seems to work well for low vapor pressure explosives such as RDX and PETN, as well as TNT that are highly adsorptive and can be found in nanogram quantities on contaminated surfaces. Recently, the changing terrorist threat and the adoption of new marking agents for plastic explosives has meant that the sample introduction and analysis capabilities of the IMS must be enhanced in order to keep up with other detector developments. The IMS has sufficient analytical resolution for a few threat compounds but the IMS Plasmogram becomes increasingly more difficult to interpret when the sample mixture gets more complex.

Mercado, AL↗
NASA NTRS1995

Enzymatic synthesis of polymers containing nicotinamide mononucleotide

Nicotinamide mononucleoside 5'-diphosphate in its reduced form is an excellent substrate for polynucleotide phosphorylase from Micrococcus luteus both in de novo polymerization reactions and in primer extension reactions. The oxidized form of the diphosphate is a much less efficient substrate; it can be used to extend primers but does not oligomerize in the absence of a primer. The cyanide adduct of the oxidized substrate, like the reduced substrate, polymerizes efficiently. Loss of cyanide yields high molecular weight polymers of the oxidized form. Terminal transferase from calf thymus accepts nicotinamide mononucleoside 5'-triphosphate as a substrate and efficiently adds one residue to the 3'-end of an oligodeoxynucleotide. T4 polynucleotide kinase accepts oligomers of nicotinamide mononucleotide as substrates. However, RNA polymerases do not incorporate nicotinamide mononucleoside 5'-triphosphate into products on any of the templates that we used.

Liu, Rihe↗