Search NASA⌕ Search

SEARCH · Search NASA

Results for “Air vertical motion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

On the Motion of Air Through the Stratospheric Polar Vortex

Trajectory calculations using horizontal winds from the United Kingdom Meteorological Office data assimilation system, and vertical velocities from a radiation calculation are used to simulate the three-dimensional motion of air through the stratospheric polar vortex, for several northern hemisphere(NH) and southern hemisphere (SH) winters since the launch of UARS.

UARS↗

Entrainment instability and vertical motion as causes of stratocumulus breakup

Entrainment instability is thought to be a cause of stratocumulus breakup. At the interface between the cloud and the overlying air, mixtures may form which are negatively buoyant because of cloud droplet evaporation. Quantities devised to predict breakup are obtained from aircraft observations and are tested against cloud observations from satellite. Often, the parameters indicate that breakup should occur but the clouds remain, sometimes for several days. One possible explanation for breakup is vertical motion from passing synoptic cyclones. Several cases suggest that breakup is associated with the downward vertical motion from the cold air advected behind an eastward moving cyclone.

Weaver, C. J.↗

Objective Motion Cueing Criteria Investigation Based on Three Flight Tasks

This paper intends to help establish fidelity criteria to accompany the simulator motion system diagnostic test specified by the International Civil Aviation Organization. Twelve air- line transport pilots flew three tasks in the NASA Vertical Motion Simulator under four different motion conditions. The experiment used three different hexapod motion configurations, each with a different tradeoff between motion filter gain and break frequency, and one large motion configuration that utilized as much of the simulator's motion space as possible. The motion condition significantly affected: 1) pilot motion fidelity ratings, and sink rate and lateral deviation at touchdown for the approach and landing task, 2) pilot motion fidelity ratings, roll deviations, maximum pitch rate, and number of stick shaker activations in the stall task, and 3) heading deviation after an engine failure in the takeoff task. Significant differences in pilot-vehicle performance were used to define initial objective motion cueing criteria boundaries. These initial fidelity boundaries show promise but need refinement.

pilot training↗

Dynamic heave-pitch analysis of air cushion landing systems

A program to develop analytical tools for evaluating the dynamic performance of Air Cushion Landing Systems (ACLS) is described. The heave (vertical) motion of the ACLS was analyzed, and the analysis was extended to cover coupled heave-pitch motions. The mathematical models developed are based on a fundamental analysis of the body dynamics and fluid mechanics of the aircraft-cushion-runway interaction. The air source characteristics, flow losses in the feeding ducts, trunk and cushion, the effects of fluid compressibility, and dynamic trunk deflections, including ground contact are considered. A computer program, based on the heave-pitch analysis, was developed to simulate the dynamic behavior of an ACLS during landing impact and taxi over an irregular runway. The program outputs include ACLS motions, loadings, pressures, and flows as a function of time. To illustrate program use, three basic types of simulations were carried out. The results provide an initial indication of ACLS performance during (1) a static drop, (2) landing impact, and (3) taxi over a runway irregularity.

Captain, K. M.↗

Isentropic Analysis of Convective Motions

This paper analyzes the convective mass transport by sorting air parcels in terms of their equivalent potential temperature to determine an isentropic streamfunction. By averaging the vertical mass flux at a constant value of the equivalent potential temperature, one can compute an isentropic mass transport that filters out reversible oscillatory motions such as gravity waves. This novel approach emphasizes the fact that the vertical energy and entropy transports by convection are due to the combination of ascending air parcels with high energy and entropy and subsiding air parcels with lower energy and entropy. Such conditional averaging can be extended to other dynamic and thermodynamic variables such as vertical velocity, temperature, or relative humidity to obtain a comprehensive description of convective motions. It is also shown how this approach can be used to determine the mean diabatic tendencies from the three-dimensional dynamic and thermodynamic fields. A two-stream approximation that partitions the isentropic circulation into a mean updraft and a mean downdraft is also introduced. This offers a straightforward way to identify the mean properties of rising and subsiding air parcels. The results from the two-stream approximation are compared with two other definitions of the cloud mass flux. It is argued that the isentropic analysis offers a robust definition of the convective mass transport that is not tainted by the need to arbitrarily distinguish between convection and its environment, and that separates the irreversible convective overturning fromoscillations associated with gravity waves.

Lagrangian circulation↗

Piloted simulation of one-on-one helicopter air combat at NOE flight levels

A piloted simulation designed to examine the effects of terrain proximity and control system design on helicopter performance during one-on-one air combat maneuvering (ACM) is discussed. The NASA Ames vertical motion simulator (VMS) and the computer generated imagery (CGI) systems were modified to allow two aircraft to be independently piloted on a single CGI data base. Engagements were begun with the blue aircraft already in a tail-chase position behind the red, and also with the two aircraft originating from positions unknown to each other. Maneuvering was very aggressive and safety requirements for minimum altitude, separation, and maximum bank angles typical of flight test were not used. Results indicate that the presence of terrain features adds an order of complexiaty to the task performed over clear air ACM and that mix of attitude and rate command-type stability and control augmentation system (SCAS) design may be desirable. The simulation system design, the flight paths flown, and the tactics used were compared favorably by the evaluation pilots to actual flight test experiments.

Lewis, M. S.↗

Advancing Electric Propulsion Aircraft Evaluation for Urban Air Mobility: Insights from NASA Ames

This presentation delves into a recent evaluation conducted at NASA-Ames on the Vertical Motion Simulator, focusing on the handling qualities of Distributed Electric Propulsion VTOL (eVTOL) aircraft, specifically tailored for Urban Air Mobility (UAM) applications. The presentation will focus on the recent effort to adapt and refine use of the Aeronautical Design Standard -33 (ADS-33) rotorcraft handling qualities developed by the U.S. Army and NASA to meet the diverse needs of civilian (eVTOL) concept evaluation. A brief discussion of the author’s personal test pilot insights in the early development of military Fly-By-Wire evaluation methods will also be provided. The emergence of innovative eVTOL designs with unique lift capabilities and flight control systems, present both opportunities and challenges, particularly in ensuring safety amidst technological complexity. To navigate these challenges, our investigation examined evaluation criteria designed to accommodate the varied configurations and advanced automation systems inherent in modern eVTOL aircraft. By establishing a standardized approach to evaluation, our research not only fosters innovation but also upholds safety standards in the dynamic landscape of urban air mobility. Through this endeavor, we help to facilitate the seamless integration of novel aircraft capabilities into new operations, contributing to a new era of safe and efficient aerial transportation.

eVTOL↗

Advancing Electric Propulsion Aircraft Evaluation for Urban Air Mobility: Insights from NASA-Ames

This presentation delves into a recent evaluation conducted at NASA-Ames on the Vertical Motion Simulator, focusing on the handling qualities of Distributed Electric Propulsion VTOL (eVTOL) aircraft, specifically tailored for Urban Air Mobility (UAM) applications. The presentation will focus on the recent effort to adapt and refine use of the Aeronautical Design Standard -33 (ADS-33) rotorcraft handling qualities developed by the U.S. Army and NASA to meet the diverse needs of civilian (eVTOL) concept evaluation. A brief discussion of the author’s personal test pilot insights in the early development of military Fly-By-Wire evaluation methods will also be provided. The emergence of innovative eVTOL designs with unique lift capabilities and flight control systems, present both opportunities and challenges, particularly in ensuring safety amidst technological complexity. To navigate these challenges, our investigation examined evaluation criteria designed to accommodate the varied configurations and advanced automation systems inherent in modern eVTOL aircraft. By establishing a standardized approach to evaluation, our research not only fosters innovation but also upholds safety standards in the dynamic landscape of urban air mobility. Through this endeavor, we help to facilitate the seamless integration of novel aircraft capabilities into new operations, contributing to a new era of safe and efficient aerial transportation.

Loran Allen Haworth↗

Simulation Technology at NASA

NASA Ames Research Center is home to several high-fidelity research flight and air-traffic control simulation facilities which, together with an experienced workforce, produce high-quality research data and findings that have proven to be applicable in the real world. These assets include the Vertical Motion Simulator (VMS), Crew Vehicle Systems Research Facility (CVSRF), Future Flight Central (FFC) air traffic control tower simulator, and several air-traffic control (ATC) simulators. The VMS combines a high-fidelity simulation capability with an adaptable simulation environment, enabling customization for numerous human-in-the-loop research applications. The distinctive feature of the VMS is its unparalleled large amplitude, high-fidelity motion capability. In over 30 years of continuous operation, the VMS has contributed significantly to the body of knowledge in a range of disciplines directly benefiting several aerospace programs and flight safety, including the design and development of flight control systems for the Joint Strike Fighter, Space Shuttle Orbiter, and rotorcraft. It continues to be used for researching new vehicle configurations, vehicle control and safety, transfer-of-training, etc., by NASA, other government agencies, and Industry.The CVSRF includes two motion-based flight simulators: a Boeing 747-400 full flight simulator and the reconfigurable Advanced Concepts Flight Simulator (ACFS). These simulators are primarily used to research air-traffic management concepts and procedures, advanced navigation and avionics concepts, and cockpit human factors. FFC is a full-sized control tower simulator with a 360-degree external field-of-view display system and reconfigurable system architecture. FFC and the ATC simulators are used for testing air-traffic management automation and decision support tools and demonstrate their feasibility in a realistic environment prior to technology transfer for implementation in the National Airspace System (NAS).To support integrated simulations and flight-tests for NASA's Unmanned Aircraft Systems (UAS) in the National Airspace System (NAS) Project, NASA developed a distributed test environment incorporating Live, Virtual, Constructive, (LVC) concepts. Development of the software enabling the LVC is conducted primarily at the Distributed Simulation Research Lab (DSRL) at NASA Ames. The LVC components provide the core infrastructure supporting simulation of UAS operations by integrating live and virtual aircraft in a realistic air traffic environment. This provides the ability to conduct tests more efficiently by promoting the use of existing distributed assets. The LVC infrastructure was used in several human-in-the-loop simulations to evaluate acceptance of Detect and Avoid (DAA) advisories used by UAS pilots to maintain well clear of other virtual traffic and to negotiate maneuvers with air traffic control. It is currently being used to support testing of self-separation algorithms between unmanned and manned aircraft in live flight. Further simulations with more comprehensive air traffic scenarios mixing live and virtual aircraft is planned.In the current fiscal environment, maintaining and upgrading these high-fidelity simulation assets and retaining the skilled workforce necessary to meet future research needs is the primary non-technical challenge.

CVSRF↗

Some climatological variables for TOGA-COARE domains - 1985-1990

Results are presented of the Tropical Oceans Global Atmosphere-Coupled Ocean Atmosphere Response Experiment (TOGA-COARE) conducted in the western Pacific, with particular attention given to the atmospheric component of the experiment. The climatological variables explored are the mean sea level pressure, precipitable water, sea surface-air temperature difference, zonal wind component at 200 mb and 10 m, vertical motion at 500 mb, and precipitation rates. The paper provides some of the large-scale flow patterns in which other circulation features reside. Results are presented for three of the TOGA-COARE domains bounded by the following: (1) the Upper Air Network, 30 deg N-30 deg S, 90 deg E-70 deg W; (2) the Large-Scale Array, 10 deg N-10 deg S, 140 deg E-180 deg; and (3) the Equatorial Synoptic Array, 5 deg N-5 deg S, 150 deg E-180 deg.

Vincent, Dayton G.↗

A numerical model study of long-term planetary wave predictability

A numerical model was developed to study planetary wave behavior over periods up to 4 months under the influences of stochastic and diffusive forcing by synoptic scale motions and of sea surface temperature anomalies. The model is suitable for Monte Carlo experiments which provide ensemble mean and variance predictions and permit the response to heating anomalies to be partly separated from random variability. The model incorporates the linear-balanced dynamical equations for wind at two tropospheric levels and temperature at one level. The model atmosphere is forced by semiempirical January heating linearly dependent on local air temperature. Topography and the lower boundary layer are represented by vertical motion and drag functions, respectively, of the lower level wind. The linear phase speeds of Rossby waves are modified to reflect the effect of the stratosphere.

Wobus, R. L.↗

Balloon-borne ozonesonde and rocket temperature and wind data gathered during the July 1977 intertropical convergence zone experiment

In middle latitudes, it is possible for large concentrations of stratospheric air to be brought down to the tropopause through folds or breaks in the tropopause. The exchange of air from the tropopause into higher altitudes is not well understood. Thus, the ITCZ (Intertropical Convergence Zone) experiment, conducted from July 16 through July 31, 1977, included a series of balloon-borne ozone soundings. The results of these soundings are presented and explain in the vertical exchange of air and provide information on the short vertical scales-of-motion. Rocketsonde data was also gathered in the ITCZ experiment in support of a stratospheric scales-of-motion study. The investigation was to determine whether rocketsonde and satellite information currently used yield information on the stratospheric horizontal wave spectrum and its importance with respect to tropospheric and mesospheric interaction and transport.

Schmidlin, F. J.↗

Simulation evaluation of display/FLIR concepts for low-altitude, terrain-following helicopter operations

A piloted simulation of three head-down display (HDD) concepts with flight-director guidance superimposed on forward-looking infrared (FLIR) imagery was performed to evaluate the task of low-level, terrain-following (TF), manual helicopter flight. The three display concepts were examined for the purpose of finding ways by which aircraft flight-attitude and command symbols and FLIR imagery could be integrated onto one instrument. In all cases, the FLIR imagery was centered on the flight-path vector of the aircraft. The three displays were then characterized by having: (1) pitch attitude conformal to the FLIR imagery; (2) pitch attitude conformal to the FLIR imagery, but with an increase in the scaling; and (3) pitch attitude nonconformal to the FLIR imagery with the same pitch scaling as in (2). The simulation was conducted on the Vertical Motion Simulator (VMS) at Ames Research Center, using NASA and Air Force test pilots. The pilots indicated that the nonconformal pitch attitude and FLIR display was the preferred way to display information because of the absence of pitch-attitude information on displays (1) and (2) during some portions of the operational flight envelope.

Swenson, H. N.↗

Simulation evaluation of a low-altitude helicopter flight guidance system adapted for a helmet-mounted display

A computer aiding concept for low-altitude helicopter flight has been developed and evaluated in a real-time piloted simulation. The concept included an optimal control trajectory-generation algorithm based upon dynamic programming, and a helmet-mounted display (HMD) presentation of a pathway-in-the-sky, a phantom aircraft, and flight-path vector/predictor guidance symbology. The pilot evaluation was conducted at the NASA-Ames Research Center moving base vertical motion simulator (VMS) by pilots representing NASA, the US Army, Air Force, and helicopter industry. The pilot manually tracked the trajectory generated by the algorithm utilizing the HMD symbology. The pilots were able to satisfactorily perform the tracking tasks while maintaining a high degree of awareness of the outside world.

Swenson, Harry N.↗

The problem of atmospheric turbulence

All ground-based observations of the solar five-minute oscillations are affected by turbulence in the Earth's atmosphere that leads to substantial refractive index variations. The turbulent motions serve to mix an air mass that is thermally stratified in the vertical, thereby producing intermittent thermal fluctuations over a wide range of heights in the atmosphere. These thermal structures yield refractive index changes that deflect the light path in a complicated way, producing intricate variations of amplitude and phase in what might have started out as simple plane waves. Since the fluid turbulence is statistical in nature, so too is the optical turbulence which is an integral measure of the refractive index changes along the light travel path. All of this produces what is usually called atmospheric seeing, which consists of image motion, blurring and distortion across the field of view. The effects of atmospheric seeing upon observations of five-minute oscillations carried out from the ground were assessed. This will help to provide a baseline estimate of the scienctific benefits that might accrue if one were able to observe the same oscillations from a space observatory unfettered by seeing effects.

Toomre, J.↗

A Flight Study of the Conversion Maneuver of a Tilt-Duct VTOL Aircraft

Flight records are presented from an early flight test of a wing-tip mounted tilting-ducted-fan, vertical-take-off and landing (VTOL) aircraft configuration. Time histories of the aircraft motions, control positions, and duct pitching-moment variation are presented to illustrate the characteristics of the aircraft in hovering, in conversion from hovering to forward flight, and in conversion from forward flight to hovering. The results indicate that during essentially continuous slow level- flight conversions, this aircraft experiences excessive longitudinal trim changes. Studies have shown that the large trim changes are caused primarily by the variation of aerodynamic moments acting on the duct units. Action of the duct-induced downwash on the horizontal stabilizer during the conversion also contributes to the longitudinal trim variations. Time histories of hovering and slow vertical descent in the final stages of landing in calm air show angular motions of the aircraft as great as +/- 10 deg. about all axes. Stick and pedal displacements required to control the aircraft during the landing maneuver were on the order of 50 to 60 percent of the total travel available.

Tapscott, Robert J.↗