Search NASA⌕ Search

SEARCH · Search NASA

Results for “Al2O3”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Development Plus Kinetic and Mechanistic Studies of a Prototype Supported-Nanoparticle Heterogeneous Catalyst Formation System in Contact with Solution: Ir(1,5-COD)Cl/ -Al2O3 and Its Reduction by H2 to Ir(0)n/γ-Al2O3

An important question and hence goal in catalysis is how best to transfer the synthetic and mechanistic insights gained from the modern revolution in nanoparticle synthesis, characterization, and catalysis to prepare the next generation of improved, supported-nanoparticle heterogeneous catalysts. It is precisely this question and to-date somewhat elusive goal which are addressed by the present work. More specifically, the global hypothesis investigated herein is that the use of speciation-controlled, well-characterized, solid oxide supported-organometallic precatalysts in contact with solution will lead to the next generation of better composition, size- and shape-controlled, as well as highly active and reproducible, supported-nanoparticle heterogeneous catalysts-ones that can also be understood kinetically and mechanistically. Developed herein are eight criteria defining a prototype system for supported-nanoparticle heterogeneous catalyst formation in contact with solution. The initial prototype system explored is the precatalyst, Ir(1,5-COD)Cl/{gamma}-Al{sub 2}O{sub 3} (characterized via ICP, CO adsorption, IR, and XAFS spectroscopies), and the well-defined product, Ir(0){sub n}/{gamma}-Al{sub 2}O{sub 3} (characterized by reaction stoichiometry, TEM, and XAFS). The Ir(0){sub n}/{gamma}-Al{sub 2}O{sub 3} system proved to be a highly active and long-lived catalyst in the simple test reaction of cyclohexene hydrogenation and in comparison to two literature Ir(0){sub n}/Al{sub 2}O{sub 3} heterogeneous catalysts examined under identical conditions. High activity (2.2-4.8-fold higher than that of the literature Ir(0){sub n}/Al{sub 2}O{sub 3} catalysts tested under the same conditions) and good lifetime ({ge} 220,000 total turnovers of cyclohexene hydrogenation) are observed, in part by design since only acetone solvent, cyclohexene, and H{sub 2} are possible ligands in the resultant 'weakly ligated/labile-ligand' supported nanoclusters. Significantly, the Ir(1,5-COD)Cl/{gamma}-Al{sub 2}O{sub 3} + H{sub 2} {yields} Ir(0){sub n}/{gamma}-Al{sub 2}O{sub 3} heterogeneous catalyst formation kinetics were also successfully monitored using the cyclohexene hydrogenation reporter reaction method previously developed and applied to solution-nanoparticle formation. The observed sigmoidal supported-nanoparticle heterogeneous catalyst formation kinetics, starting from the Ir(1,5-COD)Cl/{gamma}-Al{sub 2}O{sub 3} precatalyst, are closely fit by the two-step mechanism of slow continuous nucleation (A {yields} B, rate constant k{sub 1} = 1.5(1.1) x 10{sup -3} h{sup -1}) followed by fast autocatalytic surface growth (A + B {yields} 2B, rate constant k{sub 2} = 1.6(2) x 10{sup 4} h{sup -1} M{sup -1}), where A is the Ir(1,5-COD)Cl/{gamma}-Al{sub 2}O{sub 3} precatalyst and B is the resultant Ir(0){sub n}/{gamma}-Al{sub 2}O{sub 3} catalyst. The kinetics are significant in establishing the ability to monitor the formation of supported-nanoparticle heterogeneous catalysts in contact with solution. They also suggest that the nine synthetic and mechanistic insights from the two-step mechanism of nanoparticle formation in solution should now apply also to the formation of supported-nanoparticle heterogeneous catalysts in contact with solution. The results open the door for new syntheses of supported-nanoparticle heterogeneous catalysts under nontraditional, mild, and flexible conditions where supported organometallics and other precursors are in contact with solution, so that additional variables such as the solvent choice, added ligands, solution temperature, and so on can be used to control the catalyst formation steps and, ideally, the resultant supported-nanoparticle heterogeneous catalyst composition, size, and shape.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Vapor Pressures in the Al(I)+Al2O3(s) System: Reconsidering Al2O3(s) Condensation

The vaporization behavior of the A1-O system has been studied on numerous occasions but significant uncertainties remain. The origin of this uncertainty must be understood before A1-O vaporization behavior can be accurately determined. The condensation of A12O3 and clogging of the effusion orifice is a difficult problem for the Knudsen effusion technique that influences the measured vaporization behavior but has only received limited attention. This study reconsiders this behavior in detail. A new theory for A12O3 condensation is proposed together with procedures that will improve the measured thermodynamic properties of A1-O vaporization.

Copland, Evan↗

The evolution and growth of Al2O3 scales on beta-NiAl

The formation and growth of Al2O3 scales on (beta)-NiAl were studied using electron microscopy and other analytical techniques to gain an understanding of the oxidation properties of (beta)-NiAl and of alumina-forming alloys, in general. The transient and mature stages of oxidation were studied as well as the transformation stage during which the oxide scale transforms from metastable Al2O3 phases to the thermodynamically stable alpha-Al2O3 phase. The transient oxidation stages were studied at 800 deg C and for short times at 1100C. At 800C, the scales consist predominantly of delta-Al2O3 which forms by cation vacancy ordering in the defective spinel lattice of gamma-Al2O3. At 1100C, a fast-growth morphology of theta-Al2O3 forms as a surface layer over delta-Al2O3. For both oxidation temperatures, the scales are often epitaxially oriented with respect to the metal. The transient scales grow by outward cation diffusion as evidenced by surface growth morphologies. The transformation to alpha-Al2O3 occurs within 1 hour at 1100C by a nucleation and radial growth process. The large volume decrease associated with the transformation results in a highly strained alpha-Al2O3 microstructure. A change in scale growth mechanism from outward cation to inward anion diffusion allows transient surface morphologies to be smoothed by surface diffusion. The mature stage of oxidation involves the growth of an alpha-Al2O3 scale having the lacey morphology formed as a result of the gamma yields alpha transformation. Growth of the scale occurs by counterdiffusion along grain boundaries resulting in ridges formed by impingement of alpha-Al2O3 nuclei during the transformation stage. Also scale growth occurs by inward oxygen diffusion through healed cracks; the cracks result from transformation stresses. The measured growth rates of scales having the lacey morphology are an order of magnitude less than fine-grained alpha-Al2O3 scales. Metal orientations were found to have a large effect on oxide morpholoies during all stages of oxidation.

Doychak, J. K.↗

The Role of PentaCoordinated Al3+ Ions in the High Temperature Phase Transformation of γ-Al2O3

In this work, the structural stability of gamma-alumina (γ-Al2O3) was investigated by a combination of XRD and high resolution solid state 27Al MAS NMR at an ultra-high magnetic field of 21.1 tesla. XRD measurements show that γ-Al2O3 undergoes a phase transition to θ-Al2O3 during calcination at 1000oC for 10hr. The formation of the θ-Al2O3 phase is further confirmed by 27Al MAS NMR; additional 27Al peaks centered at 10.5 and ~78 ppm were observed in samples calcined at this high temperature. Both the XRD and NMR results indicate that, after calcination at 1000°C for 10 hrs, the ratio of the θ-Al2O3 phase to the total alumina in samples modified by either BaO or La2O3 is significantly reduced in comparison with γ-Al2O3. 27Al MAS NMR spectra revealed that the reduction in the extent of θ-Al2O3 formation was highly correlated with the reduction in the amount of penta-coordinated aluminum ions, measured after 500°C calcination, in both BaO- and La2O3-modified γ-Al2O3 samples. These results strongly suggest that the penta-coordinated aluminum ions, present exclusively on the surface of γ-Al2O3, play a critical role in the phase transformation of γ-Al2O3 to θ-Al2O3. The role of the modifiers, in our case BaO or La2O3, is to convert the penta-coordinated aluminum ions into octahedral ones, thereby improving the thermal stabilities of the samples. Oxide additives, on the other hand, had no beneficial effect on preventing the specific surface area reduction that occurred during high temperature (≤1000°C) calcination.

27Al MAS NMR↗

Microstructures of ZnO films deposited on (0001) and r-cut α-Al2O3 using metal organic chemical vapor deposition

Zinc oxide films were deposited on (0001) and r-cut α-Al2O3 under identical conditions using metal organic chemical vapor deposition. Microstructures of the ZnO films were studied in detail using conventional and high-resolution transmission electron microscopy (HRTEM), electron diffraction, and HRTEM image simulations. The films deposited on these two substrates show distinctive structural differences. The film grown on r-cut α-Al2O3 shows a high quality single crystal with an orientation relationship of α-Al2O3[-101-1]//ZnO[0001] and α-Al2O3(10-1-2)//ZnO(2-1-10). The interface between the film and the substrate was abrupt and decorated with high density of misfit dislocations. Film grown on α-Al2O3 (0001) shows several orientation domains. Typically, one domain correspond to the classic growth model such that α-Al2O3 (0001)//ZnO(0001) and α-Al2O3 [11-20]//ZnO[10-10]. Another domain corresponds to the growth mode such that α-Al2O3 [11-20]//ZnO[10-10] but the (0001) plane of ZnO is tilted relative to the (0001) plane of α-Al2O3 such that ZnO(0001) is almost parallel to the α-Al2O3 (-1104) plane. This orientation reduces the extent of lattice mismatch as compared with the classic growth mode. The interface between ZnO and α-Al2O3 is abrupt and possesses periodic dislocations.

36 MATERIALS SCIENCE↗

Quantification of High-Temperature Transition Al2O3 and Their Phase Transformations

High temperature exposure of ?-Al2O3 can lead to a series of polymorphic transformations, including the formation of ?-Al2O3 and ?-Al2O3. Quantification of the microstructure in the ?/?-Al2O3 formation range represents a formidable challenge as both phases accommodate a high degree of structural disorder. In this work, we explore the use of XRD recursive stacking formalism for quantification of high temperature transition aluminas. We formulate the recursive stacking methodology for modelling of disorder in ?-Al2O3 and twinning in ?-Al2O3 and show that explicitly accounting for the disorder is necessary to reliably model the XRD patterns of high temperature transition alumina. In the second part, we use the recursive stacking approach to study phase transformation during high temperature (1050 ºC) treatment. We show that the two different intergrowth modes of ?-Al2O3 have different transformation characteristics, and that a significant portion of ?-Al2O3 is stabilized with ?-Al2O3 even after prolonged high-temperature exposures. In discussions, we outline the limitation of the current XRD approach and discuss a possible multimodal XRD and NMR approach which can improve analysis of complex transition aluminas. This work was performed in the Wiley Environmental Molecular Sciences Laboratory (EMSL), a national scientific user facility sponsored by DOEs Office of Biological and Environmental Research and located at PNNL. The work was supported by the U.S. Department of Energy (DOE), Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences.

Kovarik, Libor↗

First-principles Analysis of NOx Adsorption on Anhydrous γ-Al2O3 Surfaces

The interaction of nitrogen oxides NOx (x=1-3) with gamma Al2O3 has been investigated using first-principles density functional theory calculations. NO and NO2 weakly physisorb on the clean, dehydrated (100) and (110) surfaces of gamma Al2O3, whereas the adsorption of the NO3 radical is rather strong. Only the basic-like O-down adsorption configurations were found to be stable. The interaction between NOx and gamma Al2O3 can be described as a surface mediated electron transfer process. For single NOx adsorption, greater electron transfer from the surface to the adsorbate (negatively charged) yields stronger interactions between NOx and the surface. The adsorption of four combinations of NOx+NOy (x=1-3, y=2, 3) pairs on the (100) and the (110) facets of gamma Al2O3 were investigated. Except for the NO2+NO2 pair, a strong cooperative effect that substantially enhances the stability of NOx on both gamma Al2O3 surfaces was found. This cooperative effect consists of surface-mediated electron transfer processes resulting in a favorable electrostatic interaction between two adsorbed NOx species. The pair was found to be the thermodynamically most stable state among the co-adsorbed NOx+NOy pairs on both gamma Al2O3 surfaces. The results are used to analyze the experimentally observed NOx evolution during temperature programmed desorption from NO2-saturated gamma Al2O3 substrates. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adsorption and Formation of BaO Overlayers on Gamma-Al2O3 Surfaces

First-principles density functional theory slab calculations were used to investigate adsorption, clustering and overlayer formation of BaO on the gamma-Al2O3 surfaces. Multiple stable adsorption configurations were identified for the adsorbed BaO molecule and (BaO)2 on both (100) and (110) surfaces of gamma-Al2O3. Adsorption of BaO and (BaO)2 induces significant relaxation of the gamma-Al2O3 surfaces. At high BaO coverage, up to the ratio of BaO units to surface Al atoms being unity, the adsorbed BaO molecules were organized to form a buckled monolayer-like overlayer on the surface. Aggregation energy was used to characterize the organization of adsorbed BaO on the surface. Our results showed that the initial BaO adsorption configuration had a strong effect on clustering and overlayer formation. A weakly adsorbed BaO molecule will thermodynamically favor clustering over being isolated. On the fully dehydrated gamma-Al2O3(100) surface, the formation of BaO overlayer was thermodynamically unfavorable until 4.26 BaO/nm2 if the additional BaO was from the most stable site, corresponding to a low BaO loading, whereas aggregation became favorable if the additional BaO was from less stable sites, corresponding to a high BaO loading. On the fully dehydrated gamma-Al2O3(110) surface, the formation of a BaO dimer was found to have the highest energy cost. On the other hand, the presence of hydroxyls on the surface enhances the stability of the adsorbed BaO molecules. As such, isolated BaO islands, rather than a complete BaO overlayer, were expected on the hydroxylated gamma-Al2O3 surfaces, consistent with recent experimental observations. Pacific Northwest National Laboratory operated by Battelle for the U. S. Department of Energy.

36 MATERIALS SCIENCE↗

A FeCrAl-Al2O3 Composite Produced via Laser Powder Bed Fusion of a Mixed Powder for Porous Catalyst Scaffolds

This study proposes a novel approach for synthesizing and etching bicontinuous FeCrAl-Al2O3 composites as a means for replacing FeCrAl foams as catalyst scaffolds in bio-driven alcohol reactors for jet-fuel production. Conventional FeCrAl foams suffer from poor availability and consequent high costs. New additive manufacturing techniques provide an opportunity to produce tailored foams in reasonable times and at acceptable costs. This research aimed to generate a porous FeCrAl structure by etching a bicontinuous FeCrAl-Al2O3 composite produced by laser powder bed fusion of amalgamated FeCrAl and Al2O3 powders. The composite powder for laser powder bed fusion is created by ball-milling FeCrAl and Al2O3 powders. This research focuses on achieving a bi-continuous FeCrAl-Al2O3 structure, essential for the selective removal of the ceramic phase. The influence of laser processing parameters on the microstructure was examined across a range of laser powers (60-120 W) and scan speeds (100-400 mm/s), showing that higher powers and speeds produce finer metal struts. A bi-continuous microstructure was consistently obtained, marking a key achievement. The Al2O3 removal process involved a two-step etching method using hydrochloric and phosphoric acids, tested across various etching times. The alumina phase was reduced from 36 vol% to 17 vol% (corresponding to an increase in porosity from 24 vol% to 43 vol%), showing the potential for use as a porous catalyst scaffold. This research demonstrates the potential for using additive manufacturing to produce porous FeCrAl structures capable of replacing hard-to-source FeCrAl foams.

Son, Kwangtae↗

Atomic layer deposition of Al2O3 on V2O5 xerogel film for enhanced lithium-ion intercalation stability

V2O5 xerogel films were fabricated by casting V2O5 sols onto fluorine-doped tin oxide glass substrates at room temperature. Five, ten and twenty atomic layers of Al2O3 were grown onto as-fabricated films respectively. The bare film and Al2O3-deposited films all exhibited hydrous V2O5 phase only. Electrochemical impedance spectroscopy study revealed increased surface charge-transfer resistance of V2O5 films as more Al2O3 atomic layers were deposited. Lithium-ion intercalation tests at 600 mAg_1 showed that bare V2O5 xerogel film possessed high initial discharge capacity of 219 mAhg_1 but suffered from severe capacity degradation, i.e., having only 136 mAhg_1 after 50 cycles. After deposition of ten atomic layers of Al2O3, the initial discharge capacity was 195 mAhg_1 but increased over cycles before stabilizing; after 50 cycles, the discharge capacity was as high as 225 mAhg_1. The noticeably improved cyclic stability of Al2O3-deposited V2O5 xerogel film could be attributed to the improved surface chemistry and enhanced mechanical strength. During repeated lithium-ion intercalation/de-intercalation, atomic layers of Al2O3 which were coated onto V2O5 surface could prevent V2O5 electrode dissolution into electrolyte by reducing direct contact between active electrode and electrolyte while at the same time acting as binder to maintain good mechanical contact between nanoparticles inside the film. VC 2012 American Vacuum Society.

36 MATERIALS SCIENCE↗

Synchronously pumped mode-locked Ti:Al2O3 lasers

Synchronously pumped mode-locked laser operation in a Ti:Al2O3 ring laser is demonstrated. The laser pump source was a frequency-doubled Nd:YAG laser-amplifier system producing a 60-micron-long macropulse that comprised a wavetrain of mode-locked 70-ps micropulses with a 10-ns spacing (100 MHz). The Ti:Al2O3 laser consisted of a 1-cm-long crystal with faces cut at the Brewster angle and placed in a ring laser cavity configuration with a 2 percent output coupling mirror. The cavity was adjusted for a 5-ns round trip transit time, which was close to half the temporal spacing of the pump pulse. When the crystal was pumped synchronously at 532 nm with a 30-mJ macropulse, which was approximately an order of magnitude above the laser threshold, mode-locked lasing at approximately 200 MHz was obtained. This macropulse pump energy corresponds to an average micropulse pump energy of about 5 microJ at the Ti:Al2O3 crystal face. The mode-locked operation of the Ti:Al2O3 was observed only after several microseconds into the macropulse, indicating a long build-up process over many cavity trips. During this time, relaxation oscillations were observed. When mode locking started, the relaxation oscillation frequency increased by an order of magnitude. Synchronous pumping has been limited to operation with dye lasers and used either a CW or pulsed mode-locked pump source. Recent work has demonstrated CW mode-locked operation of a Ti:Al2O3 laser. The result raises the possibility that pulsed synchronous pumping may be used to obtain significantly narrowed laser pulses in Ti:Al2O3.

Source record↗

Dissecting the steps of CO2 reduction: 1. The interaction of CO and CO2 with γ-Al2O3: an in situ FTIR study

The adsorption of CO2 and CO was investigated on a pure γ-Al2O3 support material that has been used for the preparation of Pd and Ru catalysts for the catalytic reduction of CO2. The adsorption of CO2 resulted in the formation of carbonates, bicarbonates and linearly adsorbed CO2 species. The amount and the nature of the adsorbed species were dependent on the annealing temperature of the alumina support. On γ-Al2O3 annealed at 473 K mostly bicarbonates formed, while no adsorbed CO2 was seen on this highly hydroxylated surface. With increasing calcinations temperature, i.e., increasing extent of dehydroxylation, the amounts of both surface nitrates and linear adsorbed CO2 increased, but still the most abundant surface species were bicarbonates. Surface carbonates and adsorbed CO2 can readily be removed from the alumina surface, while bicarbonates are stable to elevated temperatures. The interaction of CO with γ-Al2O3 is much weaker than that of CO2. At room temperatures CO adsorbs only on Lewis acid sites, and can be readily removed by evacuation. At 100 K CO can probe different defect sites on the alumina surface (both Lewis acid sites and surface hydroxyls). Under no conditions we have observed the formation of any carbonates or bicarbonates upon the interaction of CO with the pure alumina support. In co-adsorption experiments CO competes for adsorption sites with the linearly adsorbed CO2 on the 773 K-annealed γ-Al2O3 surface; but it does not result in the desorption of CO2, rather in the increase of weakly-held carbonate production. After the removal of adsorbed CO, CO2 moves back to its original adsorption sites, i.e., Lewis acidic Al3+ centers. The exposure of a CO2-saturated γ-Al2O3 to H2O did not affect any of the adsorbed surface species. The findings of this study will be used to rationalize the results of our ongoing in situ and in operando studies on the reduction of CO2 on supported Pd and Ru catalysts. Acknowledgements: We gratefully acknowledge the US Department of Energy Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences for the support of this work. The synthesis and catalyst pre-treatment portion of the work described in this manuscript was supported by a Laboratory Directed Research and Development (LDRD) project at the Pacific Northwest National Laboratory (PNNL). PNNL is operated for the US DOE by Battelle Memorial Institute. J.H.K. also acknowledges the support of this work by the 2013 Research Fund of UNIST (Ulsan National Institute of Science and Technology, Ulsan, Korea).

CO and CO2 adsorption↗