Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ambient Weathering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

Unifying the Validation of Ambient Solar Wind Models

Progress in space weather research and awareness needs community-wide strategies and procedures to evaluate our modeling assets. Here we present the activities of the Ambient Solar Wind Validation Team embedded in the COSPAR ISWAT initiative. We aim to bridge the gap between model developers and end-users to provide the community with an assessment of the state-of-the-art in solar wind forecasting. To this end, we develop an open online platform for validating solar wind models by comparing their solutions with in situ spacecraft measurements. The online platform will allow the space weather community to test the quality of state-of-the-art solar wind models with unified metrics providing an unbiased assessment of progress over time. In this study, we propose a metadata architecture and recommend community-wide forecasting goals and validation metrics. We conclude with a status update of the online platform and outline future perspectives.

Space weather↗
NASA NTRS2005

STS-114: Discovery Launch Readiness Press Conference

Michael Griffin, NASA Administrator; Wayne Hale, Space Shuttle Deputy Program Manager; Mike Wetmore, Director of Shuttle Processing; and 1st Lieutenant Mindy Chavez, Launch Weather Officer-United States Air Force 45th Weather Squadron are in attendance for this STS-114 Discovery launch readiness press conference. The discussion begins with Wayne Hale bringing to the table a low level sensor device for everyone to view. He talks in detail about all of the extensive tests that were performed on these sensors and the completion of these ambient tests. Chavez presents her weather forecast for the launch day of July 26th 2005. Michael Griffin and Wayne Hale answer questions from the news media pertaining to the sensors and launch readiness. The video ends with footage of Pilot Jim Kelly and Commander Eileen Collins conducting test flights in a Shuttle Training Aircraft (STA) that simulates Space Shuttle landing.

Source record↗
DOE OSTI2023

Citizen and machine learning-aided high-resolution mapping of urban heat exposure and stress

Abstract Through conversion of land cover to more built-up, impervious surfaces, cities create hotter environments than their surroundings for urban residents, with large differences expected between different parts of the city. Existing measurements of ambient air temperature and heat stress, however, are often insufficient to capture the intra-urban variability in heat exposure. This study provides a replicable method for modeling air temperature, humidity, and moist heat stress over the urban area of Chapel Hill while engaging citizens to collect high-temporal and spatially-resolved air temperature and humidity measurements. We use low-cost, consumer-grade sensors combined with satellite remote sensing data and machine learning to map urban air temperature and relative humidity over various land-cover classes to understand intra-urban spatial variability of ambient heat exposure at a relatively high resolution (10 m). Our findings show that individuals may be exposed to higher levels of air temperature and moist heat stress than weather station data suggest, and that the ambient heat exposure varies according to land cover type, with tree-covered land the coolest and built-up areas the warmest, and time of day, with higher air temperatures observed during the early afternoon. Combining our resulting dataset with sociodemographic data, policymakers and urban planners in Chapel Hill can use data output from this method to identify areas exposed to high temperature and moist heat stress as a first step to design effective mitigation measures.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2005

Aerogel Insulation Systems for Space Launch Applications

New developments in materials science in the areas of solution gelation processes and nanotechnology have led to the recent commercial production of aerogels. Concurrent with these advancements has been the development of new approaches to cryogenic thermal insulation systems. For example, thermal and physical characterizations of aerogel beads under cryogenic-vacuum conditions have been performed at the Cryogenics Test Laboratory of the NASA Kennedy Space Center. Aerogel-based insulation system demonstrations have also been conducted to improve performance for space launch applications. Subscale cryopumping experiments show the thermal insulating ability of these fully breathable nanoporous materials. For a properly executed thermal insulation system, these breathable aerogel systems are shown to not cryopump beyond the initial cooldown and thermal stabilization phase. New applications are being developed to augment the thermal protection systems of space launch vehicles, including the Space Shuttle External Tank. These applications include a cold-boundary temperature of 90 K with an ambient air environment in which both weather and flight aerodynamics are important considerations. Another application is a nitrogen-purged environment with a cold-boundary temperature of 20 K where both initial cooldown and launch ascent profiles must be considered. Experimental results and considerations for these flight system applications are discussed.

Fesmire, James E.↗
DOE OSTI2025

Quantifying and simulating the weather forecast uncertainty for advanced building control

Weather forecast uncertainty is unavoidable despite technological advancements. Accurately quantifying and modelling this uncertainty is essential for developing and comparing advanced building controllers. In this study, we present a structured approach using a first-order autoregressive model (AR(1)) to model uncertainty in ambient temperature and global solar irradiation (GHI) forecasts. We analyzed weather data from four cities and employed Jensen–Shannon divergence (JSD) to evaluate the similarity between synthetic and actual forecast errors. The average JSD values for temperature are 0.027 (Berkeley), 0.021 (Leuven), 0.018 (Berlin), and 0.008 (Oslo), and for GHI, the average JSD values are 0.016 (Berkeley), 0.058 (Leuven), and 0.013 (Berlin). The low JSD values indicate a high similarity between the synthetic and real forecast error distributions. Further, our approach successfully generates synthetic weather forecasts that mirror the statistical properties of actual forecasts. The implementation of our method for uncertain forecast generation is being added to the BOPTEST framework.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

A numerical simulation of CCN impacts on weather modification efficiency

Aerosols affect development of clouds and precipitation by serving as cloud condensation nuclei (CCN) and ice nuclei (IN). Considering the dramatically changing ambient aerosol concentration, it is important to examine the potential “side effect” of aerosol pollution on precipitation enhancement by weather modification. In this study, the cloud seeding was performed on a precipitation event in Beijing in the summer of 2008, which is simulated by the NSSL two-moment cloud scheme of the Weather Research and Forecasting (WRF) model. Sensitivity tests were conducted by modifying the ambient aerosol concentration and the ice crystal seeding amount to investigate the cloud seeding efficacy in different CCN concentration scenarios. There was a slight difference in the precipitation distribution between the simulations with two ambient CCN concentrations: the northern precipitation center in polluted scenario was weaker and the southern center was stronger. Compared with normal CCN scenario, the cloud liquid water mass and ice crystal mass in the severe pollution scenario is larger, and the total contents of snow and graupel were not sensitive to the CCN concentration. With the same amount of man-made ice crystals seeding, the precipitation enhancement was quite different under different CCN conditions. The higher the CCN concentration usually leads to stronger precipitation suppression. As CCN concentration increase, the deposition growth of snow, auto-conversion and accretion of ice crystals to snow were weakened, as well as the conversion of melting snow and graupel into rainwater.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2009

Using Volcanic Ash to Remove Dissolved Uranium and Lead

Experiments have shown that significant fractions of uranium, lead, and possibly other toxic and/or radioactive substances can be removed from an aqueous solution by simply exposing the solution, at ambient temperature, to a treatment medium that includes weathered volcanic ash from Pu'u Nene, which is a cinder cone on the Island of Hawaii. Heretofore, this specific volcanic ash has been used for an entirely different purpose: simulating the spectral properties of Martian soil. The treatment medium can consist of the volcanic ash alone or in combination with chitosan, which is a natural polymer that can be produced from seafood waste or easily extracted from fungi, some bacteria, and some algae. The medium is harmless to plants and animals and, because of the abundance and natural origin of its ingredient( s), is inexpensive. The medium can be used in a variety of ways and settings: it can be incorporated into water-filtration systems; placed in contact or mixed with water-containing solids (e.g., soils and sludges); immersed in bodies of water (e.g., reservoirs, lakes, rivers, or wells); or placed in and around nuclear power plants, mines, and farm fields.

McKay, David S.↗
DOE OSTI2022

Development of Novel Materials for Direct Air Capture of CO 2 : MIL-101(Cr)-Amine Sorbents Evaluation Under Realistic Direct Air Capture Conditions (Final Report)

The overarching goal of this project is to evaluate the CO 2 adsorption properties of a small family of metal-organic framework (MOFs) materials functionalized with amines at sub-ambient conditions. Our goal is to develop capabilities to measure CO 2 adsorption at conditions more relevant to the weather of the planet. For this purpose, Georgia Tech is constructing a “sub-ambient adsorption facility” in partnership with ZCP Sorbent Development, LLC, aimed specifically at rapidly and deeply characterizing the performance of DAC candidate materials in this important operational range (adsorption at -20 to 20 °C and RH of 0-100%). Here, we use the sub-ambient lab instrumentation designed or adapted to study the behavior of the pristine metal organic framework (MOF) MIL-101(Cr) and the MOF in the presence of amines ranging from small molecules (e.g. TREN, tris(2-aminoethylamine)) to oligomers (e.g. PEI, poly(ethyleneimine)). Any DAC sorbent must be amenable to deployment in practical contactors for gas-solid contacting (traditional pellet-based fixed beds are impossible at scale). To this end, we developed and tested these DAC materials in the forms of composite polymer/MOF fibers and custom 3D-printed monolith structures containing MOF DAC sorbents. The proposed studies advance these materials from technology readiness level (TRL) 2 to TRL 3.

01 COAL, LIGNITE, AND PEAT↗
NASA NTRS2019

Forecasting the Ambient Solar Wind with Numerical Models. I. On the Implementation of an Operational Framework

The ambient solar wind conditions in interplanetary space and in the near-Earth environment are determined by activity on the Sun. Steady solar wind streams modulate the propagation behavior of interplanetary coronal mass ejections and are themselves an important driver of recurrent geomagnetic storm activity. The knowledge of the ambient solar wind flows and fields is thus an essential component of successful space weather forecasting. Here, we present an implementation of an operational framework for operating, validating, and optimizing models of the ambient solar wind flow on the example of Carrington Rotation 2077. We reconstruct the global topology of the coronal magnetic field using the potential field source surface model (PFSS) and the Schatten current sheet model (SCS) and discuss three empirical relationships for specifying the solar wind conditions near the Sun, namely the Wang–Sheeley (WS) model, the distance from the coronal hole boundary model (DCHB), and the Wang-Sheeley–Arge (WSA) model. By adding uncertainty in the latitude about the sub-Earth point, we select an ensemble of initial conditions and map the solutions to Earth by the Heliospheric Upwind eXtrapolation (HUX) model. We assess the forecasting performance from a continuous variable validation and find that the WSA model most accurately predicts the solar wind speed time series (RMSE≈83 km/s). We note that the process of ensemble forecasting slightly improves the forecasting performance of all solar wind models investigated. We conclude that the implemented framework is well suited for studying the relationship between coronal magnetic fields and the properties of the ambient solar wind flow in the near-Earth environment.

Reiss, Martin A.↗
DOE OSTI2020

Ambient Synchrophasor Measurement Based System Inertia Estimation

This paper develops an algorithm to estimate the system inertia value based on ambient synchrophasor measurement. Informative features are extracted from ambient synchrophasor measurements for machine-learning-based inertia estimation. Besides ambient synchrophasor measurements of FNET/GridEye, other available data relevant to inertia (such as weather and system load data) are also used to improve the inertia estimation accuracy. Then a machine learning algorithm to estimate system inertia is developed. A test dataset including ambient synchrophasor data from FNET/GridEye measurements and the WECC system inertia data from NERC is used to evaluate the performance of the developed inertia estimation method. The average and maximum estimation errors of the developed inertia estimation method is lower than 5% and 10%, respectively. This accuracy is higher than reported accuracy values in existing literature.

CUI, YI↗
NASA NTRSDate not supplied

Jet Noise Flyover and Scale Model Tests

Renewed interest in commercial supersonic flight has rekindled the need for accurate jet-noise predictions as this source is believed to dominate at aircraft takeoff conditions. The current study compares scale-model data acquired in the NASA Aero-Acoustic Propulsion Laboratory with data obtained using a well-instrumented Learjet 25 in a flyover test completed in September 2022. The flight test included 73 flyovers with engine conditions ranging from 1.5 to 2.0 engine pressure ratios and flight Mach numbers between 0.24 and 0.27. Acoustic data were acquired with an 800-ft linear ground plate microphone array. Wind speed data were acquired up to 1000-ft altitude with a ground-based LiDAR system. Layered ambient temperature, pressure, and humidity were acquired with a weather drone. A 6% increase in the physical scale factor for the scale-model data was found to reasonably align the peak frequencies of the scale-model and flight data and resulted in peak levels for the scale model being roughly 0.7 dB above those for the flight data at NPR = 1.56 and roughly 1 dB below those for the flight data at NPR = 1.91 in the peak jet-noise direction. Comparisons with the SAE ARP876 model were poor especially at emission angles greater than, or equal to, 110° and at high frequencies.

jet noise, supersonic transport↗
NASA NTRSDate not supplied

Jet Noise Flyover and Scale Model Tests

Renewed interest in commercial supersonic flight has rekindled the need for accurate jet-noise predictions as this source is believed to dominate at aircraft takeoff conditions. The current study compares scale-model data acquired in the NASA Aero-Acoustic Propulsion Laboratory with data obtained using a well-instrumented Learjet 25D in a flyover test completed in September 2022. The flight test included 73 flyovers with engine conditions ranging from 1.5 to 2.0 engine pressure ratios and flight Mach numbers between 0.24 and 0.27. Acoustic data were acquired with an 800-ft linear ground plate microphone array. Wind speed data were acquired up to 1000-sft altitude with a ground-based LiDAR system. Layered ambient temperature, pressure, and humidity were acquired with a weather drone. A 6% increase in the physical scale factor for the scale-model data was found to reasonably align the peak frequencies of the scale-model and flight data and resulted in peak levels for the scale model being roughly 0.7 dB above those for the flight data at NPR = 1.56 and roughly 1 dB below those for the flight data at NPR = 1.91 in the peak jet-noise direction. Comparisons with the SAE ARP876 model were poor especially at emission angles greater than, or equal to, 110° and at high frequencies.

Acoustics, jet noise, supersonic transport↗
NASA NTRSDate not supplied

Jet Noise Flyover and Scale Model Tests

Renewed interest in commercial supersonic flight has rekindled the need for accurate jet-noise predictions as this source is believed to dominate at aircraft takeoff conditions. The current study compares scale-model data acquired in the NASA Aero-Acoustic Propulsion Laboratory with data obtained using a well-instrumented Learjet 25 in a flyover test completed in September 2022. The flight test included 73 flyovers with engine conditions ranging from 1.5 to 2.0 engine pressure ratios and flight Mach numbers between 0.24 and 0.27. Acoustic data were acquired with an 800-ft linear ground plate microphone array. Wind speed data were acquired up to 1000-ft altitude with a ground-based LiDAR system. Layered ambient temperature, pressure, and humidity were acquired with a weather drone. A 6% increase in the physical scale factor for the scale-model data was found to reasonably align the peak frequencies of the scale-model and flight data and resulted in peak levels for the scale model being roughly 0.7 dB above those for the flight data at NPR = 1.56 and roughly 1 dB below those for the flight data at NPR = 1.91 in the peak jet-noise direction. Comparisons with the SAE ARP876 model were poor especially at emission angles greater than, or equal to, 110° and at high frequencies.

Acoustics, jet noise, supersonic transport↗
NASA NTRS2011

Spray-On Foam Insulations for Launch Vehicle Cryogenic Tanks

Spray-on foam insulation (SOFI) has been developed for use on the cryogenic tanks of space launch vehicles beginning in the 1960s with the Apollo program. The use of SOFI was further developed for the Space Shuttle program. The External Tank (ET) of the Space Shuttle, consisting of a forward liquid oxygen tank in line with an aft liquid hydrogen tank, requires thermal insulation over its outer surface to prevent ice formation and avoid in-flight damage to the ceramic tile thermal protection system on the adjacent Orbiter. The insulation also provides system control and stability with throughout the lengthy process of cooldown, loading, and replenishing the tank. There are two main types of SOFI used on the ET: acreage (with the rind) and closeout (machined surface). The thermal performance of the seemingly simple SOFI system is a complex of many variables starting with the large temperature difference of from 200 to 260 K through the typical 25-mm thickness. Environmental factors include air temperature and humidity, wind speed, solar exposure, and aging or weathering history. Additional factors include manufacturing details, launch processing operations, and number of cryogenic thermal cycles. The study of the cryogenic thermal performance of SOFI under large temperature differentials is the subject of this article. The amount of moisture taken into the foam during the cold soak phase, termed Cryogenic Moisture Uptake, must also be considered. The heat leakage rates through these foams were measured under representative conditions using laboratory standard liquid nitrogen boiloff apparatus. Test articles included baseline, aged, and weathered specimens. Testing was performed over the entire pressure range from high vacuum to ambient pressure. Values for apparent thermal conductivity and heat flux were calculated and compared with prior data. As the prior data of record was obtained for small temperature differentials on non-weathered foams, analysis of the different methods is provided. Recent advancements and applications of SOFI systems on future launch vehicles and spacecraft are also addressed.

Fesmire, J. E.↗
DOE OSTI2022

Peak Power Minimization for Commercial Thermostatically Controlled Loads in Multi-Unit Grid-Interactive Efficient Buildings

The load profiles of most commercial and industrial consumers are characterized by brief periods of very high power consumption followed by intervals of lower demand. To encourage such consumers to flatten their load profiles, power utilities in and around the world often levy a monthly demand charge (DC) on the peak demand measured over brief intervals. In this work, we consider the joint optimization of energy costs (EC) and the instantaneous peak power of a multi-unit building which uses a hydronic heating, ventilation and cooling (HVAC) system and responds to a demand response (DR) program. Despite the non-linear structure of the problem, we show how optimal solutions can be obtained efficiently using linear programming. Next, we study the power demand patterns resulting from our proposed strategy for thermostatically controlled loads (TCLs), and evaluate the strategy’s performance for various climate zones in the US, under both typical and atypical weather conditions. Finally, the results show that depending on the ambient conditions and the tariff structure, our strategy can result in utility bill savings of up to nearly 19% compared to the baseline. The results also indicate that our power control strategy can significantly reduce the instantaneous peak power consumption in commercial TCLs.

HVAC↗
NASA NTRS2004

Oh! I Slipped the Surly Bounds of Earth....and Ran into Space Weather!

Over the past decade the concept of space weather has been introduced and matured in both the scientific community and popular press. Likewise the concept of space climatology recently also is being advanced. Closely linked to these concepts are their impacts on ground- and space-based technological systems; one such system commonly mentioned is manned space flight exemplified by the Space Shuttle and International Space Station (ISS). From a manned space flight perspective, space weather and space climatology have significant effects on the amount of radiation exposure received by humans in space from the ambient high-energy charged particles present in interplanetary space and trapped in the geomagnetosphere. Whereas the impact of space weather for most technological systems is usually discrete and well correlated in time, the principle impact of space weather and space climatology is to increase the probability of latent cancer formation in thetraveler cohort. In this regard, while space weather may be the dominating factor for a given mission, over the life of a long-term program such as the Space Shuttle or ISS space climatology is the controlling factor of latent cancer risk. Human radiation exposure enhancements associated with space weather disturbances has been a concern among scientist and mission controllers since the inception of manned spaceflight nearly forty years ago. This led NASA to develop, in conjunction with the Environmental Science Services Administration s Space Disturbance Forecast Center and the USAF/AWS, the Solar Particle Alert Network (SPAN)-the foundation of an initial U.S. space weather monitoring and forecasting service. Since Apollo, routine space flight operations have evolved to include the use of space weather and climatology data provided through a world-wide network of operational space weather data services to predict and recommend actions to minimize astronaut radiation exposures. NASA Space Radiation Analysis Group (SRAG) flight controllers use real-time space weather data to detect and assess the impact of solar particle events, outer electron belt enhancements, the formation of pseudo-stable additional trapped radiation belts, and the solar cycle modulation of trapped radiation belts and galactic cosmic rays. Energetic particle data from GOES spacecraft are automatically ingested from NOAA Space Environment Center data servers and used to drive a model for the estimating the exposure to astronauts from solar particle events. While adequate for current manned space flight support, the existing operational space weather support system requires improvements to address the anticipated evolution in both the character of manned missions as well as space flight operations management. Necessary space weather data improvements include: reliably available (near) real-time space weather data on a fixed schedule via redundant access methods that support autonomous data acquisition by computer systems behind enterprise firewalls; and rapid transition of promising research sensors into operational systems.

Golightly, Michael J.↗
NASA NTRS1995

Charged Particle Alterations of Surfaces in the Solar System

The surfaces of 'airless' bodies in the solar system are exposed to the ambient plasma, micrometeorites, and the solar UV. The effects of these space weathering agents on surfaces in the solar system has been studied in this project. In the last three years work was carried out on volatile depletion at Mars, on sputtering of the lunar surface, on absorption by implanted S in vapor-deposited H2O and its relevance to observations of Europa's surface in the UV, and on the spectral changes produced on irradiating SO2 and its possible relevance to Io. In addition, the role of plasma-induced charging of E-ring grains was evaluated because of its relevance to E-ring particle source and the lifetime of the E-ring. Finally, the detection of sputtered material from Dione by the CAPS instrument on CASSINI was evaluated as a tool for analysis of satellite surface composition, and the role of sputtering on the ambient OH in the vicinity of the ice satellites and the E-ring was evaluated.

Johnson, R. E.↗
DOE OSTI2025

Influence of extreme temperature conditions on CO 2 direct air capture using amino-acid solutions

Geological features play a pivotal role in determining the feasibility of deploying CO₂ direct air capture (DAC) technologies, primarily because they influence the availability of cost-effective energy sources, such as natural gas and geothermal energy, and also due to the potential for CO₂ sequestration. Many regions face challenges due to variable weather conditions including seasonal temperature fluctuations, high or low humidity, and sub-ambient temperatures. These extremes can reduce DAC performance or even lead to catastrophic events. Aqueous solvents considered for DAC systems are particularly vulnerable to seasonal variations in colder climates, where the solvent may underperform or freeze. It is therefore essential to investigate the CO₂ capture efficiency of aqueous solvents across a broad range of environmental temperatures, spanning sub-zero to hot conditions (>30 °C). In this study, DAC operation is examined using a high-flux solvent–air crossflow contactor under two major weather scenarios: (i) cold conditions below 0 °C and (ii) hot conditions above 30 °C. A parametric study is conducted to investigate the contactor performance regarding CO₂ removal efficiency, uptake capacity, and reaction kinetics versus temperature when the air velocity through the contactor exceeds 1 m/s. The efficacy of the contactor is systematically investigated using various anti-freeze amino-acid solvent formulations. A mass-transfer mechanistic model is developed to assess the process performance over a wide temperature range and propose scalable design guidelines. Machine learning is also employed to identify key parameters affecting the CO₂ capture efficiency. It is shown that air velocity and temperature are the primary factors influencing CO₂ uptake. Based on performance data obtained under subfreezing temperatures, a technoeconomic analysis is conducted to evaluate the feasibility of using aqueous solvents in seasonal cold regions. In conclusion, the findings of this study provide valuable insights into siting considerations for deploying solvent-based DAC, thereby contributing to the advancement of sustainable carbon removal solutions.

Air–liquid contactor↗