A linearized approach to waves in a dilute, chemically reacting atmosphere. Part 1 - Analytical treatment
Linearized approach to waves in dilute, chemically reacting atmosphere
Eberstein, I. J.↗
SEARCH · Search NASA
Results for “Analytic linearization”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Solar Temperature Variations Computed from SORCE SIM Irradiances Observed During 2003-2020
NASA’s Solar Radiation and Climate Experiment (SORCE) Spectral Irradiance Monitor (SIM) instrument produced about 17 years of daily average Spectral Solar Irradiance ( SSI ) data for wavelengths 240 nm – 2416 nm. We choose a day of minimal solar activity, 2008-08-24, during the 2008 − 2009 minimum between cycles 23 and 24, and compute the brightness temperature (𝑇 o ) from that day’s solar spectral irradiance (𝑆𝑆𝐼 o ). We consider small variations of T and SSI about these reference values, and derive linear and quadratic analytic approximations by Taylor expansion about the reference day values. To determine approximation accuracy, we compare to exact brightness temperatures T computed from the Planck spectrum, by solving analytically for T , or equivalent root-finding in Wolfram Mathematica. We find that the linear analytic approximation overestimates, while the quadratic underestimates the exact result. This motivates search for statistical “fit” models “in between” the two analytic models, with minimum root-mean-square-error RMSE. We make this search using open-source statistical R software, determine coefficients for linear and quadratic fit models, and compare statistical with analytic RMSE’s. When only linear analytic and fit models are compared, the fit model is superior at ultraviolet, visible, and near infrared wavelengths. This again holds true when comparing only quadratic models. Quadratic is superior to linear for both analytic and statistical models, and statistical fits give smallest RMSE’s. Lastly, we use linear analytic and fit models to find an interpolating function in wavelength, useful in case the SIM results need adjustment to another choices of wavelengths, to compare or extend to any other instrument.
SORCE↗
Analytic potential in a linear radio-frequency quadrupole trap with cylindrical electrodes
An analytical expression is derived for a radio-frequency ion trap of novel configuration consisting of a four-sectored hollow cylinder enclosed between two end caps. The cylindrical geometry of the sectored trap provides shielding against the buildup of charge and also makes it possible to calculate the potential within the trap by solving Laplace's equation for given boundary conditions. Equations are presented for calculating the time-averaged potential generated by the RF fields, the end-cap potential, and the potential arising from the application of a dc bias on two of the four electrode sectors. It is shown that, near the ends of this trap, the effective potential arising from the RF fields acts to propel ions out of the trap and that the addition of a dc bias on two neighboring sectors generates an inhomogeneous field in the trap which produces a force on the ions along the trap's long axis in a direction dependent on the sign of the bias.
Melbourne, R. K.↗
Criteria of chaos in non-linear mechanics
Analytical criteria are derived for the geometrical interpretation (Zak, 1985) of the transition to chaos in nonlinear mechanical systems. The concept of orbital instability in configuration space is employed in the analysis, and the differences between chaotic instability and classical Liapunov instability are explored. The case of a symmetric rigid body rotating about its center of gravity is considered as an example, and the applicability of the present approach to noninertial motion or to continua is discussed.
Zak, M.↗
Overshooting thunderstorm cloud top dynamics as approximated by a linear Lagrangian parcel model with analytic exact solutions
Results are presented from a linear Lagrangian entraining parcel model of an overshooting thunderstorm cloud top. The model, which is similar to that of Adler and Mack (1986), gives analytic exact solutions for vertical velocity and temperature by representing mixing with Rayleigh damping instead of nonlinearly. Model results are presented for various combinations of stratospheric lapse rate, drag intensity, and mixing strength. The results are compared to those of Adler and Mack.
Schlesinger, Robert E.↗
Two-body linear guidance matrices
Analytical expressions for two-body linear guidance matrices in velocity dependent coordinate system for variant motion equation solutions
COORDINATE SYSTEM↗
Analytic study of a depressed collector for linear beam microwave amplifiers Final report
Analytic evaluation of depressed collector for linear beam microwave amplifiers
Mihran, T. G.↗
An optimal, analytic solution to the linear- gravity, constant-thrust trajectory problem
Constant-thrust trajectory problem with gravitational acceleration as linear function of radius vector, obtaining minimum fuel solution in integrals
Jezewski, D. J.↗
Approximate analytic solutions for singular non-linear oscillators
Mickens (1981, 1984) has considered analytic techniques for obtaining approximate solutions to one-dimensional nonlinear oscillatory systems x(double-dot) + x = lambda f(x, x/dot/, lambda) where lambda is a small positive parameter and f is a nonlinear polynomial function of its arguments. However, in certain cases there is interest in the analysis of physical systems for which the nonlinear function f(x, x/dot/, lambda) is singular for finite values of x or x(dot). The present investigation is concerned with the use of existing approximate analytic schemes to obtain solutions to singular nonlinear oscillatory differential equations.
Bota, K. B.↗
Optimization of a certain quality of complete controllability and observability for linear dynamical systems.
Analytical measure of quality of controllability for linear dynamic system and computational procedure for maximizing adjustable structural parameters
Johnson, C. D.↗
An analytical and experimental investigation of output feedback vs. linear quadratic regulator
This paper presents analytical and experimental comparison of three control laws for a laboratory structure designed to simulate large space structures. The first control law is the standard time invariant linear quadratic regulator with state estimation, which requires model reduction for practical implementation. This model reduction is associated with the so-called spillover instability. Two new simple direct output feedback control laws guaranteeing stability are proposed. One minimizes the maximum control force, and the other minimizes the same quadratic performance index as the linear quadratic regulator. The three control laws are found to give comparable performance for the modes retained in the reduced model. However, the standard linear quadratic regulator with state estimation provides almost no margin of stability for the unmodeled modes, while the simpler direct feedback laws provide significant stability margins to all modes. The analytical results were verified experimentally using a digital implementation of the control laws. Good agreement between the analytical predictions and experimental measurements was observed.
Martinovic, Zoran N.↗
Analytical Solutions for Non-Linear Differential Equations with the Help of a Digital Computer
A technique was developed with the help of a digital computer for analytic (algebraic) solutions of autonomous and nonautonomous equations. Two operational transform techniques have been programmed for the solution of these equations. Only relatively simple nonlinear differential equations have been considered. In the cases considered it has been possible to assimilate the secular terms into the solutions. For cases where f(t) is not a bounded function, a direct series solution is developed which can be shown to be an analytic function. All solutions have been checked against results obtained by numerical integration for given initial conditions and constants. It is evident that certain nonlinear differential equations can be solved with the help of a digital computer.
Cromwell, P. C.↗
An accurate analytic approximation to the non-linear change in volume of solids with applied pressure
An accurate analytic expression for the nonlinear change of the volume of a solid as a function of applied pressure is of great interest in high-pressure experimentation. It is found that a two-parameter analytic expression, fits the experimental volume-change data to within a few percent over the entire experimentally attainable pressure range. Results are presented for 24 different materials including metals, ceramic semiconductors, polymers, and ionic and rare-gas solids.
Schlosser, Herbert↗
A methodology for using nonlinear aerodynamics in aeroservoelastic analysis and design
A methodology is presented for using the Volterra-Wiener theory of nonlinear systems in aeroservoelastic (ASE) analyses and design. The theory is applied to the development of nonlinear aerodynamic response models that can be defined in state-space form and are, therefore, appropriate for use in modern control theory. The theory relies on the identification of nonlinear kernels that can be used to predict the response of a nonlinear system due to an arbitrary input. A numerical kernel identification technique, based on unit impulse responses, is presented and applied to a simple bilinear, single-input-single-output system. The linear kernel (unit impulse response) and the nonlinear second-order kernel of the system are numerically-identified and compared with the exact, analytically-defined linear and second-order kernels. This kernel identification technique is then applied to the CAP-TSD code for identification of the linear and second-order kernels of a NACA64A010 rectangular wing undergoing pitch at M = 0.5, M = 0.85 (transonic), and M = 0.93 (transonic). Results presented demonstrate the feasibility of this approach for use with nonlinear, unsteady aerodynamic responses.
Silva, Walter A.↗
Analytical and Numerical Results for an Adhesively Bonded Joint Subjected to Pure Bending
A one-dimensional, semi-analytical methodology that was previously developed for evaluating adhesively bonded joints composed of anisotropic adherends and adhesives that exhibit inelastic material behavior is further verified in the present paper. A summary of the first-order differential equations and applied joint loading used to determine the adhesive response from the methodology are also presented. The method was previously verified against a variety of single-lap joint configurations from the literature that subjected the joints to cases of axial tension and pure bending. Using the same joint configuration and applied bending load presented in a study by Yang, the finite element analysis software ABAQUS was used to further verify the semi-analytical method. Linear static ABAQUS results are presented for two models, one with a coarse and one with a fine element meshing, that were used to verify convergence of the finite element analyses. Close agreement between the finite element results and the semi-analytical methodology were determined for both the shear and normal stress responses of the adhesive bondline. Thus, the semi-analytical methodology was successfully verified using the ABAQUS finite element software and a single-lap joint configuration subjected to pure bending.
Smeltzer, Stanley S., III↗
Hierarchy of simulation models for a turbofan gas engine
Steady-state and transient performance of an F-100-like turbofan gas engine are modeled by a computer program, DYNGEN, developed by NASA. The model employs block data maps and includes about 25 states. Low-order nonlinear analytical and linear techniques are described in terms of their application to the model. Experimental comparisons illustrating the accuracy of each model are presented.
Longenbaker, W. E.↗
A high-precision ab initio determination of the equilibrium geometry and force field of HOC(+)
The results of an ab initio molecular orbital investigation of the isoformyl cation, HOC(+), shape are reported. The effects of expanding the basis set to near the Hartree-Fock limit and of electron correlation were examined, and the results indicate that near the Hartree-Fock limit the HOC(+) is linear. An analytic potential function is presented, from which the calculated rotational energies are only 0.03 percent different from the experimental values. This represents a nearly two orders of magnitude reduction in error from earlier work.
Defrees, D. J.↗
Computational fluid dynamic analysis of liquid rocket combustion instability
The paper presents a computational analysis of liquid rocket combustion instability. Consideration is given to both a fully nonlinear unsteady calculation as well as a new CFD-based linearized stability analysis. An analytical solution for the linear stability problem in a constant area combustion chamber with uniform mean flow is developed to verify the numerical analyses.
Venkateswaran, Sankaran↗