SEARCH · Search NASA

Results for “Angle Measurement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

DOE OSTI2026

Temperature-dependent dielectric function of tantalum nitride formed by atomic layer deposition for tunnel barriers in Josephson junctions

Here, we report the dielectric functions of insulating tantalum nitride (TaN) films deposited by atomic layer deposition (ALD) on 300 mm Si/SiO 2 substrates to evaluate their suitability as tunnel barriers in tantalum-based Josephson junctions (JJs) for superconducting quantum circuits. Temperature-dependent ellipsometric angles were measured for ALD TaN films with nominal thicknesses of 13 and 25 nm at an incidence angle of 70°, over photon energy ranges of 0.03–0.7 eV (80–300 K) and 0.5–6.5 eV (80–600 K). These data were used to develop a dispersion model for insulating ALD TaN that incorporates a Tauc–Lorentz oscillator with an optical bandgap of 1.5–1.8 eV to describe interband transitions. The extracted dielectric function shows insulating behavior (mid-infrared transparency) at all temperatures and for both film thicknesses tested. In particular, ALD TaN does not exhibit infrared absorption due to free carriers, even at elevated temperatures, consistent with the insulating behavior required for a JJ tunnel barrier. Results from transmission electron microscopy (including selected area electron diffraction) and x-ray diffraction are also discussed. Sputter depth-profile x-ray photoelectron spectroscopy shows an N/Ta ratio of ∼1.2 throughout the film. The lower bandgap, low roughness, and thermal stability of ALD TaN compared to AlO x suggest the possibility of fabricating JJs with thicker barriers while achieving critical current densities required for qubits, enabling improved thickness and composition control, reduced topography, and resistance to aging.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Detecting underscreening and generalized Kirkwood transitions in aqueous electrolytes

We establish the connection between the measured small angle x-ray scattering signal and the charge–charge correlations underlying Kirkwood transitions (KTs) in 1:1, 2:1, and 3:1 aqueous electrolytes. These measurements allow us to obtain underscreening lengths for bulk electrolytes independently verified by theory and simulations. Furthermore, we generalize the concept of KTs beyond those theoretically predicted for 1:1 electrolytes, which involves the inverse screening length, a 0 , and the inverse periodicity length, Q 0 . Above the KTs, we find a universal scaling of a 0 ∝ c – $\sqrt{ζ/3}$ and Q 0 ∝ c 1/3 for the studied electrolyte solutions, where ζ is the ionic strength factor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Generalized symmetry in dynamical gravity

We explore generalized symmetry in the context of nonlinear dynamical gravity. Our basic strategy is to transcribe known results from Yang-Mills theory directly to gravity via the tetrad formalism, which recasts general relativity as a gauge theory of the local Lorentz group. By analogy, we deduce that gravity exhibits a one-form symmetry implemented by an operator U α labeled by a center element α of the Lorentz group and associated with a certain area measured in Planck units. The corresponding charged line operator W ρ is the holonomy in a spin representation ρ, which is the gravitational analog of a Wilson loop. The topological linking of U α and W ρ has an elegant physical interpretation from classical gravitation: the former materializes an exotic chiral cosmic string defect whose quantized conical deficit angle is measured by the latter. We verify this claim explicitly in an AdS-Schwarzschild black hole background. Notably, our conclusions imply that the standard model exhibits a new symmetry of nature at scales below the lightest neutrino mass. More generally, the absence of global symmetries in quantum gravity suggests that the gravitational one-form symmetry is either gauged or explicitly broken. The latter mandates the existence of fermions. Finally, we comment on generalizations to magnetic higher-form or higher-group gravitational symmetries.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2024

Characterization of MoS 2 films via simultaneous grazing incidence X-ray diffraction and grazing incidence X-ray fluorescence (GIXRD/GIXRF)

Physical vapor deposited (PVD) molybdenum disulfide (nominal composition MoS 2 ) is employed as a thin film solid lubricant for extreme environments where liquid lubricants are not viable. The tribological properties of MoS 2 are highly dependent on morphological attributes such as film thickness, orientation, crystallinity, film density, and stoichiometry. These structural characteristics are controlled by tuning the PVD process parameters, yet undesirable alterations in the structure often occur due to process variations between deposition runs. Nondestructive film diagnostics can enable improved yield and serve as a means of tuning a deposition process, thus enabling quality control and materials exploration. Grazing incidence X-ray diffraction (GIXRD) for MoS 2 film characterization provides valuable information about film density and grain orientation (texture). However, the determination of film stoichiometry can only be indirectly inferred via GIXRD. The combination of density and microstructure via GIXRD with chemical composition via grazing incidence X-ray fluorescence (GIXRF) enables the isolation and decoupling of film density, composition, and microstructure and their ultimate impact on film layer thickness, thereby improving coating thickness predictions via X-ray fluorescence. We have augmented an existing GIXRD instrument with an additional X-ray detector for the simultaneous measurement of energy-dispersive X-ray fluorescence spectra during the GIXRD analysis. This combined GIXRD/GIXRF analysis has proven synergetic for correlating chemical composition to the structural aspects of MoS 2 films provided by GIXRD. We present the usefulness of the combined diagnostic technique via exemplar MoS 2 film samples and provide a discussion regarding data extraction techniques of grazing angle series measurements.

MoS2↗

DOE OSTI2024

First search for an anomalous excess of charged-current $\nu_e$ interactions without visible pions using the full MicroBooNE dataset

This public note presents an investigation of low-energy electron-neutrino events in the Fermilab Booster Neutrino Beam by the MicroBooNE experiment. This search is motivated by the excess of low energy electromagnetic events observed by the MiniBooNE experiment and, more broadly, by the landscape of neutrino anomalies observed at short baselines. This is the first measurement to use all of the data collected by the MicroBooNE experiment, corresponding to $1.1\times 10^{21}$ protons on target. Two exclusive samples of electron neutrinos without visible pions are used, one with visible protons and one without any visible protons. MicroBooNE data is compared to two empirical models of the MiniBooNE low energy excess, one obtained by enhancing the electron-neutrino content as a function of the neutrino energy, and one representing the excess for the first time as a function of the kinematics of shower energy and angle. This measurement excludes an electron-like interpretation of the MiniBooNE excess based on these models at $\geq 99\%$ confidence level in all kinematic variables.

43 PARTICLE ACCELERATORS↗

DOE OSTI2025

Silylsilane‐Substituted Polymers: Fluorine‐Free, Liquid Repellent, and Hydrolytically Stable Alternatives to Siloxanes

Abstract Per‐ and polyfluoroalkyl substances (PFAS) are omniphobic and exceptionally stable, making them ideal for a wide range of materials applications. However, as “forever chemicals”, their exceptional persistence and bioaccumulation have generated an increasing amount of environmental and health concerns, prompting the search for fluorine‐free alternatives. Siloxane‐based materials are therefore interesting to examine as PFAS alternatives due to their low surface energy and hydrophobicity but suffer from hydrolytic instability of Si─O linkages. To address this challenge, a novel methacrylate monomer, 3‐[tris(trimethylsilyl)silyl]propyl methacrylate (M‐silyl), is designed containing Si─Si bonds rather than Si─O bonds of siloxanes. Polymers derived from M‐silyl (P‐silyl) is prepared by controlled free radical polymerization and compared with their siloxane analogues after coating on silicon wafers. Contact angle (CA) measurements confirmed P‐silyl to be hydrophobic (advancing/receding water CA = 109.7°/83.0°), with a low‐hysteresis for oil (lyophobic) (hexadecane CA hysteresis = 2.0°), comparable to its siloxane‐based counterpart. Importantly, P‐silyl maintained these surface properties after exposure to acidic or basic conditions, while siloxane analogues lost hydrophobicity. Consequently, the incorporation of Si ─ Si linkages into the design of the polymer enables chemically stable, fluorine‐free alternatives for water‐repellent and low hysteresis surface coatings and advances the design of fluorine‐free functional materials.

fluorine-free↗

DOE OSTI2025

Reconfigurable Magnetotransport in MnBi 2 Te 4 via Gate and Magnetic Field Tuning

The intrinsic magnetic topological insulator MnBi 2 Te 4 is a promising platform for exploring quantum phases with nontrivial band topology and for enabling electrical control over coupled magnetic and electronic phase transitions. In-plane magnetic fields, in particular, offer a distinct means of tuning these properties by strengthening quantized Hall effects, enhancing surface energy gaps, and driving spin reorientation transitions. However, a systematic understanding of how such fields affect magnetotransport is limited. Here, the magnetotransport behavior of few-layer MnBi 2 Te 4 as a function of gate voltage, temperature, and magnetic field angle, with a primary focus on in-plane field effects, are investigated. A gate-tunable crossover in magnetoresistance is observed from positive to negative values under in-plane magnetic fields as the gate voltage is swept below the charge neutrality point at temperatures below the Néel temperature. The in-plane field drives a transition from the antiferromagnetic ground state to a ferromagnetic configuration with spins aligned in-plane, while simultaneously altering the electronic structure, as revealed by gate-dependent transport features. The angle-dependent measurements reveal strongly gate-tunable magnetotransport anisotropy. These results establish in-plane magnetic fields as an effective tuning parameter for modulating spin and charge transport in MnBi 2 Te 4 , advancing prospects for reconfigurable spintronic and topological devices.

MnBi 2 Te 4↗

DOE OSTI2026

Magnetic structure of topological nodal-line semimetal EuSb 2

Here, we investigated the magnetic structure of the magnetic topological nodal-line semimetal EuSb 2 using x-ray resonant magnetic scattering at the Eu 𝐿 3 absorption edge. Forbidden magnetic reflections confirm antiferromagnetic ordering with propagation vector 𝐪 = (0.5,0,0) below 𝑇 N ≈ 27 K. Azimuthal-angle-dependent measurements reveal that the Eu moments are aligned along the monoclinic 𝑏 axis. Comparison between the measured 𝐐-dependent magnetic Bragg peak intensities and calculations based on representation analysis identifies the magnetic structure as the A-type antiferromagnetic 𝛤 4 representation with a (++−−) arrangement along the 𝑎 direction. These results establish the microscopic magnetic structure of EuSb 2 and provide a basis for understanding the interplay between antiferromagnetism and topological electronic states in this system.

36 MATERIALS SCIENCE↗

DOE OSTI2026

The role of focusing geometry in MeV x-ray production from petawatt laser–solid interaction

Relativistic laser–plasma interactions provide a compact and flexible route to generating bright, ultrashort pulses of MeV x rays, with applications in high-energy density science, nuclear physics, and radiography. Despite extensive study of intensity scaling in laser-driven electron acceleration, the role of focusing geometry and focal-volume effects in MeV radiation production remains insufficiently understood. Here, we present experimental and kinetic simulation results from the Texas Petawatt Laser (120 J, 140 fs) in which the focusing geometry (f/3 or f/1.5) is varied, while the laser energy and pulse duration are fixed. Experimentally, the f/3 geometry produces approximately three times more MeV radiation than the f/1.5 geometry, despite its twofold lower nominal vacuum intensity. This result is based on the time-integrated radiation per unit solid angle, as measured along the diagnostic line of sight. Three-dimensional particle-in-cell simulations reproduce this trend when a modest (10s of μm) effective focal plane shift is introduced, demonstrating that relativistic laser–plasma coupling is highly sensitive to focal geometry in the presence of a preplasma. This behavior is consistent with differences in interaction length and effective intensity at the critical surface between the two configurations. The sensitivity of the tightly focused f/1.5 configuration ($z_R ≈$⁠ 5 μ m) reflects the combined influence of thermal lensing and an extended preplasma, while the f/3 geometry (⁠$z_R ≈$ 80 μ m) remains comparatively robust. These results demonstrate a breakdown of conventional intensity scaling and identify focusing geometry as a critical control parameter for MeV electron and x-ray generation at petawatt powers. Implications for laser–plasma-based radiographic facilities are also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

Nernst power factor and figure of merit in the compensated semimetal ScSb

Recently, topological semimetals have emerged as strong candidates for solid-state thermomagnetic refrigerators due to their enhanced Nernst effect. This enhancement arises from the combined contributions of the Berry-curvature-induced anomalous Nernst coefficient associated with topological bands and the normal Nernst effect resulting from synergistic electron-hole compensation. Generally, these two effects are intertwined in topological semimetals, making it challenging to evaluate them independently. Here, we report the observation of a high Nernst effect in the electron-hole compensated semimetal ScSb with topologically trivial electronic band structures. Remarkably, we find a high maximum Nernst power factor of 𝑃⁢𝐹 𝑁 ∼ 35 × 10 −4 W m −1 K −2 in ScSb. The Nernst thermopower (𝑆 𝑥⁢𝑦 ) exhibits a peak of ∼ 47 µ⁢V/K at 12 K and 14 T, yielding a Nernst figure of merit (𝑧 𝑁 ) of ∼ 28 × 10 −4 K −1 . Notably, despite its trivial electronic band structure, both the 𝑃⁢𝐹 𝑁 and 𝑧 𝑁 values of ScSb are comparable to those observed in topological semimetals with Dirac band dispersions. In conclusion, the origin of the large Nernst signal in ScSb is explained by compensated electron and hole carriers, through Hall resistivity measurements, angle-resolved photoemission spectroscopy, and density functional theory calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

Mapping the three-dimensional fermiology of the triangular lattice magnet EuAg 4 Sb 2

In this paper, we report the temperature-field phase diagram as well as present a comprehensive study of the electronic structure and three-dimensional fermiology of the triangular-lattice magnet EuAg 4 ⁢Sb 2 , utilizing quantum oscillation measurements, angle-resolved photoemission spectroscopy, and first-principles calculations. The complex magnetic phase diagram of EuAg 4 ⁢Sb 2 highlights many transitions through nontrivial AFM states. Shubnikov-de Haas and de Haas-van Alphen oscillations were observed in the polarized ferromagnetic state of EuAg 4 ⁢Sb 2 , revealing three pairs of distinct spin-split frequency branches with small effective masses. A comparison of the angle-dependent oscillation data with first-principles calculations in the ferromagnetic state and angle-resolved photoemission spectra shows good agreement, identifying tubular hole pockets and hourglass-shaped hole pockets at the Brillouin zone center, as well as diamond-shaped electron pockets at the zone boundary. As the temperature increases, the frequency branches of the tiny hourglass pockets evolve into a more cylindrical shape, while the larger pockets remain unchanged. This highlights that variations in exchange splitting, driven by changes in the magnetic moment, primarily impact the small Fermi pockets without significantly altering the overall band structure. As a result, this is consistent with first-principles calculations, which show minimal changes near the Fermi level across ferromagnetic and simple antiferromagnetic states or under varying on-site Coulomb repulsion.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Chiral flat-band optical cavity with atomically thin mirrors

A fundamental requirement for photonic technologies is the ability to control the confinement and propagation of light. Widely used platforms include two-dimensional (2D) optical microcavities in which electromagnetic waves are confined in either metallic or distributed Bragg reflectors. Recently, transition metal dichalcogenides hosting tightly bound excitons with high optical quality have emerged as promising atomically thin mirrors. In this work, we propose and experimentally demonstrate a subwavelength 2D nanocavity using two atomically thin mirrors with degenerate resonances. Angle-resolved measurements show a flat band, which sets this system apart from conventional photonic cavities. We demonstrate how the excitonic nature of the mirrors enables the formation of chiral and tunable optical modes upon the application of an external magnetic field. Moreover, we show the electrical tunability of the confined mode. Our work demonstrates a mechanism for confining light with high-quality excitonic materials, opening perspectives for spin-photon interfaces, and chiral cavity electrodynamics.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Co-Design of Charge Transport Superhighways to Connect Catalytic Sites in Soft Photoelectrochemical Systems

Efficient photon-to-electron-to-molecule conversion requires multi-length scale control over charge transport pathways, where electronic charges are delivered to catalytic sites under high mass transport flux. A fundamental question is how can we co-design charge transport pathways to promote efficient charge transfer to/from catalytic sites in complex three-dimensional architectures? Soft conducting polymer systems offer exceptional promise to provide three-dimensional charge transport networks, where electrolyte (ion and solvent) can interdiffuse to promote long-lived charge carriers and the molecular nature allows for strategic synthetic design of catalytic sites. Herein we combine theoretical and experimental approaches to investigate the earliest stages of photoelectrochemical deposition of near-surface catalytic sites (Pt) on soft bulk heterojunction polymeric semiconductors composed of a prototype donor (PTB7-Th) and a prototype acceptor (N2200) as a model system towards better understanding molecular catalyst-polymer site interactions. We focus initially on photoelectrochemical deposition of low Pt loadings, nanoparticle sizes (formed by progressive nucleation) below 20 nm, for both density functional theory (DFT) modeling studies and for spectroscopic characterization using surface-sensitive X-ray and UV-photoemission (XPS/UPS). DFT modeling of “n-type” N2200 slabs reveal for the first time that sulfur atoms in the thiophene units serve as the lowest-energy adsorption sites for single Pt atoms, while larger Pt clusters engage more complexly with both thiophene and naphthalene diimide (NDI) core sites. Changes in chemical composition observed by X-ray photoelectron spectroscopy (XPS) support the DFT predictions, and the angle-resolved measurements reveal that Pt nucleation initiates at subsurface sites which appear to be localized active domains that promote charge transport/transfer and enable vertical growth toward the surface. These results suggest that light-activated Pt nanoparticle deposition decorates energetically distinct sites, where photoactivity is dictated by the local energetics of those sites, and the fact that they represent the termini of charge transport “super-highways” – a small percentage of the total volume of the donor/acceptor polymeric active layer which carries most of the photocurrent generated during both Pt deposition and photoelectrochemical HER. We posit that these initial studies provide a foundational strategy for design of catalytic sites in the near surface regions of complex polymeric materials and advancing soft semiconductor-based photoelectrochemical systems. Achieving a nanometer-scale understanding of catalyst deposition and the impact of local composition and energetics on that placement, should ultimately provide the design guidelines (co-design) for a broad array of catalysts at sites that optimize that efficiency and maximize platform durability.

14 SOLAR ENERGY↗

DOE OSTI2026

Automated tape-target centering based on template matching for construction measurement tasks using robotic total station

Robotic total stations have transformed surveying and construction mapping through precise, efficient, and automated measurements. These instruments integrate a theodolite, which measures horizontal and vertical angles, with an electronic distance measurement (EDM) unit to determine distances, allowing accurate 3D measurement of observable points. Traditionally, users manually aimed the total station at a target. Recent advancements in robotic motor control and integration of cameras now enable automatic rotation and aiming, typically requiring only a single operator to position the target. Automated aiming is commonly performed using retroreflector prisms, which reflect light back to the source with minimal scattering, enabling high-precision measurements over long distances. However, retroreflectors, especially those designed for 360 degree, can be expensive and impractical for certain applications. This paper presents an algorithm for automating the center detection of low-cost disposable tape targets using the total station's onboard camera and a template matching algorithm. The algorithm identifies the target's center pixel in the image, and the instrument is commanded to aim at that location. We evaluated the performance of this template-matching-based centering method under various distances, angles, lighting conditions, and field environments, comparing its results to both manual aiming and conventional automated aiming of tape targets. Manual aiming was used as the baseline operational reference in the absence of an independent ground-truth measurement. The proposed approach achieves target centering results comparable to the manual baseline. This method provides a cost-effective alternative for high-precision applications where retroreflector targets are constrained by budget or logistics.

Harrington, Joshua [ORNL]↗

DOE OSTI2025

Conducting Beyond the Standard Model Searches in the MicroBooNE Detector with Machine Learning

MicroBooNE is one of the three neutrino detectors that comprise the Short Baseline Neutrino program at Fermilab. It utilizes Liquid Argon Time Projection Chamber (LArTPC) technology to probe the anomalous excess of electron-like events seen by its predecessor, MiniBooNE. Additionally, it provides a rich avenue of study for Beyond the Standard Model (BSM) theories. In the GeV energy regime relevant to MicroBooNE's beam neutrino program, many such theories lead to signatures which produce electron-positron (e+e-) final-states in the detector. While photons can pair produce into e+e- pairs with negligible opening angles, BSM theories often predict e+e- pairs with a broader range of opening angles. Thus, developing a tool that can reliably measure the opening angles of e+e- events is crucial for conducting rigorous BSM studies. However, these e+e- pairs result in topologically complex showers instead of clean tracks, making non-machine learning (ML) based methods such as line-fitting unsuitable for this task. This poster discusses the effectiveness of ML, namely a graph neural network called PointNet++, in accomplishing this goal. Our studies show promising results, with a resolution for the opening angle of 5 or less.

Bhelande, Vedang Adutya [Los Alamos]↗

DOE OSTI2025

Angular dependent measurement of electron-ion recombination in liquid argon for ionization calorimetry in the ICARUS liquid argon time projection chamber

This paper reports on a measurement of electron-ion recombination in liquid argon in the ICARUS liquid argon time projection chamber (LArTPC). A clear dependence of recombination on the angle of the ionizing particle track relative to the drift electric field is observed. An ellipsoid modified box (EMB) model of recombination describes the data across all measured angles. These measurements are used for the calorimetric energy scale calibration of the ICARUS TPC, which is also presented. The impact of the EMB model is studied on calorimetric particle identification, as well as muon and proton energy measurements. Accounting for the angular dependence in EMB recombination improves the accuracy and precision of these measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2024

Measurement of the effective leptonic weak mixing angle

Using pp collision data at $\sqrt{s}$ = 13 TeV, recorded by the LHCb experiment between 2016 and 2018 and corresponding to an integrated luminosity of 5.4 fb −1 , the forward-backward asymmetry in the pp → Z/γ* → μ + μ − process is measured. The measurement is carried out in ten intervals of the difference between the muon pseudorapidities, within a fiducial region covering dimuon masses between 66 and 116 GeV, muon pseudorapidities between 2.0 and 4.5 and muon transverse momenta above 20 GeV. These forward-backward asymmetries are compared with predictions, at next-to-leading order in the strong and electroweak couplings. The measured effective leptonic weak mixing angle is ${\sin}^2{\theta}_{\textrm{eff}}^{\ell }=0.23147\pm 0.00044\pm 0.00005\pm 0.00023,$ where the first uncertainty is statistical, the second arises from systematic uncertainties associated with the asymmetry measurement, and the third arises from uncertainties in the fit model used to extract ${\sin}^2{\theta}_{\textrm{eff}}^{\ell }$ from the asymmetry measurement. This result is based on an arithmetic average of results using the CT18, MSHT20, and NNPDF31 parameterisations of the proton internal structure, and is consistent with previous measurements and with predictions from the global electroweak fit.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2026

Superconducting Material Growth for Radio-Frequency (RF) Cavities

Superconducting radio-frequency (SRF) cavities, usually manufactured from Niobium (Nb), are vital components of modern particle accelerators because of their ability to achieve high acceleration gradients with little power dissipation. Naturally forming Nb surface oxides significantly alter cavity performance by changing surface resistance. A nondestructive characterization of oxide thickness is helpful for relating surface processing treatments to cavity performance. This work develops a protocol to measure Nb oxide thickness using Angle-Resolved X-ray Photoelectron Spectroscopy (ARXPS) while correcting instrumental errors. Using uniform bulk standard samples (Silver, Aluminum oxide, and Germanium), we determined a baseline correction factor to account for analyzer-related intensity evolution as the measurement angle increases. The correction factor was then applied to Nb 3d ARXPS data. Applying the Strohmeier equation to the corrected data yielded a Nb2O5 thickness of 6.04 nm, closely matching the 5.5 (±.05) nm value obtained from cross-sectional transmission electron microscopy. Our approach will bring a method to incorporate inherent errors in the thickness measurements using ARXPS and can be broadly applied to improve the accuracy of thickness measurements in a wide range of heterostructures.

Lambert, Nathan [Fermilab]↗