Search NASA⌕ Search

SEARCH · Search NASA

Results for “Aqueous speciation modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Photoreduction of gaseous oxidized mercury changes global atmospheric mercury speciation, transport and deposition

Anthropogenic mercury (Hg(0)) emissions oxidize to gaseous Hg(II) compounds, before deposition to Earth surface ecosystems. Atmospheric reduction of Hg(II) competes with deposition, thereby modifying the magnitude and pattern of Hg deposition. Global Hg models have postulated that Hg(II) reduction in the atmosphere occurs through aqueous-phase photoreduction that may take place in clouds. Here we report that experimental rainfall Hg(II) photoreduction rates are much slower than modelled rates. We compute absorption cross sections of Hg(II) compounds and show that fast gas-phase Hg(II) photolysis can dominate atmospheric mercury reduction and lead to a substantial increase in the modelled, global atmospheric Hg lifetime by a factor two. Models with Hg(II) photolysis show enhanced Hg (0) deposition to land, which may prolong recovery of aquatic ecosystems long after Hg emissions are lowered, due to the longer residence time of Hg in soils compared with the ocean. Fast Hg(II) photolysis substantially changes atmospheric Hg dynamics and requires further assessment at regional and local scales.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Development of a Trace Detection Method for Mercury Speciation in Hanford Tank Waste - 19014

The U.S. Department of Energy's (DOE) Hanford Site in southeast Washington State stores 56 million gallons of chemical and radioactive waste stored in underground tanks. Mercury species in liquid and solid fractions of Hanford tank waste pose a risk to the implementation and execution of DoE's River Protection Project mission due to mercury concentration limits imposed under waste acceptance criteria, toxicity characteristic leaching procedure restrictions for secondary waste disposal, and air emission permits. Although there is currently no processing of tank waste at Hanford, waste processing is imminent, and representative mercury inventory tracking will be important to anticipate and mitigate stack emissions and secondary liquid waste disposal issues. A methodology to accurately determine total mercury and mercury speciation in Hanford tank waste, while maintaining low mercury detection limits, currently does not exist at Hanford. Moreover, the mercury species in the waste solids are unknown and may be waste type-specific. The development of an analytical method to separate and speciate mercury in tank waste was undertaken by the Pacific Northwest National Laboratory (PNNL) while leveraging an existing non-radiological, ultra-trace mercury detection technique frequently performed at PNNL's Marine Sciences Laboratory in Sequim, Washington. The ultimate goal of this work is to develop an analytical method to obtain detailed mercury speciation information and update flowsheet modeling assumptions related to mercury partitioning at Hanford. The first phase of testing was completed in the development of an analytical methodology for the low-level determination of total mercury, elemental mercury, methylmercury, and dimethylmercury in Hanford tank waste. This paper presents Phase I testing which focused on determining whether mercury species can be preconcentrated from aqueous Hanford tank waste solution onto a solid substrate, while simultaneously eliminating or very significantly reducing the parent radionuclide activity. This was demonstrated by developing protocols for the separation and preconcentration of total mercury and methylmercury onto solid substrates, then measuring the substrates for radiological content at PNNL's Radiochemical Processing Laboratory on the Hanford Site. The mercury content was successfully separated onto stable substrates and the radionuclide activity reduction was significant enough that the preconcentrated samples could be subjected to quantification using far less restrictive handling and radiological controls than would be required for the parent sample (i.e., contamination area fume hood vs. hot cell). This mercury separation method required no sample dilution, which enables maximum mercury detectability, while still allowing mercury speciation. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Uranium (VI) Adsorbate Structures on Portlandite [Ca(OH)2] Type Surfaces Determined by Computational Modelling and X-ray Absorption Spectroscopy

Portlandite [Ca(OH) 2 ] is a potentially dominant solid phase in the high pH fluids expected within the cementitious engineered barriers of Geological Disposal Facilities (GDF). This study combined X-ray Absorption Spectroscopy with computational modelling in order to provide atomic-scale data which improves our understanding of how a critically important radionuclide (U) will be adsorbed onto this phase under conditions relevant to a GDF environment. Such data are fundamental for predicting radionuclide mass transfer. Surface coordination chemistry and speciation of uranium with portlandite [Ca(OH) 2 ] under alkaline groundwater conditions (ca. pH 12) were determined by both in situ and ex situ grazing incidence extended X-ray absorption fine structure analysis (EXAFS) and by computational modelling at the atomic level. Free energies of sorption of aqueous uranyl hydroxides, [UO 2 (OH) n ] 2–n (n = 0–5) with the (001), (100) and (203) or (101) surfaces of portlandite are predicted from the potential of mean force using classical molecular umbrella sampling simulation methods and the structural interactions are further explored using fully periodic density functional theory computations. Although uranyl is predicted to only weakly adsorb to the (001) and (100) clean surfaces, there should be significantly stronger interactions with the (203/101) surface or at hydroxyl vacancies, both prevalent under groundwater conditions. The uranyl surface complex is typically found to include four equatorially coordinated hydroxyl ligands, forming an inner-sphere sorbate by direct interaction of a uranyl oxygen with surface calcium ions in both the (001) and (203/101) cases. In contrast, on the (100) surface, uranyl is sorbed with its axis more parallel to the surface plane. The EXAFS data are largely consistent with a surface structural layer or film similar to calcium uranate, but also show distinct uranyl characteristics, with the uranyl ion exhibiting the classic dioxygenyl oxygens at 1.8 Å and between four and five equatorial oxygen atoms at distances between 2.28 and 2.35 Å from the central U absorber. These experimental data are wholly consistent with the adsorbate configuration predicted by the computational models. These findings suggest that, under the strongly alkaline conditions of a cementitious backfill engineered barrier, there would be significant uptake of uranyl by portlandite to inhibit the mobility of U(VI) from the near field of a geological disposal facility.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Tonian Carbonates Record Phosphate-Rich Shallow Seas

The early-middle Neoproterozoic is thought to have witnessed significant perturbations to marine P cycling, in turn facilitating the rise of eukaryote-dominated primary production. However, with few robust constraints on aqueous P concentrations, current understanding of Neoproterozoic P cycling is generally model-dependent. To provide new geochemical constraints, we combined microanalytical data sets with solid-state Nuclear Magnetic Resonance, synchrotron-based X-ray Absorption Near Edge Structure spectroscopy, and micro-X-ray Fluorescence imaging to characterize the speciation and distribution of P in Tonian shallow-water carbonate rocks. These data reflect shallow water phosphate concentrations 10–100× higher than modern systems, supporting the hypothesis that tectonically-driven influxes in P periodically initiated kinetically-controlled CaCO 3 deposition, in turn destabilizing marine carbonate chemistry, climate, and nutrient inventories. Alongside these observations, a new compilation and statistical analysis of mudstone geochemistry data indicates that, in parallel, C org and P burial increased across later Tonian continental margins until becoming decoupled at the close of the Tonian, implicating widespread N-limitation triggered by increasing atmospheric O 2 .

58 GEOSCIENCES↗
DOE OSTI2021

Speciation Correlations between Uranium and Iodine

The National Nuclear Security Administration’s Office of Conversion has been supporting development of molybdenum-99 production methods utilizing non-highly enriched uranium targets. One of the novel methods being considered is the use of an aqueous homogeneous subcritical system. Concerns about controlling potentially volatile radioiodine have led to efforts to characterize the iodine species in this system. This report examined the potential to characterize the chemical species of the iodine by correlating it with analyses of uranium, which is more ubiquitous in the target material and suitable for on-line monitoring. Direct measurement of the iodine species would be infeasible due to the difficulty in performing analyses. The use of chemometric modeling utilizing spectral analyses is viable for the uranium measurements, however, a better understanding of the radiolytic effects of neutrons and the corresponding relationship between uranium and iodine is required to correlate any measurements to iodine speciation.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

National Energy Water Treatment and Speciation (NEWTS) Database & Dashboard

The Department of Energy's Office of Fossil Energy & Carbon Management (DOE/FECM) through the National Energy Technology Laboratory (NETL) has launched a free online tool, the National Energy Water Treatment and Speciation (NEWTS) Database and Dashboard, which can be utilized by community leaders and water researchers to better understand the composition of energy-related wastewater streams. The NEWTS Database and Dashboard provide public access to difficult-to-access datasets, including the original data sources and the processed data forms for input into aqueous chemistry modeling software. The data provided by the tool will help mitigate environmental risks and identify possible sources of valuable critical minerals (CM). The goal of this ASME Power presentation is to highlight the data and capabilities of this free online-tool for obtaining high quality water datasets in formats that are easy for modeling the treatment and recovery of valuable resources from effluent waste stream associated with energy operations.

Siefert, Nicholas↗
NASA NTRS2013

Characterizing the Phyllosilicates and Amorphous Phases Found by MSL Using Laboratory XRD and EGA Measurements of Natural and Synthetic Materials

The Curiosity Rover landed on the Peace Vallis alluvial fan in Gale crater on August 5, 2012. A primary mission science objective is to search for past habitable environments, and, in particular, to assess the role of past water. Identifying the minerals and mineraloids that result from aqueous alteration at Gale crater is essential for understanding past aqueous processes at the MSL landing site and hence for interpreting the site's potential habitability. X-ray diffraction (XRD) data from the CheMin instrument and evolved gas analyses (EGA) from the SAM instrument have helped the MSL science team identify phases that resulted from aqueous processes: phyllosilicates and amorphous phases were measure in two drill samples (John Klein and Cumberland) obtained from the Sheepbed Member, Yellowknife Bay Fm., which is believed to represent a fluvial-lacustrine environment. A third set of analyses was obtained from scoop samples from the Rocknest sand shadow. Chemical data from the APXS instrument have helped constrain the chemical compositions of these secondary phases and suggest that the phyllosilicate component is Mg-enriched and the amorphous component is Fe-enriched, relatively Si-poor, and S- and H-bearing. To refine the phyllosilicate and amorphous components in the samples measured by MSL, we measured XRD and EGA data for a variety of relevant natural terrestrial phyllosilicates and synthetic mineraloids in laboratory testbeds of the CheMin and SAM instruments. Specifically, Mg-saturated smectites and vermiculites were measured with XRD at low relative humidity to understand the behavior of the 001 reflections under Mars-like conditions. Our laboratory XRD measurements suggest that interlayer cation composition affects the hydration state of swelling clays at low RH and, thus, the 001 peak positions. XRD patterns of synthetic amorphous materials, including allophane, ferrihydrite, and hisingerite were used in full-pattern fitting (FULLPAT) models to help determine the types and abundances of amorphous phases in the martian rocks and sand shadow. These models suggest that the rocks and sand shadow are composed of approx 30% amorphous phases. Sulfate-adsorbed allophane and ferrihydrite were measured by EGA to further understand the speciation of the sulfur present in the amorphous component. These data indicate that sulfate adsorbed onto the surfaces of amorphous phases could explain a portion of the SO2 evolution in the Rocknest SAM data. The additional constraints placed on the mineralogy and chemistry of the aqueous alteration phases through our laboratory measurements can help us better understand the nature of the fluids that affected the different samples and devise a history of aqueous alteration for the Sheepbed Member of the Yellowknife Bay Fm. at Gale crater.

Rampe, Elizabeth B.↗
DOE OSTI2022

Electrical Conductivities and Association Constants in Dilute Aqueous NdCl 3 Solutions from 298 to 523 K along an Isobar of 25 MPa

Here, electrical measurements were performed in dilute aqueous NdCl 3 solutions from 298 to 523 K along the 25 MPa isobar to obtain limiting conductivities and association constants. The specific conductivity data were estimated using a continuous flow cell and a Markov Chain Monte Carlo (MCMC) correction algorithm. The limiting conductivities for the salts in water were derived by regressing the mean spherical approximation model and speciation analyses based on the MCMC algorithm and the deep earth water model. The limiting conductivities derived from the experimental data were correlated using the Zimmerman-Arcis-Tremaine correlation and agreed well with a predictive correlation proposed by Smolyakov, Anderko, and Lencka. Only the first association constant between neodymium and chloride could be derived at low temperatures (<373 K) due to the apparent large statistical uncertainty of the second association constant. Above 373 K, both association constants could be derived and show a reasonable agreement with Migdisov and Williams-Jones and Gammons et al.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

The Ionization Constants of DCO{sub 3}{sup -} and DPO{sub 4}{sup 2-} under Candu Reactor Primary Coolant Conditions by Raman Spectroscopy

The ionization constants of bicarbonate and hydrogen phosphate have been measured in light and heavy water up to 325 deg. C using Raman spectroscopy. Ionization constants in heavy water at temperatures above 100 deg. C have been measured for very few acids and bases. Together with other results, this work will be used to develop and verify models of the deuterium isotope effect on oxide solubilities in Candu reactor primary coolant. A custom-built titanium/sapphire flow cell was paired with a Horiba Jobin Yvon HR800 LabRAM system to collect Raman spectra of aqueous solutions under Candu primary coolant temperatures. The temperature-controlled cell is made of materials that are relatively inert under the extreme experimental conditions required for hydrothermal studies. Raman spectra were collected with detector polarizations parallel and perpendicular to the laser polarization. These were subtracted and corrected to obtain the reduced isotropic spectrum, which contains only symmetric vibrations, has a flat baseline, and has peak areas proportional to species concentration. Vibrational modes involving deuterium are shifted to lower wavenumbers in heavy water due to the increased mass of deuterium over hydrogen. The speciation between the two solvents is also measurably different. The relative concentration of the acidic species in solution increases with temperature, making its peaks easier to fit at high temperatures. The Raman band positions shift to lower wavenumbers with increasing temperature because the hydrogen bonding in bulk water begins to break down, which strengthens hydrogen bonding to the ions. The basic equilibrium constants were determined from the concentration of each species in solution combined with an activity coefficient model. A simplified form of the 'density' model was then fitted to the data. These fit results were combined with literature values of pK{sub w} in light and heavy water to determine the pK{sub a} values at saturation vapor pressure. The experimental results show excellent agreement with known literature values in light water where they exist at lower temperatures. These equilibrium constants are the first to be reported for both chemical systems in heavy water above 25 deg. C. This work extends the equilibrium constants in H{sub 2}O: - For HCO{sub 3}{sup -} from 250 deg. C to 325 deg. C; - For HPO{sub 4}{sup 2-} from 50 deg. C to 300 deg. C. These are the first ever ionization constants in D{sub 2}O for DPO{sub 4}{sup 2-} and the first values above 25 deg. C for DCO{sub 3}{sup -}. These results will be used to develop predictive models for the deuterium isotope effect on activated corrosion product transport under Candu nuclear reactor primary coolant conditions.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Modeling bicarbonate formation in an alkaline solution with multi-level quantum mechanics/molecular dynamics simulations

Understanding carbonate speciation and how it may be modulated is essential for the advancement of carbon dioxide (CO 2 ) capture and storage technologies, which often rely on the transformation of CO 2 into carbonate, e.g. via the formation of carbonate minerals. To date, few atomic-level, quantum-mechanics-based simulations have been carried out to characterize how carbonic acid (H 2 CO 3 ) and bicarbonate ($HCO^{-}_{3}$) form in aqueous solution, and how pH affects this process. Recently, Martirez and Carter utilized rare-event sampling density functional theory molecular dynamics simulations in combination with multi-level embedded correlated wavefunction theory, thus accounting for both solvent dynamics and electron correlation accurately, to elucidate the mechanism of H 2 CO 3 formation in neutral solution (J. Am. Chem. Soc., 145, 12561, 2023). Here, we perform a complementary simulation using the same method to map out the energetics of $HCO^{-}_{3}$ formation from dissolved CO 2 in basic solution. We find that, as in H 2 CO 3 formation, including water dynamics is important to obtain an accurate prediction of the energetics for the aforementioned reaction. Furthermore, only with MD did we identify the correct pathway for the reaction, in which water – not hydroxide – acts as the initial nucleophile and only at the transition state does it lose a proton.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS1992

Stratospheric aircraft exhaust plume and wake chemistry studies

This report documents progress to date in an ongoing study to analyze and model emissions leaving a proposed High Speed Civil Transport (HSCT) from when the exhaust gases leave the engine until they are deposited at atmospheric scales in the stratosphere. Estimates are given for the emissions, summarizing relevant earlier work (CIAP) and reviewing current propulsion research efforts. The chemical evolution and the mixing and vortical motion of the exhaust are analyzed to track the exhaust and its speciation as the emissions are mixed to atmospheric scales. The species tracked include those that could be heterogeneously reactive on the surfaces of the condensed solid water (ice) particles and on exhaust soot particle surfaces. Dispersion and reaction of chemical constituents in the far wake are studied with a Lagrangian air parcel model, in conjunction with a radiation code to calculate the net heating/cooling. Laboratory measurements of heterogeneous chemistry of aqueous sulfuric acid and nitric acid hydrates are also described. Results include the solubility of HCl in sulfuric acid which is a key parameter for modeling stratospheric processing. We also report initial results for condensation of nitric acid trihydrate from gas phase H2O and HNO3.

Miake-Lye, R. C.↗
DOE OSTI2026

The solubility and speciation of REE phosphate endmembers (CePO 4 and YPO 4 ) in Cl-rich aqueous fluids from 350 to 450 °C and implications for natural systems

The rare earth elements (REE) are important metals used increasingly in advanced technologies. Within the crust, the elements Ce and Y are commonly more abundant compared to other lanthanides and comprise important end-member constituents of REE-bearing minerals. Specifically, Ce is part of the light (L) REE which have larger ionic radii than the heavy (H) REE, which are grouped together with Y. These differences in ionic radius can lead to important physico-chemical trends within the lanthanide group. Despite a recent increase in experimental and thermodynamic data for the REE at high temperature and pressure, there is still a significant lack of these data at supercritical conditions. In this study we conducted batch-type experiments to measure the solubility of REE phosphates (CePO 4 and YPO 4 ) at varying starting pH (1.5–10), and salinity (0.01–1.4 mol/kg NaCl) at 350 and P sat , and from 400 to 450 °C at 700 bar. Results show that the solubility of Ce (33–0.14 ppb) is generally higher than Y (13–0.13 ppb) and that Ce complexes more strongly with both chloride and hydroxyl ligands compared to Y. The solubilities of both REE phosphates are highly pH-dependent and, to a lesser extent, depend on salinity at the studied conditions. The solubility data from this study were implemented into the GEMSFITS program to optimize the thermodynamic properties of Ce and Y hydroxyl and chloride species. The updated standard partial molal Gibbs energies of formation (Δ f G 0 T,P ) are used within the experimental temperature and pressure range to accurately predict the CePO 4 and YPO 4 solubility and Ce and Y speciation behavior. Based on the updated thermodynamic properties we also provide formation constants (log β n Cl,OH ) for Ce and Y hydroxyl and chloride species. Updated thermodynamic properties are applied to model REE-apatite dissolution and REE mobility based on the Pea Ridge iron oxide apatite deposit in Missouri, USA. The apatite dissolution model replicates natural observations including the replacement of monazite and xenotime after apatite and is an example of the utility of the new thermodynamic constants applied to supercritical crustal fluids. Furthermore, the findings of this study advance the predictive capabilities of geochemical models, our understanding of the behavior of individual REE, and permit modeling the overarching fractionation trends between LREE and HREE in supercritical crustal fluids.

58 GEOSCIENCES↗
DOE OSTI2020

Fast microflow kinetics and acid catalyst deactivation in glucose conversion to 5-hydroxymethylfurfural

5-Hydroxymethyl furfural (HMF) is an important platform chemical because it can be upgraded to various drop-in and performance-advantaged products. The cascade reaction of HMF production from glucose over a Lewis acid (CrCl 3 ) and a Brønsted acid (HCl) catalyst in aqueous media is investigated in a microreactor at short residence times and high temperatures. We study the formation of various chromium species using UV-visible spectrophotometry and elucidate the Cr(III) speciation. The catalyst reactivity increases sharply at short residence times, and then drops at long times. This indicates that the catalyst treatment plays a vital role in getting optimal reactivity, and recording the catalyst history is necessary. We develop a kinetic model to describe the catalyst speciation as well as the Lewis and Brønsted acid-catalyzed reaction kinetics using a hierarchical approach. Here, the model is in good agreement with experiments. We demonstrate the benefits of tandem Lewis-external added Brønsted acid catalysis in processing time, productivity, and catalyst stability. We apply this model to optimize the HMF yield and obtain ~36% yield at 200 °C in 7 min and report the highest productivity of ~15% yield per min, demonstrating the opportunity of reaching high productivity at short residence times.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Single rhenium atoms on nanomagnetite: Probing the recharge process that controls the fate of rhenium in the environment

Understanding the redox transitions that control rhenium geochemistry is central to paleoredox and geochronology studies, as well as predicting the fate of chemically similar hazardous oxyanions in the environment such as pertechnetate. However, detailed mechanistic information regarding rhenium redox transitions in anoxic systems is scarce. Here, we performed a comprehensive laboratory study of rhenium redox transitions on variably oxidized magnetite nanoparticle surfaces. Through high-end spectroscopic and microscopic tools, we propose an abiotic transition pathway in which aqueous iron(II) ions in the presence of pure or preoxidized magnetite serve as an electron source to reduce rhenium(VII) to individual rhenium(IV) atoms or small polynuclear species on nanoparticle surfaces. Notably, iron(II) ions recharged preoxidized magnetite nanoparticles exhibit a maghemite core and a magnetite shell, challenging the traditional core-shell magnetite-maghemite model. This study provides a fundamental understanding of redox processes governing rhenium fate and transport in the environment and enables an improved basis for predicting its speciation in geochemical systems.

Science & Technology - Other Topics↗
DOE OSTI2023

Pertechnetate/perrhenate–capped Zr/Hf–Dihydroxide Dimers: Elucidating Zr–TcO 4 Co–Mobility in the Nuclear Fuel Cycle

Spent nuclear fuel contains heavy element fission products that must be separated for effective reprocessing for a safe and sustainable nuclear fuel cycle. 93 Zr and 99 Tc are high-yield fission products that co-transport in liquid-liquid extraction processes. Here we seek atomic-level information of this co-extraction process, as well as fundamental knowledge about Zr IV (and Hf IV ) aqueous speciation in the presence of topology-directing ligands such as pertechnetate (TcO 4 – ) and non-radioactive surrogate perrhenate (ReO 4 – ). In this context, we show that the flat tetrameric oxyhydroxyl-cluster [M IV 4 (OH) 8 (H 2 O) 16 ] 8+ (and related polymers) is dissociated by perrhenate/pertechnetate to yield isostructural dimers, M 2 (OH) 2 (XO 4 – ) 6 (H 2 O) 6 • 3H 2 O (M=Zr/Hf IV ; X=Re/Tc VII ), elucidated by single-crystal X-ray diffraction. We used these model compounds to understand the pervasive 93 Zr- 99 Tc coextraction with further speciation studies in water, nitric acid, and tetrabutylphosphate (TBP) -kerosene; where the latter two media are relevant to nuclear fuel reprocessing. SAXS (small angle X-ray scattering), compositional evaluation, and where experimentally feasible, ESI-MS (electrospray ionization mass spectrometry) showed that perrhenate/pertechnetate influence Zr/Hf IV -speciation in water. Here, in Zr-XO 4 solvent extraction studies to simulate fuel reprocessing, we provide evidence that TcO 4 – enhances extraction of Zr IV , and compositional analysis of the extracted metal-complexes (Zr-ReO 4 study) is consistent with the crystallized Zr IV 2 (OH) 2 (Re VII O 4 – ) 6 (H 2 O) 6 •dimer.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2019

Proton Chelating Ligands Drive Improved Chemical Separations for Rhodium

Current methods for the extraction of rhodium carry the highest carbon footprint and worst pollution metrics of all of the elements used in modern technological applications. Improving upon existing methods is made difficult by the limited understanding of the molecular-level chemistry occurring in extraction processes, particularly in the hydrometallurgical separation step. While many of the precious metals can be separated by solvent extraction, there currently exist no commercial extractants for Rh. This is due to its complicated mixed speciation upon leaching into hydrochloric acid, which gives rise to difficulties in designing effective reagents for solvent extraction. Herein we show that the diamidoamine reagent N-n-hexylbis(N-methyl-N-n-octylethylamide)amine transports Rh(III) from aqueous HCl into an organic phase as the monoaquated dianion [RhCl 5 (H 2 O)] 2– through the formation of an outer-sphere assembly; this assembly has been characterized by experimentation (slope analysis, FT-IR and NMR spectroscopy, EXAFS, SANS, and ESI-MS) and computational modeling. The paper demonstrates the importance of applying a broad range of techniques to obtain a convincing mode of action for the complex processes involved in anion recognition in the solution phase. A consistent and comprehensive understanding of how the ligand operates to achieve Rh(III) selectivity over the competitor anion Cl – has emerged. This knowledge will guide the design of extractants and thus offers promise for improving the sustainability of metal extraction from both traditional mining sources and the recycling of secondary source materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Neptunium (V) Solubility in the Presence and Absence of WIPP Relevant Ligands

CRA (Compliance Recertification Application)-2024 will update the oxidation state specific model used to calculate actinide solubility in the WIPP (Waste Isolation Pilot Plant). The pentavalent Np(V) ion is the most stable ion in solution within the An(V) series. This valence stability of Np(V) in aqueous solution makes Np a useful representative element for studying the aqueous complex chemistry of all An(V), but in the predicted WIPP scenario, this is the only TRU component that increases in the inventory with time as it is the main daughter product of 241 Am decay (alpha, n) so its relative importance increases throughout the 10,000-year performance period of the WIPP, it is only used to represent itself. This work is focused on confirming organic, borate and carbonate effects on solubility of Np(V) in WIPP simulated brines and 5 M NaCl and reassessing the predicted model speciation to strengthen the overall WIPP An(V) model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗